WATCHGUARD-SYSTEM-CONFIG-MIB
The WATCHGUARD-SYSTEM-CONFIG-MIB provides SNMP access to retrieve and modify persistent configuration parameters on WatchGuard Firebox firewalls, including system identity, network interface settings, and global service states. This module enables centralized management of device-level operational settings rather than real-time traffic statistics or session counters.
Imported Objects
Objects
15 total| Object Name |
|---|
wgSystemConfigMIBThe MIB module to describe WatchGuard Firebox system configuration. MODULE-IDENTITY .1.3.6.1.4.1.3097.2 |
wgSysTrapsThis is the base object for system wide traps in this entity. OBJECT IDENTIFIER .1.3.6.1.4.1.3097.2.3 |
wgSysTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.3097.2.3.0 |
wgAlarmTrapAn alarm was raised by Monitoring Agent of this WatchGuard entity. NOTIFICATION-TYPE .1.3.6.1.4.1.3097.2.3.0.1 |
wgSnmpStartThis trap is sent when the snmp starts. NOTIFICATION-TYPE .1.3.6.1.4.1.3097.2.3.0.2 |
wgSnmpShutdownThis trap is sent when the snmp terminates. NOTIFICATION-TYPE .1.3.6.1.4.1.3097.2.3.0.3 |
wgSysTrapObjectsThis is the base object for objects which are used as part of traps. OBJECT IDENTIFIER .1.3.6.1.4.1.3097.2.4 |
wgAlarmIdThe id of the alarm that generates a trap.ro Integer32 .1.3.6.1.4.1.3097.2.4.1 |
wgAlarmLabelThe name of the alarm that generates a trap.ro OCTET STRING .1.3.6.1.4.1.3097.2.4.2 |
wgAlarmTimeThe date and time of the alarm that generates a trap.ro OCTET STRING .1.3.6.1.4.1.3097.2.4.3 |
wgAlarmLevelThe level of an alarm generated.ro Enumeration .1.3.6.1.4.1.3097.2.4.4 |
wgAlarmHostnameThe host name of the system where alarm occurredro OCTET STRING .1.3.6.1.4.1.3097.2.4.5 |
wgAlarmMsgThe message describing the nature of this alarm.ro OCTET STRING .1.3.6.1.4.1.3097.2.4.6 |
wgSysTrapControlThis is the base object identifier for all objects which are trap control for the entity. OBJECT IDENTIFIER .1.3.6.1.4.1.3097.2.5 |
wgAlarmTrapEnableIndicates whether wgAlarmTrap trap should be generated.ro Enumeration .1.3.6.1.4.1.3097.2.5.1 |
More MIBs from Watchguard
Browse all WatchguardMIBs →The WATCHGUARD-IPSEC-SA-MON-MIB-EXT module enables monitoring of IPSec Security Association states and statistics on WatchGuard firewalls, extending the IETF IPsec Monitor MIB to track SA establishment, termination, and traffic volume counters.
The WATCHGUARD-IPSEC-TUNNEL-MIB enables monitoring and management of IPsec tunnel interface states, traffic counters, and security association parameters on WatchGuard firewalls. It provides granular visibility into tunnel establishment status, packet throughput, and error statistics for troubleshooting encrypted site-to-site or remote access connections.
The WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB monitors WatchGuard security gateways to aggregate and report the status of IPSec Security Associations (SAs) between specific pairs of gateway IP addresses. It provides the data required to construct a topological view of IPSec tunnels by tracking the count and state of tunnel-mode SAs established between any two external IP endpoints.
The WATCHGUARD-PRODUCTS-MIB provides object identifiers for monitoring and managing WatchGuard firewall hardware, enabling the collection of critical performance metrics such as interface traffic counters, session states, CPU utilization, memory usage, and system health status via SNMP.
The WATCHGUARD-CLIENT-MIB facilitates the monitoring and management of endpoint client status, connection states, and security posture data within WatchGuard Firebox and XTM appliance environments via SNMP. This module enables administrators to track active client sessions, authentication states, and client-specific policy enforcement metrics for centralized network visibility.
The WATCHGUARD-HA-MIB module facilitates the monitoring of high availability cluster states and failover events on WatchGuard firewalls, specifically tracking HA synchronization status, node roles, and link health to ensure continuous service availability.