XYPLEX-HUB-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
21
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
xyplex OBJECT IDENTIFIER .1.3.6.1.4.1.33 |
SNMPv2-TC Unknown .1.3.6.1.4.1.33 |
hub OBJECT IDENTIFIER .1.3.6.1.4.1.33.9 |
hubTwistedPairPortNumberThe number of twisted-pair hub ports. By
convention, these are the lower numbered hub ports.
Corresponds indirectly to the numbered, twisted-pair
port numbers labeled 'Port' in the SHOW HUB SUMMARY
display.ro Unknown .1.3.6.1.4.1.33.9.1 |
hubNonTwistedPairPortNumberThe number of non-twisted-pair hub ports. By
convention, these are the higher numbered hub ports.
Corresponds indirectly to the unnumbered,
non-twisted-pair ports in the SHOW HUB SUMMARY
display.ro INTEGER .1.3.6.1.4.1.33.9.2 |
hubPortTableA list of hub Ethernet port entries. SEQUENCE OF HubPortEntry .1.3.6.1.4.1.33.9.3 |
hubPortEntryHub parameter values for an Ethernet port. HubPortEntry .1.3.6.1.4.1.33.9.3.1 |
hubPortIndexAn index value that uniquely identifies a port.
The port identified by a particular value of this
index is the same port as identified by portBasicID
in hmBasicPortTable in the IEEE Hub MIB [11].
Corresponds directly to the numbered, twisted-pair
port numbers labeled 'port' and indirectly to the
unnumbered, non-twisted-pair ports in the SHOW HUB
SUMMARY display.ro INTEGER .1.3.6.1.4.1.33.9.3.1.1 |
hubPortNameAn administratively assigned name for a
twisted-pair port, typically with some local
significance. Corresponds directly to PORT NAME and
the value labeled 'Name' in the SHOW HUB SUMMARY
display.rw DisplayString .1.3.6.1.4.1.33.9.3.1.2 |
hubPortAutoPolarityA control for automatic determination of
twisted-pair port polarity. 'disabled' locks the
port into positive polarity. 'enabled' allows the
hub to sense polarity and adapt accordingly.
Corresponds directly to PORT POLARITY and the value
labeled 'Auto Polarity:' in the PORT display.rw Enumeration .1.3.6.1.4.1.33.9.3.1.3 |
hubPortSensedPolarityPolarity of a twisted-pair port. Corresponds
directly to PORT POLARITY and the value labeled
'Polarity:' in the HUB SUMMARY display.ro Enumeration .1.3.6.1.4.1.33.9.3.1.4 |
hubPortPulseA control for periodic, automatic generation of a
test pulse on a twisted-pair port. Corresponds
directly to PORT TEST PULSE and the value labeled
'Test Pulse:' in the PORT display.rw Enumeration .1.3.6.1.4.1.33.9.3.1.5 |
hubPortPulseStatusStatus of the last attempt to generate and detect a
test pulse. Corresponds directly to the value
labeled 'STATUS' and 'Test Pulse:' in the PORT
display.ro Enumeration .1.3.6.1.4.1.33.9.3.1.6 |
hubPortMissedPulsesNumber of times that a generated test pulse was not
seen in return. Corresponds directly to the value
labeled 'Test Pulse Lost:' in the PORT display.ro Counter .1.3.6.1.4.1.33.9.3.1.7 |
hubPortJabbersNumber of times that a received frame was
terminated by the jabber timer. Corresponds
directly to the value labeled 'Jabbers:' in the PORT
display.ro Counter .1.3.6.1.4.1.33.9.3.1.8 |
hubPortBadPreamblesNumber of times that two one bits (Start of Frame)
did not follow an interpacket gap and alternating
one and zero bits. Corresponds directly to the
value labeled 'SOF Missing:' in the PORT display.ro Counter .1.3.6.1.4.1.33.9.3.1.9 |
hubPortBitRateErrorsNumber of times that bits were received with
improper timing. Corresponds directly to the value
labeled 'Out of Spec. Bit Rate:' in the PORT
display.ro Counter .1.3.6.1.4.1.33.9.3.1.10 |
hubPortLateCollisionsNumber of times that a frame collision came after
the allowed collision window. Corresponds directly
to the value labeled 'Late Collisions:' in the PORT
display.ro Counter .1.3.6.1.4.1.33.9.3.1.11 |
hubPortNormalCollisionsNumber of times that a frame collision came within
the allowed collision window. Corresponds directly
to the value labeled 'Collisions:' in the PORT
display.ro Counter .1.3.6.1.4.1.33.9.3.1.12 |
hubPortZeroControl to zero counters kept for the port. In
response to a get-request or get-next-request, the
agent always returns 'ready' for this value.
Setting the value to 'ready' has no effect. Setting
it to 'execute' causes all the system's counters to
be zeroed. Corresponds to the ZERO PORT command.rw Enumeration .1.3.6.1.4.1.33.9.3.1.13 |
hubPortZeroTimeThe number of hundredths of a second since the most
recent zeroing of the counters kept for the port,
such as through execution of sysZeroAll or
hubPortZero. Corresponds directly to the value
labeled 'Since Zeroed:' in the PORT COUNTERS
display.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33.9.3.1.14 |