AC-MEDIA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for AC-MEDIA-MIB.
Main OID:
acMedia.1.3.6.1.4.1.5003.9.10.4
277
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
277 total| Object Name |
|---|
acMedia MODULE-IDENTITY .1.3.6.1.4.1.5003.9.10.4 |
IMPORTS Unknown .1.3.6.1.4.1.5003.9.10.4 |
acMediaConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1 |
acMediaDSPConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.1 |
acMediaDSPConfigVersionTemplateNumberSelects the DSP load number. Each load has a different coder
list, a different channel capacity and different features supported.
Range = 0 to 255.
Access: Offline.
AC INI-Param: DSPVERSIONTEMPLATENUMBERrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.1.1 |
acMediaDspTable SEQUENCE OF AcMediaDspEntry .1.3.6.1.4.1.5003.9.10.4.1.1.21 |
acMediaDspEntry AcMediaDspEntry .1.3.6.1.4.1.5003.9.10.4.1.1.21.1 |
acMediaDspIndexEntry number in the table.
AC INI-Param: DspTemplates_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.1.21.1.1 |
acMediaDspRowStatusROWSTATUS field for line. Internal parameter.
AC INI-Param: N/Arw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.4.1.1.21.1.2 |
acMediaDspTemplateNumberDSP template number.
Access: Offline.
AC INI-Param: DspTemplates_DspTemplateNumberrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.1.21.1.3 |
acMediaDspResourcesPercentagePercentage use for the specified template.
Access: Offline.
AC INI-Param: DspTemplates_DspResourcesPercentagerw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.1.21.1.4 |
acMediaVoiceConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.2 |
acVoice OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.2.1 |
acVoicePayloadFormatSets the voice payload format. Choose either 0 = RTP or 1 =
ATM (which enables working with vendors that use G.726 ATM Payload
Format over RTP. Uses the enum acTVoicePayloadFormat.
0 = VoicePayloadFormatRTP
1 = VoicePayloadFormatATM
2 = VoicePAyloadFormatIllegal.
Access: Online.
AC INI-Param: VOICEPAYLOADFORMATrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.1 |
acVoiceVolumeDefines the voice output gain control.
Range: -32 dB to +31 dB in 1 dB steps
-32 = mute
Default = 0 = No Gain.
Access: Online.
AC INI-Param: VOICEVOLUMErw Integer32 (-32..31) .1.3.6.1.4.1.5003.9.10.4.1.2.1.2 |
acVoiceInputGainDefines the PCM input gain.
Range = -32 dB to +31 dB in 1 dB steps.
Default = No Gain.
Access: Online.
AC INI-Param: INPUTGAINrw Integer32 (-32..31) .1.3.6.1.4.1.5003.9.10.4.1.2.1.3 |
acVoiceTestModeDefines the type of testing mode applied:
0 = Coder Loopback performs an encoder/decoder loopback inside
the DSP device
1 = PCM Loopback loops back an incoming PCM to the outgoing
PCM.
2 = ToneInjection generates a 1000 Hz tone to the outgoing
PCM
3 = NoLoopback sets the channel to work in normal mode.
Access: Online.
AC INI-Param: TESTMODErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.4 |
acVoiceTTYTransportTypeDefines the transferring method of TTY signals during a call
0 = Disable
1= Bypass
2 = Relay
.
Access: Online.
AC INI-Param: TTYTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.5 |
acVoiceEnableMediaSecurityEnables or disables Media Security protocol (SRTP) . Enabling
this parameter might reduce the board channel capacity.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: ENABLEMEDIASECURITYrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.6 |
acVoiceCoderRate OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.2.1.20 |
acVoiceCoderRateEVRCThis parameter is used to configure the EVRC coder bit rate.
0 = Variable Rate
1 = 1 kbps
2 = 4 kbps
3 = 8 kbps.
Access: Online.
AC INI-Param: EVRCRaterw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.20.1 |
acVoiceCoderRateQCELP8This parameter is used to configure the QCELP8 coder bit rate.
0 = Variable Rate
1 = 1 kbps
2 = 2 kbps
3 = 4 kbps
4 = 8 kbps.
Access: Online.
AC INI-Param: QCELP8Raterw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.20.2 |
acVoiceCoderRateQCELP13This parameter is used to configure the QCELP13 coder bit rate.
0 = Variable Rate
1 = 1 kbps
2 = 3 kbps
3 = 7 kbps
4 = 13 kbps
.
Access: Online.
AC INI-Param: QCELP13Raterw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.20.3 |
acVoiceCoderRateG729EVMaxBitRateDetermines the maximum generation bitrate for all participants
in a session using G729EV coder. This parameter is defined
per session and is equal for all the parties. The initial
generation bit rate is the minimum between the MaxBitRate and
the MBS values.
Possible values are:
0 = G729EV_RATE_8_KBPS
1 = G729EV_RATE_12_KBPS
2 = G729EV_RATE_14_KBPS
3 = G729EV_RATE_16_KBPS
4 = G729EV_RATE_18_KBPS
5 = G729EV_RATE_20_KBPS
6 = G729EV_RATE_22_KBPS
7 = G729EV_RATE_24_KBPS
8 = G729EV_RATE_26_KBPS
9 = G729EV_RATE_28_KBPS
10 = G729EV_RATE_30_KBPS
11 = G729EV_RATE_32_KBPS
15 = G729EV_RATE_UNDEFINED.
Access: Online.
AC INI-Param: G729EVMaxBitRaterw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.20.4 |
acVoiceCoderRateG729EVLocalMBSDetermines the maximal bitrate, which may be used by the G729EV
coder at a specific channel. This parameter is defined
per channel and may vary between the parties. The initial generation
bit rate is the minimum between the MaxBitRate and
the MBS values.
Possible values are:
0 = G729EV_RATE_8_KBPS
1 = G729EV_RATE_12_KBPS
2 = G729EV_RATE_14_KBPS
3 = G729EV_RATE_16_KBPS
4 = G729EV_RATE_18_KBPS
5 = G729EV_RATE_20_KBPS
6 = G729EV_RATE_22_KBPS
7 = G729EV_RATE_24_KBPS
8 = G729EV_RATE_26_KBPS
9 = G729EV_RATE_28_KBPS
10 = G729EV_RATE_30_KBPS
11 = G729EV_RATE_32_KBPS
15 = G729EV_RATE_UNDEFINED.
Access: Online.
AC INI-Param: G729EVLocalMBSrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.20.5 |
acVoiceCoderRateG729EVReceiveMBSDetermines the value of the MBS field of the G729EV frames to
be sent to the other party. This parameter reflects the maximum
bit rate, which the local G729EV supports as a receiver.
Possible values are:
0 = G729EV_RATE_8_KBPS
1 = G729EV_RATE_12_KBPS
2 = G729EV_RATE_14_KBPS
3 = G729EV_RATE_16_KBPS
4 = G729EV_RATE_18_KBPS
5 = G729EV_RATE_20_KBPS
6 = G729EV_RATE_22_KBPS
7 = G729EV_RATE_24_KBPS
8 = G729EV_RATE_26_KBPS
9 = G729EV_RATE_28_KBPS
10 = G729EV_RATE_30_KBPS
11 = G729EV_RATE_32_KBPS
15 = G729EV_RATE_UNDEFINED.
Access: Online.
AC INI-Param: G729EVReceiveMBSrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.20.6 |
acVoiceCoderRateMsRtaForwardErrorCorrectionEnableDetermines the Microsoft RTA coder forward error correction
mode.
0 - Disable.
1 - Enable.
Access: Online.
AC INI-Param: MSRTAForwardErrorCorrectionEnablerw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.1.20.7 |
acVoiceCoderRateMsRtaTxBitRateDetermines the Microsoft RTA coder TX bit rate.
0 - Automatic.
Any value between 8,800 - 29,000.
Access: Online.
AC INI-Param: MSRTATxBitRaterw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.2.1.20.8 |
acVoiceAGC OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.2.2 |
acVoiceAGCEnableActivates the AGC (Automatic Gain Control).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEAGCrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.2.1 |
acVoiceAGCGainSlopeDetermines the AGC (Automatic Gain Control) convergence rate.
Range = 0 to 31 (according to acTAGCGainSlope)
Default = 3 (= 1 db/sec).
Access: Online.
AC INI-Param: AGCGAINSLOPErw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.2.2.2 |
acVoiceAGCRedirectionDetermines the AGC (Automatic Gain Control) direction.
0 = AGC works on signals from the TDM side
1 = AGC works on signals coming from the Network side.
Access: Online.
AC INI-Param: AGCREDIRECTIONrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.2.2.3 |
acVoiceAGCTargetEnergyDetermines the signal energy value [-dBm] that the AGC (Automatic
Gain Control) attempts to attain.
Range = 0 to 63.
Access: Online.
AC INI-Param: AGCTARGETENERGYrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.2.2.4 |
acVoiceAGCMinGainDefines the minimum gain by the AGC when activated [- db].
Range = 0 to -31.
Access: Offline.
AC INI-Param: AGCMINGAINrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.2.2.5 |
acVoiceAGCMaxGainDefines the maximum gain by the AGC when activated [db].
Range = 0 to 18.
Access: Offline.
AC INI-Param: AGCMAXGAINrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.2.2.6 |
acVoiceAGCDisableFastAdaptationDisables the AGC Fast Adaptation mode.
Enable = 1
Disable = 0.
Access: Offline.
AC INI-Param: AGCDISABLEFASTADAPTATIONrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.2.7 |
acVoiceEC OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.2.3 |
acVoiceECEnableEnables or disables the Echo Canceller.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEECHOCANCELLERrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.3.1 |
acVoiceECMaxLengthDefines the maximum board EC (Echo Canceler) length capability.
0 = EC length determined internally to reach maximum channel
capacity.
4 = 32 msec
11 = 64 msec
22 = 128 msec
TP-1610 only:
Using 64 or 128 msec reduces the channel capacity to 200 channels.
.
Access: Offline.
AC INI-Param: MAXECHOCANCELLERLENGTHrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.3.2 |
acVoiceECHybridLossSets the worst case ratio between the signal level transmitted
to the hybrid and the echo level returning from hybrid. Set
this per worst hybrid in the system in terms of echo return
loss. Refer to the enumeration acTECHybridLoss.
0 = 6 dBm
1 = 9 dBm
2 = 0 dBm
3 = 3 dBm.
Access: Online.
AC INI-Param: ECHYBRIDLOSSrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.3.3 |
acVoiceECToneDetectorUsed to configure the Echo Canceler Tone Detector. Detects a
2100 Hz tone at the input signal to the TDM (received signal).
Improves Echo Canceler operation accordingly. Detects 2100,
2100 with phase reversals and 2100 with AM. Improves the
operation of the Echo Canceler by slowing adaptation when the
signal is detected. This data is also used by the fax state
machine.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ECEnableToneDetectorrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.3.4 |
acVoiceECComfortNoiseGenerationUse this parameter to enable or enable Echo Canceler Comfort
Noise Generation, which generates comfort noise when the Non
Linear Processor (NLP) is active.
When the NLP ascertains that the signal is echo and not doubletalk
and decides to clip, instead of transmitting silence
it transmits a synthesized signal similar to the background
noise.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ECEnableComfortNoiseGenerationrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.3.5 |
acVoiceSC OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.2.4 |
acVoiceSCModeEnables or disables Silence Suppression Mode.
0 = Disable = SILENCE_COMPRESION_DISABLE
1 = Enable = SILENCE_COMPRESION_ENABLE
2 = Enable without adaptation = SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLE.
Access: Online.
AC INI-Param: ENABLESILENCECOMPRESSIONrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.2.4.1 |
acVoiceSCVBRCoderDTXMinDefines the minimum number of frames gap between two SID frames,
when using the EVRC voice activity detector.
.
Access: Online.
AC INI-Param: EVRCDTXMinrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.2.4.2 |
acVoiceSCVBRCoderDTXMaxDefines the maximum number of frames gap between two SID frames,
when using the EVRC voice activity detector.
Access: Online.
AC INI-Param: EVRCDTXMaxrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.2.4.3 |
acVoiceSCVBRCoderHangoverFor indicating the desired number of silence frames at the beginning
of each silence period, when using the VBR CODER silence
suppression.
.
Access: Online.
AC INI-Param: VBRCoderHangoverrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.2.4.4 |
acMediaFaxModemConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.3 |
acFaxModem OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.3.1 |
acFMCommon OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.3.1.1 |
acFMCommonRelayVolumeDetermines the fax gain control.
The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps
of 1 dBm.
Access: Online.
AC INI-Param: FAXMODEMRELAYVOLUMErw Integer32 (-18..-3) .1.3.6.1.4.1.5003.9.10.4.1.3.1.1.1 |
acFMCommonV34TransportSets the V.34 modem transport method.
0 = Transparent
2 = Bypass
3 = Transparent with Events
4 = AnsMute.
Access: Online.
AC INI-Param: V34MODEMTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.1.1.2 |
acFMCommonEnableInbandNetworkDetectionEnables or disables inband network detection related to fax/modem.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: EnableFaxModemInbandNetworkDetectionrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.1.1.3 |
acFMBypass OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.3.1.2 |
acFMBypassCoderTypeUsers can use this parameter to set the fax/modem bypass coder
(according to acTCoders).
0 = G.711 A-Law
1 = G.711 Mu-Law.
Access: Online.
AC INI-Param: FAXMODEMBYPASSCODERTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.1.2.1 |
acFMBypassPacketizationPeriodDefines the number of basic frames to generate one RTP fax/modem
bypass packet.
Access: Online.
AC INI-Param: FAXMODEMBYPASSMrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.1.2.2 |
acFMBypassBasicPacketIntervalSets the basic Fax / Modem Bypass RTP packet rate.
0 = Default (set internally) (PACKET_INTERVAL_DEFAULT)
1 = 5 msec (PACKET_INTERVAL_5_MSEC)
2 = 10 msec (PACKET_INTERVAL_10_MSEC)
3 = 20 msec (PACKET_INTERVAL_20_MSEC).
Access: Online.
AC INI-Param: FAXMODEMBYPASSBASICRTPPACKETINTERVALrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.1.2.3 |
acFMBypassDJBufMinDelayDetermines the Jitter Buffer constant delay (in milliseconds)
during a Fax & Modem Bypass session. (The minimum Jitter Buffer
Size).
Range = 0 to 150.
Access: Online.
AC INI-Param: FAXMODEMBYPASDJBUFMINDELAYrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.1.2.4 |
acFMBypassFaxBypassOutputGainDefines the fax bypass output gain control.
Range: -31 dB to +31 dB in 1 dB steps
Default = 0 = No Gain.
Access: Online.
AC INI-Param: FaxBypassOutputGainrw Integer32 (-31..31) .1.3.6.1.4.1.5003.9.10.4.1.3.1.2.5 |
acFMBypassModemBypassOutputGainDefines the modem bypass output gain control.
Range: -31 dB to +31 dB in 1 dB steps
Default = 0 = No Gain.
Access: Online.
AC INI-Param: ModemBypassOutputGainrw Integer32 (-31..31) .1.3.6.1.4.1.5003.9.10.4.1.3.1.2.6 |
acFMNSE OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.3.1.3 |
acFMNSEPayloadTypeUsers can use this parameter to modify the NSE packet's payload
type.
Range = 96 to 127.
Access: Online.
AC INI-Param: NSEPAYLOADTYPErw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.1.3.1 |
acFMNSEModeEnables or disables Cisco's NSE fax / modem automatic pass-through
mode.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: NSEMODErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.1.3.2 |
acFax OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.3.2 |
acFaxTransportModeSets the Fax over IP transport method.
0 = Transparent
1 = Relay
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: FAXTRANSPORTMODErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.2.1 |
acFaxBypassPayloadTypeUsers can use this parameter to modify the Fax Bypass Mode RTP
packet's payload type.
In the case of congestion (if the selected payload type is
already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR
is issued and the payload type is set to the
default value (102).
It is the user's responsibility to avoid congestion with other
payload types.
Range = 0 to 127.
Access: Online.
AC INI-Param: FAXBYPASSPAYLOADTYPErw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.2.2 |
acFaxRelayECMEnableEnables or disables the using of ECM mode during Fax Relay.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: FAXRELAYECMENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.2.3 |
acFaxRelayMaxRateLimits the maximum rate at which fax messages are transmitted.
0 = 2400 bps
1 = 4800 bps
2 = 7200 bps
3 = 9600 bps
4 = 12000 bps
5 = 14400 bps
6 = 16800 bps
7 =19200 bps
8 = 21600 bps
9 = 24000 bps
10 = 26400 bps
11 = 28800 bps
12 = 31200 bps
13 = 33600bps.
Access: Online.
AC INI-Param: FAXRELAYMAXRATErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.2.4 |
acFaxRelayRedundancyDepthDetermines the depth of redundancy for fax packets. This parameter
is applicable only to non-V.21 packets.
0 = No redundancy
1 = 1 packet redundancy
2 = 2 packet redundancy.
Access: Online.
AC INI-Param: FAXRELAYREDUNDANCYDEPTHrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.2.5 |
acFaxEnhancedRelayRedundancyDepthDetermines the number of repetitions to be applied to control
packets when using the T.38 standard.
0 = No redundancy
1 = 1 packet redundancy
2 = 2 packet redundancy
3 = 3 packet redundancy
4 = Maximum redundancy.
Access: Online.
AC INI-Param: FAXRELAYENHANCEDREDUNDANCYDEPTHrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.2.6 |
acFaxCNGDetectorModeDetermines the CNG Detector mode.
0 = Disable
1 = Relay
2 = Event Only.
Access: Online.
AC INI-Param: CNGDETECTORMODErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.2.7 |
acFaxV34TransportMethodDetermines the V.34 fax transport method.
One of the following values:
0 = Transparent
1 = Relay
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V34FAXTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.2.8 |
acFaxT38VersionT38 fax relay version.
0 = T.38 version 0 (from 06/1998)
3 = T.38 version 3 (V.34 over T.38 support)
Default = 3.
Access: Online.
AC INI-Param: T38Versionrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.2.9 |
acModem OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.3.3 |
acModemV22TransportSets the V.22 modem transport method.
0 = Transparent
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V22MODEMTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.3.1 |
acModemV23TransportSets the V.23 modem transport method.
0 = Transparent
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V23MODEMTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.3.2 |
acModemV32TransportSets the V.32 modem transport method.
0 = Transparent
2 = Bypass
3 = Transparent with Events
4 = AnsMute.
Access: Online.
AC INI-Param: V32MODEMTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.3.3 |
acModemBypassPayloadTypeUsers can use this parameter to modify the Modem Bypass Mode
RTP packet's payload type.
In the case of congestion (if the selected payload type is
already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR
is issued and the payload type is set to the
default value (103).
It is the user's responsibility to avoid congestion with other
payload types.
Range = 0 to 127.
Access: Online.
AC INI-Param: MODEMBYPASSPAYLOADTYPErw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.3.4 |
acModemBellTransportTypeUse this parameter to set the Bell modem transport method.
0 = Transparent
2 = Bypass (enum ByPassEnable)
3 = Transparent with Events (enum EventsOnly).
Access: Online.
AC INI-Param: BellModemTransportTyperw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.3.5 |
acModemV21TransportSets the V.21 modem transport method (must be set to 0 = Disable).
0 = Transparent
2 = Bypass
3 = Transparent with Events.
Access: Online.
AC INI-Param: V21ModemTransportTyperwdeprecated Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.3.6 |
acModemEnableV150ModemRelaySupportDetermines whether to enable V.150.1 modem relay support.
Range:
0 - Disable
1 - Enable.
Access: Offline.
AC INI-Param: EnableV150ModemRelaySupportrwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.4.1.3.3.7 |
acV150dot1 OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.3.4 |
acV150dot1AllocationProfileSelects the V.150.1 profile, determining how many DSP channels
have V.150.1 support.
Range = 0 to 3.
Access: Offline.
AC INI-Param: V1501AllocationProfilerw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.4.1 |
acV150dot1SSEPayloadTypeRxSSE payload type RX.
Access: Online.
AC INI-Param: V1501SSEPayloadTypeRxrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.4.2 |
acV150dot1SSEPayloadTypeTxSSE payload type TX.
Access: Online.
AC INI-Param: V1501SSEPayloadTypeTxrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.4.3 |
acV150dot1SSERedundancyDepthSSE is a part of V150.1 modem relay protocol and SSE messages
are sent over RTP.
SSE redundancy refers to the sending of SSE messages several
times to increase reliability. This parameter determines the
number of times each SSE message is to be resent.
Access: Online.
AC INI-Param: V1501SSERedundancyDepthrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.4.4 |
acV150dot1SPRTPayloadTypeRxSPRT payload type RX.
Access: Online.
AC INI-Param: V1501SPRTPayloadTypeRxrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.4.5 |
acV150dot1SPRTPayloadTypeTxSPRT payload type TX.
Access: Online.
AC INI-Param: V1501SPRTPayloadTypeTxrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.4.6 |
acV150dot1SPRTTransportChannel0MaxPayloadSizeSPRT transport channel 0 max payload size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel0MaxPayloadSizerw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.4.7 |
acV150dot1SPRTTransportChannel2MaxPayloadSizeSPRT transport channel 2 max payload size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel2MaxPayloadSizerw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.4.8 |
acV150dot1SPRTTransportChannel2MaxWindowSizeSPRT transport channel 2 max window size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel2MaxWindowSizerw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.4.9 |
acV150dot1SPRTTransportChannel3MaxPayloadSizeSPRT transport channel 3 max payload size.
Access: Online.
AC INI-Param: V1501SPRTTransportChannel3MaxPayloadSizerw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.3.4.10 |
acMediaRtpRtcpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.4 |
acRtpRtcp OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.4.1 |
acRtpRtcpBrokenConnectionEventTimeoutDetermines for how long the RTP connection should be broken
before the Broken Connection event is issued. In units of 100
msec.
.
Access: Online.
AC INI-Param: BROKENCONNECTIONEVENTTIMEOUTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.1.1 |
acRtpRtcpBrokenConnectionEventActivationModeDetermines if the broken connection mechanism is activated when
the RTP stream is activated or when the first RTP packet
is received.
0 = After First incoming packet (default)
1 = Upon channel's RTP activation.
.
Access: Online.
AC INI-Param: BROKENCONNECTIONEVENTACTIVATIONMODErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.1.2 |
acRtpRtcpBasicRTPPacketIntervalSelects the RTP packet rate for sample based coders (such as
G.711, G.726, G.727). Also applicable for G.729, G.729E & G.728.
0 = Default (set internally)
1 = 5 msec
2 = 10 msec
3 = 20 msec.
Access: Online.
AC INI-Param: BASICRTPPACKETINTERVALrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.1.3 |
acRtpRtcpConnectionEstablishNotificationModeDetermines the notification mode for the RTP connection establishment
event acEV_CONNECTION_ESTABLISHED.
0 = Notify only after a broken connection event
1 = Also notify when the first RTP packet is received.
Access: Online.
AC INI-Param: CONNECTIONESTABLISHEMENTNOTIFICATIONMODErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.1.4 |
acRtpRtcpEnableMediaUDPChecksumDetermines whether to enable the UDP checksum calculation for
RTP media TX over IPv4. One of the following possible values:
0 = Disable (No checksum: UDP checksum for IPv4 TX = 0)
1 = Enable (UDP checksum will be in the UDP header upon IPv4
TX)
.
Access: Offline.
AC INI-Param: EnableMediaUDPChecksumrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.1.5 |
acRtp OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.4.2 |
acRtpBaseUDPPortDefines the lower boundary of UDP ports to be used by the board.
The upper boundary is calculated on the basis of BoardBaseUDPPort
+ 10 * (Number of Channels). This parameter value
must be a multiple of 10.
.
Access: Offline.
AC INI-Param: BASEUDPPORTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.1 |
acRtpComfortNoiseEnableWhen set to 1 (Enable), SID packets are sent with the RTP SID
type (RFC 3389).
0 = Disable
1 = Enable
Determines whether Silence Indicator (SID) packets that are
sent and received are according to RFC 3389.
0 = Disabled (default).
1 = Enabled.
Note: Applicable only to MP-11x and Mediant 1000.
.
Access: Online.
AC INI-Param: ENABLESTANDARDSIDPAYLOADTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.2.2 |
acRtpEnableRFC2658InterleavingWhen enabled, RTP packets include an interleaving byte for VBR
coders.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLERFC2658INTERLEAVINGrwobsolete Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.2.3 |
acRtpRxTxModeSelects which RTP directions are enabled. Both Tx and Rx sides
can be disabled.
0 = RTPTxRx
1 = RTPTxOnly
2 = RTPRxOnly
3 = RTPUnactive
4 = RTPRxRFC2833Tx.
Access: Online.
AC INI-Param: RTPDIRECTIONCONTROLrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.2.4 |
acRtpRFC2833TxPayloadTypeControls the RFC 2833 Tx Relay RTP Payload type.
Range = 96 to 127.
Access: Online.
AC INI-Param: RFC2833TXPAYLOADTYPErw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.5 |
acRtpRFC2833RxPayloadTypeControls the RFC 2833 Rx Relay RTP Payload type.
Range = 96 to 127.
Access: Online.
AC INI-Param: RFC2833RXPAYLOADTYPErw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.6 |
acRtpRedundancyPayloadTypeThis parameter sets the RFC 2198 (RTP Redundancy) packet's parameter
'RTP Payload Type'.
Range: 96 to 127.
Access: Online.
AC INI-Param: RFC2198PAYLOADTYPErw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.7 |
acRtpRedundancyDepthRedundancy depth of RFC 2198 redundancy packets.
0 = No redundancy
1 = Redundacny depth.
Access: Online.
AC INI-Param: RTPREDUNDANCYDEPTHrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.2.8 |
acRtpPacketizationFactorDefines the number of DSP payloads for generating one RTP packet.
Range = Hardware dependent.
Access: Online.
AC INI-Param: RTPPACKINGFACTORrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.9 |
acRtpNoOpPayloadTypeUser can modify the Noop packets RTP Payload type by setting
this parameter.
Range = 96 to 127.
Access: Online.
AC INI-Param: RTPNOOPPAYLOADTYPErw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.10 |
acRtpNoOpEnableEnables / disable Noop packets sending mode.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: RTPNOOPENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.2.11 |
acRtpNoOpIntervalUsed to modify the Noop packets sending interval
Parameter value is in milliseconds
Default value = 10 sec (10000 msec)
Range = 20 to 600000
(20 msec to 10 min - 10 min = 600000).
Access: Online.
AC INI-Param: RTPNOOPINTERVALrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.12 |
acRtpVBRCoderHeaderFormat0 - payload only (no header, no toc, no m-factor)
1- support RFC 2658 format, 1 byte for interleaving header
(always 0) and toc, no m-factor
2- payload including toc only, allow m-factor
3- RFC 3358 format
.
Access: Online.
AC INI-Param: VBRCoderHeaderFormatrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.2.13 |
acRtpAMRCoderHeaderFormatAMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame
contains CRM byte and toc
RFC_3267_BUNDLING=1 - single CRM byte followed by toc tables
RFC_3267_INTERLEAVING=2 - supported as receivers only.
Access: Online.
AC INI-Param: AMRCODERHEADERFORMATrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.2.14 |
acRtpAMRFECRedundancyDepthSets the AMR / WB-AMR Redundancy depth according to RFC 3267.
0 = No Redundancy
1 = Redundancy depth of a single packet
2 = Redundancy depth of 2 packets
3 = Redundancy depth of 3 packets
.
Access: Online.
AC INI-Param: AMRFECREDUNDANCYDEPTHrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.2.15 |
acRtpAMRFECNumOfMngtPolicyEntriesSets the number of entries to be defined at the AMR management
policy table. Each entry defines the policy of a different
rate.
Access: Online.
AC INI-Param: AMRFECNUMBEROFCODECMODESrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.16 |
acRtpAMRFECDelayHysteresisDefines the hysteresis of the Delay Threshold for AMR Hand-out
events (in msec).
Access: Online.
AC INI-Param: AMRFECDELAYHYSTERESISrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.17 |
acRtpAMRFECDelayThresholdDefines the one-way delay value (in msec) that may cause the
AMR Hand Out report.
0 = 'Hand Out' report is disabled (default).
Access: Online.
AC INI-Param: AMRFECDELAYTHRESHHOLDrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.18 |
acRtpQcelpCoderHeaderFormatDetermines whether to define a separate header format for the
QCELP coder (different to the header format of EVRC coder).
One of the following values:
-1 - QCELP coder uses the same header format as EVRC
coder,
according to VBRCoderHeaderFormat parameter.
1 to 2 - QCELP coder uses the value defined by this parameter
to
define its header format.
This parameter is relevant only for Control Protocol users.
TPNCP and PCI users should always use -1 value.
Access: Instant.
AC INI-Param: QcelpCoderHeaderFormatrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.2.19 |
acAMRFECCodecPolicies OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.4.2.21 |
acAMRFECCodecPoliciesTable SEQUENCE OF AcAMRFECCodecPoliciesEntry .1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1 |
acAMRFECCodecPoliciesEntry AcAMRFECCodecPoliciesEntry .1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1 |
acAMRFECCodecPoliciesIndexAC INI-Param: AMRFECCodecPolicies_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.1 |
acAMRFECCodecPoliciesRowStatusAC INI-Param: N/Arw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.2 |
acAMRFECCodecPoliciesRateAMR Rate x of policy x (values 0-8).
Access: Offline.
AC INI-Param: AMRFECCodecPolicies_Raterw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.3 |
acAMRFECCodecPoliciesRedundancyLevelRedundancy Level for policy x. Same values as 'RFC 3267 Redundancy'
field.
Access: Offline.
AC INI-Param: AMRFECCodecPolicies_RedundancyLevelrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.4 |
acAMRFECCodecPoliciesThresholdFLR (Frame Loss Ratio) threshold of policy 1. Values are taken
from 3GPP TS 44.318 (0-63).
Access: Offline.
AC INI-Param: AMRFECCodecPolicies_Thresholdrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.5 |
acAMRFECCodecPoliciesHysteresisHysteresis of FLR threshold for policy 1. Values are taken from
3GPP TS 44.318. (0-15).
Access: Offline.
AC INI-Param: AMRFECCodecPolicies_Hysteresisrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.6 |
acRtcp OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.4.3 |
acRtcpDisableIntervalRandomizationControls whether RTCP report intervals are randomized or whether
each report interval accords exactly to the parameter defining
RTCP Mean Tx Interval (in milliseconds).
0 = Randomize
1 = Don't Randomize.
Access: Online.
AC INI-Param: DISABLERTCPRANDOMIZErw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.3.1 |
acRtcpXr OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.4.4 |
acRtcpXrBurstThresholdvoice quality monitoring - excessive burst alert threshold.
if set to -1, no alerts will be issued.
Access: Online.
AC INI-Param: VQMONBURSTHRrw Integer32 (-1..12) .1.3.6.1.4.1.5003.9.10.4.1.4.4.1 |
acRtcpXrDelayThresholdvoice quality monitoring - excessive delay alert threshold.
if set to -1, no alerts will be issued.
Access: Online.
AC INI-Param: VQMONDELAYTHRrw Integer32 (-1..12) .1.3.6.1.4.1.5003.9.10.4.1.4.4.2 |
acRtcpXrEndOofCallRvalDelayThresholdvoice quality monitoring - end of call low quality alert threshold.
if set to -1, no alerts will be issued.
Access: Online.
AC INI-Param: VQMONEOCRVALTHRrw Integer32 (-1..12) .1.3.6.1.4.1.5003.9.10.4.1.4.4.3 |
acRtcpXrGMinvoice quality monitoring - minimum gap size (number of frames).
Access: Online.
AC INI-Param: VQMONGMINrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.4.4 |
acRtcpXrEnableEnable voice quality monitoring and RTCP xr reports.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: VQMONENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.4.5 |
acVideoRtpRtcp OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.4.5 |
acVideoRtpRtcpDisableRtcpIntervalRandomizationDetermines whether to enable RTCP Interval Randomization. One
of the following values: 0 Enable RTCP Interval Randomization
1 Disable RTCP Interval Randomization
.
Access: Online.
AC INI-Param: VideoDisableRtcpIntervalRandomizationrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.5.1 |
acVideoRtpRtcpMeanTxIntervalDefines the mean interval between two transmitted RTCP packets
(milliseconds). If the interval is set to 0, no RTCP packets
are transmitted at all.
Access: Online.
AC INI-Param: VideoRtcpMeanTxIntervalrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.5.2 |
acVideoRtpRtcpBrokenConnectionActivationModeBroken connection event activation mode.
0 - Activate broken connection after the arrival of the first
RTP packet.
1 - Activate broken connection immediately after the Activate
RTP command.
.
Access: Online.
AC INI-Param: VideoBrokenConnectionActivationModerw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.4.5.3 |
acVideoRtpRtcpBrokenConnectionEventTimeoutTimeout that defines when broken connection event occurs.
Time resolution is 20msec.
Access: Online.
AC INI-Param: VideoBrokenConnectionEventTimeoutrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.4.5.4 |
acMediaIBSConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.5 |
acIBS OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.5.1 |
acIBSAnalogSignalTransportTypeDetermines the analog signal transport type.
0 = Ignore
1 = Transfer hookflash via RFC 2833.
Access: Online.
AC INI-Param: ANALOGSIGNALTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.1.1 |
acIBSDTMFVolumeDefines and controls the DTMF generation volume [-dBm].
Range = -31 to 0.
Access: Online.
AC INI-Param: DTMFVOLUMErw Integer32 (-31..0) .1.3.6.1.4.1.5003.9.10.4.1.5.1.2 |
acIBSDTMFTransportTypeDefines the type of DTMF transport.
0 = Erase DTMFs from voice transport not relayed to remote
2 = DTMFs not erased are not relayed to remote
3 = DTMFs are muted from the voice stream and relayed according
to RFC 2833
7 = DTMFs are sent according to RFC 2833 and muted when received.
Access: Online.
AC INI-Param: DTMFTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.1.3 |
acIBSMFTransportTypeDefines the type of MF transport.
0 = Erase MFs from voice transport not relayed to remote
2 = MFs not erased are not relayed to remote
3 = MFs are muted from the voice stream and relayed according
to RFC 2833.
Access: Online.
AC INI-Param: MFTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.1.4 |
acIBSTrunkTestingTonesEnableEnables or disables trunk testing tones.
0 = Disables trunk testing tones
1 = Enables trunk testing tones.
Access: Offline.
AC INI-Param: ENABLETRUNKTESTINGTONESrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.1.5 |
acIBSCASRelayTransportModeControls the ABCD signaling transport type over IP.
0 = No Relay over the network
1 = Enable CAS relay according to RFC 2833.
Access: Online.
AC INI-Param: CASTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.1.6 |
acIBSRxDtmfHangOverTimeUsed to configure the Voice Silence time (in ms units) after
playing DTMF or MF digits to the TDM side that arrived as Relay
from the Network side.
Range from 0 to 2000, Default 1000.
Access: Online.
AC INI-Param: RxDtmfHangOverTimerw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.5.1.7 |
acIBSTxDtmfHangOverTimeVoice Silence time (in ms units) after detecting the end of
DTMF or MF digits at the TDM side when the DTMF Transport Type
is either Relay or Mute.This feature allows the user to configure
the silence time.
.
Access: Online.
AC INI-Param: TxDtmfHangOverTimerw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.5.1.8 |
acIBSDTMFTwistControlDefines a delta (in dB) between the high and low frequency component
in the DTMF signal. dB Positive values cause the higher
frequency component to be stronger than the lower one.
Negative values cause the opposite effect. For any parameter
value, both components change so that their average is constant.
Range = -10 to 10.
Access: Offline.
AC INI-Param: DTMFGenerationTwistrw Integer32 (-10..10) .1.3.6.1.4.1.5003.9.10.4.1.5.1.9 |
acIBSNTEMaxDurationMaximal time for sending NTEs (Named Telephony Events) to the
network, regardless of the time range when the TDM signal
is detected.
-1= NTE will stop only upon detection of End event (default).
Access: Online.
AC INI-Param: NTEMaxDurationrw Integer32 (-1..200000000) .1.3.6.1.4.1.5003.9.10.4.1.5.1.10 |
acIBSDetectors OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.5.2 |
acIBSDetectorsMFR1EnableEnables or disables detection of MFR1 signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: MFR1DETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.1 |
acIBSDetectorsMFR2ForwardEnableEnables or disables detection of MFR2 forward signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: MFR2FORWARDDETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.2 |
acIBSDetectorsMFR2BackwardEnableEnables or disables detection of MFR2 backward signaling.
Access: Online.
AC INI-Param: MFR2BACKWARDDETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.3 |
acIBSDetectorsR1LineEnableEnables or disables detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: R1LINEDETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.4 |
acIBSDetectorsR2LineEnableEnables or disables detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: R2LINEDETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.5 |
acIBSDetectorsAC15EnableEnables or disables detection of Line signaling.
Access: Online.
AC INI-Param: AC15DETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.6 |
acIBSDetectorsDTMFEnableEnables or disables detection of DTMF signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: DTMFDETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.7 |
acIBSDetectorsCallProgressEnableEnables or disables detection of Call Progress Tones.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: CALLPROGRESSDETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.8 |
acIBSDetectorsUserDefinedToneEnableEnables or disables detection of User Defined Tones signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: USERDEFINEDTONEDETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.9 |
acIBSDetectorsDetectionRedirectionDetermines the IBS (In-Band Signaling) Detection Direction.
0 = PCM
1 = Network.
Access: Online.
AC INI-Param: IBSDETECTIONREDIRECTIONrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.10 |
acIBSDetectorsSS4EnableEnables or disables detection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: SS4DETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.11 |
acIBSDetectorsMFSS5EnableEnables or disables detection of MF SS5 line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: MFSS5DETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.12 |
acIBSDetectorsSS5EnableDetection of Line signaling.
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: SS5DETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.13 |
acIBSDetectorsSITEnableEnables or disables SIT (Special Information Tone) detection
according to the ITU-T recommendation E.180/Q.35.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: SITDETECTORENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.14 |
acIBSDetectorsCOTEnableEnables or disables Continuity Test tone detection and generation
according to the ITU-T Q.724 recommendation.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: ENABLECONTINUITYTONESrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.15 |
acIBSDetectorsR1DetectionStandardThis parameter determines which one of the R1 MF protocol flavors
will be used for detection.
0 = ITU
1 = R1.5.
Access: Offline.
AC INI-Param: R1DetectionStandardrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.5.2.16 |
acIBSDetectorsUDTDetectorFrequencyDeviationDefines the deviation allowed for the detection of each signal
frequency. Units are in Hertz.
Valid values range 1-50.
Default value 50 Hz.
.
Access: Offline.
AC INI-Param: UDTDETECTORFREQUENCYDEVIATIONrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.5.2.17 |
acIBSDetectorsCPTDetectorFrequencyDeviationDefines the deviation allowed for the detection of each CPT
signal frequency. Units are in Hertz.
Valid values range 1-30.
Default value 10 Hz.
.
Access: Offline.
AC INI-Param: CPTDETECTORFREQUENCYDEVIATIONrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.5.2.18 |
acIPMediaConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.6 |
acIPMedia OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.6.1 |
acIPMediaDSPDetectorsEnableEnables or disables DSP IP Media Detectors. Enabling this parameter
might reduce the board channel capacity.
0 = Disable
1 = Enable.
Access: Offline.
AC INI-Param: ENABLEDSPIPMDETECTORSrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.1.1 |
acIPMAnswerDetector OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.6.2 |
acIPMAnswerDetectorEnableEnables or disables activation of the AD (Answer Detector).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEANSWERDETECTORrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.2.1 |
acIPMAnswerDetectorActivityDelayControls (in 100 msec resolution) the time between sending Activation
command (AnswerDetector = 1) and the time that the
detector actually starts to work.
Range = 0 to 0x3FF.
Access: Online.
AC INI-Param: ANSWERDETECTORACTIVITYDELAYrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.2.2 |
acIPMAnswerDetectorSilenceTimeThis parameter controls the silence time period (in 100 msec
resolution) from no speech input until the END_OF_SPEECH event
is sent.
10 = 1 second
Range = 0 to 0x3FF.
Access: Online.
AC INI-Param: ANSWERDETECTORSILENCETIMErw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.2.3 |
acIPMAnswerDetectorRedirectionDetermines the AD (Answer Detector) Redirection.
0 (PCM) = Speech from the PCM side is detected
1 (Network) = Speech from the IP side is detected.
Access: Online.
AC INI-Param: ANSWERDETECTORREDIRECTIONrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.2.4 |
acIPMAnswerDetectorSensitivityControls the AD (Answer Detector) sensitivity.
The allowed values are different for different boards:
DSP Gen2-based products: range 0 - 2, default 0.
DSP Gen2-based products: range 0 - 7, default 3.
Lowest value matches highest sensitivity and vice versa.
Access: Online.
AC INI-Param: ANSWERDETECTORSENSITIVITYrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.2.5 |
acIPMEnergyDetector OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.6.3 |
acIPMEnergyDetectorEnableActivates the ED (Energy Detector).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEENERGYDETECTORrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.3.1 |
acIPMEnergyDetectorQualityFactorDetermines the ED's (Energy Detector's) sensitivity (0 -10).
0 = Insensitive
10 = Most Sensitive
Range = 0 to 10.
Access: Online.
AC INI-Param: ENERGYDETECTORQUALITYFACTORrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.3.2 |
acIPMEnergyDetectorThresholdDefines the ED's (Energy Detector's) threshold. A signal exceeding
the threshold invokes an 'Above' or 'Below' event.
ActualThreshold = -44 dBm + (EDThreshold * 6)
Default = 3 = -26 dBm
Range: 0 to 7.
Access: Online.
AC INI-Param: ENERGYDETECTORTHRESHOLDrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.3.3 |
acIPMEnergyDetectorEnergyRedirectionSelects the direction of the energy detection.
0 = Detect from the TDM side
1 = Detect from the network side.
Access: Online.
AC INI-Param: ENERGYDETECTORREDIRECTIONrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.3.4 |
acIPMediaPatternDetector OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.6.4 |
acIPMediaPatternDetectorEnableEnables or disables activation of the PD (Pattern Detector).
0 = Disable
1 = Enable.
Access: Online.
AC INI-Param: ENABLEPATTERNDETECTORrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.4.1 |
acIPMediaPatternDetectorDetectionThresholdDefines the number of consecutive patterns to trigger the pattern
detection event.
Range = 0 to 31.
Access: Offline.
AC INI-Param: PDTHRESHOLDrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.4.2 |
acIPMediaAMD OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.6.5 |
acIPMediaAMDDetectionDirectionDetermines the AMD (Answer Machine Detector) detection direction.
One of the following values:
0 = Detection from the TDM side
1 = Detection from the Network side.
Access: Online.
AC INI-Param: AMDDETECTIONDIRECTIONrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.5.1 |
acIPMediaAMDSensitivityDetermines the AMD (Answer Machine Detector) detection sensitivity:
0 = Best detection of an answering machine
7 = Best detection of a live call.
Access: Online.
AC INI-Param: AMDDetectionSensitivityrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.5.2 |
acIPMediaAMDDetectionSensitivityHighResolutionDetermines the AMD (Answer Machine Detector) high resolution
detection sensitivity.
The high resolution has 16 levels of sensitivity while the
normal resolution (Answer Machine Detector Sensitivity) has
8 levels.
0 = Best detection of an answering machine
15 = Best detection of a live call.
Access: Online.
AC INI-Param: AMDDetectionSensitivityHighResolutionrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.5.3 |
acIPMediaAMDSensitivityResolutionDetermines the AMD (Answer Machine Detector) detection sensitivity
resolution:
0 = Normal detection sensitivity resolution (8 sensitivity
levels)
1 = High detection sensitivity resolution (16 sensitivity levels).
Access: Online.
AC INI-Param: AMDSensitivityResolutionrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.5.4 |
acIPMediaAMDBeepDetectionTimeoutDetermines the AMD (Answer Machine Detector) Beep detection
timeout.
Units of 100 milliseconds, values from 0 to 1638 (163.8 seconds).
Access: Online.
AC INI-Param: AMDBeepDetectionTimeoutrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.5.5 |
acIPMediaAMDBeepDetectionSensitivityDetermines the AMD (Answer Machine Detector) Beep detection
sensitivity.
0 - Least sensitive.
3 - Most sensitive.
Access: Online.
AC INI-Param: AMDBeepDetectionSensitivityrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.5.6 |
acIPMConference OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.6.6 |
acIPMConferenceGASNMinIntervalMinimum interval between Active Speaker Notification (ASN) events.
An ASN event reports on the active speakers in a conference.
The event is issued whenever the active speakers change.
units = 100 ms
Minimum configurable interval between events is 500 ms (5 units).
Access: Instant.
AC INI-Param: ACTIVESPEAKERSNOTIFICATIONMININTERVALrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.6.1 |
acIPMConferenceEnergythresholdConference - Minimum energy level for a user to be included
in Active Speaker Notification (ASN) events (units: -dBm).
Valid range 0 to (-39) dbm.
Access: Instant.
AC INI-Param: ActiveSpeakerEnergyThresholdrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.6.2 |
acIPMConferenceEnableHDConferenceEnable\Disable HD Conference.
Access: Offline.
AC INI-Param: EnableHDConferencerw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.6.3 |
acIPMVideoConference OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.6.7 |
acIPMVideoConferenceSwitchingIntervalDetermines the video view rotation interval in seconds. Applicable
when using timer trigger switching mode.
Access: Online.
AC INI-Param: VideoConferenceSwitchingIntervalrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.6.7.1 |
acIPMVideoConferenceEnableActiveSpeakerHighlightHighlights the speaker for participants viewing a symmetric
layout (2x2 or 3x3) .
0 - Don't highlight active speaker.
1 - Highlight active speaker.
Access: Online.
AC INI-Param: VideoEnableActiveSpeakerHighlightrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.7.2 |
acIPMVideoConferenceParticipantTypeIndicates a participant's capabilities in the conference.
Regular (2) - Regular participant who is able to both send
and receive video.
.
Access: Online.
AC INI-Param: VideoConferenceParticipantTyperw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.7.3 |
acIPMVideoConferenceParticipantTriggerModeParticipant trigger mode defines the trigger for modifying the
participant's view.
Voice Activated Video Switch (0) - A participant's view will
be changed according to the active speakers' detection.
Timer (1) - A participant's view is rotated every configured
time among the different video participants in the conference.
Fixed (3) - A participant's view is fixed.
.
Access: Online.
AC INI-Param: VideoConferenceParticipantTriggerModerw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.7.4 |
acIPMVideoConferenceParticipantLayoutIndicates the participant's view layout.
1 user (0).
2*2 users (1). All same size.
3*3 users (2). All same size.
.
Access: Online.
AC INI-Param: VideoConferenceParticipantLayoutrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.7.5 |
acIPMVideoConferenceEnableConferenceParticipantSelfViewSelf view indication.
0 - The participant cannot view himself
1 - The participant can view himself.
Access: Online.
AC INI-Param: VideoEnableConferenceParticipantSelfViewrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.6.7.6 |
acMediaCallerIDConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.7 |
acCallerID OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.7.1 |
acCallerIDTypesDefines the supported Caller ID standard.
0 = Bellcore
1 = ETSI
2 = NTT
4 = British
16 = ETSI_ETS
17 = Denmark
18 = Indian
19 = Brazilian.
Access: Online.
AC INI-Param: CALLERIDTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.7.1.1 |
acCallerIDTransportTypeDefines the CallerID Transport type.
0 = Disable
1 = Relay
3 = Mute.
Access: Online.
AC INI-Param: CallerIDTransportTyperw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.7.1.2 |
acCallerIDDTMFBasedMaxDigitsDetermines the maximum number of DTMF digits in a DTMF-based
Caller ID string.
Range = 0 to 26.
Access: Online.
AC INI-Param: MAXDTMFDIGITSINCIDSTRINGrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.7.1.3 |
acCallerIDDTMFBasedMinDigitsDetermines the mimumum number of DTMF digits in a DTMF-based
Caller ID string.
Range = 0 to 26.
Access: Online.
AC INI-Param: MINDTMFDIGITSINCIDSTRINGrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.7.1.4 |
acCallerIDNTTDIDSignallingFormConfigures the signalling format used when generating an NTT
DID.
0 = FSK Siganl
1 = DTMF Based Signal.
Access: Online.
AC INI-Param: NTTDIDSignallingFormrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.7.1.5 |
acMediaNetworkConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.8 |
acMediaNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.8.1 |
acMediaNetworkDisableNATEnables or disables the NAT feature.
0 = Do not disable NAT
1 = Disable NAT.
Access: Online.
AC INI-Param: DISABLENATrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.8.1.1 |
acMediaNetworkRtpIpTosSets value of IP Type Of Service field in IP header for all
packets generated from this channel. Follow the acTIPTOS enumeration.
Access: Instant.
AC INI-Param: IPTOSrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.8.1.2 |
acMediaNetworkRtpIpPrecedenceSets value of the IP precedence field in the IP header for all
packets generated from this channel. Follow the acTIPPrecedence
enumeration.
Access: Instant.
AC INI-Param: IPPRECEDENCErwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.8.1.3 |
acMediaNetworkIPDiffServDefines the value of the 'DiffServ' field in the IP header for
media (RTP) traffic.
Range: 0 to 63.
Access: Instant.
AC INI-Param: IPDIFFSERVrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.8.1.4 |
acMediaNetworkInboundLatchModeDetermines the way of handling incoming media packets from
non-expected address/port.
Access: Online.
AC INI-Param: InboundMediaLatchModerw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.8.1.5 |
acMediaJBConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.9 |
acJitterBuffer OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.9.1 |
acJitterBufferMinDelayDefines the Dynamic Jitter Buffer Minimum Delay (in msec).
Recommended value for a regular voice call is 10.
Access: Online.
AC INI-Param: DJBUFMINDELAYrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.9.1.1 |
acJitterBufferOptFactorDefines the Dynamic Jitter Buffer frame error/delay optimization.
Recommended value for a regular voice call is 10.
Access: Online.
AC INI-Param: DJBUFOPTFACTORrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.9.1.2 |
acVideoJitterBuffer OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.9.2 |
acVideoJitterBufferMinDelayJitter buffer minimum delay in milliseconds. Must be less than
JitterBufferMaxDelay.
Access: Online.
AC INI-Param: VideoJitterBufferMinDelayrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.9.2.1 |
acVideoJitterBufferMaxDelayJitter buffer maximum delay in milliseconds.
Access: Online.
AC INI-Param: VideoJitterBufferMaxDelayrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.9.2.2 |
acVideoJitterBufferDJBOptimizationFactorJB Optimization Factor controls the jitter buffer's adaptation
rates
A High factor means fast adaptation when jitter increases,
and a slow adaptation when jitter decrease.
Small factor means slow adaptation when jitter increases, and
a fast adaptation when jitter decreases.
.
Access: Online.
AC INI-Param: VideoDJBOptimizationFactorrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.9.2.3 |
acMediaAggregation OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.10 |
acMediaAggregationRemoteBaseUDPPortRemote Base UDP Port For Aggrigation.
Access: Offline.
AC INI-Param: REMOTEBASEUDPPORTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.10.1 |
acMediaAggregationL1L1ComplexRxUDPPortThe UDP port for the incoming (from the remote side) and the
outgoing (destination UDP) packets, for Complex Multiplexed
RTP mode.
Access: Offline.
AC INI-Param: L1L1ComplexRxUDPPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.10.2 |
acMediaAggregationL1L1ComplexTxUDPPortThe Source UDP port for the outgoing UDP Multiplexed RTP packets,
for Complex-Multiplex RTP mode.
Access: Offline.
AC INI-Param: L1L1ComplexTxUDPPortrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.10.3 |
acStreamingCache OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.11 |
acStreamingCacheSizeSets the streaming cache size in MBs.
The remaining size (out of 32MBs) is used as VoicePrompt storage.
Access: Offline.
AC INI-Param: gStreamingCacheSizerw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.11.1 |
acStreamingCacheRefreshTimeDefines the streaming cache data refresh time in minutes. If
-1 is set, refresh is off.
Access: Offline.
AC INI-Param: gStreamingCacheRefreshTimerw Integer32 (-1..65535) .1.3.6.1.4.1.5003.9.10.4.1.11.2 |
acStreamingCacheClearServicereset the streaming cache.
Access: Instant.
AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.11.3 |
acMediaVideoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.12 |
acMediaVideoConfigEncoderIntraIntervalSets the frequency for the number of frames at which the encoder
outputs an Intra frame.
Access: Online.
AC INI-Param: VideoEncoderIntraIntervalrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.12.1 |
acMediaVideoConfigMaxPacketSizeSets the maximum packet size in bytes.
Access: Online.
AC INI-Param: VideoMaxPacketSizerw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.12.2 |
acMediaVideoConfigTargetBitrateSets the target output bit rate.
Access: Online.
AC INI-Param: VideoTargetBitraterw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.12.3 |
acMediaVideoConfigQualityParameterForRateControlThis value determines the trade off between video quality and
frame rate. A low value indicates a higher quality with a
lower frame rate and vice versa.
Access: Online.
AC INI-Param: VideoQualityParameterForRateControlrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.12.4 |
acMediaVideoConfigRateControlTypeSets bitrate output to either a constant or a variable bit rate.
CBR (0) - Constant Bit Rate.
VBR (1) - Variable Bit Rate. Target Bitrate indicates the target
average output bit rate.
.
Access: Online.
AC INI-Param: VideoRateControlTyperw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.12.5 |
acMediaVideoConfigEnableReSyncHeaderIndicates whether to add a video packet header to every packet
in order to increase error resilience.
0 - Disable
1 - Enable.
Access: Online.
AC INI-Param: VideoEnableReSyncHeaderrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.12.6 |
acMediaVideoConfigEnableAudioVideoSynchronizationDetermines whether to enable audio and video synchronization.
0 - No synchronization between audio and video streams
1 - Synchronization between audio and video streams
.
Access: Online.
AC INI-Param: EnableAudioVideoSynchronizationrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.12.7 |
acIPMediaChannels OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.1.13 |
acIPMediaChannelsEnableWhether to enable DSP channels reservation for IPmedia support.
Relevant for Mediant 1000 board only. One of the following
possible
0 = Disable
1 - Enable.
Access: Offline.
AC INI-Param: EnableIPMediaChannelsrw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.13.1 |
acIPMediaChannelsResourcesTableIPMedia channels info SEQUENCE OF AcIPMediaChannelsResourcesEntry .1.3.6.1.4.1.5003.9.10.4.1.13.21 |
acIPMediaChannelsResourcesEntry AcIPMediaChannelsResourcesEntry .1.3.6.1.4.1.5003.9.10.4.1.13.21.1 |
acIPMediaChannelsResourcesIndexIndex Field for line. Internal parameter.
AC INI-Param: IPMediaChannels_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.13.21.1.1 |
acIPMediaChannelsResourcesRowStatusROWSTATUS field for line. Internal parameter.
AC INI-Param: N/Arw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.4.1.13.21.1.2 |
acIPMediaChannelsResourcesActionMangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.4.1.13.21.1.3 |
acIPMediaChannelsResourcesActionResMangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.4.1.13.21.1.4 |
acIPMediaChannelsResourcesModuleIDRefers to M1K board only, module at which slot.
Access: Offline.
AC INI-Param: IPMediaChannels_ModuleIDrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.13.21.1.5 |
acIPMediaChannelsResourcesDSPChannelsReservedHow many DSP channels reserve for IPMedia channels.
Access: Offline.
AC INI-Param: IPMediaChannels_DSPChannelsReservedrw Unsigned32 .1.3.6.1.4.1.5003.9.10.4.1.13.21.1.6 |
acMediaStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.2 |
acIPLegs OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.4.2.1 |
acIPLegsTable SEQUENCE OF AcIPLegsEntry .1.3.6.1.4.1.5003.9.10.4.2.1.1 |
acIPLegsEntry AcIPLegsEntry .1.3.6.1.4.1.5003.9.10.4.2.1.1.1 |
acIPLegsLegIndexDescribes Rtp Endpoint In A Specific Call.
AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.1 |
acIPLegsCallIndexDecribes The Call which The Rtp EndPoint Participant In It.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.2 |
acIPLegsRTPActiveDecribes whether the RTP is active or not.
AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.3 |
acIPLegsCoderTypedescribes the coder Type.
AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.4 |
acIPLegsSilenceCompressionEnables or Disables the Silence Compression.
AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.5 |
acIPLegsDTMFDetectionEnables or Disables the DTMF Detection.
AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.6 |
acIPLegsLocalRTPPortDescribes the RTP port of the Leg.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.7 |
acIPLegsRemoteRTPAddressDescribes the RTP address.
AC INI-Param: N/Aro IpAddress .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.8 |
acIPLegsFaxTransportTypeDescribes the Fax transfor Type currently working.
AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.9 |
acIPLegsRxPacketsDescribes the received packets on the Leg.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.10 |
acIPLegsTxPacketsDescribes the Transmitted packets on the Leg.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.11 |
acIPLegsRxBytesDescribes the received Bytes on the Leg.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.12 |
acIPLegsTxBytesDescribes the Transmitted packets on the Leg.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.13 |
acIPLegsJitterDescribes the Jitter on the Leg.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.14 |
acIPLegsPacketLossDescribes the Lost packets on the Leg.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.15 |
acIPLegsSSRCOfSenderDescribes the SSRC Of the Sender.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.16 |
acIPLegsDSPDeviceDescribes the DSP Device Of the Leg.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.17 |
acIPLegsLegNameDescribes the Leg Name as in the Control Protocol.
AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.4.2.1.1.1.18 |