XEDIA-RIP-MIB
The XEDIA-RIP-MIB extends standard RIPv2 management capabilities to monitor and configure Routing Information Protocol instances specifically on Xedia hardware platforms. It provides vendor-specific objects for tracking RIP neighbor states, route table entries, and protocol parameters that exceed the scope of the IETF RIPv2-MIB.
Imported Objects
Objects
13 total| Object Name |
|---|
xediaRipMIBThis module defines additional objects for management of RIP
in Xedia devices, above and beyond what is defined in the
IETF's RIPv2-MIB. MODULE-IDENTITY .1.3.6.1.4.1.838.3.5 |
xripObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.5.1 |
xripAdminStatThe administrative status of RIP in the router. The value
'enabled(1)' indicates that the RIP process is active on
at least one interface; 'disabled(2)' indicates it is
disable on all interfaces.rw Enumeration .1.3.6.1.4.1.838.3.5.1.1 |
xripImportAdminThe control for enabling and disabling importing of metrics.rw Enumeration .1.3.6.1.4.1.838.3.5.1.2 |
xripImportMetricThe import metric value used.rw INTEGER .1.3.6.1.4.1.838.3.5.1.3 |
xripUpdateTimerThe time between updates in seconds.rw INTEGER .1.3.6.1.4.1.838.3.5.1.4 |
xRip2XIfConfTableA list of interface entries. The number of entries
is given by the value of ifNumber. This table
contains additional objects for the interface table. SEQUENCE OF XRip2XIfConfEntry .1.3.6.1.4.1.838.3.5.1.10 |
xRip2XIfConfEntryAn entry containing additional management information
applicable to a particular Rip2 interface. XRip2XIfConfEntry .1.3.6.1.4.1.838.3.5.1.10.1 |
xrip2IfConfSlowConvergenceTechniqueThe method used to inform other routers about routes.rw Enumeration .1.3.6.1.4.1.838.3.5.1.10.1.1 |
xrip2IfConfTriggerEventsThe object used to control the sending of Rip triggered
events.rw Enumeration .1.3.6.1.4.1.838.3.5.1.10.1.2 |
xripConformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.5.2 |
xripCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.5.2.1 |
xripGroups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.5.2.2 |
More MIBs from Xedia
Browse all XediaMIBs →The XEDIA-SYSTEM-MIB provides SNMP objects to monitor and manage system-level parameters, including hardware status, resource utilization, and operational state, specifically for Xedia embedded networking devices.
The XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB provides management objects for monitoring and configuring Xedia's proprietary Network Address Translator (NAT) devices, enabling the tracking of translation sessions, address pool utilization, and packet flow statistics between RFC1918 private networks and the public Internet.
The XEDIA-POLICY-MIB enables SNMP-based configuration and monitoring of routing policy definitions, including match conditions, action sets, and policy application states, specifically within Xedia networking hardware. This module provides granular visibility into the operational status and parameter values of traffic steering rules to facilitate automated policy enforcement and troubleshooting.
The XEDIA-IPSEC-MIB enables monitoring and configuration of Xedia IPsec VPN tunnel states, security associations, and cryptographic parameters on Xedia networking hardware. It provides specific objects for tracking tunnel establishment status, packet counters, and IPsec policy enforcement metrics to ensure secure data transmission integrity.
The XEDIA-IP-MIB extends standard IETF IP-MIB functionality to monitor and manage IP-layer parameters, interfaces, and routing statistics specifically within Xedia hardware platforms. This module provides vendor-specific object identifiers for tracking IP traffic counters, interface states, and protocol configurations on Xedia network devices.
The XEDIA-NETWORK-TIME-PROTOCOL-MIB enables monitoring of Xedia's RFC 1305-compliant Network Time Protocol (NTP) implementation to manage UTC synchronization states, server association parameters, and time offset metrics across network hosts.