AC-PSTN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for AC-PSTN-MIB.
Main OID:
acPSTN.1.3.6.1.4.1.5003.9.10.9
119
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
119 total| Object Name |
|---|
acPSTN MODULE-IDENTITY .1.3.6.1.4.1.5003.9.10.9 |
acPSTNConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1 |
acTrunkConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.1 |
acTrunk OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.1.1 |
acTrunkTable SEQUENCE OF AcTrunkEntry .1.3.6.1.4.1.5003.9.10.9.1.1.1.1 |
acTrunkEntry AcTrunkEntry .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1 |
acTrunkIndexTrunk ID at board in which the call is taking place. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.1 |
acTrunkAdministrativeStateTrunk Administrative State. Access: Online. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.2 |
acTrunkProtocolTypeUsed to set the PSTN protocol to be used for this trunk. Relevant only when TDMBusType=acFRAMERS (2). Either: NONE = 0 E1_EURO_ISDN = 1 T1_CAS = 2 T1_RAW_CAS = 3 T1_TRANSPARENT = 4 E1_TRANSPARENT_31 = 5 E1_TRANSPARENT_30 = 6 E1_MFCR2 = 7 E1_CAS = 8 E1_RAW_CAS = 9 T1_NI2_ISDN = 10 T1_4ESS_ISDN = 11 T1_5ESS_9_ISDN = 12 T1_5ESS_10_ISDN = 13 T1_DMS100_ISDN = 14 J1_TRANSPARENT = 15 T1_NTT_ISDN = 16 E1_AUSTEL_ISDN = 17 E1_HKT_ISDN = 18 E1_KOR_ISDN = 19 T1_HKT_ISDN = 20 E1_QSIG = 21 E1_TNZ_ISDN = 22 T1_QSIG = 23 T1_IUA = 28 E1_IUA = 29 E1_FRENCH_VN6_ISDN = 30 E1_FRENCH_VN3_ISDN = 31 T1_EURO_ISDN = 34 T1_DMS100_MERIDIAN_ISDN = 35 T1_NI1_ISDN = 36 E1_DUA = 37 E1_Q931_PACKETS = 38 T1_Q931_PACKETS = 39 E1_NI2_ISDN = 40 E1-CAS-R15 = 41 V5 = 43 BRI-EURO-ISDN = 50 BRI-NI-2 = 51 BRI-DMS100 = 52 BRI-5ESS = 53 BRI-QSIG = 54 BRI-VNG = 55 BRI-NTT = 56 BRI-IUA = 57. . Access: Online. AC INI-Param: PROTOCOLTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.3 |
acTrunkClockMasterUsed to select the trunk clock source. 0 = acCLOCK_MASTER_OFF (clock recovered from the line) 1 = acCLOCK_MASTER_ON (the trunk clock source is provided by the internal/TDM bus clock source depending on the parameter TDM Bus Clock Source). Access: Online. AC INI-Param: CLOCKMASTERrw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.4 |
acTrunkFramingMethodSelects the Framing method to be used for this trunk. Access: Online. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.5 |
acTrunkLineCodeUse to select line code. B8ZS or AMI for T1 spans and HDB3 or AMI for E1 spans. 0 = Use B8ZS line code (for T1 trunks only = default) 1 = Use AMI line code (for T1 or E1 trunks) 2 = Use HDB3 line code (for E1 trunks only). Access: Online. AC INI-Param: LINECODErw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.6 |
acTrunkTraceLevelDefines the Trace level: acNO_TRACE = 0 acFULL_ISDN_TRACE = 1 acLAYER3_ISDN_TRACE = 2 acONLY_ISDN_Q931_MSGS_TRACE = 3 acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4 acFULL_ISDN_TRACE_WITH_DUPLICATION = 5 acISDN_Q931_RAW_DATA_TRACE = 6 acISDN_Q921_RAW_DATA_TRACE = 7 acISDN_Q931_Q921_RAW_DATA_TRACE = 8 acSS7_MTP2 = 10 acSS7_MTP2_AND_APPLI = 11 acSS7_MTP2_SL_L3_NO_MSU = 12 acSS7_AAL = 15. Access: Online. AC INI-Param: TRACELEVELrw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.7 |
acTrunkDialPlanNameSets the Dial Plan name that will be used on the specific trunk. Range = string 11 characters. Access: Instant. AC INI-Param: CasTrunkDialPlanNamerw SnmpAdminString .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.8 |
acTrunkLineTypeLine type. lineTypeBRI(12) - If the physical type is BRI. lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are other lines that are already configured to either E1 or T1. lineTypeUnknown(-1) - For non BRI IF when no lines are configured. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.9 |
acTrunkAutoClockPriorityDefines the trunk priority for auto-clock fallback (Priority range: 0 - 100 (0 - 99 are priority settings, in which 0 = highest Priority and is the default setting 100 = Do not choose this trunk). Access: Online. AC INI-Param: AutoClockTrunkPriorityrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.10 |
acTrunkDeactivateDeactivating a trunk forces AIS alarm on that trunk. Deactivation is used for trunk maintenance without locking the trunk. Activating the trunk will stop the alarm on the trunk. notAvailable(0) appears when the trunk is locked. The trunk can't be SET to this state. Access: Online. AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.11 |
acTrunkLine OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.1.2 |
acTrunkLineTable SEQUENCE OF AcTrunkLineEntry .1.3.6.1.4.1.5003.9.10.9.1.1.2.1 |
acTrunkLineEntry AcTrunkLineEntry .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1 |
acTrunkLineBuildOutLossUsed to select the line build out loss to be used for this trunk. 0 = 0 dB 1 = 7.5 dB 2 = 15 dB 3 = 22.5 dB. Access: Online. AC INI-Param: LINEBUILDOUT.LOSSrw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.1 |
acTrunkLineBuildOutOverwriteUsed to overwrite the Framer's XPM registers values (these registers control the line pulse shape). 0 = No overwrite 1 = Overwrite. Access: Online. AC INI-Param: LINEBUILDOUT.OVERWRITErw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.2 |
acTrunkLineBuildOutXPM0Used to control the Framer's XPM0 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 255. Access: Online. AC INI-Param: LINEBUILDOUT.XPM0rw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.3 |
acTrunkLineBuildOutXPM1Used to control the Framer's XPM1 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 255. Access: Online. AC INI-Param: LINEBUILDOUT.XPM1rw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.4 |
acTrunkLineBuildOutXPM2Used to control the Framer's XPM2 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert users. Range = 0 to 255. Access: Online. AC INI-Param: LINEBUILDOUT.XPM2rw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.5 |
acTrunkISDN OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.1.3 |
acTrunkISDNCommon OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.1.3.1 |
acTrunkISDNCommonTable SEQUENCE OF AcTrunkISDNCommonEntry .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1 |
acTrunkISDNCommonEntry AcTrunkISDNCommonEntry .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1 |
acTrunkISDNCommonTerminationSideUsed to set the ISDN Termination to either User or Network. Termination = For ISDN only. User side = 0 Network side = 1. Access: Online. AC INI-Param: TERMINATIONSIDErw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.1 |
acTrunkISDNCommonQ931LayerResponseBehaviorBit-field used to determine several behavior options, which influence how the Q.931 protocol behaves. Access: Online. AC INI-Param: ISDNIBEHAVIORrw Integer32 (-2147483647..2147483647) .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.2 |
acTrunkISDNCommonIncomingCallsBehaviorThis is the bit-field used to determine several behavior options that influence how the ISDN Stack INCOMING calls behave. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740. Access: Online. AC INI-Param: ISDNINCALLSBEHAVIORrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.3 |
acTrunkISDNCommonOutgoingCallsBehaviorThis is the bit-field used to determine several behavior options that influence how the ISDN Stack OUTGOING calls behave. Refer to Appendix A.8 in the 'VoPLib Reference Library User's Manual. Access: Online. AC INI-Param: ISDNOUTCALLSBEHAVIORrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.4 |
acTrunkISDNCommonGeneralCCBehaviorThis is the bit-field used to determine several general ISDN behavior options. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740. Access: Online. AC INI-Param: ISDNGENERALCCBEHAVIORrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.5 |
acTrunkISDNCommonIuaInterfaceIdDefines the IUA trunk interface ID value - unsigned integer - in RFC 3057 - SIGTRAN. Default = 0xFFFFFFFF. AC INI-Param: N/Aro Integer32 (-1..2147483647) .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.6 |
acTrunkISDNCommonDuplicateQ931BuffModeActivates / de-activates delivery of raw Q.931 messages. Refer to the VoPLib documentation ('ISDN Flexible Behavior'). Access: Online. AC INI-Param: ISDNDUPLICATEQ931BUFFMODErw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.7 |
acTrunkISDNCommonBRILayer2ModeIndicates point to point or point to Multipoint mode for layer2. Applicable in BRI trunks only. One of the following values: Point to point = 0 Point to Multipoint = 1 . Access: Online. AC INI-Param: BriLayer2Moderw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.8 |
acTrunkISDNNfas OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.1.3.2 |
acTrunkISDNNfasTable SEQUENCE OF AcTrunkISDNNfasEntry .1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1 |
acTrunkISDNNfasEntry AcTrunkISDNNfasEntry .1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1 |
acTrunkISDNNfasDchConfigDefines D-channel configuration. This setting is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = D-channel is Primary 1 = Backup 2 = NFAS. Access: Online. AC INI-Param: DCHCONFIGrw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.1 |
acTrunkISDNNfasInterfaceIdDefines the Interface ID. Works with NS_EXPLICIT_INTERFACE_ID. Refer to the VoPLib documentation(ISDN Flexible Behavior). Default = (unsigned char)-1. Range = 0 to 255. Access: Online. AC INI-Param: ISDNNFASINTERFACEIDrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.2 |
acTrunkISDNNfasGroupNumberRelevant only for T1 ISDN NFAS trunks indicates the group number of the NFAS group. ;Valid NFAS group numbers are only 1 to 9, 0 indicating that this trunk is not NFAS (in this case the ISDNNFASInterfaceID and DchConfig parameters are ignored). Access: Online. AC INI-Param: NFASGROUPNUMBERrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.3 |
acTrunkISDNDpnss OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.1.3.3 |
acTrunkISDNDpnssTable SEQUENCE OF AcTrunkISDNDpnssEntry .1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1 |
acTrunkISDNDpnssEntry AcTrunkISDNDpnssEntry .1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1 |
acTrunkISDNDpnssBehaviorThe DPNSSBehaviour parameter represents a Bit field parameter. Each bit represents a specific type of DPNSS behavior. Currently only the first 2 bits are in use. - DPNSS_BEHAV_STOP_SABMR_AFTER_NL_AND_NT1 bit: (bit #0, bit mask 0x0001) When set to 1: DPNSS stops repeating SABMR after NL and NT1 limits are exceeded. When set to 0: DPNSS continues repeating SABMR after NL and NT1 limits are exceeded. Default is 0 (continue repeating SABMR) - DPNSS_BEHAV_FULL_STARTUP_SUCCESS bit: (bit #1, bit mask 0x0002) When set to 1: the Startup Procedure is considered as a SUCCESS only when ALL DLCs succeeded to Reset When set to 0: the Startup Procedure is considered as a SUCCESS as soon as 1 DLC succeeded to Reset Default is 0: (only partial reset is considered as a success). . Access: Online. AC INI-Param: DPNSSBehaviorrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.1 |
acTrunkISDNDpnssNumRealChannelsThis parameter is relevant only to protocol ISDN DPNSS. Defines the number of real channels. Default value is 30. Valid range 1 to 30. Access: Online. AC INI-Param: DPNSSNumRealChannelsrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.2 |
acTrunkISDNDpnssNumVirtualChannelsThis parameter is relevant only to protocol ISDN DPNSS. Defines the number of virtual channels. Default value is 30. Valid range 0 to 30. Access: Online. AC INI-Param: DPNSSNumVirtualChannelsrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.3 |
acTrunkCAS OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.1.4 |
acTrunkCASTable SEQUENCE OF AcTrunkCASEntry .1.3.6.1.4.1.5003.9.10.9.1.1.4.1 |
acTrunkCASEntry AcTrunkCASEntry .1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1 |
acTrunkCASTablesIndexThis parameter determines which CAS protocol file to use on a specific trunk. The index value corresponds to the number configured for the parameter CASFileName_X. Range = not greater than the parameter defining the PSTN CAS Table Num. Access: Online. AC INI-Param: CASTABLEINDEXrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1.1 |
acTrunkCASTablePerChannelSets the Cas protocol table index per channel. User need to set each channel the table number 0-7, with comma saperator between channels: '1,3,1,3,1,3..'. Access: Online. AC INI-Param: CasChannelIndexrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1.2 |
acTrunkV5 OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.1.5 |
acTrunkV5Table SEQUENCE OF AcTrunkV5Entry .1.3.6.1.4.1.5003.9.10.9.1.1.5.1 |
acTrunkV5Entry AcTrunkV5Entry .1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1 |
acTrunkV5NumberOfCChannelsIndicates the number of timeslots used as communication channels in a V5 trunk. 0 - No C-channel, the trunk is voice only. 1 - Timeslot 16 is used for the V5 signaling . Access: Online. AC INI-Param: V5NumberOfCChannelsrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1.1 |
acTrunkV5ProtocolSideIndicates the V5 side of the V5 protocol served by the trunk.. 0 - AN side. 1 - LE side . Access: Online. AC INI-Param: V5ProtocolSiderw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1.2 |
acTrunkGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.1.8 |
acTrunkGlobalLifeLineTypeThis parameter is used to define the type of trunk lifeline. Short trunks 1-2, 3-4. 0 = Activate lifeline on power down 1 = Activate lifeline on power down or on detection of LAN disconnect 2 = Activate lifeline on power down or on detection of LAN disconnect or loss of ping. Access: Offline. AC INI-Param: TrunkLifeLineTyperw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.1.8.1 |
acISDNConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.2 |
acMiscISDN OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.2.1 |
acMiscISDNQ931RelayModeActivates / de-activates the ISDN level 3 Q.931 Relay Mode. Choose 0 or ActivateLAPDmessaging or Q931_RELAY_TO_HOST or Layer3_IS_IUA. Access: Offline. AC INI-Param: Q931RELAYMODErw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.2.1.1 |
acMiscISDNDuplicateQ931BuffModeAccess: Offline. AC INI-Param: ISDNDUPLICATEQ931BUFFMODErwobsolete Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.2.1.2 |
acDS3Config OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.3 |
acDS3ConfigFramingMethodUsed to select the physical DS3 framing method to be used in this board. 0 = M23 framing 1 = C Bit Parity. Access: Offline. AC INI-Param: DS3FRAMINGMETHODrwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.9.1.3.1 |
acDS3ConfigClockSourceSelects the physical DS3 framing method to be used in this board. Applicable only to the TP-2810. 0 = DS3 Clock is recovered from the line 1 = DS3 trunk clock source is provided by the board's internal clock 2 = Clock is taken from the local PLL which is not synchronized with any other clock. Access: Offline. AC INI-Param: DS3CLOCKSOURCErwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.9.1.3.2 |
acDS3ConfigLineBuiltOutUsed to select the DS3 line build out. Applies only to the TP-2810. Access: Offline. AC INI-Param: DS3LINEBUILTOUTrwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.9.1.3.3 |
acCasConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.4 |
acCasConfigEnableThis parameter enables or disables the possibility CAS protocol configuration. At TP6310 When this parameter is enable the conference will disabled in case it's relevant. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: CASProtocolEnablerw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.4.1 |
acCASFile OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.4.2 |
acCASFileTable SEQUENCE OF AcCASFileEntry .1.3.6.1.4.1.5003.9.10.9.1.4.2.1 |
acCASFileEntry AcCASFileEntry .1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1 |
acCASFileIndexCas Table Indexd. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1.1 |
acCASFileNameThis is a pointer to the CAS filename index (0-7). The index is CASFileName_X. CASFileName_0 through to CASFileName_7 are the path and names of the CAS protocol configuration files. AC INI-Param: CASFILENAMEro SnmpAdminString .1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1.2 |
acSonetSDH OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.1.5 |
acSonetSDHTable SEQUENCE OF AcSonetSDHEntry .1.3.6.1.4.1.5003.9.10.9.1.5.1 |
acSonetSDHEntry AcSonetSDHEntry .1.3.6.1.4.1.5003.9.10.9.1.5.1.1 |
acSonetSDHIndexFiber groupe index. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.1 |
acSonetSDHFbrGrpMappingTypeSelects SDH/SONET mapping type (signal label + payload mapping type) for the PSTN interface. Generally per Fiber Group. Single Fiber Group supported in the PSTN interface of TP6310 and TP12610. Applicable only to the TP-6310 and TP-12610. Relevant only when acSysTDMBusType = acFRAMERS (2). 0 = Asynchronous VT1.5 and DS1 1 = Asynchronous TU12 and E1 3 = Asynchronous mapping of DS3 in STS1, DS3 channelized to DS1s 15 = Undefined Should be in coordination with other parameters as follows: - sonetMediumType - acTrunkProtocolType. Access: Offline. AC INI-Param: SDHFbrGrp_Mapping_Typerw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.2 |
acSonetSDHFbrGrpKlmNumberingSchemeProvides VC/VT numbering scheme for STM-1/OC3 fiber group. Access: Offline. AC INI-Param: SDHFbrGrp_KLM_Numbering_Schemerw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.3 |
acSonetSDHFbrGrpAPSDirectionModeSets the Automatic Protection Switch Unidir/Bidir mode for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_DirModerw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.4 |
acSonetSDHFbrGrpAPSRevertModeSets the Automatic Protection Switch Revertive mode for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_RevertModerw Enumeration .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.5 |
acSonetSDHFbrGrpAPSWaitToRestoreTimeSets the APS Wait-to-restore time for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_WTRrw Unsigned32 .1.3.6.1.4.1.5003.9.10.9.1.5.1.1.6 |
acPSTNStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.2 |
acTrunkStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.2.1 |
acTrunkStatusTable SEQUENCE OF AcTrunkStatusEntry .1.3.6.1.4.1.5003.9.10.9.2.1.1 |
acTrunkStatusEntry AcTrunkStatusEntry .1.3.6.1.4.1.5003.9.10.9.2.1.1.1 |
acTrunkStatusLedStatusColorTrunk led status color. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.1 |
acTrunkStatusLedStatusStateTrunk led status blinking rate. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.2 |
acTrunkStatusChannelsReperesents Trunk's Channels-Status. Each nibble (half Byte) presents one channel status, as following: 1 - invalid B-Channel. 2 - None. 3 - Open. 4 - Media. 5 - SS7. 6 - HDLC. 7 - DPNSS. 8 - CAS. AC INI-Param: N/Aro OCTET STRING .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.3 |
acTrunkStatusV5InterfaceNumV5.2 interface containing this trunk. -1 means information not available or not relevant. AC INI-Param: N/Aro Integer32 (-1..31) .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.4 |
acTrunkStatusV5LinkIDV5.2 link containing this trunk. -1 means information not available or not relevant. AC INI-Param: N/Aro Integer32 (-1..62) .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.5 |
acTrunkStatusDChannelDescribes the trunk's D channel status. 0 - dChannelEstablished 1 - dChannelNotEstablished 10 - dChannelNotApplicable. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.6 |
acTrunkStatusAlarmDescribes the trunk's alarm status. 1 - Disabled. 2 - Active - OK. 3 - LOS/LOF Alarm. 4 - AIS Alarm. 5 - RAI Alram. 6 - D-Channel Alarm. 7 - Lower Layer Down. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.9.2.1.1.1.7 |
acDigitalLegs OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.2.2 |
acDigitalLegsTable SEQUENCE OF AcDigitalLegsEntry .1.3.6.1.4.1.5003.9.10.9.2.2.1 |
acDigitalLegsEntry AcDigitalLegsEntry .1.3.6.1.4.1.5003.9.10.9.2.2.1.1 |
acDigitalLegsLegIndexDecribes The Digital EndPoint In A Call. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.1 |
acDigitalLegsCallIndexDecribes The Call which The Digital EndPoint Participant In It. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.2 |
acDigitalLegsTrunkDescribes the Trunk the Leg belong to. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.3 |
acDigitalLegsBchannelDescribes the Bchannel the Leg belong to. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.4 |
acDigitalLegsEchoCancellerEnables or Disables the Echo Canceller. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.5 |
acDigitalLegsDTMFDetectionEnables or Disables the DTMF Detection. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.6 |
acDigitalLegsVoiceVolumeDescribs the volume of the voice in dB. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.7 |
acDigitalLegsHighPassFilterEnables or Disables theHigh Pass Filter. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.8 |
acDigitalLegsInputGainDescribes the Input Gain on the leg in dB. AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.9 |
acDigitalLegsDSPDevicedescribes the DSP Device the Leg connected to. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.10 |
acDigitalLegsLegNameDescribes the Leg Name as in the Control Protocol. AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.9.2.2.1.1.11 |
acSDHKLMNumberingScheme OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.2.3 |
acSDHKLMNumberingSchemeTable SEQUENCE OF AcSDHKLMNumberingSchemeEntry .1.3.6.1.4.1.5003.9.10.9.2.3.1 |
acSDHKLMNumberingSchemeEntry AcSDHKLMNumberingSchemeEntry .1.3.6.1.4.1.5003.9.10.9.2.3.1.1 |
acSDHKLMNumberingSchemeTrunkIndexTrunk Number. AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.3.1.1.1 |
acSDHKLMNumberingSchemeTUG3OrSTS1AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.3.1.1.2 |
acSDHKLMNumberingSchemeTUG2OrVTGAC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.3.1.1.3 |
acSDHKLMNumberingSchemeTU12OrVT15AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.3.1.1.4 |
acFiberGroupStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.9.2.4 |
acFiberGroupStatusActiveLinkFiber group active link number. 0 - there is no active fiber group link. AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.9.2.4.1 |