AC-CONTROL-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for AC-CONTROL-MIB.
Main OID:
acControl.1.3.6.1.4.1.5003.9.10.5
193
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
193 total| Object Name |
|---|
acControl MODULE-IDENTITY .1.3.6.1.4.1.5003.9.10.5 |
IMPORTS Unknown .1.3.6.1.4.1.5003.9.10.5 |
acControlConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1 |
acControlCommonConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1 |
acCPLink OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.1 |
acCPKeepAlive OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.1.1 |
acCPKeepAliveEnabledEnables a proprietary keep-alive mechanism, in which a serviceChange
is send with UNDEFINED as the termination ID and restart
method.
0 = disable
>0 = enable.
Access: Instant.
AC INI-Param: KEEPALIVEENABLEDrw Integer32 (-2147483647..2147483647) .1.3.6.1.4.1.5003.9.10.5.1.1.1.1.1 |
acCPKeepAliveIntervalThis parameter is used to define the interval in seconds of
a KeepAlive message.
Access: Instant.
AC INI-Param: KEEPALIVEINTERVALrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.1.1.2 |
acCPTransport OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.1.2 |
acCPTransportTypeDefines the transport type for the control protocol:
0 = UDP
1 = TCP
2 = SCTP.
Access: Offline.
AC INI-Param: CPTRANSPORTTYPErw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.1.1.2.1 |
acCPTransportRetransmitionTimeOutControls protocols retransmission timeout. Sets the initial
time (in msec) for the first retransmission. The retransmission
intervals thereafter increase exponentially.
Access: Instant.
AC INI-Param: MGCPRETRANSMISSIONTIMEOUTrw Integer32 (-2147483647..2147483647) .1.3.6.1.4.1.5003.9.10.5.1.1.1.2.2 |
acCPTransportControlDiffServDefines the value of the field 'DiffServ' in the IP header for
control traffic.
Range: 0 to 63.
Access: Offline.
AC INI-Param: CONTROLDIFFSERVrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.1.2.3 |
acCPTransaction OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.1.3 |
acCPTransactionIDRangeDefines the range for the transaction ID.
Default = 999997999.
Access: Instant.
AC INI-Param: TRANSACTIONIDRANGErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.1.3.1 |
acCPTransactionIDBaseDefines the minimum number for the transaction ID.
Default = 2000.
Access: Instant.
AC INI-Param: TRANSACTIONIDBASErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.1.3.2 |
acCPTransactionRandomizeIDDefines if the transactions produced by the board start with
a fixed or random number.
1 = Randomize On
Refer also to the parameters defining Transaction Id Range
and Transaction Id Base.
Access: Offline.
AC INI-Param: RANDOMIZETRANSACTIONIDrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.1.1.3.3 |
acCPTransactionCommunicationLayerTimeoutAssumed delay of the communication layer. It is used in retransmission.
This parameter defines the maximal time to wait
for a response before declaring a disconnection (in seconds).
Access: Instant.
AC INI-Param: MGCPCOMMUNICATIONLAYERTIMEOUTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.1.3.4 |
acCPDigitCollect OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.2 |
acCPDigitCollectUseEndOfDTMFDefines if the detection of DTMF events is notified at the end
of DTMF or at the start of DTMF.
0 = at start of DTMF
1 = at the end of DTMF.
Access: Instant.
AC INI-Param: MGCPDTMFDETECTIONPOINTrw Integer32 (-2147483647..2147483647) .1.3.6.1.4.1.5003.9.10.5.1.1.2.1 |
acCPDigitCollectDTMFLengthDefines the time to play DTMF (in msec).
Range: 0 to 65535.
Access: Instant.
AC INI-Param: DTMFDIGITLENGTHrw Integer32 (-2147483647..2147483647) .1.3.6.1.4.1.5003.9.10.5.1.1.2.2 |
acCPDigitCollectDTMFInterIntervalDefines the time between DTMFs played (in msec).
Range: 0 to 65535.
Access: Instant.
AC INI-Param: DTMFINTERDIGITINTERVALrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.2.3 |
acCPDigitCollectMapTimeOutTimerDefines the timeout value (T symbol) in a digit map, in increments
of 10. For MEGACO, it's the start timer. For the others,
it's the end timer.
When the value is -1, it means the hardcoded value (16000).
Access: Instant.
AC INI-Param: DIGITMAPTIMEOUTTIMERrw Integer32 (-1..65535) .1.3.6.1.4.1.5003.9.10.5.1.1.2.4 |
acCPDigitCollectMapShortTimerDefines the short timer (S Symbol) value in millisecond, in
a digit map.This timer is typically activated when the repetition
symbol '.' exists.
When the value is -1, it means the hardcoded value (3000).
Access: Instant.
AC INI-Param: cpDIGITMAPSHORTTIMERrw Integer32 (-1..65535) .1.3.6.1.4.1.5003.9.10.5.1.1.2.5 |
acCPDigitCollectMapLongTimerDefines the inter-digit long timer (L Symbol) value in millisecond,
in a digit map.This timer is typically activated between
collected digit when the end of the pattern is not reached
yet.
When the value is -1, it means the hardcoded value (16000).
Access: Instant.
AC INI-Param: cpDIGITMAPLONGTIMERrw Integer32 (-1..65535) .1.3.6.1.4.1.5003.9.10.5.1.1.2.6 |
acCPDigitMap OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.3 |
acCPDigitMapDefaultNameName of the provisioned digit map.
Range: String[30].
Access: Offline.
AC INI-Param: DIGITMAPNAMErw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.3.1 |
acCPDigitMapPatternsThe digit map patterns separated by a vertical bar (|), as defined
in the MEGACO RFC.
Range = String[500].
Access: Offline.
AC INI-Param: DIGITMAPPINGrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.3.2 |
acCPDigitMapDialedStringPrefixDefines a prefix to add to the dialed string.
Range = String[8].
Access: Instant.
AC INI-Param: DialedStringPrefixrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.3.3 |
acCPNaming OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.4 |
acCPNamingGateWayDefines the media gateway's identification name.
MGCP: Gateway's identification name towards the MGCP Call Agent.
If undefined, the gateway name holds the IP address of
the device.
Range: String[63].
Access: Offline.
AC INI-Param: GATEWAYNAMErw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.4.1 |
acCPNamingEndPointMGCP: Gateway's endpoint name. This is a prefix used to identify
the endpoint, i.e., 'ACgw' in the following example:
'ACgw5@acl.com'.
MEGACO: Prefix of the endpoint part of the termination name
Range: String[19]
Default:
MGCP: 'Acgw'
MEGACO: 'line' for analog board and '/c' for trunking boards.
Access: Offline.
AC INI-Param: ENDPOINTNAMErwdeprecated SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.4.2 |
acCPNamingTrunk(MGCP) This parameter generates (together with the parameter
defining the Endpoint Prefix) a local endpoint name on trunk-enabled
media gateways.
(MEGACO) Prefix of the trunk part of the termination name.
Range: String[19]
Default:
MGCP = ' ' (empty string)
MEGACO = ' ' for analog boards and 's' for trunking boards.
Access: Offline.
AC INI-Param: TRUNKNAMErwdeprecated SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.4.3 |
acCPNamingEndpointPrefix(MGCP) This parameter generates (together with parameter Trunk
Name) a local endpoint name on trunk-enabled media gateways.
Range: String[19].
Access: Offline.
AC INI-Param: ENDPOINTPREFIXrwdeprecated SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.4.4 |
acCPNamingCallAgentDomainDefines a domain name to be used to connect with the Call Agent.
The parameter takes precedence over the Call Agent IP and
the provisioned Call Agent parameters.
Range = String[63].
Access: Instant.
AC INI-Param: CALLAGENTDOMAINNAMErw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.4.5 |
acCPNamingCoderTblFileNameThis parameter defines the name of an external coders table.
In this table, the user can decide which coders will be used
in the system. The original file is a text file, and it is
converted by DCONVERT to a bynary file.
Access: Offline.
AC INI-Param: CODERTBLFILENAMErw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.4.6 |
acCPNamingSessionOwnerDefines the owner/creator of the session
Range = String[31].
Access: Instant.
AC INI-Param: CPSDPSESSIONOWNERrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.4.7 |
acCPConference OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.5 |
acCPConferenceMaxUsersDefines the maximal number of users to reserve for a new conference.
The actual conference size can be more than this, but
never less.
Range: 3 to 64.
Access: Instant.
AC INI-Param: CONFERENCEMAXUSERSrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.5.1 |
acCPConferenceMaxSimultaneousSpeakersDefines the maximum number of users that can speak simultaneously
in a conference.
Range: 1 to 3.
Access: Instant.
AC INI-Param: CONFERENCEMAXSIMULTANEOUSSPEAKERSrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.5.2 |
acCPConferenceSignalGenerationEnableGenerates a beep when a participant enters or exits the conference.
0 = Do not generate
1 = Generate.
Access: Instant.
AC INI-Param: CONFERENCESIGNALGENERATIONENABLErw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.1.5.3 |
acCPMedia OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.6 |
acCPMediaRTCPIntervalDefines the time interval between the adjacent RTCP reports
(in msec).
Range: 0 to 65535.
Access: Instant.
AC INI-Param: RTCPINTERVALrw Integer32 (-2147483647..2147483647) .1.3.6.1.4.1.5003.9.10.5.1.1.6.1 |
acCPMediaDefaultCoderThis parameter can be used to set a default coder for channel
opening. For the legal coder names, refer to the product's
User Manual.
Default = cpDPT_G711Mulaw_Coder.
Access: Instant.
AC INI-Param: MGCPDEFAULTCODERrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.1.6.2 |
acCPMediaPacketizationPeriodDefines the default packetization period (Frame Size).
Default = 20 msec (for G.723 30)
Range: 5 to 80.
Access: Instant.
AC INI-Param: DEFAULTPACKETIZATIONPERIODrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.6.3 |
acCPMediaRecordCoderDetermines the coder used for recording to a file.
Access: Instant.
AC INI-Param: cpRecordCoderrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.1.6.4 |
acCPMediaPlayCoderDetermines the coder type to be used when playing a file of
type .raw.
Access: Instant.
AC INI-Param: cpPlayCoderrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.1.6.5 |
acCPMediaDefaultRealmNameBy default, the default CP media realm is the first realm appearing
in the CP media realm table.
The parameter enables the user to set any of the realms appearing
in the table as the default realm.
Access: Offline.
AC INI-Param: cpDefaultMediaRealmNamerw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.6.6 |
acCPMediaDspAllocationMethoddetermines dsp allocation method in IP to IP call.
If this parameter is set to DISABLE_SINGLE_DSP_ALLOCATION (0)
, then two IP terminations with the same configuration will
not allocate DSPs at all and two terminations with different
configuration will cause an allocation of 2 DSPs.
If this parameteris set to ENABLE_SINGLE_DSP_ALLOCATION (1),
then two IP terminations with the same configuration will
not allocate DSPs at all, transcoding with allocation of
one DSP will be used if possible, and two terminations with
different configuration will cause allocation of 2 DSPs.
If this parameter is set to ENFORCE_FULL_DSP_ALLOCATION (2)
then two IP terminations with any configuration will cause
allocation of two DSPs.
Access: Instant.
AC INI-Param: CPMEDIARESOURCEOPTIMIZATIONrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.1.6.7 |
acCPMediaRealmTableControl Protocol media realm configuration table. SEQUENCE OF AcCPMediaRealmEntry .1.3.6.1.4.1.5003.9.10.5.1.1.6.21 |
acCPMediaRealmEntry AcCPMediaRealmEntry .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1 |
acCPMediaRealmIndexIndex Field for line. Internal parameter.
AC INI-Param: CpMediaRealm_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.1 |
acCPMediaRealmRowStatusROWSTATUS field for line. Internal parameter.
AC INI-Param: N/Arw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.2 |
acCPMediaRealmActionMangement Field for ACTIONS. Internal parameter.
AC INI-Param: N/Arw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.3 |
acCPMediaRealmActionResMangement Field for ACTIONS RESULT. Internal parameter.
AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.4 |
acCPMediaRealmNameA string representing the name of the media realm.
Access: Offline.
AC INI-Param: CpMediaRealm_MediaRealmNamerw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.5 |
acCPMediaRealmIPv4IfThe IPv4 interface name corresponding to the one appearing in
the interface table.
Access: Offline.
AC INI-Param: CpMediaRealm_IPv4IFrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.6 |
acCPMediaRealmIPv6IfThe IPv6 interface name corresponding to the one appearing in
the interface table.
Access: Offline.
AC INI-Param: CpMediaRealm_IPv6IFrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.7 |
acCPMediaRealmPortRangeStartThe starting port for the range of media ports.
Access: Offline.
AC INI-Param: CpMediaRealm_PortRangeStartrw Integer32 (-1..60000) .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.8 |
acCPMediaRealmMediaSessionLegThe number of media sessions associated with the range of ports.
Access: Offline.
AC INI-Param: CpMediaRealm_MediaSessionLegrw Integer32 (-1..6000) .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.9 |
acCPMediaRealmPortRangeEndThe ending port for the range of media ports.
AC INI-Param: CpMediaRealm_PortRangeEndro Integer32 (-1..60000) .1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.10 |
acCPMisc OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.7 |
acCPMiscDialToneDurationDefines the timeout (in seconds) for the dial tone signal.
Range: 1 to 65535.
Access: Instant.
AC INI-Param: DIALTONEDURATIONrw Integer32 (-2147483647..2147483647) .1.3.6.1.4.1.5003.9.10.5.1.1.7.1 |
acCPMiscTrunkIDOffsetSets the offset to the trunk numbering.
e.g., Offset = 2 causes the first trunk number to be 2.
Note: This parameter was replaced by the parameter 'EP_NUM'.
Range: 0 to 4294967295.
Access: Offline.
AC INI-Param: MEGACOTRUNKIDOFFSETrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.7.2 |
acCPMiscCompatibilityProfileControlS MGCP/MEGACO functioning for vendor-specific compatibility.
Refer to the product's User's Manual.
Range: Integer > 0
Refer to the product's User's Manual or the enumerator mgTMGCPProfile
for possible values.
Access: Offline.
AC INI-Param: MGCPCOMPATIBILITYPROFILErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.7.3 |
acCPMiscSDPProfileControls MGCP/MEGACO functioning for SDP negotiation. The parameter
is bitwise.
Every new RFC support should be turned on or off with this
parameter.
Each bit function is described in the control protocol chapter.
Access: Instant.
AC INI-Param: CPSDPPROFILErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.1.7.4 |
acCPVxml OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.1.8 |
acCPVxmlEnableVXMLEnables/disables the VXML stack.
0=Disable
1=Enable.
Access: Offline.
AC INI-Param: EnableVXMLrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.1.8.1 |
acProvisionedCallAgent OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.2 |
acProvisionedCallAgentTableMagaco Call agents Table.;The table defines the IP and port of each call agent.;The Row Status in this table is currently degenerated. It is permanently set to 'active(1)'. Also, changing other values in the table can be done freely (no need to set the Row Status to other values). SEQUENCE OF AcProvisionedCallAgentEntry .1.3.6.1.4.1.5003.9.10.5.1.2.1 |
acProvisionedCallAgentEntry AcProvisionedCallAgentEntry .1.3.6.1.4.1.5003.9.10.5.1.2.1.1 |
acProvisionedCallAgentRowStatusProvisioned call agent table row-status.
AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.2.1.1.1 |
acProvisionedCallAgentActionProvisioned call agent table action.
AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.2.1.1.2 |
acProvisionedCallAgentActionResultProvisioned call agent table result.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.2.1.1.3 |
acProvisionedCallAgentIndexMegaco Call Agent Id.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.2.1.1.4 |
acProvisionedCallAgentIpUse this parameter to define a list of up to 10 legal IP addresses
separated by ',' or ';' for the ServiceChange command.
The gateway starts connecting with the first and in case
of failure, attempts the others.
Access: Offline.
AC INI-Param: PROVISIONEDCALLAGENTSrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.2.1.1.5 |
acProvisionedCallAgentPortUse this parameter to define a list of up to 10 Call Agent UDP
ports separated by , or ; for each Call Agent defined
by the parameter used to specify the Allowed Call Agent Address.
Access: Offline.
AC INI-Param: PROVISIONEDCALLAGENTSPORTSrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.2.1.1.6 |
acCallManagerGroupsTableList the trunks in the group. Comma and range can be used SEQUENCE OF AcCallManagerGroupsEntry .1.3.6.1.4.1.5003.9.10.5.1.2.2 |
acCallManagerGroupsEntry AcCallManagerGroupsEntry .1.3.6.1.4.1.5003.9.10.5.1.2.2.1 |
acCallManagerGroupsIndexCall Manager Groups index.
AC INI-Param: CPCallManagerGroups_Indexro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.2.2.1.1 |
acCallManagerGroupsRowStatusCall Manager Groups table row-status.
AC INI-Param: CPCallManagerGroups_RowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.5.1.2.2.1.2 |
acCallManagerGroupsActionCall Manager Groups table action.
AC INI-Param: CPCallManagerGroups_Actionrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.2.2.1.3 |
acCallManagerGroupsActionResultCall Manager Groups table result.
AC INI-Param: CPCallManagerGroups_ActionResro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.2.2.1.4 |
acCallManagerGroupsListList the trunks in the group. Comma and range can be used.
Access: Offline.
AC INI-Param: CPCallManagerGroups_GroupMembersListrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.2.2.1.5 |
acCallManagerGroupsMGCType0- IP4 CA, 1- DNS (MGCPCallAgentDomainName).
Access: Offline.
AC INI-Param: CPCallManagerGroups_MGCTyperw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.2.2.1.6 |
acCallManagerGroupsPrimaryMGCIndxIndex of primary MGC in the call agents list. The value 0 means
there is no IP.
Access: Offline.
AC INI-Param: CPCallManagerGroups_PrimaryMGCIndxrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.2.2.1.7 |
acCallManagerGroupsSecondaryMGCIndxIndex of secondary MGC in the call agents list. If none - set
to 10.
Access: Offline.
AC INI-Param: CPCallManagerGroups_SecondaryMGCIndxrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.2.2.1.8 |
acMGCPConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.3 |
acMGCallAgent OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.3.1 |
acMGCallAgentIPThe Call Agent IP address, in dotted notation, to be used for
the initial Restart in Progress (RSIP) message. Set to 0.0.0.0
to avoid sending RSIP. This parameter overrides the BootP
server's Call Agent IP address, if provided.
Range: Legal IP address.
Access: Offline.
AC INI-Param: CALLAGENTIPrw IpAddress .1.3.6.1.4.1.5003.9.10.5.1.3.1.1 |
acMGCallAgentPortDefines the Call Agent port number. Defaults to the MGCP default
port number of 2427.
Range: 0 to 65534.
Access: Offline.
AC INI-Param: CALLAGENTPORTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.3.1.2 |
acMGCallAgentRedundantIPDefines the redundant Call Agent IP address to be used for the
initial Restart in Progress message (RSIP). Set to 0.0.0.0
to avoid sending RSIP.
Range = IP address in dotted format notation.
Access: Offline.
AC INI-Param: REDUNDANTAGENTIPrw IpAddress .1.3.6.1.4.1.5003.9.10.5.1.3.1.3 |
acMGCallAgentRedundantPortDefines the redundant Call Agent port number. Defaults to the
MGCP default port number of 2427.
Access: Offline.
AC INI-Param: REDUNDANTAGENTPORTrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.3.1.4 |
acMGCallAgentRedundantDomainNameDefines the redundant MGCP Call Agent domain name.
Range = String[63]
Default = ' ' (empty string).
Access: Instant.
AC INI-Param: REDUNDANTCALLAGENTDOMAINNAMErw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.3.1.5 |
acMGCommunication OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.3.2 |
acMGCommunicationConnectionIDBaseDefines the lowest number for the Connection ID values assigned
by the media gateway.
Access: Offline.
AC INI-Param: CONNECTIONIDBASErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.3.2.1 |
acMGCommunicationConnectionIDRangeDefines the range for the Connection ID values assigned by the
gateway.
Default = 999999999.
Access: Offline.
AC INI-Param: CONNECTIONIDRANGErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.3.2.2 |
acMGCommunicationGateWayPortUsers can use this parameter to force the media gateway to listen
to another UDP port instead of to the original 2427, as
defined in RFC 2705.
Range = 0 to 65535.
Access: Offline.
AC INI-Param: GATEWAYMGCPPORTrw Integer32 (-2147483647..2147483647) .1.3.6.1.4.1.5003.9.10.5.1.3.2.3 |
acMGMisc OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.3.3 |
acMGMiscDigitmapMismatchNotificationThe MGCP standard defines that if a number does not match the
digitmap definition, a notification is not sent.
One of the following values:
1 = Send mismatch notification
a digital mismatch notification is sent
or
0 = Do NOT send mismatch notification
a digital mismatch notification is not sent. In the same way,
you can enable MGCP to send notifications upon matching
digitmap.
Access: Instant.
AC INI-Param: MGCPSendDigitmapMismatchNotificationrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.3.3.1 |
acMGMiscPiggyBackingEnableThis parameter configures the option to send piggy backed commands
while RSIPS are sent. For example, if the event is triggered
by the board and RSIP was not sent yet, RSIP will be
sent and piggy back the event along with it, the call manager
will face endpoint restart and than the event.
Default = 1 (piggy back on)
0 = commands sent by gateway will not be piggy backed.
1 = commands sent by gateway will be piggy backed.
.
Access: Offline.
AC INI-Param: EnablePiggyBackingrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.3.3.2 |
acMGMiscUseWildCardWithRSIPWhen wildcard is used RSIPs turn in a single message on EndPoint
Naming configuration and Single message for each trunk
in Trunk Naming configuration. If Off and number of channels
is less than 64 RSIP message sent for each Endpoint. 0 = Do
not use
1 = Use.
Access: Offline.
AC INI-Param: UseWildCardWithRSIPrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.3.3.3 |
acMGNamePattern OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.3.4 |
acMGNamePatternEndpointDefines the endpoint naming pattern for a gateway. The '*' signs
will be replaced with an actual endpoint number or with
a wild-card sign. The string will contain up to 63 characters.
Default value will be 'ACgw*'.
.
Access: Offline.
AC INI-Param: MGCPEndpointNamingPatternrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.3.4.1 |
acMGNamePatternTrunkDefines the trunk and B-channel naming pattern used by the gateway.
The '*' signs will be replaced with a trunk or B-channel
number or with a wild-card sign. The string will contain
up to 63 characters.
Default value will be 'ds*/tr*'.
.
Access: Offline.
AC INI-Param: MGCPTrunkNamingPatternrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.3.4.2 |
acMegacoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4 |
acMCLink OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4.1 |
acMCCommunication OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4.1.1 |
acMCCommunicationCheckLegalityOfMGCThis parameter specifies if MEGACO rejects commands from an
MGC not in the provisioned list.
0 = Don't reject unknown MGCs
1 = Reject unknown MGC.
Access: Instant.
AC INI-Param: MEGACOCHECKLEGALITYOFMGCrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.4.1.1.1 |
acMCCommunicationGateWayMIDDefines the media gateway's MID towards the MEGACO Call Agent.
If empty or illegal, the MID holds the IP address of the
board.
Range: String[64].
Access: Offline.
AC INI-Param: MEGACO_MIDrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.4.1.1.2 |
acMCCommunicationServiceChangeProfileSpecifies the Profile that will be displayed in the MEGACO serviceChange
command.
At this stage, the profile will not determine the features
supported.
Range = String[63].
Access: Offline.
AC INI-Param: CPSERVICECHANGEPROFILErw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.4.1.1.3 |
acMCCommunicationTimer OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4.1.2 |
acMCCommunicationTimerMGProvisionalResponseDefines the provisional response timer for the media gateway
(in msec).
Range: 0 to 20000.
Access: Instant.
AC INI-Param: MGPROVISIONALRESPONSETIMErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.1.2.1 |
acMCCommunicationTimerMGCProvisionalResponseDefines the provisional response timer for the MGC (in msec).
Range: 0 to 20000.
Access: Instant.
AC INI-Param: MGCPROVISIONALRESPONSETIMErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.1.2.2 |
acMCCommunicationTimerMGExecutionTimeDefines the estimated execution time of the media gateway (in
msec).
Range: 0 to 2000.
Access: Instant.
AC INI-Param: MGEXECUTIONTIMErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.1.2.3 |
acMCCommunicationTimerMGCExecutionTimeDefines the estimated execution time of the MGC (in msec).
Range: 0 to 2000.
Access: Instant.
AC INI-Param: MGCEXECUTIONTIMErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.1.2.4 |
acMCCommunicationTimerHangTermTimeoutDefault timeout (in seconds) for sending Hanging Termination
event, when a request for Hanging Termination is sent without
parameters.
Range - 0 -65535.
Access: Instant.
AC INI-Param: MEGACOHangTermTimeoutrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.1.2.5 |
acMCCommunicationTimerRestartMaxWaitingDelayDefines the Maximum Waiting Delay (in milliseconds) before restart
service change when the Media Gateway is powered on.
Access: Instant.
AC INI-Param: RestartMaximumWaitingDelayrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.1.2.6 |
acMCCommunicationTimerTargetMgResponseTimeThe response time is defined as the time from the arrival of
a call set-up request until the response (in msec).
Range = 100-1000 in resolutions of 50 (i.e. 100, 150, 200,
250...).
Access: Instant.
AC INI-Param: TargetMG_ResponseTimerw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.1.2.7 |
acMCNaming OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4.2 |
acMCNamePattern OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4.2.1 |
acMCNamePatternPhysDefines the name pattern of a physical termination.
For Example: 'tgw/t*/c*'. The '*' sign stands for the actual
numbers of the trunk and bchannel.
Range: String [30].
Access: Offline.
AC INI-Param: PHYSTERMNAMEPATTERNrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.4.2.1.1 |
acMCNamePatternLogicalRTPDefines the name pattern of an RTP termination.
For example: 'gw/rtp/*'. The '*' sign stands for the actual
number of the RTP termination.
Range: String [30].
Access: Offline.
AC INI-Param: LOGICALRTPTERMPATTERNrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.4.2.1.2 |
acMCNamePatternLogicalATMDefines the name pattern of an ATM termination.
Range: String [30].
Access: Offline.
AC INI-Param: LOGICALATMTERMPATTERNrwdeprecated SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.4.2.1.3 |
acMCNamePatternConfDefines the name pattern of a conference termination.
Applicable to IPM-1610 and TP-6310 only.
Range: String[32].
Access: Offline.
AC INI-Param: CONFERENCETERMPATTERNrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.4.2.1.4 |
acMCNamePatternBCTNDefines the name pattern of a BCT termination.
Applicable to IPM-1610 and TP-6310 only.
Range: String[32].
Access: Offline.
AC INI-Param: BCTTERMPATTERNrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.4.2.1.5 |
acMCNamePatternAudioDefines the name pattern of an audio termination.
Applicable to IPM-1610 and TP-6310 only.
Range: String[32].
Access: Offline.
AC INI-Param: AUDIOTERMPATTERNrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.4.2.1.6 |
acMCNamePatternTrunkTestDefines the name pattern of a trunk test termination.
Applicable to IPM-1610 and TP-6310 only.
Range: String[32].
Access: Offline.
AC INI-Param: TRUNKTESTTERMPATTERNrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.4.2.1.7 |
acMCNameNumber OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4.2.2 |
acMCNameNumberEphemeralIDOffsetOffset for the ephemeral termination IDs in the gateway.
e.g., offset = 100 causes the first ephemeral termination
ID to be 101.
Note: This parameter was replaced by the parameter 'RTP_Num'.
Range = 0 to 4294967295.
Access: Instant.
AC INI-Param: MEGACOTERMINATIONIDOFFSETrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.1 |
acMCNameNumberPhysicalEndpointTableMagaco physical endpoint's numbering Table.;The table defines per level (e.g. trunk and channel) the numbering starting point and range.;The Row Status in this table is currently degenerated. It is permanently set to 'active(1)'. Also, changing other values in the table can be done freely (no need to set the Row Status to other values). SEQUENCE OF AcMCNameNumberPhysicalEndpointEntry .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21 |
acMCNameNumberPhysicalEndpointEntry AcMCNameNumberPhysicalEndpointEntry .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1 |
acMCNameNumberPhysicalEndpointRowStatusPhysical endpoint table row-status.
AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.1 |
acMCNameNumberPhysicalEndpointActionPhysical endpoint table action.
AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.2 |
acMCNameNumberPhysicalEndpointActionResultPhysical endpoint table result.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.3 |
acMCNameNumberPhysicalEndpointIndexIndex for table use.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.4 |
acMCNameNumberPhysicalEndpointStartDefines the starting number for each name level (level 0 is
the left one when looking at the parameter defining Phys Term
Name Pattern). Thus, to start trunk numbering from 1, set
EP_NUM_0 to 1.
Range: Any positive number.
Access: Offline.
AC INI-Param: EP_NUMrw Integer32 (-1..65535) .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.5 |
acMCNameNumberPhysicalEndpointMinDefines the minimum number for each name level (level 0 is the
left one, i.e., the trunk number).
Access: Offline.
AC INI-Param: EP_MINrwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.6 |
acMCNameNumberPhysicalEndpointMaxDefines the maximum number for each name level (level 0 is the
left one, i.e., the trunk number).
Access: Offline.
AC INI-Param: EP_MAXrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.7 |
acMCNameNumberStreamEndpointTableMagaco stream endpoint's numbering Table.;The table defines per level the numbering starting point and range.;The Row Status in this table is currently degenerated. It is permanently set to 'active(1)'. Also, changing other values in the table can be done freely (no need to set the Row Status to other values). SEQUENCE OF AcMCNameNumberStreamEndpointEntry .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22 |
acMCNameNumberStreamEndpointEntry AcMCNameNumberStreamEndpointEntry .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1 |
acMCNameNumberStreamEndpointRowStatusStream endpoint table row-status.
AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.1 |
acMCNameNumberStreamEndpointActionStream endpoint table action.
AC INI-Param: N/Arw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.2 |
acMCNameNumberStreamEndpointActionResultStream endpoint table result.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.3 |
acMCNameNumberStreamEndpointIndexIndex for table use.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.4 |
acMCNameNumberStreamEndpointRTPStartDefines the starting number for each name's RTP termination
level.
Access: Instant.
AC INI-Param: RTP_NUMrw Integer32 (-1..65535) .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.5 |
acMCNameNumberStreamEndpointATMStartDefines the starting number for each ATM termination level name.
Range: Any positive number.
Access: Instant.
AC INI-Param: ATM_NUMrwdeprecated Integer32 (-1..65535) .1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.6 |
acMCPoolSize OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4.3 |
acMCPoolSizeProvisionedConfProvisioned conference size indicated by parameter X-PtEngr.
Applicable to IPM-1610 and TP-6310 only.
The value is dynamically limited according to the number of
DSP channels and the used feature key.
Range: 1 to 65535.
Access: Instant.
AC INI-Param: MEGACOPROVISIONEDCONFSIZErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.3.1 |
acMCPoolSizeProvisionedBCTProvisioned BCT size indicated by parameter X-PtEngr.
Applicable to IPM-1610 and TP-6310 only.
Range: 1 to 65535.
Access: Instant.
AC INI-Param: MEGACOPROVISIONEDBCTSIZErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.3.2 |
acMCPoolSizeProvisionedAudioDefines the provisioned audio size indicated by parameter X-PtEngr.
Applicable to IPM-1610 and TP-6310 only.
Range: 1 to 65535.
Access: Instant.
AC INI-Param: MEGACOPROVISIONEDAUDIOSIZErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.3.3 |
acMCPoolSizeNumOfTestTrunkPortsDefines the provisioned TT (trunk testing) size indicated by
the parameter X-PtEngr.
Applicable to IPM-1610 and TP-6310 only.
Range: 1 to 65535.
Access: Instant.
AC INI-Param: MEGACOPROVISIONEDTRUNKTESTINGSIZErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.3.4 |
acMCProfile OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4.4 |
acMCProfileBinaryUsed to profile the binary ASN.1 encoding.
Range: Integer >0
Refer to the product's User's Manual for possible values.
Access: Instant.
AC INI-Param: MEGACOASN1PROFILErwdeprecated Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.4.1 |
acMCProfileAASPackagesSelects the profile for the Advanced Audio Syntax specification.
0 = TD-51 standard
1 = H.248.9 standard
2 = MGCP Packet Cable
3 = SIP MSCML.
Access: Offline.
AC INI-Param: AASPACKAGESPROFILErw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.4.4.2 |
acMCProfileTdmHairPinningModedeterminewhich Hair-pinning mode is to be used:
mode 0 - will create TDM to TDM connection through IP software
Loopback
mode 1 - will create 'pure' hair-pinning i.e. TDM to TDM connection
through PSTN .
Access: Offline.
AC INI-Param: MegacoTdmHairPinningModerw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.4.4.3 |
acMCMisc OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4.5 |
acMCMiscEncodingMethodSets the MEGACO coding method.
0 = Text mode.
Access: Offline.
AC INI-Param: MEGACOENCODINGrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.4.5.1 |
acMCMiscContextIDOffsetOffset for the context ID generated by the gateway.
e.g., offset = 100 causes the first context to be 101.
Range = 0 to 4294967295.
Access: Instant.
AC INI-Param: MEGACOCONTEXTIDOFFSETrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.5.2 |
acMCMiscDisconnectBehaviorDetermines PBX behavior upon losing connectivity with H.248
Call agent or TPNCP.
1 = No Action - keep routing traffic
2 = Disable Trunks - stop routing trafic BUT RTP remains active
3 = Reset Board - Stop all.
Access: Offline.
AC INI-Param: DisconnectBehaviorrw Enumeration .1.3.6.1.4.1.5003.9.10.5.1.4.5.3 |
acMCMiscMegacoVersionDetermines the maximum Megaco Version number that is supported
by the device.
Access: Offline.
AC INI-Param: MegacoVersionrw SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.1.4.5.4 |
acMCAMS OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.4.6 |
acMCAMSNumOfConferencePortsNumber Of Conference ports. How many ports on the TPM are allocated
to the conferencing service.
Access: Instant.
AC INI-Param: MEGACOPROVISIONEDCONFSIZErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.6.1 |
acMCAMSNumOfTestTrunkPortsNumber Of Test Trunk ports. How many ports on the TPM are allocated
to the Test Trunk service.
Access: Instant.
AC INI-Param: MEGACOPROVISIONEDTRUNKTESTINGSIZErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.6.2 |
acMCAMSNumOfLawfulInterceptPortsNumber Of Test Trunk ports. How many ports on the TPM are allocated
to the Lawful Intercept service.
Access: Instant.
AC INI-Param: MEGACOPROVISIONEDBCTSIZErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.6.3 |
acMCAMSNumOfAnnouncementPortsNumber Of Test Trunk ports. How many ports on the TPM are allocated
to the Announcement service.
Access: Instant.
AC INI-Param: MEGACOPROVISIONEDAUDIOSIZErw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.4.6.4 |
acLocalSwitching OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.1.5 |
acLocalSwitchingTableLocal Switching definitions for analog ports SEQUENCE OF AcLocalSwitchingEntry .1.3.6.1.4.1.5003.9.10.5.1.5.1 |
acLocalSwitchingEntry AcLocalSwitchingEntry .1.3.6.1.4.1.5003.9.10.5.1.5.1.1 |
acLocalSwitchingIndexAC INI-Param: LocalSwitchingPorts_Index Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.5.1.1.1 |
acLocalSwitchingRowStatusAC INI-Param: LocalSwitchingPorts_RowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.5.1.5.1.1.2 |
acLocalSwitchingPhoneNumberLocal Switching definitions for analog ports.
Access: Offline.
AC INI-Param: LocalSwitchingPorts_PhoneNumberrw Unsigned32 .1.3.6.1.4.1.5003.9.10.5.1.5.1.1.3 |
acControlStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.2 |
acActiveCallAgent OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.2.1 |
acActiveCallAgentIpMegaco Active Call Agent.
AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.2.1.1 |
acActiveCallAgentPortMegaco Active Port.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.2.1.2 |
acCurrentCalls OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.2.2 |
acCallInfo OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.2.2.1 |
acCallInfoTable SEQUENCE OF AcCallInfoEntry .1.3.6.1.4.1.5003.9.10.5.2.2.1.1 |
acCallInfoEntry AcCallInfoEntry .1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1 |
acCallInfoCallIndexThe Index of a call.
AC INI-Param: N/A Unsigned32 .1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.1 |
acCallInfoCallIdDescribes the Call ID in the control protocol.For mgcp, string,
For megaco asci.
AC INI-Param: N/Aro SnmpAdminString .1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.2 |
acCallInfoMediaTypeThe type of the media transforming.
AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.3 |
acCallInfoControlProtocolThe name of the control protocol active now.
AC INI-Param: N/Aro Enumeration .1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.4 |
acCallInfoDurationthe duration of a call from the momet it started.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.5 |
acCallHierarchy OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.2.2.2 |
acCallHierarchyTable SEQUENCE OF AcCallHierarchyEntry .1.3.6.1.4.1.5003.9.10.5.2.2.2.1 |
acCallHierarchyEntry AcCallHierarchyEntry .1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1 |
acCallHierarchyCallIndexThe Index of a call.
AC INI-Param: N/A Integer32 .1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.1 |
acCallHierarchyLegTypeDescribes the Type of an end poit.
AC INI-Param: N/A Enumeration .1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.2 |
acCallHierarchyLegIDDescribes the end point of a call by index.
AC INI-Param: N/A Integer32 .1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.3 |
acCallHierarchyRowPointerA pointer to the right instance in the current Leg table.
AC INI-Param: N/Aro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.4 |
acMegacoStatus OBJECT IDENTIFIER .1.3.6.1.4.1.5003.9.10.5.2.3 |
acMegacoStatusCurrentVersionThe Megaco version currently being used.
AC INI-Param: N/Aro Unsigned32 .1.3.6.1.4.1.5003.9.10.5.2.3.1 |