WC7520-MIB
The MIB module for 802.11a/b/g/n Prosafe 50AP Wireless Management System iso(1). org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).productID(100). wlancontroller(14).wc7520(2)
Main OID:
wc7520.1.3.6.1.4.1.4526.100.8.2
117
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
117 total| Object Name |
|---|
netgear OBJECT IDENTIFIER .1.3.6.1.4.1.4526 |
productID OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100 |
wlancontroller OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100.8 |
wc7520The MIB module for 802.11a/b/g/n Prosafe
50AP Wireless Management System iso(1).
org(3).dod(6).internet(1).private(4).
enterprises(1).netgear(4526).productID(100).
wlancontroller(14).wc7520(2) MODULE-IDENTITY .1.3.6.1.4.1.4526.100.8.2 |
wcSystemGeneralSettings OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100.8.2.1 |
wcNameWC7520 controller name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.1.1 |
wcCountryWC7520 controllers country.rw Enumeration .1.3.6.1.4.1.4526.100.8.2.1.2 |
wcLocationWC7520 controllers location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.1.3 |
wcStateState flag is used to apply the configuration.
Applied(1) : configuration is fresh or applied already.
Modified(2) : some of the configuration field is modified but not yet applied.
Apply(3) : Use this value to apply modified configurationrw Enumeration .1.3.6.1.4.1.4526.100.8.2.1.4 |
wcIpVlan OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100.8.2.2 |
wcIpVlanIpIP address of controllerrw IpAddress .1.3.6.1.4.1.4526.100.8.2.2.1 |
wcIpVlanSubnetMaskSubnet mask for controller IPrw IpAddress .1.3.6.1.4.1.4526.100.8.2.2.2 |
wcIpVlanDefaultGatewayDefault Gateway servers IP address.rw IpAddress .1.3.6.1.4.1.4526.100.8.2.2.3 |
wcIpVlanPrimaryDnsServerPrimary DNS Server IP addressrw IpAddress .1.3.6.1.4.1.4526.100.8.2.2.4 |
wcIpVlanSecondaryDnsServerSecondary DNS Server IP addressrw IpAddress .1.3.6.1.4.1.4526.100.8.2.2.5 |
wcIpVlanWinsServerWins Server IP address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.2.6 |
wcIpVlanVlanEnableEnable-Disable Vlan.
disable(0) : To disable Vlan
enable(1) : To enable Vlanrw Enumeration .1.3.6.1.4.1.4526.100.8.2.2.7 |
wcIpVlanUntaggedVlanWC7520 controller untagged vlanrw Integer32 .1.3.6.1.4.1.4526.100.8.2.2.8 |
wcIpVlanManagementVlanWC7520 controller management vlanrw Integer32 .1.3.6.1.4.1.4526.100.8.2.2.9 |
wcIpVlanStateState flag is used to apply the configuration.
Applied(1) : configuration is fresh or applied already.
Modified(2) : some of the configurations field are modified
but not yet applied.
Apply(3) : Use this value to apply modified configurationrw Enumeration .1.3.6.1.4.1.4526.100.8.2.2.10 |
wcAccessPoint OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100.8.2.3 |
wcAccessPointTableList of access points managed by WC7520.
MAC address is the key index for this table SEQUENCE OF WcAccessPointEntry .1.3.6.1.4.1.4526.100.8.2.3.1 |
wcAccessPointEntryA row describing configuration of one managed access point. WcAccessPointEntry .1.3.6.1.4.1.4526.100.8.2.3.1.1 |
wcAccessPointMacMAC address of Access Pointro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.1.1.1 |
wcAccessPointIpIP address of Access Pointro IpAddress .1.3.6.1.4.1.4526.100.8.2.3.1.1.2 |
wcAccessPointSubnetMaskIP subnet mask of Access Pointro IpAddress .1.3.6.1.4.1.4526.100.8.2.3.1.1.3 |
wcAccessPointDefaultGatewayDefault gateway for Access Point.ro IpAddress .1.3.6.1.4.1.4526.100.8.2.3.1.1.4 |
wcAccessPointVlanEnableEnable-Disable Vlan.
disable(0) : To disable Vlan
enable(1) : To enable Vlanrw Enumeration .1.3.6.1.4.1.4526.100.8.2.3.1.1.5 |
wcAccessPointUntaggedVlanAccess Point Untagged Vlan.rw Integer32 .1.3.6.1.4.1.4526.100.8.2.3.1.1.6 |
wcAccessPointManagementVlanAccess Point Management Vlanrw Integer32 .1.3.6.1.4.1.4526.100.8.2.3.1.1.7 |
wcAccessPointNameAccess Point Namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.1.1.8 |
wcAccessPointModelAccess Point Modelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.1.1.9 |
wcAccessPointGroupAccess Point Group idro Integer32 .1.3.6.1.4.1.4526.100.8.2.3.1.1.10 |
wcAccessPointAntennaAccess Point Antennaro Integer32 .1.3.6.1.4.1.4526.100.8.2.3.1.1.11 |
wcAccessPointBuildingAccess Point building index.rw Integer32 .1.3.6.1.4.1.4526.100.8.2.3.1.1.12 |
wcAccessPointFloorAccess Point floor indexrw Integer32 .1.3.6.1.4.1.4526.100.8.2.3.1.1.13 |
wcAccessPointLocationAccess Point location stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.1.1.14 |
wcAccessPointLocXAccess Point location x-axis (in meters)ro Integer32 .1.3.6.1.4.1.4526.100.8.2.3.1.1.15 |
wcAccessPointLocYAccess Point location y-axis (in meters)ro Integer32 .1.3.6.1.4.1.4526.100.8.2.3.1.1.16 |
wcAccessPointStateAccess Point Statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.1.1.17 |
wcAccessPointRowStatusRow Status is used to apply the access point configuration.
active(1) - send rowstatus as active(1) to apply the configuration.
notReady(3) - Indicates that some columns in the row are modified and not yet applied.
notInService(2), createAndWait(5), createAndGo(4), destroy(6) - not valid for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.1.1.18 |
wcAccessPointDetailsTableThis table provides detailed configuration of access point. SEQUENCE OF WcAccessPointDetailsEntry .1.3.6.1.4.1.4526.100.8.2.3.2 |
wcAccessPointDetailsEntryA row describing detailed configuration of one managed access point. WcAccessPointDetailsEntry .1.3.6.1.4.1.4526.100.8.2.3.2.1 |
wcAccessPointDetailsMacAccess Point MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.2.1.1 |
wcAccessPointDetailsIpAccess Point IP address.ro IpAddress .1.3.6.1.4.1.4526.100.8.2.3.2.1.2 |
wcAccessPointDetailsNameAccess Point Name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.2.1.3 |
wcAccessPointDetailsModelAccess Point model.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.2.1.4 |
wcAccessPointDetailsGroupAccess Point group index.ro Integer32 .1.3.6.1.4.1.4526.100.8.2.3.2.1.5 |
wcAccessPointDetails24GHzChannelAccess Point 2.4 GHz channel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.2.1.6 |
wcAccessPointDetails5GHzChannelAccess Point 5 GHz channel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.2.1.7 |
wcAccessPointDetails24GHzOperatingChannelAccess Point 2.4 GHz operating channel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.2.1.8 |
wcAccessPointDetails5GHzOperatingChannelAccess Point 5 GHz channel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.2.1.9 |
wcAccessPointDetailsChannelMgmtThis field tells if auto channel allocation is on or not.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.3.2.1.10 |
wcAccessPointDetailsLoadBalanceMaxClientsMax number of clients for load balancing.ro Integer32 .1.3.6.1.4.1.4526.100.8.2.3.2.1.11 |
wcAccessPointDetailsLoadBalanceSignalQualitySignal quality for load balancing.ro Integer32 .1.3.6.1.4.1.4526.100.8.2.3.2.1.12 |
wcClients OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100.8.2.4 |
wcClientListTableList of all the clients connected to Access points managed by WC7520 SEQUENCE OF WcClientListEntry .1.3.6.1.4.1.4526.100.8.2.4.1 |
wcClientListEntryEach row give info about a client and access point to which it is connected. WcClientListEntry .1.3.6.1.4.1.4526.100.8.2.4.1.1 |
wcClientMacMac address of the client.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.1.1.1 |
wcClientIpIP address of the client.ro IpAddress .1.3.6.1.4.1.4526.100.8.2.4.1.1.2 |
wcClientLocationclient location.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.1.1.3 |
wcClientApNameName of Access Point to which cleint is connected.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.1.1.4 |
wcClientApIpIP Address of Access Point to which cleint is connected.ro IpAddress .1.3.6.1.4.1.4526.100.8.2.4.1.1.5 |
wcClientApMacMAC address of Access Point to which cleint is connected.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.1.1.6 |
wcClientBssidBrodcast SSID of Access Point.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.1.1.7 |
wcClientSsidSSID of Access Point.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.1.1.8 |
wcClientDetailsTableDetailed information about the clients connected to Access Points managed by WC7520. SEQUENCE OF WcClientDetailsEntry .1.3.6.1.4.1.4526.100.8.2.4.2 |
wcClientDetailsEntryA row describing detailed information about each client. WcClientDetailsEntry .1.3.6.1.4.1.4526.100.8.2.4.2.1 |
wcClientDetailsMacMAC address of the client.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.2.1.1 |
wcClientDetailsApName of Access Point to which client is connected.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.2.1.2 |
wcClientDetailsBssidBssid of the client.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.2.1.3 |
wcClientDetailsFrequencyFrequent band of client.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.2.1.4 |
wcClientDetailsAuthAuthentication method.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.2.1.5 |
wcClientDetailsCipherCleint cipherro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.2.1.6 |
wcClientDetailsAidClient Aidro Integer32 .1.3.6.1.4.1.4526.100.8.2.4.2.1.7 |
wcClientDetailsRssiClients RSSIro Integer32 .1.3.6.1.4.1.4526.100.8.2.4.2.1.8 |
wcClientDetailsTxPowerClient transmit powerro Integer32 .1.3.6.1.4.1.4526.100.8.2.4.2.1.9 |
wcClientDetailsTxRateClient transmited data rate.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.2.1.10 |
wcClientDetailsTxBytesClient transmited number of bytes.ro Integer32 .1.3.6.1.4.1.4526.100.8.2.4.2.1.11 |
wcClientDetailsRxRateClient received data rate.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.4.2.1.12 |
wcClientDetailsRxBytesClient received number of bytes.ro Integer32 .1.3.6.1.4.1.4526.100.8.2.4.2.1.13 |
wcClientDetailsTxPacketsClient transmitted number of bytesro Integer32 .1.3.6.1.4.1.4526.100.8.2.4.2.1.14 |
wcClientDetailsRxPacketsClient received number of packetsro Integer32 .1.3.6.1.4.1.4526.100.8.2.4.2.1.15 |
wcProfiles OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100.8.2.5 |
wcProfileGroupsTableList of profile groups. SEQUENCE OF WcProfileGroupsEntry .1.3.6.1.4.1.4526.100.8.2.5.1 |
wcProfileGroupsEntryA row describing a profile-group.rw WcProfileGroupsEntry .1.3.6.1.4.1.4526.100.8.2.5.1.1 |
wcProfileGroupGroupIdxProfile group index. Integer32 .1.3.6.1.4.1.4526.100.8.2.5.1.1.1 |
wcProfileGroupNameName of profile-groupro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.5.1.1.2 |
wcProfileGroupBgProfilesNumber of 802.11b/bg/ng profiles.ro Integer32 .1.3.6.1.4.1.4526.100.8.2.5.1.1.3 |
wcProfileGroupAProfilesNumber of 802.11a/na profiles.ro Integer32 .1.3.6.1.4.1.4526.100.8.2.5.1.1.4 |
wcProfileGroupsRowStatusactive(1) - Default value of row status.
createAndGo(4) - To create a new profile group.
group-index must be provided to add a new profile group.
Note: After creation of profile-group, group-index can be different from
what is provided.
destroy(6) - To delete a profile group.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.5.1.1.5 |
wcProfilesTableList of all the profiles. SEQUENCE OF WcProfilesEntry .1.3.6.1.4.1.4526.100.8.2.5.2 |
wcProfilesEntryA row describing a profile. A profile is identified by
its group-index, radio-mode, and profile-index.rw WcProfilesEntry .1.3.6.1.4.1.4526.100.8.2.5.2.1 |
wcProfilesGroupIdxProfile group index to which this profile belongs. for basic group index=0. Integer32 .1.3.6.1.4.1.4526.100.8.2.5.2.1.1 |
wcProfilesRadioModeProfile radio mode, one of 802.11b/bg/ng or 802.11a/na. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.5.2.1.2 |
wcProfilesIdxProfile index which identifies a profile in a group. Integer32 .1.3.6.1.4.1.4526.100.8.2.5.2.1.3 |
wcProfilesNameProfile name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.5.2.1.4 |
wcProfilesSsidSSID of profile.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.5.2.1.5 |
wcProfilesBssidEnable/Disable broadcast of SSID.rw Enumeration .1.3.6.1.4.1.4526.100.8.2.5.2.1.6 |
wcProfilesAuthenticationAuthentication type.rw Enumeration .1.3.6.1.4.1.4526.100.8.2.5.2.1.7 |
wcProfilesEncryptionEncryption type.rw Enumeration .1.3.6.1.4.1.4526.100.8.2.5.2.1.8 |
wcProfilesKeyIndexIndex of key used out of following four keys.rw Integer32 .1.3.6.1.4.1.4526.100.8.2.5.2.1.9 |
wcProfilesKey1key 1rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.5.2.1.10 |
wcProfilesKey2key 2rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.5.2.1.11 |
wcProfilesKey3key 3rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.5.2.1.12 |
wcProfilesKey4key 4rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.5.2.1.13 |
wcProfilesClientSeprationEnable/Disable client seperation.rw Enumeration .1.3.6.1.4.1.4526.100.8.2.5.2.1.14 |
wcProfilesVlanVlanrw Integer32 .1.3.6.1.4.1.4526.100.8.2.5.2.1.15 |
wcProfilesAuthServerGroupIndex of Authetication server group used for this profile.rw Integer32 .1.3.6.1.4.1.4526.100.8.2.5.2.1.16 |
wcProfilesAclGroupIndex of ACL group used for this profile.rw Integer32 .1.3.6.1.4.1.4526.100.8.2.5.2.1.17 |
wcProfilesCaptivePortalEnable/Disable captive portal.rw Enumeration .1.3.6.1.4.1.4526.100.8.2.5.2.1.18 |
wcProfilesWiFiMultimediaEnable/Disable WiFi Multimedia.rw Enumeration .1.3.6.1.4.1.4526.100.8.2.5.2.1.19 |
wcProfilesWiFiMultimediaPowerSaveEnable/Disable WiFi Multimedia Powersave.rw Enumeration .1.3.6.1.4.1.4526.100.8.2.5.2.1.20 |
wcProfilesRowStatusRow Status is used to apply modified profile configuration, create and destroy a new profile.
active(1) - Indicates there is no modifications pending for commit for this profile.
notReady(3) - Indicates that some columns in the row are modified and not yet applied.
send active(1) to apply modified configurations.
createAndGo(4) - To create a new profile. group-index, radio-mode and profile-index must be
provided to add a new profile.
Note: After creation of a profile, profile-index can be different from
what is provided.
destroy(6) - To delete a profile.
notInService(2), createAndWait(5) - not valid for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.100.8.2.5.2.1.21 |
wcNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100.8.2.20 |
wcNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100.8.2.20.0 |
wcNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4526.100.8.2.20.3 |
More MIBs from Netgear
Browse all NetgearMIBs →WING-MIB
Standard SNMP MIB module defining data structures for WING-MIB.
3564 objects→
FASTPATH-SWITCHING-MIB
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
731 objects→
NETGEAR-SMART-SWITCHING-MIB
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
476 objects→
NETGEAR-SWITCHING-MIB
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
476 objects→
GSM7324-SWITCHING-MIB
SNMP MIB module
327 objects→
GSM7312-SWITCHING-MIB
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.
327 objects→