WAN-OPT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for WAN-OPT-MIB.
89
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
89 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.2 |
cdx6500GCTLANConnectionTableA list of parameters for configuring LAN Connections. SEQUENCE OF Cdx6500GCTLANConnectionEntry .1.3.6.1.4.1.449.2.1.2.2.16 |
cdx6500GCTLANConnectionEntryEach entry contains the Configuration parameters
for each LAN Connection. Cdx6500GCTLANConnectionEntry .1.3.6.1.4.1.449.2.1.2.2.16.1 |
cdx6500WAEntryNumberThis is a standard table entry number.
It identifies a specific LAN Connection Record
within the table.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.1 |
cdx6500WALanForwarderTypeThis parameter specifies the type of forwarders
communicating over this LAN Connection.
brid - Bridging Forwarders.
rout - Routing Forwarders.
brout - Bridging and Routing Forwarders.
nc - Skipped during configuration.
newvalBrid - same functionality as 'brid', new enumeration
added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.16.1.2 |
cdx6500WABridgeLinkNumberThis parameter specifies the Bridge-Link that is
using this LAN Connection.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.3 |
cdx6500WARouterInterfaceNumThis parameter specifies the Router Interface
that is using this LAN Connection.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.4 |
cdx6500WACfgEncapsulationTypeThis parameter specifies the data encapsulation
type used over this LAN Connection.
This object has been deprecated, use cdx6500WACfgEncapType
instead.rodeprecated Enumeration .1.3.6.1.4.1.449.2.1.2.2.16.1.5 |
cdx6500WAAutocallMnemonicIf configured, the Autocall Mnemonic references
a remote address which will be called by the
LAN Connection.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.2.16.1.6 |
cdx6500WAAutocallTimeoutThis is the time interval in seconds between
call attempts when auto calling.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.7 |
cdx6500WAMaxAutocallAttemptsThis parameter is used to specify the number
of times that the LAN Connection will attempt
to autocall a remote destination. A value of
zero will allow unlimited attempts.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.8 |
cdx6500WARemoteConnectionIdThis parameter specifies the number of the remote
LAN Connection or the FRA Station number that
this LAN connection will attempt to connect to
if configured for autocall.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.9 |
cdx6500WABillingRecordsThis controls whether billing (accounting)
records will be created for calls on this
LAN Connection.
off : Billing records will not be created.
on : Billing records will be created.
nc : Skipped during configuration.
newvalOff : same functionality as 'off', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.16.1.10 |
cdx6500WADataPassingPriorityThis parameter specifies the Traffic Priority
of this LAN Connection.
low - Low Priority.
med - Medium Priority.
high - High Priority.
exp - Expedite Priority.
nc - Skipped during configuration.
newvalLow - same functionality as 'low', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.16.1.11 |
cdx6500WALCONQueueLimitThis parameter specifies the maximum number of bytes that
will be queued for this LCON befor transmission on the WAN
link. It is recommended that this parameter be set for two
seconds of data on the WAN link.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.12 |
cdx6500WACfgEncapTypeThis parameter specifies the data encapsulation
type used over this LAN Connection.
codex - Codex Proprietary Encapsulation.
rfc1294 - RFC 1294 Multiprotocol Encapsulation.
rfc877 - RFC 877 Multiprotocol Encapsulation.
nc - Skipped during configuration.
newvalCodex - same functionality as 'codex', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.16.1.13 |
cdx6500WACfgOnDemandThis parameter controls whether the circuit is established
at startup or established when required for data passing.
disabled - Circuit is established at start up.
enabled - Circuit is established on demand.
nc - Skipped during configuration.
newvalDisabled - same functionality as 'disabled', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.16.1.14 |
cdx6500WACfgIdleTimeoutThis parameter specifies the amount of time in seconds the
circuit will remain connected without passing any data
before being brought down. Setting the parameter to zero
keeps the circuit up indefinitelyro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.15 |
cdx6500WACfgLanConnectionTypeThis parameter specifies whether the LAN Connection defines
a point to point connection across the WAN, or is part of
a group of LAN Connections.
ptToPt - Point to Point LAN Connection.
group - Member of a LAN Connection Group.
nc - Skipped during configuration.
newvalPtToPt - same functionality as 'ptToPt', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.16.1.16 |
cdx6500WACfgNexthopIpAddressThis parameter specifies the IP address of the Router
Interface on the other end of this LAN Connection, which
is the next hop on the path to the final destination. A
setting of 0.0.0.0 causes this parameter to be ignored.ro IpAddress .1.3.6.1.4.1.449.2.1.2.2.16.1.17 |
cdx6500WACfgNexthopIpxNodeNumberThis parameter specifies the IPX node number of the Router
on the other end of this LAN Connection, which is the next
hop on the path to the final destination. A setting of 0
causes this parameter to be ignored.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.18 |
cdx6500WACfgParallelSvcThis parameter specifies the maximum number of parallel
connections that can be established to the remote destination.
Parallel SVCs are established when congestion thresholds are
reached on active connections.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.19 |
cdx6500WACfgParallelThresholdThis parameter specifies the number of outstanding data
bytes that will trigger the establishment of a Parallel SVC.
If this number of data bytes has been transmitted without
acknowledgment, the receipt of additional data for
transmission will trigger Parallel SVC establishment.
Note that this parameter must be configured with a value
less than the LCON Queue Limit parameter.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.16.1.20 |
cdx6500WACfgParallelPortThis parameter specifies the port that Parallel
SVCs should be brought up over. The parameter
can be in two forms. It can be in the form of a port
identifier string. For example, to bring Parallel
SVCs up over X25 port number 8, enter the string
X25-8. It can also be in the form of a Switched
Services Table destination name, if the port that
the Parallel SVCs are to come up over is a dial on
demand port. A value of (blank) will cause Parallel
SVCs to be brought up over the same port as the main
connection.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.2.16.1.21 |
cdx6500WACfgBroadcastThis parameter specifies whether broadcast datagrams
should be transmitted over this LAN Connection to
the remote destination.
disabled : Broadcast datagrams will not be transmitted
over this LAN Connection.
enabled : Broadcast datagrams will be transmitted
over this LAN Connection.
nc : Skipped during configuration.
newvalDisabled : same functionality as 'disabled', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.16.1.22 |
cdx6500GCTWanAdaptorGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.2.17 |
cdx6500GCMaxLCONDefines the maximum number of LAN Connections
that may be configured.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.17.1 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTLANConnectionGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.6 |
cdx6500LCTDataSummaryStatsData summary statstics provides the information on
data packets transmitted, received, queued and discarded. SEQUENCE OF Cdx6500WADataStatEntry .1.3.6.1.4.1.449.2.1.3.1.6.1 |
cdx6500WADataStatEntryLAN Connection Record number. Cdx6500WADataStatEntry .1.3.6.1.4.1.449.2.1.3.1.6.1.1 |
cdx6500WALanConnNumberDataIt identifies a specific LAN Connection Record.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.6.1.1.1 |
cdx6500WALastStatResetTimeThe date and time of the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.6.1.1.2 |
cdx6500WAAvgPktSizeTxSpecifies the average size of the packets sent on
the WAN, in bytes.ro Counter16 .1.3.6.1.4.1.449.2.1.3.1.6.1.1.3 |
cdx6500WACurTxQueueDepthSpecifies the current number of packets queued
awaiting transmission on the WAN, in packets.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.1.1.4 |
cdx6500WAMaxTxQueueDepthSpecifies the maximum number of packets queued
awaiting transmission on the WAN, in packets.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.1.1.5 |
cdx6500WAMaxTxQDepthTimeThe date and time when the number of packets queued
awaiting transmission on the WAN reached its maximum.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.6.1.1.6 |
cdx6500WAAvgPktSizeRcvSpecifies the average size of the packets received on
the WAN, in bytes.ro Counter16 .1.3.6.1.4.1.449.2.1.3.1.6.1.1.7 |
cdx6500WATxPktDiscardFrwdReqThis is a non-supported object.rodeprecated Counter .1.3.6.1.4.1.449.2.1.3.1.6.1.1.8 |
cdx6500WATxPktDiscardTransDelaySpecifies the number of packets discarded due to
packets exceeding the maximum allowed delay through
the node.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.1.1.9 |
cdx6500WATxPktDiscardCongSpecifies the number of packets discarded due to
severe congestion.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.1.1.10 |
cdx6500WATxPktDiscardMaxFrameSpecifies the number of packets discarded due to
packets exceeding the maximum allowed frame size.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.1.1.11 |
cdx6500WATxPktDiscardCLrReqSpecifies the number of packets discarded due to
Clear Requests Received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.1.1.12 |
cdx6500WATxPktDiscardCallEstabSpecifies the number of packets discarded due to
Call Establishment Failure.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.1.1.13 |
cdx6500WABytesOutstandingCount of outstanding transmit bytes .ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.1.1.14 |
cdx6500LCTCallSummaryStatsA list of Call Summary Statistics for LAN connection. SEQUENCE OF Cdx6500WACallStatEntry .1.3.6.1.4.1.449.2.1.3.1.6.2 |
cdx6500WACallStatEntryLAN Connection Record number. Cdx6500WACallStatEntry .1.3.6.1.4.1.449.2.1.3.1.6.2.1 |
cdx6500WALanConnNumberCallIt identifies a specific LAN Connection Record.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.6.2.1.1 |
cdx6500WAConnectionTypeSpecifies whether the connection is a Permanent Virtual
Circuit (PVC) or a Switched Virtual Circuit (SVC).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.6.2.1.2 |
cdx6500WAStatEncapsulationTypeThis parameter specifies the data encapsulation
type used over this LAN Connection.
codex - Codex Proprietary Encapsulation.
rfc1294 - RFC 1294 Multiprotocol Encapsulation.
rfc877 - RFC 877 Multiprotocol Encapsulation.
newvalCodex - same functionality as 'codex', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.6.2.1.3 |
cdx6500WAConnectionStateSpecifies the current state of the Permanent Virtual
Circuit (PVC) or a Switched Virtual Circuit (SVC).
unconfigured : Init state.
backinHeap : LCONCB has been returned to memory heap.
notConnected : Completed Init, waiting for startup,
or failed autocall SVC.
disabled : Connection is Disabled.
calling : Autocall SVC trying to complete call.
waitForCall : Non-autocall SVC waiting for call.
handshaking : PVC in reset handshake process.
connected : Connection is established.
connectedCongested : Connection has reached congestion thresh.
wfccRecall : Wait for Clr Conf Re-Call, autocall SVC.
wfccWaitForCall : Wait for Clr Conf Wait for Call non-auto
: calling SVC.
wfccDisabled : Wait for Clr Conf goto Disabled.
newvalUnconfigured : same functionality as 'unconfigured', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.6.2.1.4 |
cdx6500WAForwardersConnectedSpecifies which forwarders are currently connected
to this LAN Connection .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.6.2.1.5 |
cdx6500WARemoteAddressSpecifies the called address of the remote WAN Adaptor
LAN Connection for connected SVCs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.6.2.1.6 |
cdx6500WANumAutocallAttemptsSpecifies the number of times attempted to autocall
before either succeeded or failed in establishing the
connection.ro Counter8 .1.3.6.1.4.1.449.2.1.3.1.6.2.1.7 |
cdx6500WALastClearCauseCodeThis is the cause code in the call clear packet last
received by the LAN connection and explains why the
last call was cleared.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.6.2.1.8 |
cdx6500WALastClearDiagCodeThis is the diagnostic code in the call clear packet
last received by the LAN connection and explains why
the last call was cleared.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.6.2.1.9 |
cdx6500WAParallelSvcsEstabCount of parallel SVCs with calls established.ro Counter16 .1.3.6.1.4.1.449.2.1.3.1.6.2.1.10 |
cdx6500WAParallelSvcsConfiguredNumber of Parallel SVCs.ro Counter8 .1.3.6.1.4.1.449.2.1.3.1.6.2.1.11 |
cdx6500LCTPacketSummaryStatsA list of Packet Summary Statistics for LAN connection. SEQUENCE OF Cdx6500WAPktStatEntry .1.3.6.1.4.1.449.2.1.3.1.6.3 |
cdx6500WAPktStatEntryLAN Connection Record number. Cdx6500WAPktStatEntry .1.3.6.1.4.1.449.2.1.3.1.6.3.1 |
cdx6500WALanConnNumberPktIt identifies a specific LAN Connection Record.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.6.3.1.1 |
cdx6500WADataPktTxSpecifies the total number of Data Packets sent on the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.2 |
cdx6500WADataPktRcvSpecifies the total number of Data Packets received
from the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.3 |
cdx6500WACallReqPktsTxSpecifies the total number of Call Request Packets
sent on the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.4 |
cdx6500WACallReqPktsRcvSpecifies the total number of Call Request Packets
received from the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.5 |
cdx6500WACallAcceptPktsTxSpecifies the total number of Call Accept Packets
sent on the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.6 |
cdx6500WACallAcceptPktsRcvSpecifies the total number of Call Accept Packets
received from the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.7 |
cdx6500WAClearReqPktsTxSpecifies the total number of Clear Request Packets
sent on the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.8 |
cdx6500WAClearReqPktsRcvSpecifies the total number of Clear Request Packets
received from the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.9 |
cdx6500WAClearConfPktsTxSpecifies the total number of Clear Confirm Packets
sent on the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.10 |
cdx6500WAClearConfPktsRcvSpecifies the total number of Clear Confirm Packets
received from the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.11 |
cdx6500WAResetReqPktsTxSpecifies the total number of Reset Request Packets
sent on the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.12 |
cdx6500WAResetReqPktsRcvSpecifies the total number of Reset Request Packets
received from the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.13 |
cdx6500WAResetConfPktsTxSpecifies the total number of Reset Confirm Packets
sent on the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.14 |
cdx6500WAResetConfPktsRcvSpecifies the total number of Reset Confirm Packets
received from the WAN.ro Counter .1.3.6.1.4.1.449.2.1.3.1.6.3.1.15 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |
cdx6500ContWANAdaptor OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4.1 |
cdx6500ContWANAdaptorTableControl parameters for the LAN Connection. SEQUENCE OF Cdx6500ContWANAdaptorEntry .1.3.6.1.4.1.449.2.1.4.1.1 |
cdx6500ContWANAdaptorEntryEach control applies to a single LAN Connection. Cdx6500ContWANAdaptorEntry .1.3.6.1.4.1.449.2.1.4.1.1.1 |
cdx6500WAControlLanConnNumberThis identifies a specific LAN Connection Record.ro INTEGER .1.3.6.1.4.1.449.2.1.4.1.1.1.1 |
cdx6500WALanConnEnableDisableThis command enables or disables a specified LAN connection.
newvalEnable : same functionality as 'enable', new enumeration
added for RFC1155 compatibility.rw Enumeration .1.3.6.1.4.1.449.2.1.4.1.1.1.2 |
cdx6500WALanConnBootThis command causes the LAN connection record to be booted.rw Enumeration .1.3.6.1.4.1.449.2.1.4.1.1.1.3 |
cdx6500WALanConnResetStatWhen this command is entered the resettable statistics
parameters are reset for the specified LAN Connection Number.rw Enumeration .1.3.6.1.4.1.449.2.1.4.1.1.1.4 |