ADN-ENV-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ADN-ENV-MIB.
536
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
536 total| Object Name |
|---|
adnFranpTrunkEnvMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.1 |
adnFrtChanSiTableThis table is internal for use by FRANP Signalling for
the purpose of debugging. SEQUENCE OF AdnFrtChanSiEntry .1.3.6.1.4.1.637.3.1.8.5.1.1 |
adnFrtChanSiEntryAn entry in the Signalling Trunk Channel Table. There
will be one entry for each FRANP Signalling Trunk
channel configured. This table will also be indexed by
adnFrtChanSiIndex in order to be able to access
individual trace entries. AdnFrtChanSiEntry .1.3.6.1.4.1.637.3.1.8.5.1.1.1 |
adnFrtChanSiIndexThis entry represents the current instance or index of
the table. It is provided in order to be able to dump
each instance of each object.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.1.1.1 |
adnFrtChanSiResourceAvailThis timer specifies the amount of time to wait for a
resource available message to be sent to FRANP Path
Select SwBB. If the timer expires, then the message
is transmitted. This is expressed in SECONDS. The
timer may be set by SNMP command.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.1.1.2 |
adnFrtChanSiBWThresholdThe threshold value is specified as a percentage of
the BAT. If the available bandwidth drops below
this threshold, the resource available message sent
to FRANP Path Select component. The value may be
set by SNMP command.rw AdnPercent .1.3.6.1.4.1.637.3.1.8.5.1.1.1.3 |
adnFrtChanSiCcbThis is the internal BINARY trace area for call
control information trace area, maintained by
FRANP_SI. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.1.1.4 |
adnFrtChanSiTraceCntlThis object provides a mechanism for controlling
Franp Signalling ability to enable/disable tracing
data from its Bus side, Trunk side, and Ism side.
The following are the possible values it can hold.
1 - Trace activity enabled (normally is defaulted on)
2 - Trace activity disabledrw INTEGER .1.3.6.1.4.1.637.3.1.8.5.1.1.1.5 |
adnFrtChanSiTraceSizeThis object provides a mechanism for defining the
number of entries the Franp Signalling trace area
can have. Be aware when issuing a set command to
modify this value, any existing trace data will be
lost to make room for the new trace block size.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.1.1.1.6 |
adnFrtChanSiTraceAreaThis is the internal BINARY message trace entry
maintained by FRANP_SI for its 3 main interfaces,
(Bus side, Trunk side, and Ism side). This entry
is instantiated by AdnFrtChanSiInstance index that
comprises the entire trace area table. The FRANP
Signalling software is implemented as a Finite
State Machine, and all message events received
are stored here. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.1.1.7 |
adnFrtChanSiBsiStatThis is the internal BINARY statistic trace table
maintained by FRANP_SI for this Bus Side interface.
The Franp Signalling software is implemented as a
Finite State Machine, and all statistics collected
are stored here. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.1.1.8 |
adnFrtChanSiTsiStatThis is the internal BINARY statistic trace table
maintained by FRANP_SI for this Trunk Side interface.
The Franp Signalling software is implemented as a
Finite State Machine, and all statistics collected
are stored here. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.1.1.9 |
adnFrtChanSiBsiCrfaThis is the internal BINARY call reference active
trace maintained by FRANP_SI for this Bus Side
interface. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.1.1.10 |
adnFrtChanSiTsiCrfaThis is the internal BINARY call reference active
trace maintained by FRANP_SI for this Trunk Side
interface. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.1.1.11 |
adnFrtChanSiTsiBwiThis is the internal BINARY Bandwidth Information
table maintained by FRANP_SI for this Trunk Side
interface. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.1.1.12 |
adnFrtChanSiMinDlyPctThis field is used to calculate the minimum delay change
a periodic delay measurement can consider to be significant.
Such significant delay changes may result in a new delay
reported to ROUTES.
The minimum delay change is calulated by multiplying this
field as a percentage times the delay measured immediately
after a RESTART/RESTART ACK exchange.rw AdnPercent .1.3.6.1.4.1.637.3.1.8.5.1.1.1.13 |
adnFrtChanSiMinDlyAmtIf the minimum delay change calculated using adnFrtChanSiMinDlyPct
is less than this field, the minimum delay change a periodic
delay measurement can consider to be significant is set equal
to this field instead of the calculated value.rw INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.8.5.1.1.1.14 |
adnFrtChanSiDlyPersisBefore a periodic delay measurement can report a new delay
value to ROUTES, a specified number of consecutive
measurements must be significantly high OR a specified
number of consecutive measurements must be significantly low.
This field defines that specified number of consecutive
measurements.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.1.1.1.15 |
adnFrtChanSwTableThis table contains internal channel level
information for FRANP_SW. There is no existing
standard MIB for Alcatel internal network
protocol. SEQUENCE OF AdnFrtChanSwEntry .1.3.6.1.4.1.637.3.1.8.5.1.2 |
adnFrtChanSwEntryAn entry in the internal FRANP Switching Channel
Table. There will be one entry for each FRANP
channel configured AdnFrtChanSwEntry .1.3.6.1.4.1.637.3.1.8.5.1.2.1 |
adnFrtChanSwFRSIThis is the BINARY internal channel structure
maintained by FRSI portion of FRANP_SW for this
channel. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.2.1.3 |
adnFrtChanSwIWFThis is the BINARY internal channel structure
maintained by TPX/F IWF portion of FRANP_SW
for this channel. It is placed here for
maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.2.1.4 |
adnFrtChanSwFRSIMsgtraceThis is the internal BINARY message trace
table maintained by FRSI portion of FRANP_SW
for this channel. It is placed here for
maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.2.1.5 |
adnFrtVCSiTableThis is the PVC table for FRANP trunk protocol. SEQUENCE OF AdnFrtVCSiEntry .1.3.6.1.4.1.637.3.1.8.5.1.3 |
adnFrtVCSiEntryPVC table entry AdnFrtVCSiEntry .1.3.6.1.4.1.637.3.1.8.5.1.3.1 |
adnFrtVCSiBsiCrfThis is the Bus Side Interface call reference associated
with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.1 |
adnFrtVCSiBsiStateDefine here are the state that are implemented and
supported for the FRANP Signalling bus Side
Interface.rw AdnFrtVCStates .1.3.6.1.4.1.637.3.1.8.5.1.3.1.2 |
adnFrtVCSiTsiCrfThis is the Trunk Side Interface call reference
associated with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.3 |
adnFrtVCSiTsiStateDefine here are the state that are implemented and
supported for the FRANP Signalling Trunk Side
Interface.rw AdnFrtVCStates .1.3.6.1.4.1.637.3.1.8.5.1.3.1.4 |
adnFrtVCSiLocalSuidThis is the local Suid associated with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.5 |
adnFrtVCSiLocalLpxThis is the local LPX associated with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.6 |
adnFrtVCSiLocalMcmpThis is the local Maximum Congestion Monitoring Period
associated with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.7 |
adnFrtVCSiLocalApplThis is the local Application reference number associated
with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.8 |
adnFrtVCSiLocalDataThis is the local Data Handler reference number associated
with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.9 |
adnFrtVCSiLocalFranpSiThis is the local Franp Signalling reference number
associated with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.10 |
adnFrtVCSiLocalifIndexThis indicates the ifindex of the remote Chassis/Slot/
Port/Channel.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.11 |
adnFrtVCSiRemoteSuidThis is the remote Suid associated with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.12 |
adnFrtVCSiRemoteLpxThis is the remote Lpx associated with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.13 |
adnFrtVCSiRemoteMcmpThis is the remote Maximum Congestion Monitoring period
associated with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.14 |
adnFrtVCSiRemoteApplThis is the remote Application reference number associated
with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.15 |
adnFrtVCSiRemoteDataThis is the remote Data Handler reference number associated
with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.16 |
adnFrtVCSiRemoteFranpSiThis is the remote Franp Signalling reference number
associated with the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.17 |
adnFrtVCSiRemoteifIndexThis indicates the ifindex of the remote Chassis/Slot/
Port/Channel.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.18 |
adnFrtVCSiBsiTimerThis is the timer ID that is currently running for this VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.19 |
adnFrtVCSiTsiTimerThis is the timer ID that is currently running for this VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.3.1.20 |
adnFrtVCSiBsiTimerExpCntThis is the number of times this Bus Side Interface timer
ID has expired.ro Counter .1.3.6.1.4.1.637.3.1.8.5.1.3.1.21 |
adnFrtVCSiTsiTimerExpCntThis is the number of times this trunk Side Interface timer
ID has expired.ro Counter .1.3.6.1.4.1.637.3.1.8.5.1.3.1.22 |
adnFrtVCSwTableThis is the internal VC table for FRANP Switching. SEQUENCE OF AdnFrtVCSwEntry .1.3.6.1.4.1.637.3.1.8.5.1.4 |
adnFrtVCSwEntryPVC table entry AdnFrtVCSwEntry .1.3.6.1.4.1.637.3.1.8.5.1.4.1 |
adnFrtVCSwFRSIThis is the BINARY internal VC structure maintained
by the FRSI portion of FRANP_SW. It is placed here for
maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.4.1.1 |
adnFrtVCSwIWFThis is the BINARY internal VC structure maintained
by the TPX/F IWF portion of FRANP_SW. It is placed
here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.4.1.2 |
adnFrtVCSwFRSIMsgtraceThis is the internal BINARY message trace table
maintained by the FRSI portion of FRANP_SW for
this VC. It is placed here for maintenance purposes
only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.4.1.3 |
adnFrtSiTableThis is the FRANP Signalling table. It will exists
once per FRANP Signalling instance on each LT. SEQUENCE OF AdnFrtSiEntry .1.3.6.1.4.1.637.3.1.8.5.1.5 |
adnFrtSiEntryOne instance of the adnFrtSiTable. There will be
one instance for each FRANP Signalling on each LT. AdnFrtSiEntry .1.3.6.1.4.1.637.3.1.8.5.1.5.1 |
adnFrtSiTraceIndexThis entry represents the current instance or index.
It is provided in order to be able to dump
each Franp_si trace instance of each object.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.1.5.1.1 |
adnFrtSiTraceCntlThis object provides a mechanism for controlling
Franp Signalling ability to enable/disable tracing
data from its Bus side, Trunk side, and Ism side.
The following are the possible values it can hold.
1 - Trace activity enabled
2 - Trace activity disabled (default setting)rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.1.5.1.2 |
adnFrtSiTraceSizeThis object provides a mechanism for defining the
number of entries the Franp Signalling trace area
can have. Be aware when issuing a set command to
modify this value, any existing trace data will be
lost to make room for the new trace block size.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.1.5.1.3 |
adnFrtSiTraceAreaThis is the internal BINARY message trace entry
maintained by FRANP_SI for its 3 main interfaces,
(Bus side, Trunk side, and Ism side). This entry
is instanciated by AdnFrtSiInstance index that
comprises the entire trace area table. The FRANP
Signalling software is implemented as a Finite
State Machine, and all message events received
are stored here. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.5.1.4 |
adnFrtSiStatThis is the internal FRANP_SI data structure. This
will contain internal error counters and structures.
This is the internal table maintained by FRANP_SI.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.5.1.5 |
adnFrtSiStatISMTraceThis is the ISM message trace area. All ISM Messages
transmitted and received by FRANP_SI are stored here.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.5.1.6 |
adnFrtSwTableThis is the FRANP_SW table. It will exists once per
FRANP_SW instance on each LT. SEQUENCE OF AdnFrtSwEntry .1.3.6.1.4.1.637.3.1.8.5.1.6 |
adnFrtSwEntryOne instance of the adnFrtSwTable. There will be one
instance for each FRANP_SW on each LT. AdnFrtSwEntry .1.3.6.1.4.1.637.3.1.8.5.1.6.1 |
adnFrtSwStatFRSIThis is the internal FRSI data structure. This will
contain internal error counters and structures. This
is the internal table maintained by FRSI component of
FRANP_SW.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.6.1.1 |
adnFrtSwStatIWFThis is the internal IWF data structure. This will
contain internal error counters and structures. This
is the internal table maintained by IWF component of
FRANP_SW.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.6.1.2 |
adnFrtSwStatISMTraceThis is the ISM message trace area. All ISM Messages
transmitted and received by FRSI component of FRANP_SW
are stored here. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.1.6.1.3 |
adnFrsEnvMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.2 |
adnFrChanPrivateTableThis table is an extension of the Frame Relay Management
Signalling Group table and the Frame Relay Logical Port Group
table from RFC1604. SEQUENCE OF AdnFrChanPrivateEntry .1.3.6.1.4.1.637.3.1.8.5.2.1 |
adnFrChanPrivateEntryAn entry in the Channel Table. There will be one entry for each
FRS channel configured AdnFrChanPrivateEntry .1.3.6.1.4.1.637.3.1.8.5.2.1.1 |
adnFrChanPrivateSwitchThis is the BINARY internal channel structure maintained by FRS_SW.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.1.1.1 |
adnFrChanPrivateSignallingThis is the BINARY internal channel structure maintained by FRS_SI.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.1.1.2 |
adnFrChanPrivateSwMsgtraceThis is the internal BINARY message trace table maintained by
FRS_SW for this channel. The FRS_SW software is implemented as
a Finite State Machine, and all events received and their corresponding
states are stored here.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.1.1.3 |
adnFrChanPrivateSiMsgtraceThis is the internal BINARY message trace table maintained by
Channel Management portion of FRS_SI for this VC.
The Channel Management software is implemented as
a Finite State Machine, and all events received and their corresponding
states are stored here.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.1.1.4 |
adnFrVCPrivateTableThis is the PVC table extensions. The PVC End-Point Table in
RFC1604 is not sufficient for our HSS network. These fields are
the extensions to it SEQUENCE OF AdnFrVCPrivateEntry .1.3.6.1.4.1.637.3.1.8.5.2.2 |
adnFrVCPrivateEntryPVC table entry AdnFrVCPrivateEntry .1.3.6.1.4.1.637.3.1.8.5.2.2.1 |
adnFrVCPrivateSwitchThis is the BINARY internal PVC structure maintained by FRS_SW.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.2.1.1 |
adnFrVCPrivateSignallingThis is the BINARY internal PVC structure maintained by FRS_SI.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.2.1.2 |
adnFrVCPrivateSwMsgtraceThis is the internal BINARY message trace table maintained by
FRS_SW for this VC. The FRS_SW software is implemented as
a Finite State Machine, and all events received and their corresponding
states are stored here.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.2.1.3 |
adnFrVCPrivateSiMsgtraceThis is the internal BINARY message trace table maintained by
PVC handler portion of FRS_SI for this VC.
The PVC handler software is implemented as
a Finite State Machine, and all events received and their corresponding
states are stored here.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.2.1.4 |
adnFrTableThis is the FRS table. It will exists once per FRS instance
on each LT. SEQUENCE OF AdnFrEntry .1.3.6.1.4.1.637.3.1.8.5.2.3 |
adnFrEntryOne instance of the adnFRSTable. There will be one instance for
each FRS on each LT. AdnFrEntry .1.3.6.1.4.1.637.3.1.8.5.2.3.1 |
adnFrStatSignallingThis is the internal FRS data structure. This will contain
internal error counters and structures. This is the internal table
maintained by FRS_SI.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.3.1.1 |
adnFrStatSwitchingThis is the internal FRS data structure. This will contain
internal error counters and structures. This is the internal table
maintained by FRS_SW.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.3.1.2 |
adnFrStatISMTraceThis is the ISM message trace area. All ISM Messages transmitted
and received by FRS_SI are stored here.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.2.3.1.3 |
adnLdrEnvMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.3 |
adnLdrEnvTableThis is the LDR software building block table. Each LDR on each
LT has one. It mainly contains debug information. SEQUENCE OF AdnLdrEnvEntry .1.3.6.1.4.1.637.3.1.8.5.3.1 |
adnLdrEnvEntryThere will be one instance for each LDR on each LT. AdnLdrEnvEntry .1.3.6.1.4.1.637.3.1.8.5.3.1.1 |
adnLdrSoftStatusThis is the internal LDR data structure. It contains
the internal error counters and other information of
the LDR Software status. This is the internal table
maintained by LDR.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.3.1.1.1 |
adnLdrISMTraceThis is the ISM message trace area. All ISM Messages transmitted
and received by FRS_SI are stored here.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.3.1.1.2 |
adnLdrChanEnvTableThis table contains internal channel structure maintained by LDR.
It is used for maintenance purposes only. SEQUENCE OF AdnLdrChanEnvEntry .1.3.6.1.4.1.637.3.1.8.5.3.2 |
adnLdrChanEnvEntryAn entry in the LDR Channel Environment Table. There will
be one entry for each LDR channel configured. AdnLdrChanEnvEntry .1.3.6.1.4.1.637.3.1.8.5.3.2.1 |
adnLdrChanTraceFlagFlag indicating if trace is enabled.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.8.5.3.2.1.1 |
adnLdrChanControlDataThis is the BINARY channel control block data structure
maintained by the LDR. It is placed here for maintenance
purposes onlyro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.3.2.1.2 |
adnLdrChanCmeMsgTraceThis is the trace area for LDR and CME-SUP interface. The
information of messages that sent and received by the LDR
are stored here.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.3.2.1.3 |
adnLdrChanInmpFuncTraceThis is the trace area for LDR and INMP Library interface.
Function call information (LDR functions called by INMP
Library, and functions in INMP Library called by LDR) are
recorded here.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.3.2.1.4 |
adnIsnaEnvMib OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.4 |
adnIsnaIcIntTableThis is the ISNA Internal Connection diagnostic table definitions.
It is an extension to the adnIsnaIcTable definitions. SEQUENCE OF AdnIsnaIcIntEntry .1.3.6.1.4.1.637.3.1.8.5.4.1 |
adnIsnaIcIntEntryInternal ISNA IC level diagnostic table. Uses indeces
'adnIsnaIcifIndex and 'adnIsnaIcDlci' defined in
'adnIsnaIcTable' table. AdnIsnaIcIntEntry .1.3.6.1.4.1.637.3.1.8.5.4.1.1 |
adnIsnaIcIntifIndexThis object defines the 1st half of the Internal Connection defined
in the 'adnIsnaIcTable' and is one to one mapping to 'adnIsnaIcifIndex'
object.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.4.1.1.1 |
adnIsnaIcIntDlciThis object defines the 2nd half of the Internal Connection defined
in the 'adnIsnaIcTable' and is one to one mapping to 'adnIsnaIcDlci'
object.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.4.1.1.2 |
adnIsnaIcIpOutPktsThe total number of packets transmitted by ISNA to the IP layer
that are associated with a given Internal Connectionro Counter .1.3.6.1.4.1.637.3.1.8.5.4.1.1.3 |
adnIsnaIcIpInPktsThe total number of packets received by ISNA from the IP layer
that are associated with a given Internal Connectionro Counter .1.3.6.1.4.1.637.3.1.8.5.4.1.1.4 |
adnIsnaIcIssOutPktsThe total number of ISS status packets transmitted by ISNA to ISOM
that are associated with a given Internal Connectionro Counter .1.3.6.1.4.1.637.3.1.8.5.4.1.1.5 |
adnIsnaIcIssInPktsThe total number of ISS status packets received by ISNA from ISOM
that are associated with a given Internal Connectionro Counter .1.3.6.1.4.1.637.3.1.8.5.4.1.1.6 |
adnIsnaIcIcmpIntPktsThe total number of ICMP packets received by ISNA from the local
IP layer that are associated with a given Internal Connectionro Counter .1.3.6.1.4.1.637.3.1.8.5.4.1.1.7 |
adnIsnaIcIcmpExtPktsThe total number of ICMP packets transmitted by ISNA to the local
IP layer that are associated with a given Internal Connectionro Counter .1.3.6.1.4.1.637.3.1.8.5.4.1.1.8 |
adnIsnaIcIpOutDiscardsThe total number of IP packets destined to IP layer, discarded due to
internal IP access failures or system resources errors. All packets
discarded are associated with a given Internal Connection.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.1.1.9 |
adnIsnaIcIpInDiscardsThe total number of IP packets received from IP layer, discarded due
to internal ICS access failures or system resources errors. All packets
discarded are associated with a given Internal Connection.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.1.1.10 |
adnIsnaIcIcbMsgtraceThis is the internal BINARY message trace table maintained by
ISNA for this IC/PVC. The ISNA software is implemented as
a Finite State Machine, and all events received and their corresponding
states are stored here.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.4.1.1.11 |
adnIsnaIpTableThis is the ISNA IP diagnostic table definitions. SEQUENCE OF AdnIsnaIpEntry .1.3.6.1.4.1.637.3.1.8.5.4.2 |
adnIsnaIpEntryISNA IP Trafic counters level diagnostic table. Uses index
'adnIsnaIpIndex' defined in 'adnIsnaIpTable' table. AdnIsnaIpEntry .1.3.6.1.4.1.637.3.1.8.5.4.2.1 |
adnIsnaIpIndexThis object is mapped to adnIsnaIpIndex in the
adnIsnaIpTable.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.4.2.1.1 |
adnIsnaIpNumOfLpxThe total number of LPXs (logical processor index) in
IIRT (IP ISNA routing table) table.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.2 |
adnIsnaIpNumOfInterfaceThe total number of Interfaces in IIRT (IP ISNA routing table) table.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.3 |
adnIsnaIpNumOfVcThe total number of VCs in IIRT (IP ISNA routing table) table.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.4 |
adnIsnaIpIpOutPktsThe total number of packets transmitted by ISNA_IP to the IP layer.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.5 |
adnIsnaIpIpInPktsThe total number of packets received by ISNA_IP from the IP layer.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.6 |
adnIsnaIpIpDiscardsThe total number of discarded IP packets coming from IP layer.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.7 |
adnIsnaIpIpomOutPktsThe total number of packets transmitted by ISNA_IP to IPOM sybsystem.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.9 |
adnIsnaIpIpomInPktsThe total number of packets received by ISNA_IP from IPOM subsytem.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.10 |
adnIsnaIpIpomDiscardsThe total number of discarded IP packets comming from IPOM subsystem.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.11 |
adnIsnaIpRdssInPktsThe total number of packets received by ISNA_IP from RDSS subsytem.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.13 |
adnIsnaIpRdssOutPktsThe total number of packets transmitted by ISNA_IP to RDSS sybsystem.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.14 |
adnIsnaIpRdssDiscardsThe total number of discarded IP packets comming from RDSS subsystem.ro Counter .1.3.6.1.4.1.637.3.1.8.5.4.2.1.15 |
adnIsnaIpIirtTableThis is the ISNA IP IIRT (IP ISNA routing table) tree table definitions. SEQUENCE OF AdnIsnaIpIirtEntry .1.3.6.1.4.1.637.3.1.8.5.4.3 |
adnIsnaIpIirtEntryISNA IP IIRT (IP ISNA routing table) tree entry table. Uses index
'adnIsnaIpIirtIpaddrs' defined in 'adnIsnaIpIirtTable' table. AdnIsnaIpIirtEntry .1.3.6.1.4.1.637.3.1.8.5.4.3.1 |
adnIsnaIpIirtIpaddrsThe next hop IP address .ro IpAddress .1.3.6.1.4.1.637.3.1.8.5.4.3.1.1 |
adnIsnaIpIirtVcNumThe VC number on the local Interface, The NHIPA (next
hop IP address) apply to
the remote interface which the VC is connecting.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.4.3.1.2 |
adnIsnaIpIirtIfIndexThe ifindex Interface at the local machine.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.4.3.1.3 |
adnIsnaIpIirtLpxNumThe LPX (logical processor index) local which the interface
is configured on.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.4.3.1.5 |
adnIsnaIpIirtSesidThe session id which IP packet is routed to.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.4.3.1.6 |
adnIsnaIpIirtVcStateThe status of the VC (up or down) which associate with NHIPA
(next hop IP address.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.4.3.1.7 |
adnNodeSupervisionEnvMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.5 |
adnBoardMiscTableThis is the board miscellaneous characteristics table. SEQUENCE OF AdnBoardMiscEntry .1.3.6.1.4.1.637.3.1.8.5.5.1 |
adnBoardMiscEntryAn entry in the Board Miscellaneous
characteristics Table.
There is one entry for each Board.
The index corresponds to equipment
type 'card' in the adnEquipTable. AdnBoardMiscEntry .1.3.6.1.4.1.637.3.1.8.5.5.1.1 |
adnBoardMiscISLThis object contains the characteristics of the board
retrieved through the ISL link. This object
is a dump of 256 bytes of the EEPROM of the board,
It contains information called 'group 2' information.
The signification of each byte is detailed in
the document 8BA00940001ASZZA.
When the board is not plugged in, the value of this
object is 00 00 00 00 ( that is, an octet string of
length 4, with each octet having a zero decimal value).ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.5.1.1.1 |
adnAtmBoardErrCounterTableThis table is the ATM boards error counter table.
Each counter corresponds to a defect number
identified by a bit set in the adnAtmBoardASEStatus
for ASe board, the adnAtmBoardCIGStatus for CIG
board and the adnAtmBoardHSCStatus for HSC board.
These nominators are defined in the
adnAtmBoardErCounterTable.
The counters are classified according to the board
type. Some are specific to the broadband ATM
switching element (BBASE) board also called the
matrix board.deprecated SEQUENCE OF AdnAtmBoardErrCounterEntry .1.3.6.1.4.1.637.3.1.8.5.5.2 |
adnAtmBoardErrCounterEntryAn entry in the ATM boards error counter table.deprecated AdnAtmBoardErrCounterEntry .1.3.6.1.4.1.637.3.1.8.5.5.2.1 |
adnAtmBoardErrUFOFCounterThe counter associated with the number of user
FIFO overflows;
counter #0 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.1 |
adnAtmBoardErrUFRFCounterThe counter associated with the number of user
FIFO read failures;
counter #1 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.2 |
adnAtmBoardErrNFOFCounterThe counter associated with the number of network
FIFO overflows;
counter #2 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.3 |
adnAtmBoardErrPHTRAMPCounterThe counter associated with the number of BGPHT
chip RAM parity errors;
counter #3 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.4 |
adnAtmBoardErrNFRFCounterThe counter associated with the number of network
FIFO read failures;
counter #4 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.5 |
adnAtmBoardErrNAVCCounterThe counter associated with the number of cells
received on non active VC;
counter #5 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.6 |
adnAtmBoardErrNAVPCounterThe counter associated with the number of cells
received on non active VP;
counter #6 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.7 |
adnAtmBoardErrRBOFCounterThe counter associated with the number of
reception buffer overflows;
counter #7 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.8 |
adnAtmBoardErrQRP0RAMPCounterThe counter associated with the number of QRP 0
chip RAM parity errors;
counter #14 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.9 |
adnAtmBoardErrQRP0DMACounterThe counter associated with the number of QRP 0
chip DMA errors;
counter #15 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.10 |
adnAtmBoardErrQRP0FIFOCounterThe counter associated with the number of QRP 0
chip extraction FIFO overflows;
counter #16 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.11 |
adnAtmBoardErrQRP1RAMPCounterThe counter associated with the number of QRP 1
chip RAM parity errors;
counter #17 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.12 |
adnAtmBoardErrQRP1DMACounterThe counter associated with the number of QRP 1
chip DMA errors;
counter #18 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.13 |
adnAtmBoardErrQRP1FIFOCounterThe counter associated with the number of QRP 1
chip extraction FIFO overflows;
counter #19 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.14 |
adnAtmBoardErrQRP2RAMPCounterThe counter associated with the number of QRP 2
chip RAM parity errors;
counter #20 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.15 |
adnAtmBoardErrQRP2DMACounterThe counter associated with the number of QRP 2
chip DMA errors;
counter #21 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.16 |
adnAtmBoardErrQRP2FIFOCounterThe counter associated with the number of QRP 2
chip extraction FIFO overflows;
counter #22 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.17 |
adnAtmBoardErrQRP3RAMPCounterThe counter associated with the number of QRP 3
chip RAM parity errors;
counter #23 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.18 |
adnAtmBoardErrQRP3DMACounterThe counter associated with the number of QRP 3
chip DMA errors;
counter #24 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.19 |
adnAtmBoardErrQRP3FIFOCounterThe counter associated with the number of QRP 3
chip extraction FIFO overflows;
counter #25 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.20 |
adnAtmBoardErrHMP0LLPCCounterThe counter associated with the number of
low priority cells lost due to SCD;
counter #26 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.21 |
adnAtmBoardErrHMP0LHPCCounterThe counter associated with the number of
high priority cells lost due to buffer overflow(FULC);
counter #27 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.22 |
adnAtmBoardErrHMP0SYNCCounterThe counter associated with the number of fault
synchronization in the HMP 0 chip;
counter #28 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.23 |
adnAtmBoardErrHMP1LLPCCounterThe counter associated with the number of
low priority cells lost in the HMP 1 chip;
counter #29 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.24 |
adnAtmBoardErrHMP1LHPCCounterThe counter associated with the number of
high priority cells lost in the HMP 1 chip;
counter #30 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.25 |
adnAtmBoardErrHMP1SYNCCounterThe counter associated with the number of fault
synchronization in the HMP 1 chip;
counter #31 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.2.1.26 |
adnAtmBoardTrCounterTableThis table is the ATM boards traffic counter
table.
The counters are classified according to the board
type. Some are specific to the broadband ATM
switching element (BBASE) board also called the
matrix board.deprecated SEQUENCE OF AdnAtmBoardTrCounterEntry .1.3.6.1.4.1.637.3.1.8.5.5.3 |
adnAtmBoardTrCounterEntryAn entry in the ATM boards traffic counter table.deprecated AdnAtmBoardTrCounterEntry .1.3.6.1.4.1.637.3.1.8.5.5.3.1 |
adnAtmBoardTrHMP0MTCounterThe counter associated with the observation
threshold 1 crossing of the HMP 0 chip;
counter #0 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.3.1.1 |
adnAtmBoardTrHMP1MTCounterThe counter associated with the observation
threshold 2 crossing of the HMP 1 chip;
counter #1 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.3.1.2 |
adnAtmBoardTrFPTMICICounterThe counter associated with the number of free
outgoing point-to-multipoint (PTM) internal channel
identifiers (ICI);
counter #2 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Gauge .1.3.6.1.4.1.637.3.1.8.5.5.3.1.3 |
adnAeiPortErrCounterTableThis table is the ATM electrical interface (AEI)
port error counter table.
Each counter corresponds to a defect number
identified by a bit set in the adnAtmPortASEStatus
for ASe board, the adnAtmPortCIGStatus for CIG
board and the adnAtmPortHSCStatus for HSC board.
These nominators are defined in the
adnAtmPortErCounterTable.
The counters are classified according to the board
type. Some are specific to the broadband ATM
switching element (BBASE) board also called the
matrix board.deprecated SEQUENCE OF AdnAeiPortErrCounterEntry .1.3.6.1.4.1.637.3.1.8.5.5.4 |
adnAeiPortErrCounterEntryAn entry in the ATM electrical interface (AEI) port
error counter table.deprecated AdnAeiPortErrCounterEntry .1.3.6.1.4.1.637.3.1.8.5.5.4.1 |
adnAeiPortErrOOSCounterThe counter associated with the out of
synchronization intervals;
counter #0 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.1 |
adnAeiPortErrLOSCounterThe counter associated with the loss of
synchronization intervals;
counter #1 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.2 |
adnAeiPortErrNFOFCounterThe counter associated with the number of network
FIFO overflows;
counter #2 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.3 |
adnAeiPortErrIEMRAMPCounterThe counter associated with the number of BGIEM
chip RAM parity errors;
counter #3 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.4 |
adnAeiPortErrCECHCounterThe counter associated with the number of
correctable errors on cells header;
counter #4 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.5 |
adnAeiPortErrUCECHCounterThe counter associated with the number of
uncorrectable errors on cells header;
counter #5 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.6 |
adnAeiPortErrCRCMA1CounterThe counter associated with the number of CRC
errors on payload field of maintenance active
cells of type 1 (MA1);
counter #6 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.7 |
adnAeiPortErrCRCSICCounterThe counter associated with the number of CRC
errors on payload field of self identified cells
(SIC);
counter #7 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.8 |
adnAeiPortErrNPECounterThe counter associated with the number of parity
errors on payload field of cells;
counter #8 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.9 |
adnAeiPortErrRTAGCounterThe counter associated with the number of
unallowed routing tags;
counter #9 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.10 |
adnAeiPortErrNMA1CounterThe counter associated with the number of lost
data maintenance cells;
counter #12 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.11 |
adnAeiPortErrEMA1CounterThe counter associated with the number of data
maintenance cells received with error;
counter #14 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.12 |
adnAeiPortErrNSFOFCounterThe counter associated with the number of
network/signalling FIFO overflows;
counter #17 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.13 |
adnAeiPortErrNFWFCounterThe counter associated with the number of network
FIFO write failures;
counter #18 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.14 |
adnAeiPortErrSFWFCounterThe counter associated with the number of
signalling FIFO write failures;
counter #19 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.15 |
adnAeiPortErrNSFRFCounterThe counter associated with the number of
network/signalling FIFO read failures;
counter #20 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.16 |
adnAeiPortErrUSFRFCounterThe counter associated with the number of
user/signalling FIFO read failures;
counter #22 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.17 |
adnAeiPortErrUFWFCounterThe counter associated with the number of user
FIFO write failures;
counter #23 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.18 |
adnAeiPortErrUSFOFCounterThe counter associated with the number of
user/signalling FIFO overflows;
counter #24 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.19 |
adnAeiPortErrNICICounterThe counter associated with the number of cells
received on non active internal channel identifier
(ICI);
counter #25 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.20 |
adnAeiPortErrNCRCCounterThe counter associated with the number of CRC
errors on network side;
counter #26 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.21 |
adnAeiPortErrNAALCounterThe counter associated with the number of
ATM adaptation layer (AAL)
sequence errors on network side;
counter #27 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.22 |
adnAeiPortErrUCRCCounterThe counter associated with the number of CRC
errors on user side;
counter #28 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.23 |
adnAeiPortErrUAALCounterThe counter associated with the number of
ATM adaptation layer (AAL)
sequence errors on user side;
counter #29 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.24 |
adnAeiPortErrURCCounterThe counter associated with the number of unrouted
cells;
counter #30 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.4.1.25 |
adnAeiPortTrCounterTableThis table is the ATM electrical interface (AEI) port
traffic counters table.
The counters are classified according to the board
type. Some are specific to the broadband ATM
switching element (BBASE) board also called the
matrix board.deprecated SEQUENCE OF AdnAeiPortTrCounterEntry .1.3.6.1.4.1.637.3.1.8.5.5.5 |
adnAeiPortTrCounterEntryAn entry in the ATM electrical interface (AEI) port
traffic counters table.deprecated AdnAeiPortTrCounterEntry .1.3.6.1.4.1.637.3.1.8.5.5.5.1 |
adnAeiPortTrPTPSetRqCounterThe counter associated with the number of
point-to-point (PTP) setup requests;
counter #1 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.1 |
adnAeiPortTrPTMSetRqCounterThe counter associated with the number of
point-to-multipoint (PTM) setup requests;
counter #2 of the ATM core.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.2 |
adnAeiPortTrPTPSetRjBCounterThe counter associated with the number of
point-to-point (PTP)
setup rejects due to blocking;
counter #3 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.3 |
adnAeiPortTrPTMSetRjBCounterThe counter associated with the number of
point-to-multipoint (PTM)
setup rejects due to blocking;
counter #4 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.4 |
adnAeiPortTrPTPSetRjCCounterThe counter associated with the number of
point-to-point (PTP)
setup rejects due to communication;
counter #5 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.5 |
adnAeiPortTrPTMSetRjCCounterThe counter associated with the number of
point-to-multipoint (PTM)
setup rejects due to communication;
counter #6 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.6 |
adnAeiPortTrPTPSetTrCounterThe counter associated with the number of
point-to-point (PTP) setup trials;
counter #7 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.7 |
adnAeiPortTrPTMSetTrCounterThe counter associated with the number of
point-to-multipoint (PTM) setup trials;
counter #8 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.8 |
adnAeiPortTrPTPCnxCounterThe counter associated with the number of
point-to-point (PTP) connections in progress;
counter #13 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Gauge .1.3.6.1.4.1.637.3.1.8.5.5.5.1.9 |
adnAeiPortTrPTMCnxCounterThe counter associated with the number of
point-to-multipoint (PTM) connections in progress;
counter #14 of the ATM core;
this counter is not relevant for the matrix board.rodeprecated Gauge .1.3.6.1.4.1.637.3.1.8.5.5.5.1.10 |
adnAeiPortTrPTPBWICIRqCounterThe counter associated with the number of
point-to-point (PTP) bandwith or internal
channel identifier (BW,ICI) requests;
counter #4 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.11 |
adnAeiPortTrPTMBWICIRqCounterThe counter associated with the number of
point-to-multipoint (PTM) bandwith or internal
channel identifier (BW,ICI) requests;
counter #5 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.12 |
adnAeiPortTrPTPBWRjCounterThe counter associated with the number of
point-to-point (PTP) bandwith (BW) requests failure;
counter #6 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.13 |
adnAeiPortTrPTMBWRjCounterThe counter associated with the number of
point-to-multipoint (PTM) bandwith (BW)
requests failure;
counter #7 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.14 |
adnAeiPortTrPTPICIRjCounterThe counter associated with the number of
point-to-point (PTP) internal channel identifier
(ICI) requests failure;
counter #8 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.15 |
adnAeiPortTrPTMICIRjCounterThe counter associated with the number of
point-to-multipoint (PTM) internal channel identifier
(ICI) requests failure;
counter #9 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.16 |
adnAeiPortTrPeakBWCounterThe counter associated with the reserved peak
bandwith (BW);
counter #10 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Gauge .1.3.6.1.4.1.637.3.1.8.5.5.5.1.17 |
adnAeiPortTrFPTPICICounterThe counter associated with the number of free
point-to-point (PTP) internal channel identifiers
(ICI);
counter #12 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Gauge .1.3.6.1.4.1.637.3.1.8.5.5.5.1.18 |
adnAeiPortTrMPriorBWCounterThe counter associated with the reserved mean
priority bandwith (BW);
Counter #14 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Gauge .1.3.6.1.4.1.637.3.1.8.5.5.5.1.19 |
adnAeiPortTrInCellsCounterThe counter associated with the number of incoming
cells;
counter #15 of the ATM core.;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.20 |
adnAeiPortTrOutCellsCounterThe counter associated with the number of outgoing
cells;
counter #16 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter .1.3.6.1.4.1.637.3.1.8.5.5.5.1.21 |
adnAtmBoardDefTableThis table is the ATM boards defects table.
Some defects characteristics are updatable.
Matrix board case: all the defects are only
readable. SEQUENCE OF AdnAtmBoardDefEntry .1.3.6.1.4.1.637.3.1.8.5.5.20 |
adnAtmBoardDefEntryAn entry in the ATM boards defects table. There
will be one entry for each defect (i.e
error/warning) configured. Notice that according to
the defect number, default value of each parameter
of the instance may be different between two
instances. AdnAtmBoardDefEntry .1.3.6.1.4.1.637.3.1.8.5.5.20.1 |
adnAtmBoardDefBoardTypeThis is the ATM board type.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.20.1.1 |
adnAtmBoardDefNumberThis indicates the defect number. The description
of each defect is given via the adnAtmBoardErASEStatus
for ASE board, the adnAtmBoardErHSCStatus for HSC board,
the adnAtmBoardErCIGStatus for CIG board. These
nominators are defined in the adnAtmBoardErTable.
There's a one to one mapping between the bit
position and the defect number.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.20.1.2 |
adnAtmBoardDefEventClassThis indicates the event class from hardware side:
event: single fault signalled by the hardware or
another software module to the supervision antenna
inside the coupler board. No end is signalled, the
presence of the fault can't be checked.
status: the beginning of the fault is signalled to
the supervision antenna inside the coupler board;
the presence of the fault can be checked.
statusc: the hardware provides no interrupt; this
status is periodically scanned by the supervision
antenna inside the coupler board.
counter: a n bit long hardware counter counts the
elementary events; an interrupt is generally sent at
saturation; its value can be read; it is reset to
zero when read.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.20.1.3 |
adnAtmBoardDefBegThresholdThis indicates the number of times an error is
detected within a time period (defined by
adnAtmBoardDefBegTimer) before an event (beginning
of error) is generated and an error condition is
entered.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.20.1.4 |
adnAtmBoardDefEndThresholdThis indicates the maximum number of times a
condition may be detected within a time period
(defined by adnAtmBoardDefEndTimer) before an event
(ending of error) is generated and an error
condition is cleared.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.20.1.5 |
adnAtmBoardDefBegTimerThis indicates the beginning timer in milliseconds
during which the first appearance of an error is
controlled.rw INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.8.5.5.20.1.6 |
adnAtmBoardDefEndTimerThis indicates the end timer in milliseconds
during which the disappearance of an error is
controlled.rw INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.8.5.5.20.1.7 |
adnAtmBoardDefSignallingThis indicates the defect signalling in addition to
the report towards the control unit (CU).
It is coded as a bit map.
The various bit positions are:
1 : ERI (error indicator, bit inserted in the
active maintenance cells to warn
neighbour boards that an error is
detected),
2 : P-FERF or RDI-P (path section far end
received failure indication sent to the
origin of the defect),
4 : MS-FERF or RDI-L (multiplexing section
far end received failure indication sent
to the origin of the defect),
8 : ATM-AIS (alarm indication signal is
sent on a line defect towards the network
handler dealing with VP/VC AIS management),
16 : RAI (remote alarm indication),
32 : RLED (the status led must be set
permanent red).rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.20.1.8 |
adnAtmBoardDefErrOrWngThis indicates the defect type (i.e error or
warning); an error is a critical defect which
modifies the operational state of the object.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.20.1.9 |
adnAtmBoardDefReportEnableThis indicates the report control of the defect
towards the control unit (CU).rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.20.1.10 |
adnAeiPortDefTableThis table is the ATM electrical interface (AEI)
port defects table.
Some defects characteristics are updatable.
Matrix board case: all the defects are only
readable. SEQUENCE OF AdnAeiPortDefEntry .1.3.6.1.4.1.637.3.1.8.5.5.21 |
adnAeiPortDefEntryAn entry in the ATM electrical interface (AEI)
port defects table. There will
be one entry for each defect (i.e error/warning)
configured. Notice that according to the defect
number, default value of each parameter of the
instance may be different between two instances. AdnAeiPortDefEntry .1.3.6.1.4.1.637.3.1.8.5.5.21.1 |
adnAeiPortDefBoardTypeThis is the ATM board type.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.21.1.1 |
adnAeiPortDefNumberThis indicates the defect number. The description
of each defect is given via the adnAtmPortErASEStatus
for ASE board, the adnAtmPortErHSCStatus for HSC board,
the adnAtmPortErCIGStatus for CIG board. These
nominators are defined in the adnAtmPortErTable.
There's a one to one mappingbetween the bit position
the defect number.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.21.1.2 |
adnAeiPortDefEventClassThis indicates the event class from hardware side:
event: single fault signalled by the hardware or
another software module to the supervision antenna
inside the coupler board. No end is signalled, the
presence of the fault can't be checked.
status: the beginning of the fault is signalled to
the supervision antenna inside the coupler board;
the presence of the fault can be checked.
statusc: the hardware provides no interrupt; this
status is periodically scanned by the supervision
antenna inside the coupler board.
counter: a n bit long hardware counter counts the
elementary events; an interrupt is generally sent at
saturation; its value can be read; it is reset to
zero when read.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.21.1.3 |
adnAeiPortDefDirectionThis indicates the direction of the defect when it
occurs.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.21.1.4 |
adnAeiPortDefBegThresholdThis indicates the number of times an error is
detected within a time period (defined by
adnAeiPortDefBegTimer) before an event (beginning of
error) is generated and an error condition is
entered.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.21.1.5 |
adnAeiPortDefEndThresholdThis indicates the maximum number of times a
condition may be detected within a time period
(defined by adnAeiPortDefEndTimer) before an event
(ending of error) is generated and an error
condition is cleared.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.21.1.6 |
adnAeiPortDefBegTimerThis indicates the beginning timer in milliseconds
during which the first appearance of an error is
controlled.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.21.1.7 |
adnAeiPortDefEndTimerThis indicates the end timer in milliseconds
during which the disappearance of an error is
controlled.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.21.1.8 |
adnAeiPortDefSignallingThis indicates the defect signalling in addition to
the report towards the control unit (CU).
It is coded as a bit map.
The various bit positions are:
1 : ERI (error indicator, bit inserted in the
active maintenance cells to warn
neighbour boards that an error is
detected),
2 : P-FERF or RDI-P (path section far end
received failure indication sent to the
origin of the defect),
4 : MS-FERF or RDI-L (multiplexing section
far end received failure indication sent
to the origin of the defect),
8 : ATM-AIS (alarm indication signal is
sent on a line defect towards the network
handler dealing with VP/VC AIS management),
16 : RAI (remote alarm indication),
32 : RLED (the status led must be set
permanent red).rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.21.1.9 |
adnAeiPortDefErrOrWngThis indicates the defect type (i.e error or
warning); an error is a critical defect which
modifies the operational state of the object.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.21.1.10 |
adnAeiPortDefReportEnableThis indicates the report control of the defect
towards the control unit (CU).rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.21.1.11 |
adnAtmLineDefTableThis table is the ATM line defects table. SEQUENCE OF AdnAtmLineDefEntry .1.3.6.1.4.1.637.3.1.8.5.5.22 |
adnAtmLineDefEntryAn entry in the ATM line errors/warnings and
defects table. There will be one entry for each
defect (error/warning) configured. Notice that
according to the defect number, default value of
each parameter of the instance may be different
between two instances. AdnAtmLineDefEntry .1.3.6.1.4.1.637.3.1.8.5.5.22.1 |
adnAtmLineDefLineTypeThis is the line type.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.22.1.1 |
adnAtmLineDefNumberThis indicates the defect number.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.22.1.2 |
adnAtmLineDefEventClassThis indicates the event class from hardware side:
event: single fault signalled by the hardware or
another software module to the supervision antenna
inside the coupler board. No end is signalled, the
presence of the fault can't be checked.
status: the beginning of the fault is signalled to
the supervision antenna inside the coupler board;
the presence of the fault can be checked.
statusc: the hardware provides no interrupt; this
status is periodically scanned by the supervision
antenna inside the coupler board.
counter: a n bit long hardware counter counts the
elementary events; an interrupt is generally sent at
saturation; its value can be read; it is reset to
zero when read.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.22.1.3 |
adnAtmLineDefUseInPerfCalculThis indicates if the defect is used or not in
performance calculation. If the defect is used for
the performance calculation (i.e DefUseInPerfCalcul
= yes), then the type of this defect (DefPerfType)
from performance side can be either:
defect: then, each occurence of the defect
contributes to the performance calculation,
counter: then, a counter is used to take into
account this defect in performance calculation
when the threshold defined by DefPerfThr is
reached.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.22.1.4 |
adnAtmLineDefPerfTypeThis indicates the performance type :
counter: a counter is used to take into
account this defect in performance calculation
when the threshold defined by DefPerfThr is
reached,
defect: each occurence of the defect
contributes to the performance calculation,
defectc: each occurence of the defect
contributes to the performance calculation,
with counting of seconds (ANSI only).ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.22.1.5 |
adnAtmLineDefPerfThresholdThis indicates the threshold value of the
performance counter.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.22.1.6 |
adnAtmLineDefDirectionThis indicates the direction of the defect when it
occurs:
transmit: defect on transmission direction,
receive: defect on reception direction, without
inhibition of transmission counters,
receiveInhib: defect on reception direction,
with inhibition of transmission counters.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.22.1.7 |
adnAtmLineDefBegThresholdThis indicates the number of times an error is
detected within a time period (defined by
adnAtmLineDefBegTimer) before an event (beginning of
error) is generated and an error condition is
entered.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.22.1.8 |
adnAtmLineDefEndThresholdThis indicates the maximum number of times a
condition may be detected within a time period
(defined by adnAtmLineDefEndTimer) before an event
(ending of error) is generated and an error
condition is cleared.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.22.1.9 |
adnAtmLineDefBegTimerThis indicates the beginning timer in milliseconds
during which the first appearance of an error is
controlled.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.22.1.10 |
adnAtmLineDefEndTimerThis indicates the end timer in milliseconds
during which the disappearance of an error is
controlled.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.22.1.11 |
adnAtmLineDefSignallingThis indicates the failure signalling in addition to
the report towards the control unit (CU).
It is coded as a bit map.
The various bit positions are:
1 : ERI (error indicator, bit inserted in the
active maintenance cells to warn
neighbour boards that an error is
detected),
2 : P-FERF or RDI-P (path section far end
received failure indication sent to the
origin of the defect),
4 : MS-FERF or RDI-L (multiplexing section
far end received failure indication sent
to the origin of the defect),
8 : ATM-AIS (alarm indication signal is
sent on a line defect towards the network
handler dealing with VP/VC AIS management),
16 : RAI (remote alarm indication),
32 : RLED (the status led must be set
permanent red).rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.22.1.12 |
adnAtmLineDefErrOrWngThis indicates the defect type (i.e error or
warning); an error is a critical defect which
modifies the operational state of the object.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.22.1.13 |
adnAtmLineDefReportEnableThis indicates the report control of the defect
towards the control unit (CU).rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.22.1.14 |
adnAtmLineDefHierarchyThis indicates the current Defect hierarchy towards
the other defects; it is coded as a long integer
(i.e 32 bits).
There's one bit per defect:
- bit #n = 0 : defect n masked (i.e the current
defect inhibits the #n one if both are present),
- bit #n = 1 : defect n unmasked.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.5.22.1.15 |
adnAtmLineDefPerfLevelThis indicates the level at which the defect
is managed:
line: the defect is managed at line level,
path: the defect is managed at path level.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.22.1.16 |
adnAtmLineDefFailureSigThis indicates the failure signalling in addition to
the report towards the control unit (CU).
It is coded as a bit map.
The various bit positions are:
1 : ERI or RSA (error indicator, bit inserted
in theactive maintenance cells to warn
neighbour boards that an error is
detected),
2 : P-FERF or RDI-P or RAI (path section far
end received failure indication sent to
the origin of the defect),
4 : MS-FERF or RDI-L (multiplexing section
far end received failure indication sent
to the origin of the defect),
8 : ATM-AIS (alarm indication signal is
sent on a line defect towards the network
handler dealing with VP/VC AIS management),
32 : RLED (the status led must be set
permanent red).rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.22.1.17 |
adnAtmLineDefDefectSigThis indicates the defect signalling in addition to
the report towards the control unit (CU).
It is coded as a bit map.
The various bit positions are:
1 : ERI or RSA (error indicator, bit inserted
in theactive maintenance cells to warn
neighbour boards that an error is
detected),
2 : P-FERF or RDI-P or RAI (path section far
end received failure indication sent to
the origin of the defect),
4 : MS-FERF or RDI-L (multiplexing section
far end received failure indication sent
to the origin of the defect),
8 : ATM-AIS (ATM alarm indication signal is
sent on a line defect towards the network
handler dealing with VP/VC AIS management),
32 : RLED (the status led must be set
permanent red),
64 : NB-AIS (not ATM alarm indication signal
is sent on a line defect towards the AEI
side),
128 : TCK (trunk conditioning: in circuit
emulation, a specified pattern is sent
in timeslots, except TS0: a pattern for
TS16, another one for other TS).rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.22.1.18 |
adnAtmLinePerfTableThis table is the ATM line performance parameters
table. SEQUENCE OF AdnAtmLinePerfEntry .1.3.6.1.4.1.637.3.1.8.5.5.23 |
adnAtmLinePerfEntryAn entry in the ATM line performance parameters
table. There will be one entry for each line type. AdnAtmLinePerfEntry .1.3.6.1.4.1.637.3.1.8.5.5.23.1 |
adnAtmLinePerfLineTypeThis is the line type.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.23.1.1 |
adnAtmLinePerfBlocksPerSecThis indicates the number of blocks sent and
received per second.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.2 |
adnAtmLinePerfLowErrBlockThrThis indicates the low second error block
threshold; the value range of this threshold is
1..adnAtmLinePerfHighErrBlockThr.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.3 |
adnAtmLinePerfHighErrBlockThrThis indicates the high second error block
threshold; the value range of this threshold is
1..adnAtmLinePerfBlocksPerSec.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.4 |
adnAtmLinePerfBegUnAvailableThis indicates the number of consecutive severely
erroned seconds necessary to declare the beginning
of an unavailable period.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.5 |
adnAtmLinePerfEndUnAvailableThis indicates the number of consecutive non
severely erroned seconds necessary to declare the
ending of the unavailable period.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.6 |
adnAtmLinePerfConsSeverErrSecThis indicates the number of consecutive severely
errored seconds used for the F3 maintenance flow
calculation.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.7 |
adnAtmLinePerfHighBBE15ThrThis indicates the high threshold for background
block error on 1/4 hour period;
the value range of this threshold is
0..900*adnAtmLinePerfHighErrBlockThr.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.8 |
adnAtmLinePerfHighES15ThrThis indicates the high threshold for errored
second on 1/4 hour period;
the value range of this threshold is 0..900.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.9 |
adnAtmLinePerfHighSES15ThrThis indicates the high threshold for severely
errored second on 1/4 hour period;
the value range of this threshold is 0..900.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.10 |
adnAtmLinePerfLowBBE15ThrThis indicates the low threshold for background
block error on 1/4 hour period;
the value range of this threshold is
0..adnAtmLinePerfHighBBE15Thr.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.11 |
adnAtmLinePerfLowES15ThrThis indicates the low threshold for errored
second on 1/4 hour period;
the value range of this threshold is
0..adnAtmLinePerfHighES15Thr.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.12 |
adnAtmLinePerfLowSES15ThrThis indicates the low threshold for severely
errored second on 1/4 hour period;
the value range of this threshold is
0..adnAtmLinePerfHighSES15Thr.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.13 |
adnAtmLinePerfBBE24ThrThis indicates the threshold for background block
error on 24 hours period;
the value range of this threshold is
0..86400*adnAtmLinePerfHighErrBlockThr.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.14 |
adnAtmLinePerfES24ThrThis indicates the threshold for errored second on
24 hours period;
the value range of this threshold is 0..86400.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.15 |
adnAtmLinePerfSES24ThrThis indicates the threshold for severely errored
second on 24 hours period;
the value range of this threshold is 0..86400.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.23.1.16 |
adnHscBoardTrMgtEnvTableThis table is the HSC Board Traffic Management
parameters table.
This is only relevant for HSC boards with
output buffers SEQUENCE OF AdnHscBoardTrMgtEnvEntry .1.3.6.1.4.1.637.3.1.8.5.5.24 |
adnHscBoardTrMgtEnvEntryAn entry in the ATM Traffic Management parameters
table. AdnHscBoardTrMgtEnvEntry .1.3.6.1.4.1.637.3.1.8.5.5.24.1 |
adnHscBoardTrMgtEnvOBLineAssigThis indicates the line number the output
buffer is assigned to.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.24.1.1 |
adnHscBoardTrMgtEnvMOBEFCIOffThThis indicates the Explicit Forward Congestion
Indication (EFCI) activation threshold in medium
priority output buffer (OB);
EFCI is generated towards the receiver termination
point, in order to prevent congestion situation to
be encountered within the output buffer;
EFCI tagging is activated as soon as the activation
threshold is reached; EFCI tagging is stopped as
soon as the filling of the OB is below the EFCI
desactivation threshold;
the value range of the threshold is
0..adnHscBoardTrMgtMOBSize;
this is not relevant for E1B and T1B boards.rw INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.8.5.5.24.1.2 |
adnHscBoardTrMgtEnvLOBEFCIOffThThis indicates the Explicit Forward Congestion
Indication (EFCI) desactivation threshold in low
priority output buffer (OB);
EFCI is generated towards the receiver termination
point, in order to prevent congestion situation to
be encountered within the output buffer;
EFCI tagging is activated as soon as the activation
threshold is reached; EFCI tagging is stopped as
soon as the filling of the OB is below the EFCI
desactivation threshold;
the value range of the threshold is
0..adnHscBoardTrMgtLOBSize;
this is not relevant for E1B and T1B boards.rw INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.8.5.5.24.1.3 |
adnAseBoardTrMgtEnvTableThis table is the BBASE Board Traffic Management
environment table;
the index is the AEI port number of the BBASE;
this is relevant only for the matrix board with
adnEquipSubType equal to adnBbaseb. SEQUENCE OF AdnAseBoardTrMgtEnvEntry .1.3.6.1.4.1.637.3.1.8.5.5.25 |
adnAseBoardTrMgtEnvEntryAn entry in the BBASE Board Traffic Management
environment table. AdnAseBoardTrMgtEnvEntry .1.3.6.1.4.1.637.3.1.8.5.5.25.1 |
adnAseBoardTrMgtEnvAeiPortThis is BBASE AEI port number.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.5.25.1.1 |
adnAseBoardTrMgtEnvAeiSpeedThis indicates the speed of the AEI port ;
the allowed values are :
- speed622 : 622.08 Mb/s
- speed603 : 603.23 Mb/s
- speed593 : 593.80 Mb/s
- speed565 : 565.53 Mb/s
- speed155 : 155.52 Mb/s
- speed150 : 150.81 Mb/s
- speed148 : 148.45 Mb/s
- speed142 : 142.00 Mb/s
- speedLine : speed of the outgoing
physical line ;
this is relevant only for the matrix board with
adnEquipSubType equal to adnBbaseb.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.5.25.1.2 |
adnCongMgmtPrivateMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.6 |
adnCongMgmtLTTableThe Frame Relay LT Information table for Congestion
Management. SEQUENCE OF AdnCongMgmtLTEntry .1.3.6.1.4.1.637.3.1.8.5.6.1 |
adnCongMgmtLTEntryAn entry in the Frame Relay LT Information table
. The line and channel portion of ifIndex is not
significant. AdnCongMgmtLTEntry .1.3.6.1.4.1.637.3.1.8.5.6.1.1 |
adnCongMgmtLTTraceFlagflag indicating if trace per LT is enabledrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.8.5.6.1.1.1 |
adnCongMgmtFreeBd2CongLevelTableThis is the BINARY table that determines the congestion level
based upon the percentage of free Cryspix Buffer descriptors.
It is placed here so that the level could be changed to
achieve fine tuning. It is placed here for debugging
and maintenance purpose onlyrw OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.6.1.1.2 |
adnCongMgmtProcUtilizationThis is the processor utilization value of this LT as calculated by the
congestion management. it is placed here for maintenance purpose
onlyro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.6.1.1.3 |
adnCongMgmtChanEnvTableThe Frame Relay channel Information table for Congestion
Management. SEQUENCE OF AdnCongMgmtChanEnvEntry .1.3.6.1.4.1.637.3.1.8.5.6.2 |
adnCongMgmtChanEnvEntryAn entry in the Frame Relay Channel Information
table. AdnCongMgmtChanEnvEntry .1.3.6.1.4.1.637.3.1.8.5.6.2.1 |
adnCongMgmtChannelThis is the BINARY internal structure per channel maintained by
congestion management. It contains the contents of the channel
control block. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.6.2.1.1 |
adnCongMgmtChanDiscMsgtraceThis is the BINARY discard message trace table per channel maintained
by congestion management. It contents the discard message
received by this channel from other cards. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.6.2.1.2 |
adnCongMgmtChanAppliMsgTraceThis is the BINARY message trace table per channel maintained
by congestion management. It contents the trace of all the messages
received by this channel from the application. It is placed here for maintenance
purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.6.2.1.3 |
adnCongMgmtChanTraceFlagflag indicating if trace per channel is enabledrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.8.5.6.2.1.4 |
adnCongMgmtChanUtilizationCurrent channel utilization value in the egress directionro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.6.2.1.5 |
adnCongMgmtChanEgressMaxCUFThis is the maximum of the egress channel utilization and the
processor utilization. This field may be set to zero via SNMP
command, so that the user may be able to measure or read the
maximum CUF over a period of time.rw INTEGER (-2147483648..2147483647) -- UNITS Percent .1.3.6.1.4.1.637.3.1.8.5.6.2.1.6 |
adnCongMgmtChanMinTPSFThis is the minimum time in microseconds needed to process
a subframe. This value is used when calculating processor
utilization.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.6.2.1.7 |
adnCongMgmtVCEnvTableThis is the VC table for Frame Relay Congestion Management. SEQUENCE OF AdnCongMgmtVCEnvEntry .1.3.6.1.4.1.637.3.1.8.5.6.3 |
adnCongMgmtVCEnvEntryVC table entry AdnCongMgmtVCEnvEntry .1.3.6.1.4.1.637.3.1.8.5.6.3.1 |
adnCongMgmtVCcbThis is the BINARY internal PVC structure maintained by FRANP_SW.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.6.3.1.1 |
adnCongMgmtVCLineDataTraceThis is an internal BINARY message trace table maintained by
congestion management for this VC. This trace will contain
relevant info for each subframe comming from the
Line and going to the bus.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.6.3.1.2 |
adnCongMgmtVCBusDataTraceThis is an internal BINARY message trace table maintained by
congestion management for this VC. This trace will contain
relevant info for each subframe comming from the Bus and
going to the Line.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.6.3.1.3 |
adnCongMgmtVCTraceEnablevalue indicating if trace per VC is enabledrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.8.5.6.3.1.4 |
adnCongMgmtVCStateMachineTraceThis is an internal BINARY message trace table maintained by
congestion management for this VC. This trace will contain
the state and events of the SIR update state machine
and ISM congestion state machine.
It is placed here for maintenance purposes only.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.6.3.1.5 |
adnCongMgmtLTTraceTableThe Frame Relay LT Trace table for Congestion
Management. SEQUENCE OF AdnCongMgmtLTTraceEntry .1.3.6.1.4.1.637.3.1.8.5.6.4 |
adnCongMgmtLTTraceEntryAn entry in the Franp cm trace table AdnCongMgmtLTTraceEntry .1.3.6.1.4.1.637.3.1.8.5.6.4.1 |
adnCongMgmtLTCQtraceThis is the trace area for the calendar queue related
variables. It is placed here for maintenance purpose
onlyro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.6.4.1.1 |
adnCongMgmtTraceIndexIndex indicating the current index of Calendar Queue
trace. This is used to display more than 255 bytes of
trace by means of repeated getnext message from the INMPrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.6.4.1.2 |
adnLapPrivateMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.7 |
adnLapPrivateTableThis is the LAP private table. It will exist once per LAP instance
on each LT. SEQUENCE OF AdnLapPrivateEntry .1.3.6.1.4.1.637.3.1.8.5.7.1 |
adnLapPrivateEntryOne instance of the adnLapPrivateTable. There will be one instance
for each LAP on each LT. AdnLapPrivateEntry .1.3.6.1.4.1.637.3.1.8.5.7.1.1 |
adnLapPrivateTraceL1flagThis identifies the enable state of the
tracing option at the Level 1 interface.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.7.1.1.1 |
adnLapPrivateTraceL1bufferThis is internal Level 1 message trace BINARY bufferro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.7.1.1.2 |
adnLapPrivateTraceL3flagThis identifies the enable state of the
tracing option at the Level 3 interface.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.7.1.1.3 |
adnLapPrivateTraceL3bufferThis is internal Level 3 message trace BINARY bufferro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.7.1.1.4 |
adnLapPrivateTraceNMGSflagThis identifies the enable state of the
tracing option at the NMGS interface.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.7.1.1.5 |
adnLapPrivateTraceNMGSbufferThis is internal NMGSmessage trace BINARY bufferro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.7.1.1.6 |
adnLapFlowRASInfoflagThis identifies the enable state of the
tracing option for RASinfo.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.7.1.1.7 |
adnLapFlowRASInfoThe statistics, trace information and current states
debug dump fields to be used for remote debugging
information.
RAS = reliability, accessibility, serviceabilityro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.7.1.1.8 |
adnSsupEnvMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.8 |
adnSsupCUDbgPCBTableSSUPCU maintained SM processor control blocks.
There is one such block for every secondary
module (SM) processor that has been created
(configured). The SSUPCU will keep current
status information about the remote processor
(among many other things) in such a block. SEQUENCE OF AdnSsupCUDbgPCBEntry .1.3.6.1.4.1.637.3.1.8.5.8.1 |
adnSsupCUDbgPCBEntryThis is a description of a single entry in the
SSUPCU Processor control block table. For
debugging reason, a hex-dump is considered
sufficient for now. Structures defined in
C-header files will be used to determine the
values of the appropriate fields.
The table exists only on the CU, and therefore
uses the CENTRALIZED indexing for SFAS/MSUP
routing purposes. The additional index will be
encoded to 'adnProcessor' type definition allow
SSUPCU code to determine which instance is
desired by the user. AdnSsupCUDbgPCBEntry .1.3.6.1.4.1.637.3.1.8.5.8.1.1 |
adnSsupCUDbgPCBDataThis is the hex-dump that represents the SSUPCU
processor control block entry. Each such entry
contains information about a SM processor on a
coupler card that is configured.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.8.1.1.4 |
adnSsupOMDbgPCBTableSSUPOM maintained SM processor control blocks.
There is one such block per OM processor. Only
a single instance is maintained in each OM's
memory, that pertaining to itself. This block
contains information needed for the functioning
of the processor, as well as information
relating to the LT processors on the card. SEQUENCE OF AdnSsupOMDbgPCBEntry .1.3.6.1.4.1.637.3.1.8.5.8.2 |
adnSsupOMDbgPCBEntryThis is a description of a single entry in the
SSUPOM Processor control block table. For
debugging reason, a hex-dump is considered
sufficient for now. Structures defined in
C-header files will be used to determine the
values of the appropriate fields.
The 'adnCouplerIndex' is used for SFAS/MSUP
routing purposes. This unfortunately only
contains information of the chassis, slot and
_line_ number (not processor). The user has to
be aware of what line would map to the OM
processor.
Currently the line should be encoded as 512.
Note that this information is likely to change. AdnSsupOMDbgPCBEntry .1.3.6.1.4.1.637.3.1.8.5.8.2.1 |
adnCouplerIndexThe defintion of the 'adnCouplerIndex' object.
It is used for routing the SNMP command to the
appropriate processor by SFAS/MSUP sub-systems.ro AdnCouplerIndex .1.3.6.1.4.1.637.3.1.8.5.8.2.1.1 |
adnSsupOMDbgPCBDataThis is the hex-dump that represents the SSUPOM
processor control block entry. Each such entry
contains information about the OM processor in
which memory the block resides.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.8.2.1.2 |
adnSsupLTDbgPCBTableSSUPLT maintained SM processor control blocks.
There is one such block per LT processor. Only
one block exists in each LT processor's memory,
and it contains information needed by that
processor only. SEQUENCE OF AdnSsupLTDbgPCBEntry .1.3.6.1.4.1.637.3.1.8.5.8.3 |
adnSsupLTDbgPCBEntryThis is a description of a single entry in the
SSUPLT Processor control block table. For
debugging reason, a hex-dump is considered
sufficient for now. Structures defined in
C-header files will be used to determine the
values of the appropriate fields.
The 'adnCouplerIndex' is used for SFAS/MSUP
routing purposes. This unfortunately only
contains information of the chassis, slot and
_line_ number (not processor). The user has to
be aware of what line would map to the LT
processor.
Currently the line should be encoded as 255 for
the LLT, and 383 for the ULT processor. Note
that this information is likely to change. AdnSsupLTDbgPCBEntry .1.3.6.1.4.1.637.3.1.8.5.8.3.1 |
adnSsupLTDbgPCBDataThis is the hex-dump that represents the SSUPLT
processor control block entry. Each such entry
contains information about the LT processor in
which memory the block resides.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.8.3.1.1 |
adnAAFDEnvMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.10 |
adnAAFDMaintTableThis table contains internal AAFD SWBB data
structure, one entry per AAFD SWBB instance. SEQUENCE OF AdnAAFDMaintEntry .1.3.6.1.4.1.637.3.1.8.5.10.1 |
adnAAFDMaintEntryAn entry in the adnAAFDMaintTable. There will be
one entry for each AAFD SWBB instance. AdnAAFDMaintEntry .1.3.6.1.4.1.637.3.1.8.5.10.1.1 |
adnAAFDContxt1This is the first part of internal AAFD data
structure containing internal error counters and
structures.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.10.1.1.1 |
adnAAFDContxt2This is the second part internal AAFD data
structure containing internal error counters and
structures.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.10.1.1.2 |
adnAAFDContxt3This is the third part internal AAFD data
structure containing internal error counters and
structures.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.10.1.1.3 |
adnAAFDContxt4This is the fourth part of internal AAFD data
structure containing internal error counters and
structures.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.10.1.1.4 |
adnAAFDContxt5This is the fifth part internal AAFD data
structure containing internal error counters and
structures.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.10.1.1.5 |
adnAAFDContxt6This is the sixth part internal AAFD data
structure containing internal error counters and
structures.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.10.1.1.6 |
adnAAFDContxt7This is the seventh part internal AAFD data
structure containing internal error counters and
structures.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.10.1.1.7 |
adnAAFDVCCMaintTableThis table contains internal AAFD SWBB data
structure, one entry per Frame Relay logical line. SEQUENCE OF AdnAAFDVCCMaintEntry .1.3.6.1.4.1.637.3.1.8.5.10.2 |
adnAAFDVCCMaintEntryAn entry in the adnAAFDVCCMaintTable. There will
be one entry for each Frame Relay logical line. AdnAAFDVCCMaintEntry .1.3.6.1.4.1.637.3.1.8.5.10.2.1 |
adnAAFDVCCContext1This is the first part of internal data structure containing
internal errors counters and structures concerning
this Frame Relay logical line.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.10.2.1.1 |
adnAAFDVCCContext2This is the second part of internal data structure containing
internal errors counters and structures concerning
this Frame Relay logical line.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.10.2.1.2 |
adnAAFDVCCContext3This is the third part of internal data structure containing
internal errors counters and structures concerning
this Frame Relay logical line.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.10.2.1.3 |
adnPssMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.11 |
adnPssBWTableEntry AdnPssBWEntry SEQUENCE OF AdnPssBandWEntry .1.3.6.1.4.1.637.3.1.8.5.11.1 |
adnPssBWEntryEach entry (row) in the adnPSSBWTable. There will be one
entry per ifindex AdnPssBandWEntry .1.3.6.1.4.1.637.3.1.8.5.11.1.1 |
adnPssAvailBWThis is the internal binary available bandwidth information
received by Path Select for a particular ifindex.ro OCTET STRING -- UNITS Available Band Width .1.3.6.1.4.1.637.3.1.8.5.11.1.1.1 |
adnpssifindexThis is adn pss ifindex.ro INTEGER (-2147483648..2147483647) -- UNITS If Index .1.3.6.1.4.1.637.3.1.8.5.11.1.1.2 |
adnPssTracehdrTableThis table contains various trace areas used by Path Select
for maintenance/diagnostic purpose only. SEQUENCE OF AdnPssTraceValEntry .1.3.6.1.4.1.637.3.1.8.5.11.2 |
adnPssTracehdrEntryEach entry (row) in the adnPssTraceTable. AdnPssTraceHdrEntry .1.3.6.1.4.1.637.3.1.8.5.11.2.1 |
adnPssPrintFlagThis value is used to set Pss_print_flag to determine
which printf's are allowed.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.11.2.1.1 |
adnPssFromFrtBufThis is a binary valuero OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.11.2.1.2 |
adnPssToFrtBufThe binary buffer valuero OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.11.2.1.3 |
adnPssTraceTableThis table contains various trace areas used by Path Select
for maintenance/diagnostic purpose only. SEQUENCE OF AdnPssTraceValEntry .1.3.6.1.4.1.637.3.1.8.5.11.3 |
adnPssTraceEntryEach entry (row) in the adnPssTraceTable. AdnPssTraceValEntry .1.3.6.1.4.1.637.3.1.8.5.11.3.1 |
adnPssTraceIndexTrace Index Number INTEGER -- UNITS Trace index number .1.3.6.1.4.1.637.3.1.8.5.11.3.1.1 |
adnPssTraceValueThis is the binary. All messages received
from the Franp_si component are stored herero OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.11.3.1.2 |
adnRtsagtMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.12 |
adnRtsagtPrintFlagTableThis table is to turn on and off the print capability Routes
Agent for maintenance/diagnostic purpose only. SEQUENCE OF AdnRtsagtPrintFlagHdrEntry .1.3.6.1.4.1.637.3.1.8.5.12.1 |
adnRtsagtPrintFlagHdrEntryEach entry (row) in the adnRtsagtPrintFlagTable. AdnRtsagtPrintFlagHdrEntry .1.3.6.1.4.1.637.3.1.8.5.12.1.1 |
adnRtsagtPrintFlagThis value is used to set Rtsagt_print_flag to determine
which printf's are allowed.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.1.1.1 |
adnRtsagtTraceTableThis table contains various trace areas used by Routes Agent
for maintenance/diagnostic purpose only. SEQUENCE OF AdnRtsagtTraceEntry .1.3.6.1.4.1.637.3.1.8.5.12.2 |
adnRtsagtTraceEntryEach entry (row) in the adnRtsagtTraceTable. AdnRtsagtTraceEntry .1.3.6.1.4.1.637.3.1.8.5.12.2.1 |
adnRtsagtTraceIndexTrace Index Number INTEGER .1.3.6.1.4.1.637.3.1.8.5.12.2.1.1 |
adnRtsagtTraceValueThis is the binary.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.2.1.2 |
adnRtsagtLinkCtrlBlkTableThis table contains Link Control Block values SEQUENCE OF AdnRtsagtLinkCtrlEntry .1.3.6.1.4.1.637.3.1.8.5.12.3 |
adnRtsagtLinkCtrlBlkEntryEntry in the adnRtsagtLinkCtrlBlkTable. AdnRtsagtLinkCtrlEntry .1.3.6.1.4.1.637.3.1.8.5.12.3.1 |
adnRtsagtIfIndexRoutes agent link control block ifindex.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.3.1.1 |
adnRtsagtLpxRoutes agent lpx selfro INTEGER (-2147483648..2147483647) -- UNITS Routes agent lpx self .1.3.6.1.4.1.637.3.1.8.5.12.3.1.2 |
adnRtsagtUserNetFlagRoutes Agent 0:user, 1 : network.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.3.1.3 |
adnRtsagtHssTpxRoutes agent hss : 1, tpx : 0, other : 2.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.3.1.4 |
adnRtsagtSigIfStateRoutes agent Signal channel status received, sent, signal
enabled, sig disabled, sig blocked, no. of sig states.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.3.1.5 |
adnRtsagtL2IfStateRoutes agent states for L2 Interface Idle or link released,
Waiting for establish, Link Established, Awaiting release conf,
L2 flow controlled us, Number of L2 states.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.3.1.6 |
adnRtsagtMhIfStateRoutes agent MH States, Add request sent to MH, MH link status
down, Sent link up request, Link with MH is up, MH has sent
XOFF, Local XOFF sent to MH, Number of MH states.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.3.1.7 |
adnRtsagtL3IfStateRoutes agent state of l3 interface, L3 not yet established,
Sent Establish Req, We sent Xoff to Remote, Remote sent Xoff
to us, We sent block to Remote, Remote sent block to us,
Link up in data xfer, Number of L3 states.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.3.1.8 |
adnRtsagtLhMainStateRoutes agent state of Link Handler, Processing Add Request,
Waiting for enable, Waiting for MDL confirm, Waiting TPX
setup, Waiting TPX release, Waiting L2 establish, Waiting
L3 establish, Wait for link up from MH, Wait for releases
Link operational, L3 up, MH down on purpose, IACS is down,
Number of LH states.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.3.1.9 |
adnRtsagtSiCcbRoutes agent Pointer to control Block of signal.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.3.1.10 |
adnRtsagtLtLpxRoutes agent lpx of lt.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.3.1.11 |
adnRtsagtMemLpxRoutes agent lpx for lt data transfer memoryro INTEGER (-2147483648..2147483647) -- UNITS lpx for lt data xfer memory .1.3.6.1.4.1.637.3.1.8.5.12.3.1.12 |
adnRtsagtAtmSiIfapRoutes agent Signalling IFAPro INTEGER (-2147483648..2147483647) -- UNITS Signalling IFAP .1.3.6.1.4.1.637.3.1.8.5.12.3.1.13 |
adnRtsagtAtmSiSuidRoutes agent SUIDro INTEGER (-2147483648..2147483647) -- UNITS Signalling SUID .1.3.6.1.4.1.637.3.1.8.5.12.3.1.14 |
adnRtsagtL3MaxPktSizeRoutes agent negotiated pkt size with peerro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.3.1.15 |
adnRtsagtPeerVersionRoutes agent link handler version of peerro INTEGER .1.3.6.1.4.1.637.3.1.8.5.12.3.1.16 |
adnRtsagtHeartBeatTimeRoutes agent time period of sending heartbeatro INTEGER .1.3.6.1.4.1.637.3.1.8.5.12.3.1.17 |
adnRtsagtLinkDeadTimeRoutes agent if no heartbeat for this timero INTEGER .1.3.6.1.4.1.637.3.1.8.5.12.3.1.18 |
adnRtsagtSigIfInfoRoutes agent information relevant to sig_ifro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.3.1.19 |
adnRtsagtL2IfInfoRoutes agent information relevant to l2_ifro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.3.1.20 |
adnRtsagtL3IfInfoRoutes agent information relevant to l3_ifro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.3.1.21 |
adnRtsagtMhIfInfoRoutes agent information relevant to mh_ifro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.3.1.22 |
adnRtsagtLhMainInfoRoutes agent information relevant to lh_mainro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.3.1.23 |
adnRtsagtLhTimerInfoRoutes agent timer inforo OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.3.1.24 |
adnRtsagtNextLcbRoutes agent next LCB in the listro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.3.1.25 |
adnRtsagtPrevLcbRoutes agent next LCB in the listro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.3.1.26 |
adnRtsagtTimerDurationsRoutes agent durations for various timersro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.3.1.27 |
adnRtsagtLayer2IdCcbRoutes agent set by layer2_id of Add channelro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.3.1.28 |
adnRtsagtLayer2RefCcbRoutes agent set by l2_ctx.l2_ref of mdl_assign_confro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.3.1.29 |
adnRtsagtChannelTypeRoutes agent IfIndex typero Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.3.1.30 |
adnRtsagtLineMetricRoutes agent trace containing the delay and
monetary cost metrics per line. The first and
third octet strings are fields which contain a
number representing the type of cost (delay(3)
and monetary(4)). The second and fourth octet
strings contain the actual cost value for the
cost type defined in the field before it.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.3.1.31 |
adnRtsagtLinkDeadFlagRoutes agent flag representing the status of the
link dead timer on each line. A one indicates
the timer is on and a zero indicates the timer
is off. The link dead timer is a timer that
starts when a line is set up and expires when
there are no messages sent across the line for
a period of time. If the timer expires the link
is deemed dead and is reset. However, the timer
is refreshed every time a message is sent across
the link.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.3.1.32 |
adnRtsagtLocalAddrTableEntry in the adnRtsagtLocalAddrTable SEQUENCE OF AdnRtsagtLocalAddrEntry .1.3.6.1.4.1.637.3.1.8.5.12.4 |
adnRtsagtLocalAddrEntryEntry in the adnRtsagtLocalAddrTable AdnRtsagtLocalAddrEntry .1.3.6.1.4.1.637.3.1.8.5.12.4.1 |
adnRtsagtLocalAddrIndexRoutes agent Address Index. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.4.1.1 |
adnRtsagtLocalAddrBlkHdrRoutes Agent address entry blockro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.4.1.2 |
adnRtsagtLocalAddrBlkCardRoutes Agent address entry blockro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.12.4.1.3 |
adnRtsagtTimerHdrTableEntry in the adnRtsagtTimerHdrTable SEQUENCE OF AdnRtsagtTimerHdrEntry .1.3.6.1.4.1.637.3.1.8.5.12.5 |
adnRtsagtTimerHdrEntryEntry in the adnRtsagtTimerHdrTable AdnRtsagtTimerHdrEntry .1.3.6.1.4.1.637.3.1.8.5.12.5.1 |
adnRtsagtTimerIndexRoutes agent Timer Index.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.5.1.1 |
adnRtsagtTimerDurationRoutes Agent Timer durationro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.5.1.2 |
adnRtsagtTimerPurposeRoutes Agent Timer Purposero Enumeration .1.3.6.1.4.1.637.3.1.8.5.12.5.1.3 |
adnRtsagtTimerToBeDeletedRoutes Agent Timer tobedeletedro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.5.1.4 |
adnRtsagtTimerNextRoutes Agent Next timer pointerro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.5.1.5 |
adnRtsagtTimerPreviousRoutes Agent Next timer pointerro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.12.5.1.6 |
adnMsupToolBoxEnvMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.13 |
adnMsupToolBoxSetupThis object provides a mechanism for controling the
whole MSUP tool box setup.
- default : the MSUP tool box configuration parameters
are set to the default values.
- temporary : the MSUP tool box configuration parameters
have been personalized, but a CU restart
will restore the default values.
- permanent : the MSUP tool box configuration parameters
have been personalized and saved in order
to retrieve the personalization after
CU cold or mild restarts.
A set to permanent saves the setup for next restarts.
A set to temporary keeps the current setup but deletes
the previous save.
A set to default restaures the default setup.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.13.1 |
adnMsupCtxTableA set of adnMsupCtxEntry entries. SEQUENCE OF AdnMsupCtxEntry .1.3.6.1.4.1.637.3.1.8.5.13.2 |
adnMsupCtxEntryThis object provides a mechanism to dump on
the CU craft interface contexts in MSUP memory. AdnMsupCtxEntry .1.3.6.1.4.1.637.3.1.8.5.13.2.1 |
adnMsupCtxTypeThe types of contexts in MSUP that can be dumped :
- chassisCtx(1) : context of a chassis
- boardCtx(2) : context of a board
- processorCtx(3) : context of a processor
- aeiPortCtx(4) : context of an AEI port
- atmCtx(5) : ATM init context
- generalCtx(6) : general MSUP data context
- nodeConfigCtx(7) : node system configuration context
- nodeSystCtx(8) : node system contextual context
- sessionCtx(9) : IACS session context
- cuCtx(10) : CU management contextro AdnMsupCtxType .1.3.6.1.4.1.637.3.1.8.5.13.2.1.1 |
adnMsupCtxIndexThe index of a context.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.13.2.1.2 |
adnMsupCtxActionThis object provides a mechanism to print on the CU craft
interface information about a context.
- dump : dumps the content of a context,
- address : displays the address of a context,
- format : displays the context in a C format.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.13.2.1.3 |
adnMsupPrintMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.13.3 |
adnMsupPrintInterfaceThis object is a bitmap that enables to activate the
printing of MSUP exchanges on the CU craft interface.
bit
val meaning
-
1 displays exchanges with SMSUP
2 displays exchanges with ATMSUP
4 displays exchanges with APSUP
8 displays exchanges with CUSUP
16 displays exchanges with NMGS in fixed format
32 displays exchanges with FLS
64 displays exchanges with Debug Manager
128 displays traps sent to SFAS
256 displays localization service messagesrw INTEGER .1.3.6.1.4.1.637.3.1.8.5.13.3.1 |
adnMsupPrintExecutionThis object is a bitmap that enables to activate the
printing of MSUP exchanges on the CU craft interface.
bit
val meaning
-
1 displays execution traces about coupler redundancy
2 displays execution traces about configuration
4 displays execution traces about clock synchronization
8 displays board automaton traces
16 displays processor automaton traces
32 displays execution traces about CU management
64 displays execution traces about coupler debug
128 displays execution traces about timer managementrw INTEGER .1.3.6.1.4.1.637.3.1.8.5.13.3.2 |
adnMsupPrintCouplerStrThis object enable to active the display of STR received
through SMSUP or APSUP from couplers on the CU craft
interfacerw Enumeration .1.3.6.1.4.1.637.3.1.8.5.13.3.3 |
adnMsupHssTraceMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.13.4 |
adnMsupHssTraceLocalizationServiceThis object indicates wether the MSUP localization
service writes into the MSUP HSS trace buffer.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.13.4.1 |
adnMsupHssTracePrintThis object indicates wether MSUP prints the HSS
traces on the CU craft interface in real time.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.13.4.2 |
adnMsupHssTraceFreezeThis object indicates wether the MSUP HSS trace
is frozen. On any CU restart this object is reset
to the default value.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.13.4.3 |
adnMsupHssTraceFreezeOnAnyStrThis object indicates wether the MSUP HSS trace
is to be frozen on next MSUP STR.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.13.4.4 |
adnMsupHssTraceFreezeOnStrNumberNumber of the STR on which to freeze the MSUP HSS trace.
0 is an unused STR number.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.13.4.5 |
adnMsupHssTraceDumpThis object provides a mechanism to dump on the CU
craft interface the formated content of the whole
MSUP HSS trace buffer.rw Enumeration .1.3.6.1.4.1.637.3.1.8.5.13.4.6 |
adnMsupHssTraceSizeThe size of the MSUP HSS trace buffer. A modification
of this object can only be taken into account at the next
start up.rw INTEGER .1.3.6.1.4.1.637.3.1.8.5.13.4.7 |
adnCvsiHssEnvMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.14 |
adnCvsiHssTableThis table is used by CVSI for the purpose of debugging. SEQUENCE OF AdnCvsiHssEntry .1.3.6.1.4.1.637.3.1.8.5.14.1 |
adnCvsiHssEntryAn entry in the CVSI HSS Table. AdnCvsiHssEntry .1.3.6.1.4.1.637.3.1.8.5.14.1.1 |
adnCvsiHssIndexThis entry represents the current instance or index of
the table. It is provided in order to be able to dump
each instance of each object.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.14.1.1.1 |
adnCvsiHssTraceCntlThis object provides a mechanism for controlling
Cvsi's ability to enable/disable tracing of
various types of messages.
The following are the possible values it can hold.
0 - Trace disabled
1 - Trace CVSI Library information messages
2 - Trace CVSI Library Minor error messages
4 - Trace CVSI Library Major error messages
8 - Trace CVSI Library detailed messages
16 - Trace CVSI relay messages
32 - Trace CVSI Master messages
64 - Trace ATM Signalling messages
128 - Trace CLCS messagesrw INTEGER .1.3.6.1.4.1.637.3.1.8.5.14.1.1.2 |
adnCvsiHssTraceAreaThis is the internal BINARY message trace entry
maintained by CVSI.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.14.1.1.3 |
adnCvsiHssCountersThis is the internal BINARY pointer to
set of Counters maintained by CVSI.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.14.1.1.4 |
adnCvsiHssGlobalVarsCVSI global variables.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.14.1.1.5 |
adnCvsiHssPrintCntlThis object provides a mechanism for controlling
Cvsi's ability to print on the CU console various
debugging information.
The following are the possible values for this object.
0 - Print disabled
1 - Print CVSI Library information messages
2 - Print CVSI Library Minor error messages
4 - Print CVSI Library Major error messages
8 - Print CVSI Library detailed messages
16 - Print CVSI relay messages
32 - Print CVSI Master messages
64 - Print ATM Signalling messages
128 - Print CLCS messagesrw INTEGER .1.3.6.1.4.1.637.3.1.8.5.14.1.1.6 |
adnCvsiHssVcActiveIndicates the number of active TDP Virtual
Circuits in the current node.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.14.1.1.7 |
adnRtsmgrMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.15 |
adnRtsmgrTraceTableThis table is used to get Message handling entries values for Route Manager. SEQUENCE OF AdnRtsmgrTraceEntry .1.3.6.1.4.1.637.3.1.8.5.15.1 |
adnRtsmgrTraceEntryEach entry (row) in the adnRtsmgrTraceTable. AdnRtsmgrTraceEntry .1.3.6.1.4.1.637.3.1.8.5.15.1.1 |
adnRtsmgrTraceIndexTrace Index Number. INTEGER .1.3.6.1.4.1.637.3.1.8.5.15.1.1.1 |
adnRtsmgrTraceValueThis string displays a string of 36 bytes combination of
Route Manager trace entry constants, trace entry variables,
and time stamp.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.15.1.1.2 |
adnIprtEnvMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.16 |
adnIpRouteNetstatTableThis is the IP Routing Environmental Table SEQUENCE OF AdnIpRouteNetstatEntry .1.3.6.1.4.1.637.3.1.8.5.16.1 |
adnIpRouteNetstatEntryThe IP Route Int Entry provides access to the CU TCP/UDP/IP stack
information. It is recommended that the objects of this table be
fetched with an SNMP get/getnext/etc. of all instances of the
given object without any index postfix. AdnIpRouteNetstatEntry .1.3.6.1.4.1.637.3.1.8.5.16.1.1 |
adnIpRouteNetstatIndexThis object defines the Index into this table.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.16.1.1.1 |
adnIpRouteNetstatIfconfigThis object defines the ASCII string that includes the CU IP
Interface description (similar to unix [netstat -i] command).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.8.5.16.1.1.2 |
adnIpRouteNetstatRoutesThis object defines the ASCII string that includes the CU IP
Forwarding memory cache (similar to unix [netstat -r] command).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.8.5.16.1.1.3 |
adnIpRouteNetstatProtStatsThis object defines the ASCII string that includes the CU IP/
TCP/UPD packet count statistics (similar to unix [netstat -s] command).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.8.5.16.1.1.4 |
adnIpRouteNetstatNetSocketsThis object defines the ASCII string that includes the CU IP
network sockets (similar to unix [netstat -a] command).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.8.5.16.1.1.5 |
adnIpRouteNetstatNetConnecThis object defines the ASCII string that includes the CU IP
network connections (similar to unix [netstat -A] command).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.8.5.16.1.1.6 |
adnIpRouteNetstatNetNumThis object defines the ASCII string that includes the CU IP
network numbers (similar to unix [netstat -n] command).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.8.5.16.1.1.7 |
adnIpRouteDiagTableThis is the IP Routing Environmental Table SEQUENCE OF AdnIpRouteDiagEntry .1.3.6.1.4.1.637.3.1.8.5.16.2 |
adnIpRouteDiagEntryThe IP Route Diag Entry defines IP Routing supplemental objects used
to diagnose/trouble shoot IP Routing subsystem problems. AdnIpRouteDiagEntry .1.3.6.1.4.1.637.3.1.8.5.16.2.1 |
adnIpRouteDiagIndexThis object defines the Index into this table.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.16.2.1.1 |
adnIpRouteDiagPrintFlags"Thisrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.16.2.1.2 |
adnRdssMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5.100 |
adnRdssRegistrationTableThis table contains an array of records to those subsystems
that have established IACS session with Routes Distribution. SEQUENCE OF AdnRdssRegistrationEntry .1.3.6.1.4.1.637.3.1.8.5.100.1 |
adnRdssRegistrationEntryEntry in the adnRdssRegistrationTable. AdnRdssRegistrationEntry .1.3.6.1.4.1.637.3.1.8.5.100.1.1 |
adnRdssRegLpxIndexThe LPX of subsystem which is registered to Routes
Distribution.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.1 |
adnRdssIcsRefICS Reference numberro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.2 |
adnRdssSessionIdThis field identifies which SWBB (IPforwarding, ISNA, GDC,
SFAS or PRTA) this registration entry is belong to.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.100.1.1.3 |
adnRdssCongestionFlagThis flag indicates whether the IACS session between Routes
Distribution and the registered subsystem (IPforwarding, ISNA,
GDC, SFAS or PRTA) in registration entry is congested or not.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.100.1.1.4 |
adnRdssFatSequenceNumThis field identifies the sequence number used to send the
last previous FAT message. The sequence number increments
sequentially on every new FAT message sent. It will be rolled
back to zero when reached maximum value.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.5 |
adnRdssGatSequenceNumThis field identifies the sequence number used to send the
last previous GAT message. The sequence number increments
sequentially on every new GAT message sent. It will be rolled
back to zero when reached maximum value.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.6 |
adnRdssMatSequenceNumThis field identifies the sequence number used to send the
last previous MAT message. The sequence number increments
sequentially on every new MAT message sent. It will be rolled
back to zero when reached maximum value.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.7 |
adnRdssAckFlagsThis is bit-map field represents the statuses of acknowledgment
from a previous transmitted FAT, GAT, or MAT message. Bit 0
represents FAT acknowledgment, bit 1 represents GAT
acknowledgment, and bit 2 represents MAT acknowledgment. If a
bit position has value of zero, it indicates the correspond
acknowledgment message has not been received. When an
acknowledgment message is received, its sequence number is
compared with the correspond transmitted message's sequence
number. If both are match, then the correspond Ack Flag bit will
be set. If both are not match, then the received message will
be ignored.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.8 |
adnRdssNextHopLastSequenceNumThis field hold the sequesnce number of the last received valid
Next-Hop message. It is used for handling duplicate received
messages. This field is intialized to 0xff.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.9 |
adnRdssLatLastSequenceNumThis field hold the sequesnce number of the last received valid
LAT message. It is used for handling duplicate received
messages. This field is intialized to 0xff.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.10 |
adnRdssMatLastSequenceNumThis field hold the sequesnce number of the last received valid
MAT message. It is used for handling duplicate received
messages. This field is intialized to 0xff.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.11 |
adnRdssTransmitMsgBufIdThis is the address of the message buffer for sending data.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.12 |
adnRdssGatTableTraverseStatusThis field is used to indentify whether the traversing is
currently on LPX, Ifindex or VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.13 |
adnRdssGatTableTraverseLpxKeyThis field is used to identify the LPX of corresponding interface
being traverse.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.14 |
adnRdssTypeOfTableRequestedThis field is bit-map defining what types of tables are to be
provided to the registering subsystem. Table types include
FAT, GAT, MAT, and etc.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.15 |
adnRdssGatTableTraverseStartKeyThis key is used for the purpose of distributing the entries
from the GAT table when a SWBB subsystem has just register
(just came up) with Routes Distribution.
The Start Key is the key to the first entry sent on the previous
message to aid in the scenario when retransmission of the
previous message is required. Set Start key to NULL to indicate
completed table has been sent, or table is empty. Set Start
Key to KEY {Root} to start traversal. Set Start Key equal to
End Key to indicate GAT table traversal is completed.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.16 |
adnRdssGatTableTraverseEndKeyThis key is used for the purpose of distributing the entries
from the GAT table when a SWBB subsystem has just register
(just came up) with Routes Distribution.
The End Key is the key to the last GAT entry sent on the
previous message, and is used to keep track of where in the
GAT table to continue for the next message.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.17 |
adnRdssGatMsgQueueStartPointerThe GAT message queue contains linked list of updated entries.
This start pointer marks an entry in the lists as beginning entry
in the lists to be sent or is sending to the correspond IP
Forwarding subsystem.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.18 |
adnRdssFatEntranceKeyThe FAT Entrance Key.
This field is used to set the starting point to traverse the FAT
table for this session.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.1.1.19 |
adnRdssForwardingTableThe forwarding table contains data information to be forwarded,
and status and control information relating to the entry itself
for table book keeping purpose. SEQUENCE OF AdnRdssForwardingEntry .1.3.6.1.4.1.637.3.1.8.5.100.2 |
adnRdssForwardingEntryEntry in the adnRdssForwardingTable. AdnRdssForwardingEntry .1.3.6.1.4.1.637.3.1.8.5.100.2.1 |
adnRdssDestIpAddressThe IP address of the destination prefix.ro IpAddress .1.3.6.1.4.1.637.3.1.8.5.100.2.1.1 |
adnRdssFatMaskThis field represent the valid number of leading bits in the
prefix of this address. It is the network IP mask.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.100.2.1.2 |
adnRdssFatFlagThis field represents the type of the destination IP address.ro Enumeration .1.3.6.1.4.1.637.3.1.8.5.100.2.1.3 |
adnRdssFatCommandThis is the same as the command field in the entry message
header. Except when the value od this field is 255, then it
is for internal used.ro AdnRdssCommandType .1.3.6.1.4.1.637.3.1.8.5.100.2.1.4 |
adnRdssFatStatusAckCntThis field conveys the status information of the entry itself.
It has dual functions and divided into two separated fields:
Entry Status field and ACK count field.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.100.2.1.5 |
adnRdssNextHopIpAddrThis field represents the IP address of the directly connected
router or the local IP address. If the adnRdssFatFlag is Local
Host entry, then this field is Zero.ro IpAddress .1.3.6.1.4.1.637.3.1.8.5.100.2.1.6 |
adnRdssFatLowerFsmThis longword is part of the three longwords which composes of
forty eight 2-bit fields. Each 2-bits field represents the FSM
of this entry to the corresponding IP Forwarding subsystem.
The FAT Entry Processing FSM Control Block keeps track of which
IP Forwarding this entry needed to be forwarding to, and which
IP Forwarding this entry has been forwarded to, and which
IP Forwarding has already acknowledged the reception of this
entry.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.2.1.7 |
adnRdssFatMidFsmThis longword is part of the three longwords which composes of
forty eight 2-bit fields. Each 2-bits field represents the FSM
of this entry to the corresponding IP Forwarding subsystem.
The FAT Entry Processing FSM Control Block keeps track of which
IP Forwarding this entry needed to be forwarding to, and which
IP Forwarding this entry has been forwarded to, and which
IP Forwarding has already acknowledged the reception of this
entry.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.2.1.8 |
adnRdssFatUpperFsmThis longword is part of the three longwords which composes of
forty eight 2-bit fields. Each 2-bits field represents the FSM
of this entry to the corresponding IP Forwarding subsystem.
The FAT Entry Processing FSM Control Block keeps track of which
IP Forwarding this entry needed to be forwarding to, and which
IP Forwarding this entry has been forwarded to, and which
IP Forwarding has already acknowledged the reception of this
entry.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.2.1.9 |
adnRdssGatIfindexTableThis table contains all information associated with
all the ifindexes, which are configured in the IP
Forwarding subsystems. SEQUENCE OF AdnRdssGatIfindexEntry .1.3.6.1.4.1.637.3.1.8.5.100.3 |
adnRdssGatIfindexEntryEntry in the adnRdssGatIfindexTable. AdnRdssGatIfindexEntry .1.3.6.1.4.1.637.3.1.8.5.100.3.1 |
adnRdssGatIfindexLpxIndexThe LPX of subsystem which is registered to Routes
Distribution.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.3.1.1 |
adnRdssGatIfIndexThis is the unique identifier associated to the logical
IP interface.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.3.1.2 |
adnRdssGatIfindexOptionType of LAT message.ro AdnRdssOption .1.3.6.1.4.1.637.3.1.8.5.100.3.1.3 |
adnRdssGatIfindexCommandTypeType of LAT command.ro AdnRdssCommandType .1.3.6.1.4.1.637.3.1.8.5.100.3.1.4 |
adnRdssGatIfindexStatusStatus of the ifindex.ro AdnRdssStatus .1.3.6.1.4.1.637.3.1.8.5.100.3.1.5 |
adnRdssGatIfLiiAddressThis field is the source address associated with the ifindex.ro IpAddress .1.3.6.1.4.1.637.3.1.8.5.100.3.1.6 |
adnRdssGatIfMaskThis field represents the valid number of leading bits in the
prefix of the adnRdssGatIfLiiAddress. It is the network IP mask.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.100.3.1.7 |
adnRdssGatIfServiceTypeThis field defines the type of the data link layer below the
<Ifindex, VPI/VCI or DLCI>. Refer to RFC 1512 for the exhaustive
list of the service types. We currently support only Frame
Relay and AAL5/ATM.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.100.3.1.8 |
adnRdssGatIfMtuThis field represents the size of the MTU associated with
this ifindex.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.100.3.1.9 |
adnRdssGatIfPrivateDataThis field is used by IPFW and is passed as it is from RDSS
to all other IP Forwarding subsystems.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.100.3.1.11 |
adnRdssGatIfBroadcastAddrThis field represents the broadcast IP address associated
with the Ifindex.ro IpAddress .1.3.6.1.4.1.637.3.1.8.5.100.3.1.12 |
adnRdssGatIfCostThis is the interface cost associated with the ifindex.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.3.1.13 |
adnRdssGatVcTableThis table contains all information associated with all the
VCs, which are configured in the IP Forwarding subsystems. SEQUENCE OF AdnRdssGatVcEntry .1.3.6.1.4.1.637.3.1.8.5.100.4 |
adnRdssGatVcEntryEntry in the adnRdssGatVcTable. AdnRdssGatVcEntry .1.3.6.1.4.1.637.3.1.8.5.100.4.1 |
adnRdssGatVcNextHopAddrThis field represents the IP address of the directly connected
router or the local IP address.ro IpAddress .1.3.6.1.4.1.637.3.1.8.5.100.4.1.1 |
adnRdssGatVcLpxThe LPX of subsystem which is registered to Routes
Distribution.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.4.1.2 |
adnRdssGatVcIfIndexThis is the unique identifier associated to the VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.4.1.3 |
adnRdssGatVcVpiVciOrDlciThis field represents the data link identifier (VPI/VCI for
AAL5 or DLCI for Frame Relay for the Next-Hop under
discussion.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.4.1.4 |
adnRdssGatVcOptionType of LAT message.ro AdnRdssOption .1.3.6.1.4.1.637.3.1.8.5.100.4.1.5 |
adnRdssGatVcCommandTypeType of LAT Vc command.ro AdnRdssCommandType .1.3.6.1.4.1.637.3.1.8.5.100.4.1.6 |
adnRdssGatVcStatusStatus of Vc.ro AdnRdssStatus .1.3.6.1.4.1.637.3.1.8.5.100.4.1.7 |
adnRdssGatVcServiceTypeThis field defines the type of the data link layer below the
<Ifindex, VPI/VCI or DLCI>. Refer to RFC 1512 for the exhaustive
list of the service types. We currently support only Frame
Relay and AAL5/ATM.ro INTEGER .1.3.6.1.4.1.637.3.1.8.5.100.4.1.8 |
adnRdssGatVcCostThis is the interface cost associated with the ifindex.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.4.1.9 |
adnRdssGatVcLiiAddressThis field is the source address associated with the ifindex.ro IpAddress .1.3.6.1.4.1.637.3.1.8.5.100.4.1.10 |
adnRdssTraceTableEach entry (row) in the adnRdssTraceTable SEQUENCE OF AdnRdssTraceEntry .1.3.6.1.4.1.637.3.1.8.5.100.5 |
adnRdssTraceEntryEach entry (row) in the adnRtsagtTraceTable. AdnRdssTraceEntry .1.3.6.1.4.1.637.3.1.8.5.100.5.1 |
adnRdssTraceLpxIndexLPX of registered subsystems. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.8.5.100.5.1.1 |
adnRdssTraceIndexTrace Index Number INTEGER .1.3.6.1.4.1.637.3.1.8.5.100.5.1.2 |
adnRdssTraceValueThis is the binary.ro OCTET STRING .1.3.6.1.4.1.637.3.1.8.5.100.5.1.3 |
adnEnvMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.2 |
IMPORTS Unknown .1.3.6.1.4.1.637.3.2 |