ServerNetPCI-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ServerNetPCI-MIB.
153
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
153 total| Object Name |
|---|
tandem OBJECT IDENTIFIER .1.3.6.1.4.1.169 |
RFC1155-SMI Unknown .1.3.6.1.4.1.169 |
serverNet OBJECT IDENTIFIER .1.3.6.1.4.1.169.8 |
snetAdaptrStatusChangeServerNet Controller Status Change.
The agent has detected a change in the controller
status of a ServerNet Controller. The variable
snetAdaptrStatus indicates the current controller status. TRAP-TYPE .1.3.6.1.4.1.169.8.0.1 |
snetAdaptrXPortStatusChangeServerNet Controller X-Port Status Change.
The agent has detected a change in the controller
status of a the X-Port of the ServerNet Controller. The
variable snetAdaptrXPortStatus indicates the current
X-Port controller status. TRAP-TYPE .1.3.6.1.4.1.169.8.0.2 |
snetAdaptrYPortStatusChangeServerNet Controller Y-Port Status Change.
The agent has detected a change in the controller
status of a the Y-Port of the ServerNet Controller. The
variable snetAdaptrYPortStatus indicates the current
Y-Port controller status. TRAP-TYPE .1.3.6.1.4.1.169.8.0.3 |
snetAdaptrTimeoutErrorsChangeThis trap is obsolete. It is no longer generated.
The trap number is reserved for compatibility. TRAP-TYPE .1.3.6.1.4.1.169.8.0.4 |
pcisnet OBJECT IDENTIFIER .1.3.6.1.4.1.169.8.1 |
snetMibRev OBJECT IDENTIFIER .1.3.6.1.4.1.169.8.1.1 |
snetMibRevMajorThe Major Revision level of the MIB.
A change in the major revision level represents a major change
in the architecture of the MIB. A change in the major revision
level may indicate a significant change in the information
supported and/or the meaning of the supported information.
Correct interpretation of data may require a MIB document with
the same major revision level.ro INTEGER .1.3.6.1.4.1.169.8.1.1.1 |
snetMibRevMinorThe Minor Revision level of the MIB.
A change in the minor revision level may represent some minor
additional support, no changes to any pre-existing information
has occurred.ro INTEGER .1.3.6.1.4.1.169.8.1.1.2 |
snetMibConditionServerNet adapter(s) overall MIB condition.
This represents the overall condition of all ServerNet adapters
installed in the system. The overall condition states are:
other(1)
All ServerNet adapters are OK except for at least 1 is Other.
ok(2)
All ServerNet adapters are OK.
degraded(3)
One or more ServerNet adapters are Degraded.
failed(4)
One or more ServerNet adapters are Failed.ro Enumeration .1.3.6.1.4.1.169.8.1.1.3 |
snetMibPollInterval**NOTE: this object is obsolete.rw INTEGER .1.3.6.1.4.1.169.8.1.1.4 |
snetMibStatusTrapEnableThe snetAdaptrStatusChange Trap Enable/Disable switch.
This defaults to on.rw INTEGER .1.3.6.1.4.1.169.8.1.1.5 |
snetMibXPortTrapEnableThe snetAdaptrXPortStatusChange Trap Enable/Disable switch.
This defaults to on.rw INTEGER .1.3.6.1.4.1.169.8.1.1.6 |
snetMibYPortTrapEnableThe snetAdaptrYPortStatusChange Trap Enable/Disable switch.
This defaults to on.rw INTEGER .1.3.6.1.4.1.169.8.1.1.7 |
snetMibTimeoutErrorTrapEnable**NOTE: this object is obsolete.rwobsolete INTEGER .1.3.6.1.4.1.169.8.1.1.8 |
snetAdaptr OBJECT IDENTIFIER .1.3.6.1.4.1.169.8.1.2 |
snetAdaptrNumberThe number of ServerNet adapters (regardless of state)
present on the system.ro INTEGER .1.3.6.1.4.1.169.8.1.2.1 |
snetAdaptrTableServerNet adapter table. SEQUENCE OF SnetAdaptrEntry .1.3.6.1.4.1.169.8.1.2.2 |
snetAdaptrEntryAn entry containing ServerNet adapter objects. SnetAdaptrEntry .1.3.6.1.4.1.169.8.1.2.2.1 |
snetAdaptrIndexServerNet adapter index.
The adapter index indicates to which ServerNet adapter instance
this table entry belongs.ro INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.1 |
snetAdaptrProductModelA textual string containing the product model name of the
interface.ro DisplayString .1.3.6.1.4.1.169.8.1.2.2.1.2 |
snetAdaptrProductVersionA textual string containing the product version of the
interface.ro DisplayString .1.3.6.1.4.1.169.8.1.2.2.1.3 |
snetAdaptrProductVendorA textual string containing the vendor of the product
interface.ro DisplayString .1.3.6.1.4.1.169.8.1.2.2.1.4 |
snetAdaptrBusSlotThe PCI bus logical slot number of the ServerNet adapter.ro INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.5 |
snetAdaptrSnetIDThe ServerNet ID of the node containing the ServerNet
adapter Port 0. It is displayed as hexadecimal valuero DisplayString .1.3.6.1.4.1.169.8.1.2.2.1.6 |
snetAdaptrMtuThe size of the largest transfer which can be
pushed or pulled on the interface, specified in octets.ro INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.7 |
snetAdaptrStatusServerNet adapter status.
The ServerNet board can be in one of the following states:
other(1)
The controller is in a state other than one of those listed
below.
ok(2)
Indicates normal operating mode. No user action is necessary.
degraded(3)
Indicates either the X-Port or Y-Port has failed but not both.
failed(4)
Indicates that the controller has failed because both ports have
failed or a detectable hardware failure occurred. You should bring
down the server and run Diagnostics to help identify the
problem. The ServerNet adapter may need to be replaced.ro Enumeration .1.3.6.1.4.1.169.8.1.2.2.1.8 |
snetAdaptrAdminStatusReserved for future use.rw Enumeration .1.3.6.1.4.1.169.8.1.2.2.1.9 |
snetAdaptrBTEAvailThe total number of BTE descriptors available.ro INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.10 |
snetAdaptrBTEGaugeThe high watermark of BTE descriptors used. An SNMP set can reset the
high water mark to zero, all other values are not allowed.rw Gauge .1.3.6.1.4.1.169.8.1.2.2.1.11 |
snetAdaptrAVTAvailThe total number of AVT entries available.ro INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.12 |
snetAdaptrAVTGaugeThe high watermark of AVT entries used. An SNMP set can reset the
high water mark to zero, all other values are not allowed.rw Gauge .1.3.6.1.4.1.169.8.1.2.2.1.13 |
snetAdaptrXPortStatusThe current state of the X-Port.
other(1)
The state of the X-Port could not be determined.
ok(2)
Indicates normal operating mode. No user action is necessary.
degraded(3)
Indicates the X-Port is running in a degraded mode.
failed(4)
The X-Port has failed.ro Enumeration .1.3.6.1.4.1.169.8.1.2.2.1.14 |
snetAdaptrYPortStatusThe current state of the Y-Port.
other(1)
The state of the Y-Port could not be determined.
ok(2)
Indicates normal operating mode. No user action is necessary.
degraded(3)
Indicates the Y-Port is running in a degraded mode.
failed(4)
The Y-Port has failed.ro Enumeration .1.3.6.1.4.1.169.8.1.2.2.1.15 |
snetAdaptrPushRequestsLowThe number of requests pushed. Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.16 |
snetAdaptrPushOctetsLowThe number of octets pushed that originate from the local node.
Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.17 |
snetAdaptrPullRequestsLowThe number of calls made to the SPA driver from the client.
Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.18 |
snetAdaptrPullOctetsLowThe number of octets pulled. Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.19 |
snetAdaptrNakErrorsLowThe number of push/pull requests that were received by
the destination but rejected and cannot be completed. Low order 32
bits. This value is combined with snetAdaptrNakErrorsHi to create
a 64 bit value.
The MIB variable snetAdaptrNakErrorsLow is a calculated value. It
is the low order 32 bits of the sum of snetAdaptrXNakErrors,
and snetAdaptrYNakErrors.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.20 |
snetAdaptrTimeoutErrorsLowThe number of push/pull requests that were never
acknowledged and cannot be completed. Low order 32
bits. This value is combined with snetAdaptrTimeoutErrorsHi to create
a 64 bit value.
The MIB variable snetAdaptrTimeoutErrorsLow is a calculated value. It
is the low order 32 bits of the sum of snetAdaptrXTimeoutErrors and
snetAdaptrYTimeoutErrors.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.21 |
snetAdaptrParamErrorsLowThe number of push/pull requests that were never
sent to the destination because of a parameter
programming error and cannot be completed.
Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.22 |
snetAdaptrRemoteErrorsLowThe number of errors that occurred due to remote
push/pull requests.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.23 |
snetAdaptrPushRequestsHiThe number of requests pushed. High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.24 |
snetAdaptrPushOctetsHiThe number of octets pushed that originate from the local node.
High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.25 |
snetAdaptrPullRequestsHiThe number of calls made to the SPA driver from the client.
High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.26 |
snetAdaptrPullOctetsHiThe number of octets pulled. High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.27 |
snetAdaptrNakErrorsHiThe number of push/pull requests that were
received by the destination but rejected and
cannot be completed. High order 32 bits.
This value is combined with snetAdaptrNakErrorsLow to create
a 64 bit value.
The MIB variable snetAdaptrNakErrorsHi is a calculated value. It
is the high order 32 bits of the sum of snetAdaptrXNakErrors and
snetAdaptrYNakErrors.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.28 |
snetAdaptrTimeoutErrorsHiThe number of push/pull requests that were never
acknowledged and cannot be completed. High order
32 bits. This value is combined with snetAdaptrTimeoutErrosHi
to create a 64 bit value.
The MIB variable snetAdaptrTimeoutErrorsHi is a calculated value. It
is the high order 32 bits of the sum of snetAdaptrXTimeoutErrors and
snetAdaptrYTimeoutErrors.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.29 |
snetAdaptrParamErrorsHiThe number of push/pull requests that were never
sent to the destination because of a parameter
programming error and cannot be completed.
High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.30 |
snetAdaptrRemoteErrorsHiThe number of errors that occurred due to remote push/pull
requests. High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.31 |
snetAdaptrXNakErrorsLowThe number of push/pull requests that were
received by the destination but rejected and
cannot be completed on the X port. Low order
32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.32 |
snetAdaptrXNakErrorsHiThe number of push/pull requests that were
received by the destination but rejected and
cannot be completed on the X port. High order
32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.33 |
snetAdaptrYNakErrorsLowThe number of push/pull requests that were
received by the destination but rejected and
cannot be completed on the Y port. Low order
32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.34 |
snetAdaptrYNakErrorsHiThe number of push/pull requests that were
received by the destination but rejected and
cannot be completed on the Y port. High order
32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.35 |
snetAdaptrXTimeoutErrorsLowThe number of push/pull requests that were never
acknowledged and cannot be completed on the X port.
Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.36 |
snetAdaptrXTimeoutErrorsHiThe number of push/pull requests that were never
acknowledged and cannot be completed on the X port.
High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.37 |
snetAdaptrYTimeoutErrorsLowThe number of push/pull requests that were never
acknowledged and cannot be completed on the Y port.
Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.38 |
snetAdaptrYTimeoutErrorsHiThe number of push/pull requests that were never
acknowledged and cannot be completed on the Y port.
High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.39 |
snetAdaptrCauseExceptQueueErrorLowThe total number of push exception queue overflows.
Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.40 |
snetAdaptrCauseExceptQueueErrorHiThe total number of push exception queue overflows.
High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.41 |
snetAdaptrCauseWriteReqOverflowLowThe total number of Write Request Overflows.
Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.42 |
snetAdaptrCauseWriteReqOverflowHiThe total number of Write Request overflows.
High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.43 |
snetAdaptrCauseAccessErrorLowThe total number of Access errors.
Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.44 |
snetAdaptrCauseAccessErrorHiThe total number of Access errors.
High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.45 |
snetAdaptrCauseReadReqOverflowLowThe total number of Read Request Overflows.
Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.46 |
snetAdaptrCauseReadReqOverflowHiThe total number of Read Request Overflows.
High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.47 |
snetAdaptrCauseQueueFullLowThe total number of Interrupt Queue Full Errors.
Low order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.48 |
snetAdaptrCauseQueueFullHiThe total number of Interrupt Queue Full Errors.
High order 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.49 |
snetAdaptrXHaltLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.50 |
snetAdaptrXHaltHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.51 |
snetAdaptrYHaltLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.52 |
snetAdaptrYHaltHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.53 |
snetAdaptrHaltLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.54 |
snetAdaptrHaltHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.55 |
snetAdaptrXLxSecondExceptionsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.56 |
snetAdaptrXLxSecondExceptionsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.57 |
snetAdaptrYLxSecondExceptionsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.58 |
snetAdaptrYLxSecondExceptionsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.59 |
snetAdaptrLxSecondExceptionsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.60 |
snetAdaptrLxSecondExceptionsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.61 |
snetAdaptrXLxCrcErrorsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.62 |
snetAdaptrXLxCrcErrorsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.63 |
snetAdaptrYLxCrcErrorsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.64 |
snetAdaptrYLxCrcErrorsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.65 |
snetAdaptrLxCrcErrorsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.66 |
snetAdaptrLxCrcErrorsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.67 |
snetAdaptrXLxIllegalCommandsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.68 |
snetAdaptrXLxIllegalCommandsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.69 |
snetAdaptrYLxIllegalCommandsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.70 |
snetAdaptrYLxIllegalCommandsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.71 |
snetAdaptrLxIllegalCommandsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.72 |
snetAdaptrLxIllegalCommandsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.73 |
snetAdaptrXLxFifoOverrunLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.74 |
snetAdaptrXLxFifoOverrunHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.75 |
snetAdaptrYLxFifoOverrunLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.76 |
snetAdaptrYLxFifoOverrunHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.77 |
snetAdaptrLxFifoOverrunLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.78 |
snetAdaptrLxFifoOverrunHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.79 |
snetAdaptrXLxKeepAliveErrorsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.80 |
snetAdaptrXLxKeepAliveErrorsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.81 |
snetAdaptrYLxKeepAliveErrorsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.82 |
snetAdaptrYLxKeepAliveErrorsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.83 |
snetAdaptrLxKeepAliveErrorsLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.84 |
snetAdaptrLxKeepAliveErrorsHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.85 |
snetAdaptrXLxEFifoOverflowLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.86 |
snetAdaptrXLxEFifoOverflowHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.87 |
snetAdaptrYLxEFifoOverflowLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.88 |
snetAdaptrYLxEFifoOverflowHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.89 |
snetAdaptrLxEFifoOverflowLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.90 |
snetAdaptrLxEFifoOverflowHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.91 |
snetAdaptrXRecentLxSymbol**NOTE: this object is obsolete.roobsolete INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.92 |
snetAdaptrXPreviousLxSymbol**NOTE: this object is obsolete.roobsolete INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.93 |
snetAdaptrYRecentLxSymbol**NOTE: this object is obsolete.roobsolete INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.94 |
snetAdaptrYPreviousLxSymbol**NOTE: this object is obsolete.roobsolete INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.95 |
snetAdaptrIntrPktDroppedLow**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.96 |
snetAdaptrIntrPktDroppedHi**NOTE: this object is obsolete.roobsolete Counter .1.3.6.1.4.1.169.8.1.2.2.1.97 |
snetAdaptrBteDoneInterrupts1LowThe count of bte done interrupts for each BTEqueue.
Low 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.98 |
snetAdaptrBteDoneInterrupts1HiThe count of bte done interrupts for each BTEqueue.
High 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.99 |
snetAdaptrBteDoneInterrupts2LowThe count of bte done interrupts for each BTEqueue.
Low 32 bits..ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.100 |
snetAdaptrBteDoneInterrupts2HiThe count of bte done interrupts for each BTEqueue.
High 32 bits.ro Counter .1.3.6.1.4.1.169.8.1.2.2.1.101 |
snetAdaptrNodeMfgIdNode Manufacturing IDro INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.102 |
snetAdaptrNodePartNumberNode Part Numberro INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.103 |
snetAdaptrNodeSerialNumberNode Serial Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.169.8.1.2.2.1.104 |
snetAdaptrSnetID1The ServerNet ID of the node containing the ServerNet
adapter Port 1. It is displayed as hexadecimal valuero DisplayString .1.3.6.1.4.1.169.8.1.2.2.1.105 |
snetAdaptrRevMajorAdapter driver major revision levelro INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.106 |
snetAdaptrRevMinorAdapter driver minor revision levelro INTEGER .1.3.6.1.4.1.169.8.1.2.2.1.107 |
snetAdaptrNeighborTableServerNet adapter neighboring data. SEQUENCE OF SnetAdaptrNeighborEntry .1.3.6.1.4.1.169.8.1.2.3 |
snetAdaptrNeighborEntryAn entry containing ServerNet adapter neighbor data. SnetAdaptrNeighborEntry .1.3.6.1.4.1.169.8.1.2.3.1 |
snetAdaptrNeighborIndexServerNet adapter neighbor data index.
Indicates the port the neighbor is
connected to.ro INTEGER .1.3.6.1.4.1.169.8.1.2.3.1.1 |
snetAdaptrNeighborNodeTypeServerNet adapter's neighbor Node type.
Valid values are
Unknown(1),
End Node(2),
Auto-Configured IO(3),
Manual-Configutred IO(4),
Switch(5)ro Enumeration .1.3.6.1.4.1.169.8.1.2.3.1.2 |
snetAdaptrNeighborflStateServerNet adapter's neighbor node state.
Valid values are
unConfigured(1),
configured(2)ro Enumeration .1.3.6.1.4.1.169.8.1.2.3.1.3 |
snetAdaptrNeighborflAttribServerNet adapter's neighbor node attributes.(Not supported)ro INTEGER .1.3.6.1.4.1.169.8.1.2.3.1.4 |
snetAdaptrNeighborNodeIdServerNet adapter's neighbor node High level Id.ro DisplayString .1.3.6.1.4.1.169.8.1.2.3.1.5 |
snetAdaptrNeighborNameServerNet adapter's neighbor node name.ro DisplayString .1.3.6.1.4.1.169.8.1.2.3.1.6 |
snetAdaptrNeighborDomainServerNet adapter's neighbor node Domain.(Not supported.)ro DisplayString .1.3.6.1.4.1.169.8.1.2.3.1.7 |
snetAdaptrNeighborMfgIdServerNet adapter's neighbor node manufacturing ID.ro INTEGER .1.3.6.1.4.1.169.8.1.2.3.1.8 |
snetAdaptrNeighborPartNumberServerNet adapter's neighbor node part number.ro INTEGER .1.3.6.1.4.1.169.8.1.2.3.1.9 |
snetAdaptrNeighborSerialNumberServerNet adapter's neighbor node serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.169.8.1.2.3.1.10 |
snetAdaptrNeighborFabricServerNet adapter's neighbor node fabric.
Valid values are
1 = X Fabric
2 = Y Fabric
3 = both Fabrics
4 = Not Definedro Enumeration .1.3.6.1.4.1.169.8.1.2.3.1.11 |
snetAdaptrNodeIDTableServerNet adapter node ID table. SEQUENCE OF SnetAdaptrNodeIDEntry .1.3.6.1.4.1.169.8.1.2.4 |
snetAdaptrNodeIDEntryAn entry containing ServerNet adapter node ID data. SnetAdaptrNodeIDEntry .1.3.6.1.4.1.169.8.1.2.4.1 |
snetAdaptrNodeIDIndexServerNet node data index.
The adapter index indicates which ServerNet adapter data instance
this table entry belongs.ro INTEGER .1.3.6.1.4.1.169.8.1.2.4.1.1 |
snetAdapterNodeIDServerNet Node ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.169.8.1.2.4.1.2 |
snetAdaptrOsCommonGroup OBJECT IDENTIFIER .1.3.6.1.4.1.169.8.1.3 |
snetAdaptrOsCommonModuleTableA table of software modules that provide an interface to the
ServerNet adapter. SEQUENCE OF SnetAdaptrOsCommonModuleEntry .1.3.6.1.4.1.169.8.1.3.1 |
snetAdaptrOsCommonModuleEntryA description of software modules that provide an interface
to the ServerNet adapter. SnetAdaptrOsCommonModuleEntry .1.3.6.1.4.1.169.8.1.3.1.1 |
snetAdaptrOsCommonModuleIndexA unique index for the module description.ro INTEGER .1.3.6.1.4.1.169.8.1.3.1.1.1 |
snetAdaptrOsCommonModuleNameThe module name.ro DisplayString .1.3.6.1.4.1.169.8.1.3.1.1.2 |
snetAdaptrOsCommonModuleVersionThe module version in XX.YY format.
XX is the major version and YY is the minor version number.
This field will be a null (size 0) string if the agent cannot
provide the module version.ro DisplayString .1.3.6.1.4.1.169.8.1.3.1.1.3 |
snetAdaptrOsCommonModuleDateThe module date.
field octets contents range
===== ====== ======== =====
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minute 0..59
6 7 second 0..60
(use 60 for leap second)
This field will be set to year = 0 if the agent cannot provide
the module date. The hour, minute, and second field will be set
to zero (0) if they are not relevant. The year field is set
with the most significant octet first.ro OCTET STRING .1.3.6.1.4.1.169.8.1.3.1.1.4 |
snetAdaptrOsCommonModulePurposeThe purpose of the module described in this entry.ro DisplayString .1.3.6.1.4.1.169.8.1.3.1.1.5 |