XEDIA-DS1-MIB
AI MIB Summary
The XEDIA-DS1-MIB extends standard DS1 management capabilities to monitor T1/E1 link performance and interface states on Xedia hardware, providing vendor-specific counters and status objects beyond the scope of the standard DS1-MIB.
This module defines additional objects for management of DS1 links in Xedia devices, above and beyond what is defined in the standard DS1 mib, and proposed drafts.
Main OID:
xediaDs1MIB.1.3.6.1.4.1.838.3.18
52
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
xediaDs1MIBThis module defines additional objects for management of DS1
links in Xedia devices, above and beyond what is defined in the
standard DS1 mib, and proposed drafts. MODULE-IDENTITY .1.3.6.1.4.1.838.3.18 |
xDs1Objects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.18.1 |
xDs1Tables OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.18.2 |
xDsx1ConfigTableThe Xedia DS1 Config table contains extensions to
the DS1 Config table. SEQUENCE OF XDsx1ConfigEntry .1.3.6.1.4.1.838.3.18.2.1 |
xDsx1ConfigEntryAn entry in the Xedia DS1 Config table. XDsx1ConfigEntry .1.3.6.1.4.1.838.3.18.2.1.1 |
xdsx1LineStatusIndicates the line status of the interface. This obect
is identical to dsx1LineStatus in the DS1 MIB except
that it uses the SNMPv2 BIT STRING object type.ro XDsx1LineStatus .1.3.6.1.4.1.838.3.18.2.1.1.1 |
xdsx1LoopbackStatusIndicates the local and remote loopback status of the
interface. This object is identical to dsx1LoopbackStatus
in the DS1 MIB except that it uses the SNMPv2 BIT STRING
object type.ro BIT STRING { noLoopback(0), remotePayloadOrigNearEnd(1), remotelLineOrigNearEnd(2), localFramerOrigNearEnd(3), localAnalogOrigNearEnd(4), remotePayloadOrigFarEnd(5), remotelLineOrigFarEnd(6), localFramerOrigFarEnd(7), localAnalogOrigFarEnd(8) } .1.3.6.1.4.1.838.3.18.2.1.1.2 |
xdsx1CfgCrcModeThe configured CRC mode of the interface.rw Enumeration .1.3.6.1.4.1.838.3.18.2.1.1.3 |
xdsx1CfgLineBuildOutThe line buildout of the ds1.rw Enumeration .1.3.6.1.4.1.838.3.18.2.1.1.4 |
xdsx1CfgLineInterfaceThe line buildout of the ds1.rw Enumeration .1.3.6.1.4.1.838.3.18.2.1.1.5 |
xdsx1CfgInsertTVerrsThe number of Line Code Violation (LCV) errors to inject.rw Integer32 .1.3.6.1.4.1.838.3.18.2.1.1.6 |
xdsx1CfgInsertTFerrsThe number of Frame Bit (FBE) errors to inject.rw Integer32 .1.3.6.1.4.1.838.3.18.2.1.1.7 |
xdsx1CfgInsertTCerrsThe number of Checksum (CRC) errors to inject.rw Integer32 .1.3.6.1.4.1.838.3.18.2.1.1.8 |
xdsx1CfgInsertTBerrsThe number of PRBS errors to inject.rw Integer32 .1.3.6.1.4.1.838.3.18.2.1.1.9 |
xdsx1CfgChannelMaskThe number of PRBS errors to inject.rw BIT STRING { c0(0), c1(1), c2(2), c3(3), c4(4), c5(5), c6(6), c7(7), c8(8), c9(9), c10(10), c11(11), c12(12), c13(13), c14(14), c15(15), c16(16), c17(17), c18(18), c19(19), c20(20), c21(21), c22(22), c23(23), c24(24), c25(25), c26(26), c27(27), c28(28), c29(29), c30(30), c31(31) } .1.3.6.1.4.1.838.3.18.2.1.1.10 |
xdsx1OutOfFramesThe number of 'out of frame' errors.ro Counter32 .1.3.6.1.4.1.838.3.18.2.1.1.11 |
xdsx1ChangeOfFrameAlignmentThe number of times frames changed alignment.ro Counter32 .1.3.6.1.4.1.838.3.18.2.1.1.12 |
xdsx1CfgLoopbackConfigThis variable represents the loopback configuration of
the DS1 interface. Agents supporting read/write access
should return badValue in response to a requested loopback
state that the interface does not support. The values mean:
xdsx1NoLoop
Not in the loopback state. A device that
is not capable of performing a loopback on
the interface shall always return this as
it's value.
xdsx1PayloadLoop
The received signal at this interface is
looped through the device. Typically the
received signal is looped back for re-
transmission after it has passed through
the device's framing function.
xdsx1LineLoop
The received signal at this interface does
not go through the device (minimum pene-
tration) but is looped back out.
xdsx1Framer
xdsx1Analogrw Enumeration .1.3.6.1.4.1.838.3.18.2.1.1.13 |
xdsx1CfgTestCodeThis variable indicates what type of code is
being sent across the DS1 interface by the dev-
ice. The values mean:
xdsx1SendNone - sending looped or normal data
xdsx1PRBS2E11 - E11,
f - framed-mode
z - zero-limit mode
fz - framed-mode and zero-limit mode
xdsx1PRBS2E15 - E15,
f - framed-mode
z - zero-limit mode
fz - framed-mode and zero-limit mode
xdsx1PRBS2E20 - E20,
f - framed-mode
z - zero-limit mode
fz - framed-mode and zero-limit mode
xdsx1PRBS2E23 - E23,
f - framed-mode
z - zero-limit mode
fz - framed-mode and zero-limit moderw Enumeration .1.3.6.1.4.1.838.3.18.2.1.1.14 |
xdsx1CfgLineCharacteristicsThe valid combinations of interface type, and buildout for
the circuit.rw Enumeration .1.3.6.1.4.1.838.3.18.2.1.1.15 |
xdsx1CfgLineTypeThe line type of the circuit.rw Enumeration .1.3.6.1.4.1.838.3.18.2.1.1.16 |
xdsx1CfgLineCodingThe line coding of the circuit.rw Enumeration .1.3.6.1.4.1.838.3.18.2.1.1.17 |
xDsx1CurrentTableThe Xedia DS1 Current table contains extensions to
the DS1 Current table which includes statistics
being collected for the current 15 minute interval. SEQUENCE OF XDsx1CurrentEntry .1.3.6.1.4.1.838.3.18.2.2 |
xDsx1CurrentEntryAn entry in the Xedia DS1 Current table. XDsx1CurrentEntry .1.3.6.1.4.1.838.3.18.2.2.1 |
xdsx1CurrentFBEsThe number of F Bit Errores encountered during the
current 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.2.1.1 |
xdsx1CurrentFEBEsThe number of Far End Block Errors encountered
in the current 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.2.1.2 |
xdsx1CurrentCRCEsThe number of CRC errors encountered during the
current 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.2.1.3 |
xdsx1CurrentLCEsThe number of Line Coding Errors encountered during
the current 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.2.1.4 |
xdsx1CurrentBEsThe number of Bit Errors encountered during
the current 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.2.1.5 |
xdsx1CurrentSlipsThe number of rx/tx slips encountered during
the current 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.2.1.6 |
xdsx1CurrentLineStatusThe bitwise ORing of the dsx1LineStatus values (line
status) encountered during the current 15
minute interval. This object is useful in identifying
all xdsx1LineStatus conditions which occured during
the interval including the NO_ALARM condition.ro XDsx1LineStatus .1.3.6.1.4.1.838.3.18.2.2.1.7 |
xDsx1IntervalTableThe Xedia DS1 Interval Table contains extensions to
the DS1 Interval table which includes statistics
collected over the previous 24 hours of operation.
The past 24 hours are broken into 96 completed 15
minute intervals. SEQUENCE OF XDsx1IntervalEntry .1.3.6.1.4.1.838.3.18.2.3 |
xDsx1IntervalEntryAn entry in the Xedia DS1 Interval Table. XDsx1IntervalEntry .1.3.6.1.4.1.838.3.18.2.3.1 |
xdsx1IntervalFBEsThe number of F Bit Errores encountered during the
specified 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.3.1.1 |
xdsx1IntervalFEBEsThe number of Far End Block Errors encountered
in the specified 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.3.1.2 |
xdsx1IntervalCRCEsThe number of CRC errors encountered during the
specified 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.3.1.3 |
xdsx1IntervalLCEsThe number of Line Coding Errors encountered during
the specified 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.3.1.4 |
xdsx1IntervalBEsThe number of Bit Errors encountered during
the specified 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.3.1.5 |
xdsx1IntervalSlipsThe number of rx/tx slips encountered during
the specified 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.3.1.6 |
xdsx1IntervalLineStatusThe bitwise ORing of the dsx1LineStatus values (line
status) encountered during the specified 15
minute interval. This object is useful in identifying
all xdsx1LineStatus conditions which occured during
the interval including the NO_ALARM condition.ro XDsx1LineStatus .1.3.6.1.4.1.838.3.18.2.3.1.7 |
xDsx1TotalTableThe Xedia DS1 Total Table contains extensions to the
DS1 Total table which includes cumulative sums of the
various statistics for the 24 hour period preceding
the current interval. Invalid 15 minute intervals count
as 0. SEQUENCE OF XDsx1TotalEntry .1.3.6.1.4.1.838.3.18.2.4 |
xDsx1TotalEntryAn entry in the Xedai DS1 Total Table. XDsx1TotalEntry .1.3.6.1.4.1.838.3.18.2.4.1 |
xdsx1TotalFBEsThe sum of F Bit Errores encountered during
all 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.4.1.1 |
xdsx1TotalFEBEsThe sum of Far End Block Errors encountered for all
of the 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.4.1.2 |
xdsx1TotalCRCEsThe sum of CRC errors encountered for all
of the 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.4.1.3 |
xdsx1TotalLCEsThe sum of Line Coding Errors encountered for all
of the 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.4.1.4 |
xdsx1TotalBEsThe sum of Bit Errors encountered during
of the 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.4.1.5 |
xdsx1TotalSlipsThe sum of rx/tx slips encountered during
of the 15 minute interval.ro Counter32 .1.3.6.1.4.1.838.3.18.2.4.1.6 |
xdsx1TotalLineStatusThe bitwise ORing of the dsx1LineStatus values (line
status) encountered during all of the 15
minute intervals. This object is useful in identifying
all xdsx1LineStatus conditions which occured during
the full range of intervals including the NO_ALARM condition.ro XDsx1LineStatus .1.3.6.1.4.1.838.3.18.2.4.1.7 |
xDs1Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.18.3 |
xDs1Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.18.3.1 |
xDs1Groups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.18.3.2 |