ACC-NC-ALARM-MIB
AI MIB Summary
The ACC-NC-ALARM-MIB facilitates SNMP-based monitoring of alarm states and notifications generated by Andover Controls Continuum building automation controllers. It maps proprietary hardware alarm conditions into standard MIB objects to enable centralized fault detection and event logging within network management systems.
This MIB module defines MIB objects and notifications which are mapped from Andover Controls Continuum Alarms
Main OID:
accAlarmMIB.1.3.6.1.4.1.10829.5.2.1
24
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
accAlarmMIBThis MIB module defines MIB objects and notifications which are mapped from Andover Controls Continuum Alarms MODULE-IDENTITY .1.3.6.1.4.1.10829.5.2.1 |
alarmListMaxMaximum number of elements in the Alarm List table not including internal alarms, such as Controller Reset, Alarm Table Overflow.ro Integer32 .1.3.6.1.4.1.10829.5.2.1.1 |
alarmList OBJECT IDENTIFIER .1.3.6.1.4.1.10829.5.2.1.2 |
alarmTableDescription. SEQUENCE OF AlarmEntry .1.3.6.1.4.1.10829.5.2.1.2.2 |
alarmEntryDescription. AlarmEntry .1.3.6.1.4.1.10829.5.2.1.2.2.1 |
alarmControllerNameNetController name upon which this table exists.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10829.5.2.1.2.2.1.1 |
alarmInfinetControllerNameInfinet controller name upon which the point in alarm resides. This could also be null, if the point is on the NetController itself.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10829.5.2.1.2.2.1.2 |
alarmPointNameContinuum point name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10829.5.2.1.2.2.1.3 |
alarmPointDescriptionContinuum point description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10829.5.2.1.2.2.1.4 |
alarmAlarmNameContinuum alarm name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10829.5.2.1.2.2.1.5 |
alarmStateThis is the state of the corresponding Continuum alarm as was learned from the last alarm transition.ro Enumeration .1.3.6.1.4.1.10829.5.2.1.2.2.1.6 |
alarmAlmTimeTime stamp when point entered alarm (ALM) state. This could also be null, if no transition to ALM occured.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.10829.5.2.1.2.2.1.7 |
alarmAlmValueValue when point went into alarm (ALM) state. This could also be null, if no transition to ALM occured.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10829.5.2.1.2.2.1.8 |
alarmRtnTimeTime stamp when point returned to normal (RTN) state. This could also be null, if no transition to RTN occured.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.10829.5.2.1.2.2.1.9 |
alarmRtnValueValue when point state returned to normal (RTN). This could also be null, if no transition to RTN occured.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.10829.5.2.1.2.2.1.10 |
alarmIENADIENAD that identifies point in IE table; 0 for internal alarm.ro OCTET STRING .1.3.6.1.4.1.10829.5.2.1.2.2.1.12 |
alarmLinkNumber identifying which Continuum alarm link 1-8; 1 for Controller Reset alarm; 2 for Alarm Table Overflowro INTEGER .1.3.6.1.4.1.10829.5.2.1.2.2.1.13 |
alarmTransitionEventThis is the row of the alarm table that is sent as a notification to an SNMP manager. NOTIFICATION-TYPE .1.3.6.1.4.1.10829.5.2.1.3 |
alarmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.10829.5.2.1.4 |
alarmCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.10829.5.2.1.4.1 |
alarmBasicComplianceModule Compliance for agent. Agent must support these groups. Unknown .1.3.6.1.4.1.10829.5.2.1.4.1.1 |
alarmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.10829.5.2.1.4.2 |
alarmGroupObjects the agent must support. Unknown .1.3.6.1.4.1.10829.5.2.1.4.2.1 |
alarmEventsEvents the agent must support. Unknown .1.3.6.1.4.1.10829.5.2.1.4.2.2 |