ZTSAMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ZTSAMIB.
38
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1 |
tandem OBJECT IDENTIFIER .1.3.6.1.4.1.169 |
nonstopsystems OBJECT IDENTIFIER .1.3.6.1.4.1.169.3 |
ztsa OBJECT IDENTIFIER .1.3.6.1.4.1.169.3.202 |
ztsaAgentNamethe name of the SNMP Agent process.ro DisplayString .1.3.6.1.4.1.169.3.202.1 |
ztsaAgentStatecurrent status of the agent interface. The state of this variable
will always be connected(1) when returned in a management requestro Enumeration .1.3.6.1.4.1.169.3.202.2 |
ztsaProcessNamethe fully qualified NSK process name of this subagent.ro DisplayString .1.3.6.1.4.1.169.3.202.3 |
ztsaProcessVersionthe version of this subagent process object file. Format:
T7862xxx_ddmmmyy_TCPIPSAro DisplayString .1.3.6.1.4.1.169.3.202.4 |
ztsaProgramFilethe TCP/IP subagent program file namero DisplayString .1.3.6.1.4.1.169.3.202.5 |
ztsaProcessPrioritythe current NSK process priority of this subagent process.rw INTEGER .1.3.6.1.4.1.169.3.202.6 |
ztsaProcessGroupIDthe NSK process group ID part of the PAID for this subagent process.ro INTEGER .1.3.6.1.4.1.169.3.202.7 |
ztsaProcessUserIDthe NSK process user ID part of the PAID for this subagent process.ro INTEGER .1.3.6.1.4.1.169.3.202.8 |
ztsaPrimaryCPUThe CPU number of the primary process of this subagentro INTEGER .1.3.6.1.4.1.169.3.202.9 |
ztsaPrimaryPINThe process number of the primary process of this subagentro INTEGER .1.3.6.1.4.1.169.3.202.10 |
ztsaBackupCPUThe CPU the backup process will start in or is running in.
ztsaBackupState must be set to disabled(3) prior to setting this objectrw INTEGER (-1..255) .1.3.6.1.4.1.169.3.202.11 |
ztsaBackupPINThe process number of the backup process of this subagent. Its value
is -1 when the backup is not runningro INTEGER (-1..255) .1.3.6.1.4.1.169.3.202.12 |
ztsaBackupStateThe state of the backup process of this subagent. The settable values
for this object are disabled(3) and enabled(4). The connected(1) and
disconnected(2) states are set by the subagent to reflect the running
state of the backup resourcerw Enumeration .1.3.6.1.4.1.169.3.202.13 |
ztsaSwitchToBackupNowThis object normally reads 0 (autoProcessPairControl) . Setting this
object to 1 (forceBackupTakeover) causes the subagent to switch to its
backup process immediately after replying OK. Setting this object is
only permitted if the ztsaBackupState is connected(1)rw Enumeration .1.3.6.1.4.1.169.3.202.14 |
ztsaEmsCollectorNamethe process name of the EMS Collector the subagent should send
its EMS events to. ztsaEmsCollectorState must be set to disabled(3)
prior to setting this objectrw DisplayString .1.3.6.1.4.1.169.3.202.15 |
ztsaEmsCollectorStateThe state of the connection to the EMS Collector. The settable values
for this object are disabled(3) and enabled(4). The connected(1) and
disconnected(2) states are set by the subagent to reflect the running
state of the EMS collector interfacerw Enumeration .1.3.6.1.4.1.169.3.202.16 |
ztsaKeepAliveTimerThe number of seconds between attempts the subagent makes to connect
to an SNMP Agent, TCP/IP, or restart the backup process.rw INTEGER .1.3.6.1.4.1.169.3.202.17 |
ztsaRefreshNowThis object normally reads 0 (autoDynamicRefresh). Setting this object to
1 (forceDynamicRefresh) causes the subagent to update the MIB tables and
generate traps (if needed). The object will return a value of 1 until the
refresh is complete.rw Enumeration .1.3.6.1.4.1.169.3.202.18 |
ztsaStatsCacheThe cache update interval (in seconds) for SPI STATISTICS command
based objects. Value 0 disables cache timing such that updates occur
to objects derived from STATISTICS only when the ztsaRefreshNow object is setrw INTEGER .1.3.6.1.4.1.169.3.202.19 |
ztsaStatusCacheThe cache update interval (in seconds) for SPI STATUS command based objects.
Value 0 disables cache timing such that updates occur to objects derived
from STATUS only when the ztsaRefreshNow object is set. This value is also used
to control the interval for determining if a linkUp or linkDown trap should be
generatedrw INTEGER .1.3.6.1.4.1.169.3.202.20 |
ztsaInfoCacheThe cache update interval for SPI INFO command based objects. Value 0 disables
cache timing such that updates occur to objects derived from INFO
only when the refreshNow object is setrw INTEGER .1.3.6.1.4.1.169.3.202.21 |
ztsaTcpIpProcessThe TCP/IP process being monitored by the subagent. ztsaTcpIpState must be
set to disabled(3) prior to setting this objectrw DisplayString .1.3.6.1.4.1.169.3.202.22 |
ztsaTcpIpStateThe state of the connection to the monitored TCP/IP process. The settable
values for this object are disabled(3) and enabled(4). The connected(1) and
disconnected(2) states are set by the subagent to reflect the running
state of the TCP/IP resource interfacerw Enumeration .1.3.6.1.4.1.169.3.202.23 |
ztsaScpProcessthe name of the SCP process used for SPI requests. Value is set
by the -scp startup parameter. Default is $ZNETro DisplayString .1.3.6.1.4.1.169.3.202.25 |
ztsaTcpIpTableThis table holds information about the TCP/IP
processes SEQUENCE OF ZtsaTableEntry .1.3.6.1.4.1.169.3.202.26 |
ztsaTableEntryThis entry contains information related to TCP/IP
processes ZtsaTableEntry .1.3.6.1.4.1.169.3.202.26.1 |
ztsaTcpIpNameThe TCP/IP process name monitored by the
TCP/IP SAro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.169.3.202.26.1.1 |
ztsaTcpIpStatusThe status of TCP/IP process monitored by the
TCP/IP SAro Enumeration .1.3.6.1.4.1.169.3.202.26.1.2 |
ztsaSubnetTableThis table holds the subnets information
associated with the TCP/IP processes SEQUENCE OF ZtsaSubnetEntry .1.3.6.1.4.1.169.3.202.27 |
ztsaSubnetEntryThis entry contains information related
to the subnets associated with the TCP/IP processes ZtsaSubnetEntry .1.3.6.1.4.1.169.3.202.27.1 |
ztsaSubnetNameThe Subnet name corresponding to the
TCP/IP process monitored by TCP/IP SAro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.169.3.202.27.1.1 |
ztsaSubnetStatusThe status of the Subnet corresponding to the
TCP/IP process monitored by TCP/IP SAro Enumeration .1.3.6.1.4.1.169.3.202.27.1.2 |
ztsaSubnetAddrThe IP address of the Subnet corresponding
to the TCP/IP process monitored by TCP/IP SAro IpAddress .1.3.6.1.4.1.169.3.202.27.1.3 |