ACC-NOTIFICATION-MIB
AI MIB Summary
The ACC-NOTIFICATION-MIB configures remote parameters for the ACC NetController software to control the generation and transmission of SNMP traps and notifications. This module manages the operational behavior of alert mechanisms rather than monitoring specific hardware performance metrics or traffic counters.
This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an ACC NetController software for the generation of notifications.
Main OID:
accNotificationMIB.1.3.6.1.4.1.10829.4.1
16
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
accNotificationMIBThis MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an ACC NetController software for the generation of notifications. MODULE-IDENTITY .1.3.6.1.4.1.10829.4.1 |
accNotifyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.10829.4.1.1 |
accNotifyList OBJECT IDENTIFIER .1.3.6.1.4.1.10829.4.1.1.1 |
accNotifyNumbercount of entries in the Notify Tablero Integer32 .1.3.6.1.4.1.10829.4.1.1.1.1 |
accNotifyTableThis table is used to select management targets which should receive notifications, as well as the type of notification which should be sent to each selected management target. SEQUENCE OF AccNotifyEntry .1.3.6.1.4.1.10829.4.1.1.1.2 |
accNotifyEntryAn entry in this table selects a set of management targets which should receive notifications, as well as the type of notification which should be sent to each selected management target. AccNotifyEntry .1.3.6.1.4.1.10829.4.1.1.1.2.1 |
notifyIndexThe locally arbitrary, but unique identifier associated with this accNotifyEntry.ro Unsigned32 .1.3.6.1.4.1.10829.4.1.1.1.2.1.1 |
notifyAddressThis object contains an IP Address as the destination of a notificationrw IpAddress .1.3.6.1.4.1.10829.4.1.1.1.2.1.2 |
notifyTypeThis object determines the type of notification to be generated. If the value of this object is none(0), then no messages will be generated. If the value of this object is trap(1), then any messages generated for selected rows will contain SNMPv2-Trap PDUs.rw Enumeration .1.3.6.1.4.1.10829.4.1.1.1.2.1.3 |
notifyStorageTypeThe storage type for this conceptual row.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.10829.4.1.1.1.2.1.4 |
notifyRowStatusThe status of this conceptual row. To set a field, a manager must set the this object to inActive(2), then do the set. After finish, change it to active(1).rw Enumeration .1.3.6.1.4.1.10829.4.1.1.1.2.1.5 |
accNotifyConformance OBJECT IDENTIFIER .1.3.6.1.4.1.10829.4.1.3 |
accNotifyCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.10829.4.1.3.1 |
accNotifyBasicComplianceModule Compliance Unknown .1.3.6.1.4.1.10829.4.1.3.1.1 |
accNotifyGroups OBJECT IDENTIFIER .1.3.6.1.4.1.10829.4.1.3.2 |
accNotifyGroupA collection of objects for selecting which management targets are used for generating notifications, and the type of notification to be generated for each selected management target. Unknown .1.3.6.1.4.1.10829.4.1.3.2.1 |