WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB
The WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB monitors WatchGuard security gateways to aggregate and report the status of IPSec Security Associations (SAs) between specific pairs of gateway IP addresses. It provides the data required to construct a topological view of IPSec tunnels by tracking the count and state of tunnel-mode SAs established between any two external IP endpoints.
Imported Objects
Objects
42 total| Object Name |
|---|
wgIpsecEndpointPairModuleThe MIB module describes generic Ipsec Endpoint Pair information of WatchGuard system. Mainly, the information obtained from this MIB is used to constructed topological view of IPSec security gateways that are connected by IPSec tunnels. An IPSec Endpoint Pair is a pair of security gateways that are connected with 0 or more IPSec SA's in tunnel mode. It contains information of aggregated information of tunnel mode SA's between two security gateways. An IPSec Endpoint Pair is identified by a pair of IP addresses. Therefore, if an IPSec security gateway X has 2 external IP addresses while IPsec secruity gateway Y has 3 external IP addresses, there are potentially 6 IPsec Endpoint Pairs between X and Y. MODULE-IDENTITY .1.3.6.1.4.1.3097.5 |
wgIpsecEndpointPairMIBThis is the base object identifier for all IPSec tunnel branches. OBJECT IDENTIFIER .1.3.6.1.4.1.3097.5.1 |
wgIpsecEndpointPairThis is the base object identifier for all IPSec tunnel information. OBJECT IDENTIFIER .1.3.6.1.4.1.3097.5.1.1 |
wgIpsecEndpointPairNumThe total number of entries in the wgIpsecEndpointPairTable.ro Unsigned32 .1.3.6.1.4.1.3097.5.1.1.1 |
wgIpsecEndpointPairTableThis is the connection table describing all current IPSec tunnels exist on this entity. SEQUENCE OF WGIpsecEndpointPairEntry .1.3.6.1.4.1.3097.5.1.1.2 |
wgIpsecEndpointPairEntryAn entry (conceptual row) containing the information on a IPSec tunnel between two IPSec security gateways. WGIpsecEndpointPairEntry .1.3.6.1.4.1.3097.5.1.1.2.1 |
wgIpsecEndpointPairIndexThe running index of this IPSec endpoint pair.ro Integer32 .1.3.6.1.4.1.3097.5.1.1.2.1.1 |
wgIpsecEndpointPairLocalAddrThe local IP address of the current IPSec ednpoint pair.ro IpAddress .1.3.6.1.4.1.3097.5.1.1.2.1.2 |
wgIpsecEndpointPairPeerAddrThe remote IP address of the current IPSec endpoint pair.ro IpAddress .1.3.6.1.4.1.3097.5.1.1.2.1.3 |
wgIpsecEndpointPairInSAsThe number of inbound IPSEC SA's within this IPSec endpoint pair.ro Unsigned32 .1.3.6.1.4.1.3097.5.1.1.2.1.4 |
wgIpsecEndpointPairOutSAsThe number of outbound IPSEC SA's within this IPSec endpoint pair.ro Unsigned32 .1.3.6.1.4.1.3097.5.1.1.2.1.5 |
wgIpsecEndpointPairInAccKbytesTotal inbound traffic in Kbytes since the establish of this connection.ro Counter32 UNITS "Kbytes" .1.3.6.1.4.1.3097.5.1.1.2.1.6 |
wgIpsecEndpointPairOutAccKbytesTotal outound traffic in Kbytes since the establish of this connection.ro Counter32 UNITS "Kbytes" .1.3.6.1.4.1.3097.5.1.1.2.1.7 |
wgIpsecEndpointPairInPacketsTotal number of inbound packets since the establish of this connection.ro Counter32 .1.3.6.1.4.1.3097.5.1.1.2.1.8 |
wgIpsecEndpointPairOutPacketsTotal number of outound packets since the establish of this connection.ro Counter32 .1.3.6.1.4.1.3097.5.1.1.2.1.9 |
wgIpsecEndpointPairDecryptErrorsTotal number of packets discarded due to decryption error since the establish of this connection.ro Counter32 .1.3.6.1.4.1.3097.5.1.1.2.1.10 |
wgIpsecEndpointPairAuthErrorsTotal number of packets discarded due to authentication error since the establish of this connection.ro Counter32 .1.3.6.1.4.1.3097.5.1.1.2.1.11 |
wgIpsecEndpointPairReplayErrorsTotal number of packets discarded due to replay error since the establish of this connection.ro Counter32 .1.3.6.1.4.1.3097.5.1.1.2.1.12 |
wgIpsecEndpointPairPolicyErrorsTotal number of packets discarded due to policy error since the establish of this connection.ro Counter32 .1.3.6.1.4.1.3097.5.1.1.2.1.13 |
wgIpsecEndpointPairPadErrorsTotal number of packets discarded due to pad value error since the establish of this connection.ro Counter32 .1.3.6.1.4.1.3097.5.1.1.2.1.14 |
wgIpsecEndpointPairOtherReceiveErrorsThe number of packets discarded due to errors other than decryption, authentication or replay errors. This may include packets dropped due to a lack of receive buffers, and may include packets dropped due to congestion at the decryption element.ro Counter32 .1.3.6.1.4.1.3097.5.1.1.2.1.15 |
wgIpsecEndpointPairSendErrorsThe number of packets discarded due to any error. This may include errors due to a lack of transmit buffers.ro Counter32 .1.3.6.1.4.1.3097.5.1.1.2.1.16 |
wgIpsecEndpointPairStatisticsThis is the base object identifier for all objects which are global counters for IPSec tunnels. OBJECT IDENTIFIER .1.3.6.1.4.1.3097.5.1.2 |
wgIpsecEndpointPairTotalInSAsThe total number of active inbound SA's in the entity.ro Gauge32 .1.3.6.1.4.1.3097.5.1.2.1 |
wgIpsecEndpointPairTotalOutSAsThe total number of active outbound SA's in the entity.ro Gauge32 .1.3.6.1.4.1.3097.5.1.2.2 |
wgIpsecEndpointPairTotalInAccKbytesThe total inbound IPsec traffic of this entity.ro Counter32 UNITS "Kbytes" .1.3.6.1.4.1.3097.5.1.2.3 |
wgIpsecEndpointPairTotalOutAccKbytesThe total outbound IPsec traffic of this entity.ro Counter32 .1.3.6.1.4.1.3097.5.1.2.4 |
wgIpsecEndpointPairTotalInPacketsThe total inbound IPsec packets of this entity.ro Counter32 UNITS "Kbytes" .1.3.6.1.4.1.3097.5.1.2.5 |
wgIpsecEndpointPairTotalOutPacketsThe total outbound IPsec packets of this entity.ro Counter32 .1.3.6.1.4.1.3097.5.1.2.6 |
wgIpsecEndpointPairTotalDecryptErrorsTotal number of packets on this entity discarded due to encryption error.ro Counter32 .1.3.6.1.4.1.3097.5.1.2.7 |
wgIpsecEndpointPairTotalAuthErrorsTotal number of packets on this entity discarded due to authentication errors.ro Counter32 .1.3.6.1.4.1.3097.5.1.2.8 |
wgIpsecEndpointPairTotalReplayErrorsTotal number of packets discarded due to replay errors on this entity.ro Counter32 .1.3.6.1.4.1.3097.5.1.2.9 |
wgIpsecEndpointPairTotalPolicyErrorsTotal number of packets discarded due to policy errors on this entity.ro Counter32 .1.3.6.1.4.1.3097.5.1.2.10 |
wgIpsecEndpointPairTotalPadErrorsTotal number of packets on this entity discarded due to pad value error.ro Counter32 .1.3.6.1.4.1.3097.5.1.2.11 |
wgIpsecEndpointPairTotalOtherReceiveErrorsThe total number of packets on this entity discarded due to errors other than decryption, authentication or replay errors. This may include packets dropped due to a lack of receive buffers, and may include packets dropped due to congestion at the decryption element.ro Counter32 .1.3.6.1.4.1.3097.5.1.2.12 |
wgIpsecEndpointPairTotalSendErrorsThe total number of packets discarded due to any error on this entity.ro Counter32 .1.3.6.1.4.1.3097.5.1.2.13 |
wgIpsecEndpointPairPeerIPToTunnelThis is the base object identifier for all tunnels information of the policies. OBJECT IDENTIFIER .1.3.6.1.4.1.3097.5.1.3 |
wgIpsecEndpointPairPeerIPToTunnelNumThe total number of tunnels in the peeriptotunnel table.ro Unsigned32 .1.3.6.1.4.1.3097.5.1.3.1 |
wgIpsecEndpointPairPeerIPToTunnelTableThe peeriptotunnel table in the endpointpair mib. SEQUENCE OF WGIpsecEndpointPairPeerIPToTunnelEntry .1.3.6.1.4.1.3097.5.1.3.2 |
wgIpsecEndpointPairPeerIPToTunnelEntryAn entry (conceptual row) containing the peer ip and tunnel information. WGIpsecEndpointPairPeerIPToTunnelEntry .1.3.6.1.4.1.3097.5.1.3.2.1 |
wgIpsecEndpointPairPeerIPToTunnelPeerIPThe peer ip of the peeriptotunnel table.ro IpAddress .1.3.6.1.4.1.3097.5.1.3.2.1.1 |
wgIpsecEndpointPairPeerIPToTunnelTunnelIDThe tunnel id of the peeriptotunnel table.ro Integer32 .1.3.6.1.4.1.3097.5.1.3.2.1.2 |
More MIBs from Watchguard
Browse all WatchguardMIBs →The WATCHGUARD-IPSEC-SA-MON-MIB-EXT module enables monitoring of IPSec Security Association states and statistics on WatchGuard firewalls, extending the IETF IPsec Monitor MIB to track SA establishment, termination, and traffic volume counters.
The WATCHGUARD-IPSEC-TUNNEL-MIB enables monitoring and management of IPsec tunnel interface states, traffic counters, and security association parameters on WatchGuard firewalls. It provides granular visibility into tunnel establishment status, packet throughput, and error statistics for troubleshooting encrypted site-to-site or remote access connections.
The WATCHGUARD-PRODUCTS-MIB provides object identifiers for monitoring and managing WatchGuard firewall hardware, enabling the collection of critical performance metrics such as interface traffic counters, session states, CPU utilization, memory usage, and system health status via SNMP.
The WATCHGUARD-CLIENT-MIB facilitates the monitoring and management of endpoint client status, connection states, and security posture data within WatchGuard Firebox and XTM appliance environments via SNMP. This module enables administrators to track active client sessions, authentication states, and client-specific policy enforcement metrics for centralized network visibility.
The WATCHGUARD-HA-MIB module facilitates the monitoring of high availability cluster states and failover events on WatchGuard firewalls, specifically tracking HA synchronization status, node roles, and link health to ensure continuous service availability.
The WATCHGUARD-POLICY-MIB enables SNMP-based monitoring and management of WatchGuard firewall policy configurations, including rule definitions, policy states, and associated traffic control parameters. This module facilitates the retrieval of specific policy objects to verify rule enforcement and audit security settings on WatchGuard network security appliances.