sonetFarEndVT
AI MIB Summary
The `sonetFarEndVT` MIB module monitors performance and error metrics for Virtual Tributaries (VT) on the far end of SONET/SDH interfaces, specifically tracking defects and signal quality parameters such as Far End Block Errors (FEBE) and Far End Line Code Violations (FELCV). This data enables network engineers to diagnose transmission impairments and validate the integrity of multiplexed lower-rate payloads traversing the SONET/SDH transport network.
The MIB module to describe SONET/SDH interfaces objects.
Main OID:
sonetMIB.1.3.6.1.2.1.10.39
130
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
130 total| Object Name |
|---|
sonetMIBThe MIB module to describe
SONET/SDH interfaces objects. MODULE-IDENTITY .1.3.6.1.2.1.10.39 |
sonetObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.1 |
sonetMedium OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.1.1 |
sonetMediumTableThe SONET/SDH Medium table. SEQUENCE OF SonetMediumEntry .1.3.6.1.2.1.10.39.1.1.1 |
sonetMediumEntryAn entry in the SONET/SDH Medium table. SonetMediumEntry .1.3.6.1.2.1.10.39.1.1.1.1 |
sonetMediumTypeThis variable identifies whether a SONET
or a SDH signal is used across this interface.rw Enumeration .1.3.6.1.2.1.10.39.1.1.1.1.1 |
sonetMediumTimeElapsedThe number of seconds, including partial seconds,
that have elapsed since the beginning of the current
measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the
current interval exceeds the maximum value, the
agent will return the maximum value.ro Integer32 .1.3.6.1.2.1.10.39.1.1.1.1.2 |
sonetMediumValidIntervalsThe number of previous 15-minute intervals
for which data was collected.
A SONET/SDH interface must be capable
of supporting at least n intervals.
The minimum value of n is 4.
The default of n is 32.
The maximum value of n is 96.
The value will be <n> unless the measurement was
(re-)started within the last (<n>*15) minutes, in which
case the value will be the number of complete 15
minute intervals for which the agent has at least
some data. In certain cases (e.g., in the case
where the agent is a proxy) it is possible that some
intervals are unavailable. In this case, this
interval is the maximum interval number for
which data is available.ro Integer32 .1.3.6.1.2.1.10.39.1.1.1.1.3 |
sonetMediumLineCodingThis variable describes the line coding for
this interface. The B3ZS and CMI are used for
electrical SONET/SDH signals (STS-1 and STS-3).
The Non-Return to Zero (NRZ) and the Return
to Zero are used for optical SONET/SDH signals.rw Enumeration .1.3.6.1.2.1.10.39.1.1.1.1.4 |
sonetMediumLineTypeThis variable describes the line type for
this interface. The line types are
Short and Long Range
Single Mode fiber or Multi-Mode fiber interfaces,
and coax and UTP for electrical interfaces. The
value sonetOther should be used when the Line Type is
not one of the listed values.rw Enumeration .1.3.6.1.2.1.10.39.1.1.1.1.5 |
sonetMediumCircuitIdentifierThis variable contains the transmission
vendor's circuit identifier, for the
purpose of facilitating troubleshooting.
Note that the circuit identifier, if available,
is also represented by ifPhysAddress.rw DisplayString .1.3.6.1.2.1.10.39.1.1.1.1.6 |
sonetMediumInvalidIntervalsThe number of intervals in the range from
0 to sonetMediumValidIntervals for which no
data is available. This object will typically
be zero except in cases where the data for some
intervals are not available (e.g., in proxy
situations).ro Integer32 .1.3.6.1.2.1.10.39.1.1.1.1.7 |
sonetMediumLoopbackConfigThe current loopback state of the SONET/SDH interface. The
values mean:
sonetNoLoop
Not in the loopback state. A device that is not
capable of performing a loopback on this interface
shall always return this value.
sonetFacilityLoop
The received signal at this interface is looped back
out through the corresponding transmitter in the return
direction.
sonetTerminalLoop
The signal that is about to be transmitted is connected
to the associated incoming receiver.
sonetOtherLoop
Loopbacks that are not defined here.rw Bits .1.3.6.1.2.1.10.39.1.1.1.1.8 |
sonetSESthresholdSetAn enumerated integer indicating which
recognized set of SES thresholds that
the agent uses for determining severely
errored seconds and unavailable time.
other(1)
None of the following.
Bellcore1991(2)
Bellcore TR-NWT-000253, 1991 [32], or
ANSI T1M1.3/93-005R2, 1993 [22].
See also Appendix B.
ansi1993(3)
ANSI T1.231, 1993 [31], or
Bellcore GR-253-CORE, Issue 2, 1995 [34]
itu1995(4)
ITU Recommendation G.826, 1995 [33]
ansi1997(5)
ANSI T1.231, 1997 [35]
If a manager changes the value of this
object then the SES statistics collected
prior to this change must be invalidated.rw Enumeration .1.3.6.1.2.1.10.39.1.1.2 |
sonetSection OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.1.2 |
sonetSectionCurrentTableThe SONET/SDH Section Current table. SEQUENCE OF SonetSectionCurrentEntry .1.3.6.1.2.1.10.39.1.2.1 |
sonetSectionCurrentEntryAn entry in the SONET/SDH Section Current table. SonetSectionCurrentEntry .1.3.6.1.2.1.10.39.1.2.1.1 |
sonetSectionCurrentStatusThis variable indicates the
status of the interface.
The sonetSectionCurrentStatus
is a bit map represented
as a sum, therefore,
it can represent multiple defects
simultaneously.
The sonetSectionNoDefect should be
set if and only if
no other flag is set.
The various bit positions are:
1 sonetSectionNoDefect
2 sonetSectionLOS
4 sonetSectionLOFro Integer32 .1.3.6.1.2.1.10.39.1.2.1.1.1 |
sonetSectionCurrentESsThe counter associated with the number of Errored
Seconds encountered by a SONET/SDH
Section in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.2.1.1.2 |
sonetSectionCurrentSESsThe counter associated with the number of
Severely Errored Seconds
encountered by a SONET/SDH Section in the current 15
minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.2.1.1.3 |
sonetSectionCurrentSEFSsThe counter associated with the number of
Severely Errored Framing Seconds
encountered by a SONET/SDH Section in the current
15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.2.1.1.4 |
sonetSectionCurrentCVsThe counter associated with the number of Coding
Violations encountered by a
SONET/SDH Section in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.2.1.1.5 |
sonetSectionIntervalTableThe SONET/SDH Section Interval table. SEQUENCE OF SonetSectionIntervalEntry .1.3.6.1.2.1.10.39.1.2.2 |
sonetSectionIntervalEntryAn entry in the SONET/SDH Section Interval table. SonetSectionIntervalEntry .1.3.6.1.2.1.10.39.1.2.2.1 |
sonetSectionIntervalNumberA number between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval,
and the interval identified
by N is the interval immediately preceding the
one identified
by N-1. Integer32 .1.3.6.1.2.1.10.39.1.2.2.1.1 |
sonetSectionIntervalESsThe counter associated with the number of
Errored Seconds encountered
by a SONET/SDH Section in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.2.2.1.2 |
sonetSectionIntervalSESsThe counter associated with the number of
Severely Errored Seconds
encountered by a SONET/SDH Section in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.2.2.1.3 |
sonetSectionIntervalSEFSsThe counter associated with the number of
Severely Errored Framing Seconds
encountered by a SONET/SDH Section in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.2.2.1.4 |
sonetSectionIntervalCVsThe counter associated with the number of Coding
Violations encountered by a
SONET/SDH Section in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.2.2.1.5 |
sonetSectionIntervalValidDataThis variable indicates if the data for this
interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.39.1.2.2.1.6 |
sonetLine OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.1.3 |
sonetLineCurrentTableThe SONET/SDH Line Current table. SEQUENCE OF SonetLineCurrentEntry .1.3.6.1.2.1.10.39.1.3.1 |
sonetLineCurrentEntryAn entry in the SONET/SDH Line Current table. SonetLineCurrentEntry .1.3.6.1.2.1.10.39.1.3.1.1 |
sonetLineCurrentStatusThis variable indicates the
status of the interface.
The sonetLineCurrentStatus
is a bit map represented
as a sum, therefore,
it can represent multiple defects
simultaneously.
The sonetLineNoDefect should be
set if and only if
no other flag is set.
The various bit positions are:
1 sonetLineNoDefect
2 sonetLineAIS
4 sonetLineRDIro Integer32 .1.3.6.1.2.1.10.39.1.3.1.1.1 |
sonetLineCurrentESsThe counter associated with the number of Errored
Seconds encountered by a SONET/SDH
Line in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.3.1.1.2 |
sonetLineCurrentSESsThe counter associated with the number of
Severely Errored Seconds
encountered by a SONET/SDH Line in the current 15
minute
interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.3.1.1.3 |
sonetLineCurrentCVsThe counter associated with the number of Coding
Violations encountered by a
SONET/SDH Line in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.3.1.1.4 |
sonetLineCurrentUASsThe counter associated with the number of
Unavailable Seconds
encountered by a SONET/SDH Line in the current 15
minute
interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.3.1.1.5 |
sonetLineIntervalTableThe SONET/SDH Line Interval table. SEQUENCE OF SonetLineIntervalEntry .1.3.6.1.2.1.10.39.1.3.2 |
sonetLineIntervalEntryAn entry in the SONET/SDH Line Interval table. SonetLineIntervalEntry .1.3.6.1.2.1.10.39.1.3.2.1 |
sonetLineIntervalNumberA number between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval,
and the interval identified
by N is the interval immediately preceding the
one identified
by N-1. Integer32 .1.3.6.1.2.1.10.39.1.3.2.1.1 |
sonetLineIntervalESsThe counter associated with the number of
Errored Seconds encountered
by a SONET/SDH Line in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.3.2.1.2 |
sonetLineIntervalSESsThe counter associated with the number of
Severely Errored Seconds
encountered by a SONET/SDH Line in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.3.2.1.3 |
sonetLineIntervalCVsThe counter associated with the number of Coding
Violations encountered by a
SONET/SDH Line in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.3.2.1.4 |
sonetLineIntervalUASsThe counter associated with the
number of Unavailable Seconds
encountered by a SONET/SDH Line in
a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.3.2.1.5 |
sonetLineIntervalValidDataThis variable indicates if the data for this
interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.39.1.3.2.1.6 |
sonetFarEndLine OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.1.4 |
sonetFarEndLineCurrentTableThe SONET/SDH Far End Line Current table. SEQUENCE OF SonetFarEndLineCurrentEntry .1.3.6.1.2.1.10.39.1.4.1 |
sonetFarEndLineCurrentEntryAn entry in the SONET/SDH Far End Line Current table. SonetFarEndLineCurrentEntry .1.3.6.1.2.1.10.39.1.4.1.1 |
sonetFarEndLineCurrentESsThe counter associated with the number of Far
End Errored Seconds encountered by a SONET/SDH
interface in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.4.1.1.1 |
sonetFarEndLineCurrentSESsThe counter associated with the number of
Far End Severely Errored Seconds
encountered by a SONET/SDH Medium/Section/Line
interface in the current 15 minute
interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.4.1.1.2 |
sonetFarEndLineCurrentCVsThe counter associated with the number of
Far End Coding Violations reported via
the far end block error count
encountered by a
SONET/SDH Medium/Section/Line
interface in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.4.1.1.3 |
sonetFarEndLineCurrentUASsThe counter associated with the number of
Far End Unavailable Seconds
encountered by a
SONET/SDH Medium/Section/Line
interface in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.4.1.1.4 |
sonetFarEndLineIntervalTableThe SONET/SDH Far End Line Interval table. SEQUENCE OF SonetFarEndLineIntervalEntry .1.3.6.1.2.1.10.39.1.4.2 |
sonetFarEndLineIntervalEntryAn entry in the SONET/SDH Far
End Line Interval table. SonetFarEndLineIntervalEntry .1.3.6.1.2.1.10.39.1.4.2.1 |
sonetFarEndLineIntervalNumberA number between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval,
and the interval identified
by N is the interval immediately preceding the
one identified
by N-1. Integer32 .1.3.6.1.2.1.10.39.1.4.2.1.1 |
sonetFarEndLineIntervalESsThe counter associated with the number of
Far End Errored Seconds encountered
by a SONET/SDH Line
interface in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.4.2.1.2 |
sonetFarEndLineIntervalSESsThe counter associated with the number of
Far End Severely Errored Seconds
encountered by a SONET/SDH Line
interface in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.4.2.1.3 |
sonetFarEndLineIntervalCVsThe counter associated with the number of
Far End Coding Violations reported via
the far end block error count
encountered by a
SONET/SDH Line
interface in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.4.2.1.4 |
sonetFarEndLineIntervalUASsThe counter associated with the number of
Far End Unavailable Seconds
encountered by a
SONET/SDH Line
interface in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.1.4.2.1.5 |
sonetFarEndLineIntervalValidDataThis variable indicates if the data for this
interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.39.1.4.2.1.6 |
sonetObjectsPath OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.2 |
sonetPath OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.2.1 |
sonetPathCurrentTableThe SONET/SDH Path Current table. SEQUENCE OF SonetPathCurrentEntry .1.3.6.1.2.1.10.39.2.1.1 |
sonetPathCurrentEntryAn entry in the SONET/SDH Path Current table. SonetPathCurrentEntry .1.3.6.1.2.1.10.39.2.1.1.1 |
sonetPathCurrentWidthA value that indicates the type of the SONET/SDH
Path. For SONET, the assigned types are
the STS-Nc SPEs, where N = 1, 3, 12, 24, and 48.
STS-1 is equal to 51.84 Mbps. For SDH, the assigned
types are the STM-Nc VCs, where N = 1, 4, and 16.rw Enumeration .1.3.6.1.2.1.10.39.2.1.1.1.1 |
sonetPathCurrentStatusThis variable indicates the
status of the interface.
The sonetPathCurrentStatus
is a bit map represented
as a sum, therefore,
it can represent multiple defects
simultaneously.
The sonetPathNoDefect should be
set if and only if
no other flag is set.
The various bit positions are:
1 sonetPathNoDefect
2 sonetPathSTSLOP
4 sonetPathSTSAIS
8 sonetPathSTSRDI
16 sonetPathUnequipped
32 sonetPathSignalLabelMismatchro Integer32 .1.3.6.1.2.1.10.39.2.1.1.1.2 |
sonetPathCurrentESsThe counter associated with the number of Errored
Seconds encountered by a SONET/SDH
Path in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.1.1.1.3 |
sonetPathCurrentSESsThe counter associated with the number of
Severely Errored Seconds
encountered by a SONET/SDH Path in the current 15
minute
interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.1.1.1.4 |
sonetPathCurrentCVsThe counter associated with the number of Coding
Violations encountered by a
SONET/SDH Path in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.1.1.1.5 |
sonetPathCurrentUASsThe counter associated with the number of
Unavailable Seconds
encountered by a Path in the current
15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.1.1.1.6 |
sonetPathIntervalTableThe SONET/SDH Path Interval table. SEQUENCE OF SonetPathIntervalEntry .1.3.6.1.2.1.10.39.2.1.2 |
sonetPathIntervalEntryAn entry in the SONET/SDH Path Interval table. SonetPathIntervalEntry .1.3.6.1.2.1.10.39.2.1.2.1 |
sonetPathIntervalNumberA number between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval,
and the interval identified
by N is the interval immediately preceding the
one identified
by N-1. Integer32 .1.3.6.1.2.1.10.39.2.1.2.1.1 |
sonetPathIntervalESsThe counter associated with the number of
Errored Seconds encountered
by a SONET/SDH Path in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.1.2.1.2 |
sonetPathIntervalSESsThe counter associated with the number of
Severely Errored Seconds
encountered by a SONET/SDH Path in
a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.1.2.1.3 |
sonetPathIntervalCVsThe counter associated with the number of Coding
Violations encountered by a
SONET/SDH Path in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.1.2.1.4 |
sonetPathIntervalUASsThe counter associated with the number of
Unavailable Seconds
encountered by a Path in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.1.2.1.5 |
sonetPathIntervalValidDataThis variable indicates if the data for this
interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.39.2.1.2.1.6 |
sonetFarEndPath OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.2.2 |
sonetFarEndPathCurrentTableThe SONET/SDH Far End Path Current table. SEQUENCE OF SonetFarEndPathCurrentEntry .1.3.6.1.2.1.10.39.2.2.1 |
sonetFarEndPathCurrentEntryAn entry in the SONET/SDH Far End Path Current table. SonetFarEndPathCurrentEntry .1.3.6.1.2.1.10.39.2.2.1.1 |
sonetFarEndPathCurrentESsThe counter associated with the number of Far
End Errored Seconds encountered by a SONET/SDH
interface in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.2.1.1.1 |
sonetFarEndPathCurrentSESsThe counter associated with the number of
Far End Severely Errored Seconds
encountered by a SONET/SDH Path
interface in the current 15 minute
interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.2.1.1.2 |
sonetFarEndPathCurrentCVsThe counter associated with the number of
Far End Coding Violations reported via
the far end block error count
encountered by a
SONET/SDH Path interface in
the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.2.1.1.3 |
sonetFarEndPathCurrentUASsThe counter associated with the number of
Far End Unavailable Seconds
encountered by a
SONET/SDH Path interface in
the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.2.1.1.4 |
sonetFarEndPathIntervalTableThe SONET/SDH Far End Path Interval table. SEQUENCE OF SonetFarEndPathIntervalEntry .1.3.6.1.2.1.10.39.2.2.2 |
sonetFarEndPathIntervalEntryAn entry in the SONET/SDH Far
End Path Interval table. SonetFarEndPathIntervalEntry .1.3.6.1.2.1.10.39.2.2.2.1 |
sonetFarEndPathIntervalNumberA number between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval,
and the interval identified
by N is the interval immediately preceding the
one identified
by N-1. Integer32 .1.3.6.1.2.1.10.39.2.2.2.1.1 |
sonetFarEndPathIntervalESsThe counter associated with the number of
Far End Errored Seconds encountered
by a SONET/SDH Path interface in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.2.2.1.2 |
sonetFarEndPathIntervalSESsThe counter associated with the number of
Far End Severely Errored Seconds
encountered by a SONET/SDH Path interface
in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.2.2.1.3 |
sonetFarEndPathIntervalCVsThe counter associated with the number of
Far End Coding Violations reported via
the far end block error count
encountered by a
SONET/SDH Path interface
in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.2.2.1.4 |
sonetFarEndPathIntervalUASsThe counter associated with the number of
Far End Unavailable Seconds
encountered by a
SONET/SDH Path interface in
a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.2.2.2.1.5 |
sonetFarEndPathIntervalValidDataThis variable indicates if the data for this
interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.39.2.2.2.1.6 |
sonetObjectsVT OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.3 |
sonetVT OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.3.1 |
sonetVTCurrentTableThe SONET/SDH VT Current table. SEQUENCE OF SonetVTCurrentEntry .1.3.6.1.2.1.10.39.3.1.1 |
sonetVTCurrentEntryAn entry in the SONET/SDH VT Current table. SonetVTCurrentEntry .1.3.6.1.2.1.10.39.3.1.1.1 |
sonetVTCurrentWidthA value that indicates the type of the SONET
VT and SDH VC. Assigned widths are
VT1.5/VC11, VT2/VC12, VT3, VT6/VC2, and VT6c.rw Enumeration .1.3.6.1.2.1.10.39.3.1.1.1.1 |
sonetVTCurrentStatusThis variable indicates the
status of the interface.
The sonetVTCurrentStatus
is a bit map represented
as a sum, therefore,
it can represent multiple defects
and failures
simultaneously.
The sonetVTNoDefect should be
set if and only if
no other flag is set.
The various bit positions are:
1 sonetVTNoDefect
2 sonetVTLOP
4 sonetVTPathAIS
8 sonetVTPathRDI
16 sonetVTPathRFI
32 sonetVTUnequipped
64 sonetVTSignalLabelMismatchro Integer32 .1.3.6.1.2.1.10.39.3.1.1.1.2 |
sonetVTCurrentESsThe counter associated with the number of Errored
Seconds encountered by a SONET/SDH
VT in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.1.1.1.3 |
sonetVTCurrentSESsThe counter associated with the number of
Severely Errored Seconds
encountered by a SONET/SDH VT in the current 15 minute
interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.1.1.1.4 |
sonetVTCurrentCVsThe counter associated with the number of Coding
Violations encountered by a
SONET/SDH VT in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.1.1.1.5 |
sonetVTCurrentUASsThe counter associated with the number of
Unavailable Seconds
encountered by a VT in the current
15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.1.1.1.6 |
sonetVTIntervalTableThe SONET/SDH VT Interval table. SEQUENCE OF SonetVTIntervalEntry .1.3.6.1.2.1.10.39.3.1.2 |
sonetVTIntervalEntryAn entry in the SONET/SDH VT Interval table. SonetVTIntervalEntry .1.3.6.1.2.1.10.39.3.1.2.1 |
sonetVTIntervalNumberA number between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval,
and the interval identified
by N is the interval immediately preceding the
one identified
by N-1. Integer32 .1.3.6.1.2.1.10.39.3.1.2.1.1 |
sonetVTIntervalESsThe counter associated with the number of
Errored Seconds encountered
by a SONET/SDH VT in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.1.2.1.2 |
sonetVTIntervalSESsThe counter associated with the number of
Severely Errored Seconds
encountered by a SONET/SDH VT
in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.1.2.1.3 |
sonetVTIntervalCVsThe counter associated with the number of Coding
Violations encountered by a
SONET/SDH VT in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.1.2.1.4 |
sonetVTIntervalUASsThe counter associated with the number of
Unavailable Seconds
encountered by a VT in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.1.2.1.5 |
sonetVTIntervalValidDataThis variable indicates if the data for this
interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.39.3.1.2.1.6 |
sonetFarEndVT OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.3.2 |
sonetFarEndVTCurrentTableThe SONET/SDH Far End VT Current table. SEQUENCE OF SonetFarEndVTCurrentEntry .1.3.6.1.2.1.10.39.3.2.1 |
sonetFarEndVTCurrentEntryAn entry in the SONET/SDH Far End VT Current table. SonetFarEndVTCurrentEntry .1.3.6.1.2.1.10.39.3.2.1.1 |
sonetFarEndVTCurrentESsThe counter associated with the number of Far
End Errored Seconds encountered by a SONET/SDH
interface in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.2.1.1.1 |
sonetFarEndVTCurrentSESsThe counter associated with the number of
Far End Severely Errored Seconds
encountered by a SONET/SDH VT interface
in the current 15 minute
interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.2.1.1.2 |
sonetFarEndVTCurrentCVsThe counter associated with the number of
Far End Coding Violations reported via
the far end block error count
encountered by a
SONET/SDH VT interface
in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.2.1.1.3 |
sonetFarEndVTCurrentUASsThe counter associated with the number of
Far End Unavailable Seconds
encountered by a
SONET/SDH VT interface
in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.2.1.1.4 |
sonetFarEndVTIntervalTableThe SONET/SDH Far End VT Interval table. SEQUENCE OF SonetFarEndVTIntervalEntry .1.3.6.1.2.1.10.39.3.2.2 |
sonetFarEndVTIntervalEntryAn entry in the SONET/SDH Far
End VT Interval table. SonetFarEndVTIntervalEntry .1.3.6.1.2.1.10.39.3.2.2.1 |
sonetFarEndVTIntervalNumberA number between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval,
and the interval identified
by N is the interval immediately preceding the
one identified
by N-1. Integer32 .1.3.6.1.2.1.10.39.3.2.2.1.1 |
sonetFarEndVTIntervalESsThe counter associated with the number of
Far End Errored Seconds encountered
by a SONET/SDH VT interface
in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.2.2.1.2 |
sonetFarEndVTIntervalSESsThe counter associated with the number of
Far End Severely Errored Seconds
encountered by a SONET/SDH VT interface
in a particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.2.2.1.3 |
sonetFarEndVTIntervalCVsThe counter associated with the number of
Far End Coding Violations reported via
the far end block error count
encountered by a
SONET/SDH VT interface in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.2.2.1.4 |
sonetFarEndVTIntervalUASsThe counter associated with the number of
Far End Unavailable Seconds
encountered by a
SONET/SDH VT interface in a
particular 15-minute interval
in the past 24 hours.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.2.1.10.39.3.2.2.1.5 |
sonetFarEndVTIntervalValidDataThis variable indicates if the data for this
interval is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.39.3.2.2.1.6 |
sonetConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.4 |
sonetGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.4.1 |
sonetCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.39.4.2 |