A3COM-HUAWEI-ATM-DXI-MIB
The A3COM-HUAWEI-ATM-DXI-MIB enables remote configuration and monitoring of Asynchronous Transfer Mode (ATM) Digital Cross-Connect Interface (DXI) parameters on A3Com and Huawei network equipment. It facilitates the management of ATM-DXI interface states, traffic statistics, and protocol-specific configuration objects required for maintaining synchronous data transmission over T1/E1 physical links.
Imported Objects
Objects
25 total| Object Name |
|---|
h3cAtmDxiThis MIB contains objects to manage configuration of ATM-DXI.
There are no constraints on this MIB. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.49 |
h3cAtmDxiScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.49.1 |
h3cAtmDxiConfModeThis node identifies the ATM-DXI mode being
used at the ATM-DXI port.ro Enumeration .1.3.6.1.4.1.2011.10.2.49.1.1 |
h3cAtmDxiIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.49.2 |
h3cAtmDxiPvcTableThis table describes information of PVC in ATM-DXI interface. SEQUENCE OF H3cAtmDxiPvcEntry .1.3.6.1.4.1.2011.10.2.49.2.1 |
h3cAtmDxiPvcEntryThe entry of h3cAtmDxiPvcTable. H3cAtmDxiPvcEntry .1.3.6.1.4.1.2011.10.2.49.2.1.1 |
h3cAtmDxiPvcVpiThe value of VPI. It can't be 0 if h3cAtmDxiPvcVci is 0. Integer32 .1.3.6.1.4.1.2011.10.2.49.2.1.1.1 |
h3cAtmDxiPvcVciThe value of VCI. It can't be 0 if h3cAtmDxiPvcVpi is 0. Integer32 .1.3.6.1.4.1.2011.10.2.49.2.1.1.2 |
h3cAtmDxiPvcDFAThe index of PVC. It is equal with vci and VPI. And this node value
is correlate with h3cAtmDxiPvcVpi and h3cAtmDxiPvcVci.rw Integer32 .1.3.6.1.4.1.2011.10.2.49.2.1.1.3 |
h3cAtmDxiPvcEncTypeEncapsulation type of the frame.rw Enumeration .1.3.6.1.4.1.2011.10.2.49.2.1.1.4 |
h3cAtmDxiPvcMapCountThe number of map. One map can only associate with one PVC, but
one PVC can associate with 32 maps. This node is the map count
which one PVC associated with.rw Integer32 .1.3.6.1.4.1.2011.10.2.49.2.1.1.5 |
h3cAtmDxiPvcRowStatusOnly support 'destroy' 'createAndGo' and 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.49.2.1.1.6 |
h3cAtmDxiMapTableThis table describes PVC map information. SEQUENCE OF H3cAtmDxiMapEntry .1.3.6.1.4.1.2011.10.2.49.2.2 |
h3cAtmDxiMapEntryThe entry of h3cAtmDxiMapTable. H3cAtmDxiMapEntry .1.3.6.1.4.1.2011.10.2.49.2.2.1 |
h3cAtmDxiMapPeerIpTypeThe type of ip address: IPv4 or IPv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.49.2.2.1.1 |
h3cAtmDxiMapPeerIpThe peer ip address. This ip address is the peer ip
address which the frame will arrive. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.49.2.2.1.2 |
h3cAtmDxiMapPvcVpiThe VPI of PVC. It can't be 0 if h3cAtmDxiMapPvcVci is 0. Integer32 .1.3.6.1.4.1.2011.10.2.49.2.2.1.3 |
h3cAtmDxiMapPvcVciThe VCI of PVC. It can't be 0 if h3cAtmDxiMapPvcVpi is 0. Integer32 .1.3.6.1.4.1.2011.10.2.49.2.2.1.4 |
h3cAtmDxiMapTypePvc map type. Enumeration .1.3.6.1.4.1.2011.10.2.49.2.2.1.5 |
h3cAtmDxiMapInarpTimeThe interval time of inarp request. This node describes
the interval time inarp request frame sent. If the h3cAtmDxiMapType
isn't inarp, this value is 0. Its unit is minute.rw Integer32 (0 | 5..10) .1.3.6.1.4.1.2011.10.2.49.2.2.1.6 |
h3cAtmDxiMapBroEnableWhether ATM-DXI map enable broadcast or not.rw Enumeration .1.3.6.1.4.1.2011.10.2.49.2.2.1.7 |
h3cAtmDxiMapRowStatusOnly support 'destroy', 'createAndGo' and 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.49.2.2.1.8 |
h3cAtmDxiConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.49.3 |
h3cAtmDxiCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.49.3.1 |
h3cAtmDxiGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.49.3.2 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.