WRED-MIB
.
Main OID:
swWredMIB.1.3.6.1.4.1.171.12.31
35
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
swWredMIB. MODULE-IDENTITY .1.3.6.1.4.1.171.12.31 |
swWredCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.31.1 |
swWredGlobalStateThis object enable\disable the WRED state of the device.rw Enumeration .1.3.6.1.4.1.171.12.31.1.1 |
swWredInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.31.2 |
swWredMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.31.3 |
swWredAverageTimeTableA table that contains WRED average time for each port. SEQUENCE OF SwWredAverageTimeEntry .1.3.6.1.4.1.171.12.31.3.1 |
swWredAverageTimeEntryA list that contains WRED average time per port. SwWredAverageTimeEntry .1.3.6.1.4.1.171.12.31.3.1.1 |
swWredPortIndexThis object indicates the port number.ro INTEGER .1.3.6.1.4.1.171.12.31.3.1.1.1 |
swWredAverageTimeThis object indicates the time in microseconds used in average queue depth calculation (1-32768).rw INTEGER .1.3.6.1.4.1.171.12.31.3.1.1.2 |
swWredCtrlTableA table that contains WRED drop setting for each port. SEQUENCE OF SwWredCtrlEntry .1.3.6.1.4.1.171.12.31.3.2 |
swWredCtrlEntryA list that contains WRED drop setting per port. SwWredCtrlEntry .1.3.6.1.4.1.171.12.31.3.2.1 |
swWredCtrlPortIndexThis object indicates the port number.ro INTEGER .1.3.6.1.4.1.171.12.31.3.2.1.1 |
swWredCtrlClassIndexThis object indicates the cos queue number (0-7).ro INTEGER .1.3.6.1.4.1.171.12.31.3.2.1.2 |
swWredCtrlDropStartThis object indicates the percentage of queue size to start dropping (0-100).rw INTEGER .1.3.6.1.4.1.171.12.31.3.2.1.3 |
swWredCtrlDropSlopeThis object indicates the Degrees (0..90) describing the drop probability slope (0-90). When set the slope zero, it like disable the wred of the cos queue.rw INTEGER .1.3.6.1.4.1.171.12.31.3.2.1.4 |
swWredAllPortAverageTimeThis object configure the time in microseconds used in average queue depth calculation (1-32768) to all port. This return value while read request will be always 0.rw INTEGER .1.3.6.1.4.1.171.12.31.3.3 |
swWredProfileTableA table that contains WRED Profile Entrys. SEQUENCE OF SwWredProfileEntry .1.3.6.1.4.1.171.12.31.3.4 |
swWredProfileEntryA list that contains WRED profile entrys. SwWredProfileEntry .1.3.6.1.4.1.171.12.31.3.4.1 |
swWredProfileIndexThis object indicates the profile number,the minimum value should be 2 and the maximum value is depended on project.ro INTEGER .1.3.6.1.4.1.171.12.31.3.4.1.1 |
swWredProfileNameThis object indicates the profile name,The profile name can not be same.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.12.31.3.4.1.2 |
swWredProfileRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.31.3.4.1.3 |
swWredProfileCfgTableA table that contains WRED profile every parameter. SEQUENCE OF SwWredProfileCfgEntry .1.3.6.1.4.1.171.12.31.3.5 |
swWredProfileCfgEntryA list that contains WRED profile parameter for each profile. SwWredProfileCfgEntry .1.3.6.1.4.1.171.12.31.3.5.1 |
swWredProfileCfgIndexThis object indicates the profile number.ro INTEGER .1.3.6.1.4.1.171.12.31.3.5.1.1 |
swWredProfileCfgPacketTypeThis object indicates the profile packet type.ro Enumeration .1.3.6.1.4.1.171.12.31.3.5.1.2 |
swWredProfileCfgPacketColorThis object indicates the profile packet color.ro Enumeration .1.3.6.1.4.1.171.12.31.3.5.1.3 |
swWredProfileCfgMinThresholdThis object indicates the percentage of queue size to start dropping (0-100).rw INTEGER .1.3.6.1.4.1.171.12.31.3.5.1.4 |
swWredProfileCfgMaxThresholdThis object indicates the percentage of queue size over which WRED will drop all packets (0-100).rw INTEGER .1.3.6.1.4.1.171.12.31.3.5.1.5 |
swWredProfileCfgMaxDropRateThis object indicates the drop probability that the percentage of queue size reaches max threshold.rw INTEGER .1.3.6.1.4.1.171.12.31.3.5.1.6 |
swWredPortProfileTableA table that contains ports WRED profile binded. SEQUENCE OF SwWredPortProfileEntry .1.3.6.1.4.1.171.12.31.3.6 |
swWredPortProfileEntryA list that contains port and WRED profile id. SwWredPortProfileEntry .1.3.6.1.4.1.171.12.31.3.6.1 |
swWredPortProfilePortIndexThis object indicates the port number.ro INTEGER .1.3.6.1.4.1.171.12.31.3.6.1.1 |
swWredPortProfileClassIndexThis object indicates the hardware priority queue number (0-7).ro INTEGER .1.3.6.1.4.1.171.12.31.3.6.1.2 |
swWredPortProfileIdThis object indicates profile ID that port and queue binded, the minimum value should be 1 and the maximum is depended on project.rw INTEGER .1.3.6.1.4.1.171.12.31.3.6.1.3 |
swWredPortWeightNumThis object indicates weight number that port and queue set, the minimum value should be 1 and the maximum is depended on project.rw INTEGER .1.3.6.1.4.1.171.12.31.3.6.1.4 |
More MIBs from D-Link
Browse all D-LinkMIBs →DGS-1210-28XME-BX
SNMP MIB module
2033 objects→
DGS-1210-12TSME-BX
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
2030 objects→
DGS-1210-28XSME-BX
SNMP MIB module
2016 objects→
DGS-1210-28PME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
1942 objects→
DGS-1210-28ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
1941 objects→
DGS-1210-20ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.
1941 objects→