WINS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for WINS-MIB.
78
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
78 total| Object Name |
|---|
wins OBJECT IDENTIFIER .1.3.6.1.4.1.318.1.2.2 |
par OBJECT IDENTIFIER .1.3.6.1.4.1.318.1.2.2.1 |
parWinsStartTimeWins start timero DisplayString .1.3.6.1.4.1.318.1.2.2.1.1 |
parLastPScvTimeMost recent date and time at which planned scavenging
took place. Planned scavenging happens at intervals
specified in the registry. Scavenging involves
changing owned non-refreshed entries to the released
state. Further, replicas may be changed to tombstones,
tombstones maye be deleted and revalidation of old
replicas may take placero DisplayString .1.3.6.1.4.1.318.1.2.2.1.2 |
parLastATScvTimeMost recent data and time at which scavenging as a
result of administrative action took placero DisplayString .1.3.6.1.4.1.318.1.2.2.1.3 |
parLastTombScvTimeMost recent data and time at which replica tombstone
scavenging took placero DisplayString .1.3.6.1.4.1.318.1.2.2.1.4 |
parLastVerifyScvTimeMost recent data and time at which revalidation of
old active replicas took placero DisplayString .1.3.6.1.4.1.318.1.2.2.1.5 |
parLastPRplTimeMost recent data and time at which planned replication
took place. Planned replication happens at intervals
specified in the registryro DisplayString .1.3.6.1.4.1.318.1.2.2.1.6 |
parLastATRplTimeMost recent data and time at which administrator
triggered replication took place.ro DisplayString .1.3.6.1.4.1.318.1.2.2.1.7 |
parLastNTRplTimeMost recent data and time at which network triggered
replication took place. Network triggered replication
happens as a result of an update notification message
from a remote WINSro DisplayString .1.3.6.1.4.1.318.1.2.2.1.8 |
parLastACTRplTimeMost recent data and time at which address change
triggered replication took place. Address change
triggered replication happens when the address of
an owned name changes due to a new registrationro DisplayString .1.3.6.1.4.1.318.1.2.2.1.9 |
parLastInitDbTimeMost recent data and time at which the local database
was populated statically from one or more data filesro DisplayString .1.3.6.1.4.1.318.1.2.2.1.10 |
parLastCounterResetTimeMost recent data and time at which the local counters
were initialized to zeroro DisplayString .1.3.6.1.4.1.318.1.2.2.1.11 |
parWinsTotalNoOfRegThis variable indicates the number of
registrations receivedro Counter .1.3.6.1.4.1.318.1.2.2.1.12 |
parWinsTotalNoOfQueriesThis variable indicates the number of
queries receivedro Counter .1.3.6.1.4.1.318.1.2.2.1.13 |
parWinsTotalNoOfRelThis variable indicates the number of
releases receivedro Counter .1.3.6.1.4.1.318.1.2.2.1.14 |
parWinsTotalNoOfSuccRelThis variable indicates the number of
releases that succeededro Counter .1.3.6.1.4.1.318.1.2.2.1.15 |
parWinsTotalNoOfFailRelThis variable indicates the number of
releases that failedro Counter .1.3.6.1.4.1.318.1.2.2.1.16 |
parWinsTotalNoOfSuccQueriesThis variable indicates the number of
queries that succeededro Counter .1.3.6.1.4.1.318.1.2.2.1.17 |
parWinsTotalNoOfFailQueriesThis variable indicates the number of
queries that failedro Counter .1.3.6.1.4.1.318.1.2.2.1.18 |
parRefreshIntervalThis variable indicates the refresh interval.
Unit is in millisecondsrw INTEGER .1.3.6.1.4.1.318.1.2.2.1.19 |
parTombstoneIntervalThis variable indicates the tombstone interval,
Unit is in millisecondsrw INTEGER .1.3.6.1.4.1.318.1.2.2.1.20 |
parTombstoneTimeoutThis variable indicates the tombstone timeout.
Unit is in millisecondsrw INTEGER .1.3.6.1.4.1.318.1.2.2.1.21 |
parVerifyIntervalThis variable indicates the verify interval
Unit is in milliseconds.rw INTEGER .1.3.6.1.4.1.318.1.2.2.1.22 |
parVersCounterStartValLowWordThis variable indicates the low word of the
version counter that WINS should start withrw Counter .1.3.6.1.4.1.318.1.2.2.1.23 |
parVersCounterStartValHighWordThis variable indicates the High word of the
version counter that WINS should start withrw Counter .1.3.6.1.4.1.318.1.2.2.1.24 |
parRplOnlyWCnfPnrsThis variable indicates whether or not
replication should be done with non-configures pnrs.
If not set to zero, replication will be done only with
partners listed in the registry (except when an
update notification comes in)rw INTEGER .1.3.6.1.4.1.318.1.2.2.1.25 |
parStaticDataInitThis variable indicates whether Static data should
be read in at initialization and reconfiguration time.
Update of any mib variable in the parameters group
constitutes reconfigurationsrw INTEGER .1.3.6.1.4.1.318.1.2.2.1.26 |
parLogFlagThis variable indicates whether logging should be
done. Default behaviour is to do loggingrw INTEGER .1.3.6.1.4.1.318.1.2.2.1.27 |
parLogFileNameThis variable gives the path to the log filerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.318.1.2.2.1.28 |
parBackupDirPathThis variable gives the path to the backup dirrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.318.1.2.2.1.29 |
parDoBackupOnTermThis variable specifies whether WINS should do
backup on termination. Setting it 1 holds no
meaning unless parBackupDirPath is set alsorw Enumeration .1.3.6.1.4.1.318.1.2.2.1.30 |
parMigrateOnThis variable specifies whether static records
in the wins database should be treated as
dynamic records during conflicts with new
dynamic registrations.rw Enumeration .1.3.6.1.4.1.318.1.2.2.1.31 |
pull OBJECT IDENTIFIER .1.3.6.1.4.1.318.1.2.2.2 |
pullInitTimeThis variable indicates whether pull should be
done at WINS invocation and at reconfiguration.
If any pull group's mib variable is set, that
constitutes reconfigurationrw INTEGER .1.3.6.1.4.1.318.1.2.2.2.1 |
pullCommRetryCountThis variable gives the retry count in
case of comm failure when doing pull replication.
This is the max. number of retries that will be
done at the interval specified for the Partner
before WINS will stop for a certain number (canned) of
replication time intervals before starting again.rw INTEGER .1.3.6.1.4.1.318.1.2.2.2.2 |
pullPnrTableA list of Partners with which pull replication needs
to be donerw SEQUENCE OF PullPnrEntry .1.3.6.1.4.1.318.1.2.2.2.3 |
pPullPnrEntryThis is the row corresponding to a partnerrw PullPnrEntry .1.3.6.1.4.1.318.1.2.2.2.3.1 |
pullPnrAddThis is the address of the remote WINS partnerrw IpAddress .1.3.6.1.4.1.318.1.2.2.2.3.1.1 |
pullPnrSpTimeThis variable gives the specific time at which
pull replication should occurrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.318.1.2.2.2.3.1.2 |
pullPnrTimeIntervalThis variable gives the time interval for
pull replicationrw INTEGER .1.3.6.1.4.1.318.1.2.2.2.3.1.3 |
pullPnrMemberPrecThis is the precedence to be given to members of
the special group pulled from the WINS. Note:
the precedence of locally registered members of a
special group is more than any replicas pulled inrw Enumeration .1.3.6.1.4.1.318.1.2.2.2.3.1.4 |
pullPnrNoOfSuccRplsThe number of times replication was successful with
the WINS after invocation or reset of countersro Counter .1.3.6.1.4.1.318.1.2.2.2.3.1.5 |
pullPnrNoOfCommFailsThe number of times replication was unsuccessful with
the WINS due to comm. failure (after invocation or reset
of countersro Counter .1.3.6.1.4.1.318.1.2.2.2.3.1.6 |
pullPnrVersNoLowWordThe low word of the highest vers. no found in records
owned by this WINS.ro Counter .1.3.6.1.4.1.318.1.2.2.2.3.1.7 |
pullPnrVersNoHighWordThe high word of the highest vers. no found in records
owned by this WINS.ro Counter .1.3.6.1.4.1.318.1.2.2.2.3.1.8 |
push OBJECT IDENTIFIER .1.3.6.1.4.1.318.1.2.2.3 |
pushInitTimeThis variable indicates whether a push (i.e.
notification message) should be done at invocation.rw INTEGER .1.3.6.1.4.1.318.1.2.2.3.1 |
pushRplOnAddChgThis variable indicates whether a notification
message should be sent when address changesrw INTEGER .1.3.6.1.4.1.318.1.2.2.3.2 |
pushPnrTableA list of WINS Partners with which push
replication is to be initiatedrw SEQUENCE OF PushPnrEntry .1.3.6.1.4.1.318.1.2.2.3.3 |
pushPnrEntryThis is the row corresponding to the WINS pnrrw PushPnrEntry .1.3.6.1.4.1.318.1.2.2.3.3.1 |
pushPnrAddAddress of the WINS partnerrw IpAddress .1.3.6.1.4.1.318.1.2.2.3.3.1.1 |
pushPnrUpdateCountThis variable indicates the # of updates that
should result in a push messagerw INTEGER .1.3.6.1.4.1.318.1.2.2.3.3.1.2 |
datafiles OBJECT IDENTIFIER .1.3.6.1.4.1.318.1.2.2.4 |
dfDatafilesTableA list of datafiles specified under the Datafiles
key in the registry. These files are used for
statically initialization of the WINS databaserw SEQUENCE OF DFDatafileEntry .1.3.6.1.4.1.318.1.2.2.4.1 |
dfDatafileEntrydata file namerw DFDatafileEntry .1.3.6.1.4.1.318.1.2.2.4.1.1 |
dfDatafileIndexUsed for indexing entries in the datafiles table.
It has no other use INTEGER .1.3.6.1.4.1.318.1.2.2.4.1.1.1 |
dfDatafileNameName of the datafile to use for static initializationrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.318.1.2.2.4.1.1.2 |
cmd OBJECT IDENTIFIER .1.3.6.1.4.1.318.1.2.2.5 |
cmdPullTriggerThis variable when set will cause the WINS to
pull from the remote WINS identified by the IpAddressrw IpAddress .1.3.6.1.4.1.318.1.2.2.5.1 |
cmdPushTriggerThis variable when set will cause the WINS to
push a notification message to the remote WINS
identified by the IpAddressrw IpAddress .1.3.6.1.4.1.318.1.2.2.5.2 |
cmdDeleteWinsThis variable when set will cause all information
pertaining to a WINS (data records, context
information to be deleted from the local WINS.
Use this only when owner-address mapping table is
getting to near capacity. NOTE: deletion of all
information pertaining to the managed WINS is not
permittedrw IpAddress .1.3.6.1.4.1.318.1.2.2.5.3 |
cmdDoScavengingThis variable when set will cause WINS to do
scavenging.rw Enumeration .1.3.6.1.4.1.318.1.2.2.5.4 |
cmdDoStaticInitWhen set WINS will do static initialization
using the file specified as the value. If
0 is specified, WINS will do static
initialization using the files specified
in the registry (can be read-written using
Datafile tablerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.318.1.2.2.5.5 |
cmdNoOfWrkThdsSets the number of worker threads in WINSrw INTEGER .1.3.6.1.4.1.318.1.2.2.5.6 |
cmdPriorityClassSet the priority class of WINS to normal or highrw Enumeration .1.3.6.1.4.1.318.1.2.2.5.7 |
cmdResetCountersReset the counters. Value is ignoredrw INTEGER .1.3.6.1.4.1.318.1.2.2.5.8 |
cmdDeleteDbRecsThis variable when set will cause all date records
pertaining to a WINS to be deleted from the local WINS.
Note: Only data records are deleted.rw IpAddress .1.3.6.1.4.1.318.1.2.2.5.9 |
cmdDRPopulateTableThis variable can set to retrieve records of
a WINS whose Ip address is provided. When set
the table is populated right-awayrw IpAddress .1.3.6.1.4.1.318.1.2.2.5.10 |
cmdDRDataRecordsTableThis is the table that stores the data records
The records are sorted lexicographically by name
Note: the table is cached (to save on overhead on WINS)
To repopulate the table, set cmdDRDataRecordsTable
mib varro SEQUENCE OF CmdDRRecordEntry .1.3.6.1.4.1.318.1.2.2.5.11 |
cmdDRRecordEntrydata record owned by WINS whose address
was specified when CmdDRRecordsTable was
setrw CmdDRRecordEntry .1.3.6.1.4.1.318.1.2.2.5.11.1 |
cmdDRRecordNameName in the recordro OCTET STRING .1.3.6.1.4.1.318.1.2.2.5.11.1.1 |
cmdDRRecordAddressAddress(es) of the record. If the record is
a multihomed record or a special group, the
addresses are returned sequentially in pairs.
Each pair is comprised of the address of the
owner wins followed by the address of the
machine (multihomed)/member (special group).
Note: Following snmp's convention, the records
are always returned in network byte orderro OCTET STRING .1.3.6.1.4.1.318.1.2.2.5.11.1.2 |
cmdDRRecordTypeType of the recordro Enumeration .1.3.6.1.4.1.318.1.2.2.5.11.1.3 |
cmdDRRecordPersistenceTypePersistence type of the recordro Enumeration .1.3.6.1.4.1.318.1.2.2.5.11.1.4 |
cmdDRRecordStateState of the record.ro Enumeration .1.3.6.1.4.1.318.1.2.2.5.11.1.5 |
cmdWinsVersNoLowWordThe low word of the version number counter of the WINSro INTEGER .1.3.6.1.4.1.318.1.2.2.5.12 |
cmdWinsVersNoHighWordThe high word of the version number counter of the WINSro INTEGER .1.3.6.1.4.1.318.1.2.2.5.13 |