ADSL-LINE-EXT-MIB
AI MIB Summary
The ADSL-LINE-EXT-MIB extends the standard ADSL-LINE-MIB to monitor supplementary physical layer parameters and error statistics for Asymmetric Digital Subscriber Line (ADSL) interfaces, specifically tracking extended line status, signal-to-noise ratio margins, and line coding errors not covered in the base specification. This module enables granular fault isolation and performance analysis of DSLAM ports and customer premises equipment by providing detailed counters for line initialization failures, CRC errors, and specific attenuation metrics.
Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3440; see the RFC itself for full legal notices.
This MIB Module is a supplement to the ADSL-LINE-MIB [RFC2662].
Main OID:
adslExtMIB.1.3.6.1.2.1.10.94.3
70
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
adslExtMIBCopyright (C) The Internet Society (2002). This version of
this MIB module is part of RFC 3440; see the RFC itself for
full legal notices.
This MIB Module is a supplement to the ADSL-LINE-MIB
[RFC2662]. MODULE-IDENTITY .1.3.6.1.2.1.10.94.3 |
adslExtMibObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.94.3.1 |
adslLineExtTableThis table is an extension of RFC 2662. It
contains ADSL line configuration and
monitoring information. This includes the ADSL
line's capabilities and actual ADSL transmission
system. SEQUENCE OF AdslLineExtEntry .1.3.6.1.2.1.10.94.3.1.17 |
adslLineExtEntryAn entry extends the adslLineEntry defined in
[RFC2662]. Each entry corresponds to an ADSL
line. AdslLineExtEntry .1.3.6.1.2.1.10.94.3.1.17.1 |
adslLineTransAtucCapThe transmission modes, represented by a
bitmask that the ATU-C is capable of
supporting. The modes available are limited
by the design of the equipment.ro AdslTransmissionModeType .1.3.6.1.2.1.10.94.3.1.17.1.1 |
adslLineTransAtucConfigThe transmission modes, represented by a bitmask,
currently enabled by the ATU-C. The manager can
only set those modes that are supported by the
ATU-C. An ATU-C's supported modes are provided by
AdslLineTransAtucCap.rw AdslTransmissionModeType .1.3.6.1.2.1.10.94.3.1.17.1.2 |
adslLineTransAtucActualThe actual transmission mode of the ATU-C.
During ADSL line initialization, the ADSL
Transceiver Unit - Remote terminal end (ATU-R)
will determine the mode used for the link.
This value will be limited a single transmission
mode that is a subset of those modes enabled
by the ATU-C and denoted by
adslLineTransAtucConfig. After an initialization
has occurred, its mode is saved as the 'Current'
mode and is persistence should the link go
down. This object returns 0 (i.e. BITS with no
mode bit set) if the mode is not known.ro AdslTransmissionModeType .1.3.6.1.2.1.10.94.3.1.17.1.3 |
adslLineGlitePowerStateThe value of this object specifies the power
state of this interface. L0 is power on, L1 is
power on but reduced and L3 is power off. Power
state cannot be configured by an operator but it
can be viewed via the ifOperStatus object for the
managed ADSL interface. The value of the object
ifOperStatus is set to down(2) if the ADSL
interface is in power state L3 and is set to up(1)
if the ADSL line interface is in power state L0 or
L1. If the object adslLineTransAtucActual is set to
a G.992.2 (G.Lite)-type transmission mode, the
value of this object will be one of the valid power
states: L0(2), L1(3), or L3(4). Otherwise, its
value will be none(1).ro Enumeration .1.3.6.1.2.1.10.94.3.1.17.1.4 |
adslLineConfProfileDualLiteThis object extends the definition an ADSL line and
associated channels (when applicable) for cases
when it is configured in dual mode, and operating
in a G.Lite-type mode as denoted by
adslLineTransAtucActual. Dual mode exists when the
object, adslLineTransAtucConfig, is configured with
one or more full-rate modes and one or more G.Lite
modes simultaneously.
When 'dynamic' profiles are implemented, the value
of object is equal to the index of the applicable
row in the ADSL Line Configuration Profile Table,
AdslLineConfProfileTable defined in ADSL-MIB
[RFC2662].
In the case when dual-mode has not been enabled,
the value of the object will be equal to the value
of the object adslLineConfProfile [RFC2662].
When `static' profiles are implemented, in much
like the case of the object,
adslLineConfProfileName [RFC2662], this object's
value will need to algorithmically represent the
characteristics of the line. In this case, the
value of the line's ifIndex plus a value indicating
the line mode type (e.g., G.Lite, Full-rate) will
be used. Therefore, the profile's name is a string
concatenating the ifIndex and one of the follow
values: Full or Lite. This string will be
fixed-length (i.e., 14) with leading zero(s). For
example, the profile name for ifIndex that equals
'15' and is a full rate line, it will be
'0000000015Full'.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.10.94.3.1.17.1.5 |
adslAtucPerfDataExtTableThis table extends adslAtucPerfDataTable [RFC2662]
with additional ADSL physical line counter
information such as unavailable seconds-line and
severely errored seconds-line. SEQUENCE OF AdslAtucPerfDataExtEntry .1.3.6.1.2.1.10.94.3.1.18 |
adslAtucPerfDataExtEntryAn entry extends the adslAtucPerfDataEntry defined
in [RFC2662]. Each entry corresponds to an ADSL
line. AdslAtucPerfDataExtEntry .1.3.6.1.2.1.10.94.3.1.18.1 |
adslAtucPerfStatFastRThe value of this object reports the count of
the number of fast line bs since last
agent reset.ro Counter32 UNITS "line retrains" .1.3.6.1.2.1.10.94.3.1.18.1.1 |
adslAtucPerfStatFailedFastRThe value of this object reports the count of
the number of failed fast line retrains since
last agent reset.ro Counter32 UNITS "line retrains" .1.3.6.1.2.1.10.94.3.1.18.1.2 |
adslAtucPerfStatSesLThe value of this object reports the count of
the number of severely errored seconds-line since
last agent reset.ro Counter32 UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.3 |
adslAtucPerfStatUasLThe value of this object reports the count of
the number of unavailable seconds-line since
last agent reset.ro Counter32 UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.4 |
adslAtucPerfCurr15MinFastRFor the current 15-minute interval,
adslAtucPerfCurr15MinFastR reports the current
number of seconds during which there have been
fast retrains.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.5 |
adslAtucPerfCurr15MinFailedFastRFor the current 15-minute interval,
adslAtucPerfCurr15MinFailedFastR reports the
current number of seconds during which there
have been failed fast retrains.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.6 |
adslAtucPerfCurr15MinSesLFor the current 15-minute interval,
adslAtucPerfCurr15MinSesL reports the current
number of seconds during which there have been
severely errored seconds-line.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.7 |
adslAtucPerfCurr15MinUasLFor the current 15-minute interval,
adslAtucPerfCurr15MinUasL reports the current
number of seconds during which there have been
unavailable seconds-line.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.8 |
adslAtucPerfCurr1DayFastRFor the current day as measured by
adslAtucPerfCurr1DayTimeElapsed [RFC2662],
adslAtucPerfCurr1DayFastR reports the number
of seconds during which there have been
fast retrains.ro AdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.9 |
adslAtucPerfCurr1DayFailedFastRFor the current day as measured by
adslAtucPerfCurr1DayTimeElapsed [RFC2662],
adslAtucPerfCurr1DayFailedFastR reports the
number of seconds during which there have been
failed fast retrains.ro AdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.10 |
adslAtucPerfCurr1DaySesLFor the current day as measured by
adslAtucPerfCurr1DayTimeElapsed [RFC2662],
adslAtucPerfCurr1DaySesL reports the
number of seconds during which there have been
severely errored seconds-line.ro AdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.11 |
adslAtucPerfCurr1DayUasLFor the current day as measured by
adslAtucPerfCurr1DayTimeElapsed [RFC2662],
adslAtucPerfCurr1DayUasL reports the
number of seconds during which there have been
unavailable seconds-line.ro AdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.12 |
adslAtucPerfPrev1DayFastRFor the previous day, adslAtucPerfPrev1DayFastR
reports the number of seconds during which there
were fast retrains.ro AdslPerfPrevDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.13 |
adslAtucPerfPrev1DayFailedFastRFor the previous day,
adslAtucPerfPrev1DayFailedFastR reports the number
of seconds during which there were failed fast
retrains.ro AdslPerfPrevDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.14 |
adslAtucPerfPrev1DaySesLFor the previous day, adslAtucPerfPrev1DaySesL
reports the number of seconds during which there
were severely errored seconds-line.ro AdslPerfPrevDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.15 |
adslAtucPerfPrev1DayUasLFor the previous day, adslAtucPerfPrev1DayUasL
reports the number of seconds during which there
were unavailable seconds-line.ro AdslPerfPrevDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.18.1.16 |
adslAtucIntervalExtTableThis table provides one row for each ATU-C
performance data collection interval for
ADSL physical interfaces whose
IfEntries' ifType is equal to adsl(94). SEQUENCE OF AdslAtucIntervalExtEntry .1.3.6.1.2.1.10.94.3.1.19 |
adslAtucIntervalExtEntryAn entry in the
adslAtucIntervalExtTable. AdslAtucIntervalExtEntry .1.3.6.1.2.1.10.94.3.1.19.1 |
adslAtucIntervalFastRFor the current interval, adslAtucIntervalFastR
reports the current number of seconds during which
there have been fast retrains.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.19.1.1 |
adslAtucIntervalFailedFastRFor the each interval, adslAtucIntervalFailedFastR
reports the number of seconds during which
there have been failed fast retrains.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.19.1.2 |
adslAtucIntervalSesLFor the each interval, adslAtucIntervalSesL
reports the number of seconds during which
there have been severely errored seconds-line.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.19.1.3 |
adslAtucIntervalUasLFor the each interval, adslAtucIntervalUasL
reports the number of seconds during which
there have been unavailable seconds-line.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.19.1.4 |
adslAturPerfDataExtTableThis table contains ADSL physical line counters
not defined in the adslAturPerfDataTable
from the ADSL-LINE-MIB [RFC2662]. SEQUENCE OF AdslAturPerfDataExtEntry .1.3.6.1.2.1.10.94.3.1.20 |
adslAturPerfDataExtEntryAn entry extends the adslAturPerfDataEntry defined
in [RFC2662]. Each entry corresponds to an ADSL
line. AdslAturPerfDataExtEntry .1.3.6.1.2.1.10.94.3.1.20.1 |
adslAturPerfStatSesLThe value of this object reports the count of
severely errored second-line since the last agent
reset.ro Counter32 UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.20.1.1 |
adslAturPerfStatUasLThe value of this object reports the count of
unavailable seconds-line since the last agent
reset.ro Counter32 UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.20.1.2 |
adslAturPerfCurr15MinSesLFor the current 15-minute interval,
adslAturPerfCurr15MinSesL reports the current
number of seconds during which there have been
severely errored seconds-line.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.20.1.3 |
adslAturPerfCurr15MinUasLFor the current 15-minute interval,
adslAturPerfCurr15MinUasL reports the current
number of seconds during which there have been
available seconds-line.ro PerfCurrentCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.20.1.4 |
adslAturPerfCurr1DaySesLFor the current day as measured by
adslAturPerfCurr1DayTimeElapsed [RFC2662],
adslAturPerfCurr1DaySesL reports the
number of seconds during which there have been
severely errored seconds-line.ro AdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.20.1.5 |
adslAturPerfCurr1DayUasLFor the current day as measured by
adslAturPerfCurr1DayTimeElapsed [RFC2662],
adslAturPerfCurr1DayUasL reports the
number of seconds during which there have been
unavailable seconds-line.ro AdslPerfCurrDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.20.1.6 |
adslAturPerfPrev1DaySesLFor the previous day, adslAturPerfPrev1DaySesL
reports the number of seconds during which there
were severely errored seconds-line.ro AdslPerfPrevDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.20.1.7 |
adslAturPerfPrev1DayUasLFor the previous day, adslAturPerfPrev1DayUasL
reports the number of seconds during which there
were severely errored seconds-line.ro AdslPerfPrevDayCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.20.1.8 |
adslAturIntervalExtTableThis table provides one row for each ATU-R
performance data collection interval for
ADSL physical interfaces whose
IfEntries' ifType is equal to adsl(94). SEQUENCE OF AdslAturIntervalExtEntry .1.3.6.1.2.1.10.94.3.1.21 |
adslAturIntervalExtEntryAn entry in the
adslAturIntervalExtTable. AdslAturIntervalExtEntry .1.3.6.1.2.1.10.94.3.1.21.1 |
adslAturIntervalSesLFor the each interval, adslAturIntervalSesL
reports the number of seconds during which
there have been severely errored seconds-line.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.21.1.1 |
adslAturIntervalUasLFor the each interval, adslAturIntervalUasL
reports the number of seconds during which
there have been unavailable seconds-line.ro PerfIntervalCount UNITS "seconds" .1.3.6.1.2.1.10.94.3.1.21.1.2 |
adslConfProfileExtTableThe adslConfProfileExtTable extends the ADSL line
profile configuration information in the
adslLineConfProfileTable from the ADSL-LINE-MIB
[RFC2662] by adding the ability to configure the
ADSL physical line mode. SEQUENCE OF AdslConfProfileExtEntry .1.3.6.1.2.1.10.94.3.1.22 |
adslConfProfileExtEntryAn entry extends the adslLineConfProfileEntry
defined in [RFC2662]. Each entry corresponds to an
ADSL line profile. AdslConfProfileExtEntry .1.3.6.1.2.1.10.94.3.1.22.1 |
adslConfProfileLineTypeThis object is used to configure the ADSL physical
line mode. It has following valid values:
noChannel(1), when no channels exist.
fastOnly(2), when only fast channel exists.
interleavedOnly(3), when only interleaved channel
exist.
fastOrInterleaved(4), when either fast or
interleaved channels can exist, but only one
at any time.
fastAndInterleaved(5), when both the fast channel
and the interleaved channel exist.
In the case when no value has been set, the default
Value is noChannel(1).rw Enumeration .1.3.6.1.2.1.10.94.3.1.22.1.1 |
adslAlarmConfProfileExtTableThis table extends the
adslLineAlarmConfProfileTable and provides
threshold parameters for all the counters defined
in this MIB module. SEQUENCE OF AdslAlarmConfProfileExtEntry .1.3.6.1.2.1.10.94.3.1.23 |
adslAlarmConfProfileExtEntryAn entry extends the adslLineAlarmConfProfileTable
defined in [RFC2662]. Each entry corresponds to
an ADSL alarm profile. AdslAlarmConfProfileExtEntry .1.3.6.1.2.1.10.94.3.1.23.1 |
adslAtucThreshold15MinFailedFastRThe first time the value of the corresponding
instance of adslAtucPerfCurr15MinFailedFastR
reaches or exceeds this value within a given
15-minute performance data collection period,
an adslAtucFailedFastRThreshTrap notification
will be generated. The value '0' will disable
the notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.2.1.10.94.3.1.23.1.1 |
adslAtucThreshold15MinSesLThe first time the value of the corresponding
instance of adslAtucPerf15MinSesL reaches or
exceeds this value within a given 15-minute
performance data collection period, an
adslAtucSesLThreshTrap notification will be
generated. The value '0' will disable the
notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.2.1.10.94.3.1.23.1.2 |
adslAtucThreshold15MinUasLThe first time the value of the corresponding
instance of adslAtucPerf15MinUasL reaches or
exceeds this value within a given 15-minute
performance data collection period, an
adslAtucUasLThreshTrap notification will be
generated. The value '0' will disable the
notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.2.1.10.94.3.1.23.1.3 |
adslAturThreshold15MinSesLThe first time the value of the corresponding
instance of adslAturPerf15MinSesL reaches or
exceeds this value within a given 15-minute
performance data collection period, an
adslAturSesLThreshTrap notification will be
generated. The value '0' will disable the
notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.2.1.10.94.3.1.23.1.4 |
adslAturThreshold15MinUasLThe first time the value of the corresponding
instance of adslAturPerf15MinUasL reaches or
exceeds this value within a given 15-minute
performance data collection period, an
adslAturUasLThreshTrap notification will be
generated. The value '0' will disable the
notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.2.1.10.94.3.1.23.1.5 |
adslExtTraps OBJECT IDENTIFIER .1.3.6.1.2.1.10.94.3.1.24 |
adslExtAtucTraps OBJECT IDENTIFIER .1.3.6.1.2.1.10.94.3.1.24.1 |
adslExtAtucTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.2.1.10.94.3.1.24.1.0 |
adslAtucFailedFastRThreshTrapFailed Fast Retrains 15-minute threshold reached. NOTIFICATION-TYPE .1.3.6.1.2.1.10.94.3.1.24.1.0.1 |
adslAtucSesLThreshTrapSeverely errored seconds-line 15-minute threshold
reached. NOTIFICATION-TYPE .1.3.6.1.2.1.10.94.3.1.24.1.0.2 |
adslAtucUasLThreshTrapUnavailable seconds-line 15-minute threshold
reached. NOTIFICATION-TYPE .1.3.6.1.2.1.10.94.3.1.24.1.0.3 |
adslExtAturTraps OBJECT IDENTIFIER .1.3.6.1.2.1.10.94.3.1.24.2 |
adslExtAturTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.2.1.10.94.3.1.24.2.0 |
adslAturSesLThreshTrapSeverely errored seconds-line 15-minute threshold
reached. NOTIFICATION-TYPE .1.3.6.1.2.1.10.94.3.1.24.2.0.1 |
adslAturUasLThreshTrapUnavailable seconds-line 15-minute threshold
reached. NOTIFICATION-TYPE .1.3.6.1.2.1.10.94.3.1.24.2.0.2 |
adslExtConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.94.3.2 |
adslExtGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.94.3.2.1 |
adslExtCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.94.3.2.2 |