APCUPS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for APCUPS-MIB.
108
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
108 total| Object Name |
|---|
apc OBJECT IDENTIFIER .1.3.6.1.4.1.318 |
IMPORTS Unknown .1.3.6.1.4.1.318 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.318.1 |
software OBJECT IDENTIFIER .1.3.6.1.4.1.318.1.2 |
powerChuteDMIAgent OBJECT IDENTIFIER .1.3.6.1.4.1.318.1.2.2 |
dmtfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.318.1.2.2.1 |
tComponentidThis group defines the attributes common to all components.
This groupis required. SEQUENCE OF SComponentid .1.3.6.1.4.1.318.1.2.2.1.1 |
eComponentid SComponentid .1.3.6.1.4.1.318.1.2.2.1.1.1 |
a1ManufacturerManufacturer of this system.ro DmiDisplaystring .1.3.6.1.4.1.318.1.2.2.1.1.1.1 |
a1ProductProduct name for this system.ro DmiDisplaystring .1.3.6.1.4.1.318.1.2.2.1.1.1.2 |
a1VersionVersion number of this system.ro DmiDisplaystring .1.3.6.1.4.1.318.1.2.2.1.1.1.3 |
a1SerialNumberSerial number for this system.ro DmiDisplaystring .1.3.6.1.4.1.318.1.2.2.1.1.1.4 |
a1InstallationThe time and date when this component was installed.ro DmiDateX .1.3.6.1.4.1.318.1.2.2.1.1.1.5 |
a1VerifyA code that provides a level of verification that the component
is stillinstalled and working.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.1.1.6 |
tUpsBatteryThe UPS Battery group contains information regarding the
UPSsystem's battery status. SEQUENCE OF SUpsBattery .1.3.6.1.4.1.318.1.2.2.1.2 |
eUpsBattery SUpsBattery .1.3.6.1.4.1.318.1.2.2.1.2.1 |
a2BatteryStatusThe indication of the capacity remaining in the UPS system's
batteries. Avalue of 'battery normal' indicates that the remaining estimated
minutes of run-time isgreater than the UPS's configured 'low battery time'
(typically two minutes). A valueof 'battery low' indicates that the remaining
estimated minutes of battery run-time isless than or equal to the UPS's configur
d 'low battery time'. A value of 'batterydepleted' indicates that the UPS
will be unable to sustain the present load when and ifthe utiro Enumeration .1.3.6.1.4.1.318.1.2.2.1.2.1.1 |
a2SecondsOnBatteryIf the UPS is on battery power, the elapsed time in seconds
since theUPS last switched to battery power, or the time since the UPS component
software waslast restarted, whichever is less. Zero shall be returned if
the UPS is not on batterypower.ro DmiCounter .1.3.6.1.4.1.318.1.2.2.1.2.1.2 |
a2EstimatedMinutesRemainingAn estimate in minutes of the time to battery charge depletion
under thepresent load conditions if the utility power is off and remains
off, or if it were to be lostand remain off.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.2.1.3 |
a2EstimatedChargeRemainingAn estimate of the time to battery charge depletion under
the present load conditions if theutility power is off and remains off, or
if it were to be lost and remain off. The valuerepresents a percent of full
charge.ro DmiGauge .1.3.6.1.4.1.318.1.2.2.1.2.1.4 |
a2BatteryVoltageThe magnitude of the present battery voltage in 0.1 volts
DC.ro DmiGauge .1.3.6.1.4.1.318.1.2.2.1.2.1.5 |
a2BatteryCurrentThe present battery current in 0.1 Amps DC.ro DmiGauge .1.3.6.1.4.1.318.1.2.2.1.2.1.6 |
a2TemperatureProbeIndexIndex into the Temperature Probe table. This probe indicates
the ambienttemperature at or near the UPS battery casing.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.2.1.7 |
a2FruGroupIndexIf this is a Field Replaceable Unit or it is part of another
FRU, this providesan index into the FRU table; 'value = -1' indicates that
the group is not a FRU.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.2.1.8 |
a2OperationalGroupIndexThe index into the Operational State table for this device.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.2.1.9 |
tTemperatureProbeThis group defines the attributes for the temperature probes
in thissystem. SEQUENCE OF STemperatureProbe .1.3.6.1.4.1.318.1.2.2.1.3 |
eTemperatureProbe STemperatureProbe .1.3.6.1.4.1.318.1.2.2.1.3.1 |
a3TemperatureProbeTableIndexIndex into this temperature probe table.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.1 |
a3TemperatureProbeLocationIdentifies the physical location of the temperature probe.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.3.1.2 |
a3TemperatureProbeDescriptionAdditional descriptive information about the temperature
probe orprobe's location.ro DmiDisplaystring .1.3.6.1.4.1.318.1.2.2.1.3.1.3 |
a3TemperatureStatusDefines the status of the temperature monitored by this temperat
reprobe.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.3.1.4 |
a3TemperatureProbeTemperatureReadingThe present temperature reading of this temperature probe
in 1/10th degrees C. 0x8000000 denotes 'unknown' or 'unsupported'.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.5 |
a3MonitoredTemperatureNominalReadingThe nominal temperature reading of the temperature monitored
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.6 |
a3MonitoredTemperatureNormalMaximumThe normal maximum temperature reading of the temperature
monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'
or 'unsupported'.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.7 |
a3MonitoredTemperatureNormalMinimumThe normal minimum temperature reading of the temperature
monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'
or 'unsupported'.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.8 |
a3TemperatureProbeMaximumThe maximum temperature reading specified to be readable
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.9 |
a3TemperatureProbeMinimumThe minimum temperature reading specified to be readable
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.10 |
a3TemperatureReadingLowerThreshold-Non-cThe lower non-critical threshold for the temperature reading
set by the user, in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupport
d'.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.11 |
a3TemperatureReadingUpperThreshold-Non-cThe upper non-critical threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.12 |
a3TemperatureReadingLowerThreshold-CritiThe lower critical threshold for the temperature probe, in
1/10 degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.13 |
a3TemperatureReadingUpperThreshold-CritiThe upper critical threshold for the temperature probe, in
/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.14 |
a3TemperatureReadingLowerThreshold-Non-rThe lower non-recoverable threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.15 |
a3TemperatureReadingUpperThreshold-Non-rThe upper non-recoverable threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.16 |
a3TemperatureProbeResolutionThe resolution for the reading from this temperature probe,
in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown' or 'unsupported'.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.17 |
a3TemperatureProbeToleranceThe tolerance for the reading from this temperature probe,
in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.18 |
a3TemperatureProbeAccuracyThe accuracy for the reading from this temperature probe,
in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or 'unsuppor
ed'.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.19 |
a3FruGroupIndexIndex into the FRU table. A value of -1 indicates that this
device is not an FRU.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.20 |
a3OperationalGroupIndexIndex into the Operational State tablero DmiInteger .1.3.6.1.4.1.318.1.2.2.1.3.1.21 |
tOperationalStateTableThis group provides the operational state, usage, and availabili
y status,and administrative state indicators for specific Device Group instances SEQUENCE OF SOperationalStateTable .1.3.6.1.4.1.318.1.2.2.1.4 |
eOperationalStateTable SOperationalStateTable .1.3.6.1.4.1.318.1.2.2.1.4.1 |
a4OperationalStateInstanceIndexThe Index into the Operational State table.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.4.1.1 |
a4DeviceGroupIndexThe group ID of the group referencing this instance.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.4.1.2 |
a4OperationalStatusThe operational status of the Device Group instance.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.4.1.3 |
a4UsageStateThe usage state of the Device Group instance.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.4.1.4 |
a4AvailabilityStatusThe availability status of the Device Group instance.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.4.1.5 |
a4AdministrativeStateThe administrative state of the Device Group instance.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.4.1.6 |
a4FatalErrorCountThe accumulated Fatal or Non-recoverable error count for
this DeviceGroup instance.ro DmiCounter .1.3.6.1.4.1.318.1.2.2.1.4.1.7 |
a4MajorErrorCountThe accumulated Major or Critical error count for this Device
Groupinstance.ro DmiCounter .1.3.6.1.4.1.318.1.2.2.1.4.1.8 |
a4WarningErrorCountThe accumulated Warning or Non-Critical error count for this
DeviceGroup instance.ro DmiCounter .1.3.6.1.4.1.318.1.2.2.1.4.1.9 |
a4CurrentErrorStatusThis attribute presents the current error status for this
Device Groupinstance. The most critical error status in effect should be
presented. I.e. if a part of theDevice Group instance is 'Critical', while
other status is 'Non-critical' then the status'Critical' should be reported.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.4.1.10 |
tDiagnosticsThis group defines the diagnostic functions that are provided
by thiscomponent for analyzing potential failures within the component. A
diagnosticfunction could be an actual test run against the component, the
results of a self-test ofthe component, an analysis of failure information
captured during a failure of thecomponent, or an analysis of the current
state of the component. SEQUENCE OF SDiagnostics .1.3.6.1.4.1.318.1.2.2.1.5 |
eDiagnostics SDiagnostics .1.3.6.1.4.1.318.1.2.2.1.5.1 |
a5DiagnosticFunctionTableIndexA unique identifier for this specific diagnostic function.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.5.1.1 |
a5DiagnosticFunctionNameA specific descriptive name of the diagnostic function, includin
versioninformation, if relevant.ro DmiDisplaystring .1.3.6.1.4.1.318.1.2.2.1.5.1.2 |
a5DiagnosticFunctionDescriptionA description of what this diagnostic function does.ro DmiDisplaystring .1.3.6.1.4.1.318.1.2.2.1.5.1.3 |
a5ExclusiveAccessRequiredIndicates whether this diagnostic function requires exclusive
access tothe device or component, implying that the user or management applicati
n must takesome action within the operating system to ensure that the device
or component cannotbe used by any other function.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.5.1.4 |
a5PrerequisiteConditionsIndicates what conditions must be met before this diagnostic
functioncan be run.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.5.1.5 |
a5PrerequisiteDiagnosticFunctionIf non-0, this specifies the ID of another diagnostic function
that must berun immediately prior to this one.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.5.1.6 |
tDiagnosticRequestGroupThis group defines the attributes which a management application
usesto request an actual diagnostic analysis. SEQUENCE OF SDiagnosticRequestGroup .1.3.6.1.4.1.318.1.2.2.1.6 |
eDiagnosticRequestGroup SDiagnosticRequestGroup .1.3.6.1.4.1.318.1.2.2.1.6.1 |
a6DiagnosticFunctionReserveKeyIndicates whether the interface to this component's diagnostic
functionsis reserved. A zero value returned on a get indicates that a reserve
is already in effect. A non-zero value indicates that no reserve was in effect,
and the returned value may beused as a reserve key.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.6.1.1 |
a6DiagnosticFunctionRequestThe ID of the specific diagnostic function which is being
requested. Ifthe interface is reserved, a set request to this attribute should
also set the DiagnosticFunction Reserve Key with the reserve key value.rw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.6.1.2 |
a6DiagnosticFunctionResultThe integer-based result code of the last diagnostic function
run.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.6.1.3 |
tDiagnosticResultsThis group defines the attributes for interpreting diagnostic
functionresult codes. SEQUENCE OF SDiagnosticResults .1.3.6.1.4.1.318.1.2.2.1.7 |
eDiagnosticResults SDiagnosticResults .1.3.6.1.4.1.318.1.2.2.1.7.1 |
a7DiagnosticFunctionIdThe unique ID for a specific diagnostic function.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.7.1.1 |
a7DiagnosticFunctionResultAn integer-based result code of the diagnostic function.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.7.1.2 |
a7DiagnosticFunctionResultDescriptionA description of what this result code for this diagnostic
functionmeans, including suggested corrective actions, where possible.ro DmiDisplaystring .1.3.6.1.4.1.318.1.2.2.1.7.1.3 |
a7FaultIsolatedToThisComponentAn indicator of whether the fault is strictly isolated within
the bounds ofthis component. A False value indicates that the fault might
be caused by a failingparent component; for example, a disk test may fail
because of a faulty disk controller.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.7.1.4 |
tErrorControlGroupIndication control and status for the parent group. SEQUENCE OF SErrorControlGroup .1.3.6.1.4.1.318.1.2.2.1.8 |
eErrorControlGroup SErrorControlGroup .1.3.6.1.4.1.318.1.2.2.1.8.1 |
a8SelfidInstance id. A unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.8.1.1 |
a8NumberOfFatalErrorsCount of all fatal errors since system startup.ro DmiCounter .1.3.6.1.4.1.318.1.2.2.1.8.1.2 |
a8NumberOfMajorErrorsCount of all major errors since system startup.ro DmiCounter .1.3.6.1.4.1.318.1.2.2.1.8.1.3 |
a8NumberOfWarningsCount of all warning errors since system startup.ro DmiCounter .1.3.6.1.4.1.318.1.2.2.1.8.1.4 |
a8ErrorStatuscurrent error statusro Enumeration .1.3.6.1.4.1.318.1.2.2.1.8.1.5 |
a8ErrorStatusTypeIndicates the type of detection that set the current error
status.ro Enumeration .1.3.6.1.4.1.318.1.2.2.1.8.1.6 |
a8AlarmGenerationControls indication generation for errors.rw Enumeration .1.3.6.1.4.1.318.1.2.2.1.8.1.7 |
tMiftomibThis group defines attributes required for DMI to
SNMP translati
n. SEQUENCE OF SMiftomib .1.3.6.1.4.1.318.1.2.2.1.99 |
eMiftomib SMiftomib .1.3.6.1.4.1.318.1.2.2.1.99.1 |
a99MibNameThe MIB name that defines this MIFro DmiDisplaystring .1.3.6.1.4.1.318.1.2.2.1.99.1.1 |
a99MibOidThe MIB Object Identifier that corresponds to this MIFro DmiDisplaystring .1.3.6.1.4.1.318.1.2.2.1.99.1.2 |
a99DisableTrapThis attribute can be changed to disable sending oftraps
from this componentrw DmiInteger .1.3.6.1.4.1.318.1.2.2.1.99.1.3 |
tTrapGroupThis group defines attributes needed for Trap
definition. This group does not exist in MIF file SEQUENCE OF STrapGroup .1.3.6.1.4.1.318.1.2.2.1.9999 |
eTrapGroup STrapGroup .1.3.6.1.4.1.318.1.2.2.1.9999.1 |
pwrchuteEventErrorDMI Service Layer generated event for APC UPS TRAP-TYPE .1.3.6.1.4.1.318.1.2.2.1.9999.1.0.1 |
a9999ErrorTimeThe Date & Time when the error occuredro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.318.1.2.2.1.9999.1.1 |
a9999ErrorStatusError Status Codero DmiInteger .1.3.6.1.4.1.318.1.2.2.1.9999.1.2 |
a9999ErrorGroupIdGroup ID of the errorControl Groupro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.9999.1.3 |
a9999ErrorInstanceIdInstance ID of the errorControl Groupro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.9999.1.4 |
a9999ComponentIdComponent ID of the component that caused this errorro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.9999.1.5 |
a9999GroupIdGroup ID of the Group that caused this errorro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.9999.1.6 |
a9999InstanceIdInstance ID of the Group that caused this errorro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.9999.1.7 |
a9999VendorCode1Vendor specific code 1ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.9999.1.8 |
a9999VendorCode2Vendor specific code 2ro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.9999.1.9 |
a9999VendorTextVendor specific octet string inforo OCTET STRING .1.3.6.1.4.1.318.1.2.2.1.9999.1.10 |
a9999ParentGroupIdGroup ID of parent of Group that caused this errorro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.9999.1.11 |
a9999ParentInstanceIdInstance ID of parent of Group that caused this errorro DmiInteger .1.3.6.1.4.1.318.1.2.2.1.9999.1.12 |