WATCHGUARD-SYSTEM-STATISTICS-MIB
The WATCHGUARD-SYSTEM-STATISTICS-MIB enables SNMP-based monitoring of core performance metrics and operational health indicators for WatchGuard firewalls, specifically tracking CPU utilization, memory consumption, interface traffic counters, and system uptime. This module provides the necessary data points for capacity planning, anomaly detection, and automated alerting within network management systems.
Imported Objects
Objects
13 total| Object Name |
|---|
wgInfoModuleThe MIB module describes various system statistics information of WatchGuard system. MODULE-IDENTITY .1.3.6.1.4.1.3097.6 |
wgSystemStatisticsMIBThis is the base system information for all system related statistical counters. OBJECT IDENTIFIER .1.3.6.1.4.1.3097.6.3 |
wgSystemCpuUtilCPU utilization of the system in last 5 seconds. The value is measured in 0.01%. For example, if the value is 234, then CPU utilization is 2.34%.ro Counter64 .1.3.6.1.4.1.3097.6.3.4 |
wgSystemTotalSendBytesThe total number of bytes sent since system is up. This number includes both cut through traffic and host traffic.ro Counter64 .1.3.6.1.4.1.3097.6.3.8 |
wgSystemTotalRecvBytesThe total number of bytes received since system is up. This number includes both cut through traffic and host traffic.ro Counter64 .1.3.6.1.4.1.3097.6.3.9 |
wgSystemTotalSendPacketsThe total number of the packets sent since system is up. This number includes both cut through traffic and host traffic.ro Counter64 .1.3.6.1.4.1.3097.6.3.10 |
wgSystemTotalRecvPacketsThe total number of the packets received since system is up. The number includes both cut through traffic and host traffic.ro Counter64 .1.3.6.1.4.1.3097.6.3.11 |
wgSystemStreamReqTotalThe total number of the connection requests since system is up.ro Counter64 .1.3.6.1.4.1.3097.6.3.30 |
wgSystemStreamReqDropThe total number of the connection requests being dropped since system is up.ro Counter64 .1.3.6.1.4.1.3097.6.3.34 |
wgSystemCpuUtil1CPU utilization of the system in last 1 minute. The value is measured in 0.01%. For example, if the value is 234, then CPU utilization is 2.34%.ro Counter64 .1.3.6.1.4.1.3097.6.3.77 |
wgSystemCpuUtil5CPU utilization of the system in last 5 minutes. The value is measured in 0.01%. For example, if the value is 234, then CPU utilization is 2.34%.ro Counter64 .1.3.6.1.4.1.3097.6.3.78 |
wgSystemCpuUtil15CPU utilization of the system in last 15 minutes. The value is measured in 0.01%. For example, if the value is 234, then CPU utilization is 2.34%.ro Counter64 .1.3.6.1.4.1.3097.6.3.79 |
wgSystemCurrActiveConnsTotal number of currently active connections of the system.ro Counter64 .1.3.6.1.4.1.3097.6.3.80 |
More MIBs from Watchguard
Browse all WatchguardMIBs →The WATCHGUARD-IPSEC-SA-MON-MIB-EXT module enables monitoring of IPSec Security Association states and statistics on WatchGuard firewalls, extending the IETF IPsec Monitor MIB to track SA establishment, termination, and traffic volume counters.
The WATCHGUARD-IPSEC-TUNNEL-MIB enables monitoring and management of IPsec tunnel interface states, traffic counters, and security association parameters on WatchGuard firewalls. It provides granular visibility into tunnel establishment status, packet throughput, and error statistics for troubleshooting encrypted site-to-site or remote access connections.
The WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB monitors WatchGuard security gateways to aggregate and report the status of IPSec Security Associations (SAs) between specific pairs of gateway IP addresses. It provides the data required to construct a topological view of IPSec tunnels by tracking the count and state of tunnel-mode SAs established between any two external IP endpoints.
The WATCHGUARD-PRODUCTS-MIB provides object identifiers for monitoring and managing WatchGuard firewall hardware, enabling the collection of critical performance metrics such as interface traffic counters, session states, CPU utilization, memory usage, and system health status via SNMP.
The WATCHGUARD-CLIENT-MIB facilitates the monitoring and management of endpoint client status, connection states, and security posture data within WatchGuard Firebox and XTM appliance environments via SNMP. This module enables administrators to track active client sessions, authentication states, and client-specific policy enforcement metrics for centralized network visibility.
The WATCHGUARD-HA-MIB module facilitates the monitoring of high availability cluster states and failover events on WatchGuard firewalls, specifically tracking HA synchronization status, node roles, and link health to ensure continuous service availability.