WAG302
AI MIB Summary
The WAG302 MIB module enables SNMP-based monitoring and management of NetGear WAG302 802.11a/b/g ProSafe Wireless Access Points, specifically exposing 802.11 layer parameters, interface statistics, and radio operational states. This module facilitates the collection of critical wireless metrics such as association counts, signal strength, retransmission rates, and beacon intervals to assess network health and performance.
The MIB module for 802.11a/b/g ProSafe Wireless Access Point entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).wireless(4).wag302(7)
Main OID:
wag302.1.3.6.1.4.1.4526.4.7
179
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
179 total| Object Name |
|---|
netgear OBJECT IDENTIFIER .1.3.6.1.4.1.4526 |
wireless OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4 |
wag302The MIB module for 802.11a/b/g ProSafe Wireless Access Point entities.
iso(1).org(3).dod(6).internet(1).private(4).
enterprises(1).netgear(4526).wireless(4).wag302(7) MODULE-IDENTITY .1.3.6.1.4.1.4526.4.7 |
lanSettings OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.1 |
apNameThe field indicates the name of AP. The name is also the NETBIOS name of the AP.rw DisplayString .1.3.6.1.4.1.4526.4.7.1.1 |
sysMacAddressThis field indicates the system MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.1.2 |
sysVersionThis field indicates the system firmware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.1.3 |
sysCountryRegionThis attribute shall indicate the region of operation
for which which the wireless interface is intended.rw Enumeration .1.3.6.1.4.1.4526.4.7.1.4 |
adminNameThe field indicates the administrator name.obsolete DisplayString .1.3.6.1.4.1.4526.4.7.1.5 |
adminPasswdThe field indicates the administrator password.
The AP can be managed in such way as utility,telnet
and so on.obsolete DisplayString .1.3.6.1.4.1.4526.4.7.1.6 |
dhcpStatusThis attribute shall indicate whether dhcp client status.rw Enumeration .1.3.6.1.4.1.4526.4.7.1.7 |
ipAddrThe field indicates the IP address of AP on the wireless
interface,when worked in router or router/bridge mode.
Ethernet and wireless interface share the same IP address,
when worked in bridge mode.rw IpAddress .1.3.6.1.4.1.4526.4.7.1.8 |
netmaskAddrThe field indicates the netmask of AP on the wireless
interface,when worked in router or router/bridge mode.
Ethernet and wireless interface share the same netmask
address,when worked in bridge mode.rw IpAddress .1.3.6.1.4.1.4526.4.7.1.9 |
gatewayAddrThe field indicates the gateway of AP on the wireless
interface,when worked in router or router/bridge mode.
Ethernet and wireless interface share the same gateway
address,when worked in bridge mode.rw IpAddress .1.3.6.1.4.1.4526.4.7.1.10 |
pridnsipAddrThis attributes shall indicates the IP address of the primary DNS server.
***The value can only be set to an IP address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.1.11 |
snddnsipAddrThis attributes shall indicates the IP address of the secondary DNS server.
***The value can only be set to an IP address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.1.12 |
spantreeThis attribute shall indicate spanning tree.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.1.13 |
vlanEnableThis attribute shall indicate whether enable VLAN(802.1Q).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.1.14 |
managementVlanIDThis attribute shall indicate the Management VLAN ID.ro INTEGER .1.3.6.1.4.1.4526.4.7.1.15 |
untaggedVlanIDThis attribute shall indicate the Untagged VLAN ID.ro INTEGER .1.3.6.1.4.1.4526.4.7.1.16 |
wlanSettingTablewlanSettingsallow for multiple instances on an agent. SEQUENCE OF WlanSettingEntry .1.3.6.1.4.1.4526.4.7.2 |
wlanSettingEntryAn entry in the wlanSettingTable. It is possible for
there to be multiple AP interfaces on one agent,
each with its unique MAC address. The relationship
between an AP interface and an interface in the context
of the Internet-standard MIB is one-to-one.
As such, the value of an ifIndex object instance can be
directly used to identify corresponding instances of the
objects defined herein. WlanSettingEntry .1.3.6.1.4.1.4526.4.7.2.1 |
operatemodeThis attribute shall indicate the desired wireless operating mode.
The option are:
auto - Both 802.11g and 802.11b wireless stations can be used.
dot11a - Only 802.11a wireless stations can be used.
dot11b - All 802.11b wireless stations can be used.
802.11g wireless stations can still be used
if they can operate in 802.11b mode.
dot11g - Only 802.11g wireless stations can be used.ro Enumeration .1.3.6.1.4.1.4526.4.7.2.1.1 |
radioEnableThis attribute shall indicate whether the radio is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.2.1.2 |
channelThis attribute shall indicate the channel number to be
used.rw INTEGER .1.3.6.1.4.1.4526.4.7.2.1.3 |
datarateThis attribute shall indicate the transmite rate. When
the operatemode is:
auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s,
5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9Mb/s,
12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s,
48:48Mb/s, and 54:54Mb/s.
dot11a(1) - can set to 0:best, 6:6Mb/s, 9:9Mb/s,
12:12Mb/s, 18:18Mb/s, 24:24Mb/s,
36:36Mb/s, 48:48Mb/s and 54:54Mb/s.
dot11b(2) - can set to 0:best, 1:1Mb/s, 2:2Mb/s,
5.5:5.5Mb/s, and 11:11 Mb/s.
dot11g(3) - can set to 0:best, 6:6Mb/s, 9:9Mb/s,
12:12Mb/s, 18:18Mb/s, 24:24Mb/s,
36:36Mb/s, 48:48Mb/s and 54:54Mb/s.ro Enumeration .1.3.6.1.4.1.4526.4.7.2.1.4 |
wmmSupportThis field indicates whether support WMM(Wireless Multimedia).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.2.1.5 |
beaconintervalThis attribute shall indicate the Beacon Interval.rw INTEGER .1.3.6.1.4.1.4526.4.7.2.1.6 |
rtsthresholdThis attribute shall indicate the RTS threshold.rw INTEGER .1.3.6.1.4.1.4526.4.7.2.1.7 |
fraglengthThis attribute shall indicate the fragmentation threshold.rw INTEGER .1.3.6.1.4.1.4526.4.7.2.1.8 |
dtimintervalThis attribute shall indicate the DTIM period.rw INTEGER .1.3.6.1.4.1.4526.4.7.2.1.9 |
preambletypeThis attribute shall indicate the preamble setting.
This setting is only applicable to 802.11b mode.ro Enumeration .1.3.6.1.4.1.4526.4.7.2.1.10 |
txpowerThis attribute shall indicate the tranmiste power.rw Enumeration .1.3.6.1.4.1.4526.4.7.2.1.11 |
superGThis attribute shall indicate whether super mode (super-A
for 11a radio, Super-G for 11g radio) is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.2.1.12 |
accessControlModeThe field indicates whether the access control list is
enabled and the source of the database of the access
control list.ro Enumeration .1.3.6.1.4.1.4526.4.7.2.1.13 |
antennaThis attribute shall indicate the tranmistted power.rwobsolete Enumeration .1.3.6.1.4.1.4526.4.7.2.1.14 |
vapSetting OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.3 |
vapWepAndGlobalSettingTableVAP attributes setting table. SEQUENCE OF VapWepAndGlobalSettingEntry .1.3.6.1.4.1.4526.4.7.3.1 |
vapWepAndGlobalSettingEntryVAP attributes setting table. VapWepAndGlobalSettingEntry .1.3.6.1.4.1.4526.4.7.3.1.1 |
wepKeyTypeThe field shall indicate the type of WEP key.rw Enumeration .1.3.6.1.4.1.4526.4.7.3.1.1.1 |
key1The field indicates the key value of the first default wep key.rw DisplayString .1.3.6.1.4.1.4526.4.7.3.1.1.2 |
key2The field indicates the key value of the second default wep key.rw DisplayString .1.3.6.1.4.1.4526.4.7.3.1.1.3 |
key3The field indicates the key value of the third default wep key.rw DisplayString .1.3.6.1.4.1.4526.4.7.3.1.1.4 |
key4The field indicates the key value of the fourth default wep key.rw DisplayString .1.3.6.1.4.1.4526.4.7.3.1.1.5 |
wepPassPhraseThis attribute shall indicate WEP pass phrase, used to
generate four WEP keys.rw DisplayString .1.3.6.1.4.1.4526.4.7.3.1.1.6 |
vapSettingTableVAP attributes setting table. SEQUENCE OF VapSettingEntry .1.3.6.1.4.1.4526.4.7.3.2 |
vapSettingEntryVAP attributes setting table. VapSettingEntry .1.3.6.1.4.1.4526.4.7.3.2.1 |
vapIndexDescription.ro INTEGER .1.3.6.1.4.1.4526.4.7.3.2.1.1 |
vapEnableThis attribute shall indicate whether enable VAP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.3.2.1.2 |
ssidThis attribute shall indicate SSID.Its length can't be large than 33 .rw DisplayString .1.3.6.1.4.1.4526.4.7.3.2.1.3 |
hidenetworknameThis attribute shall indicate whether broadcast wireless network Name (SSID).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.3.2.1.4 |
vlanIDThis attribute shall indicate the VLAN ID.rw INTEGER .1.3.6.1.4.1.4526.4.7.3.2.1.5 |
securityProfileNameDescription.rw DisplayString .1.3.6.1.4.1.4526.4.7.3.2.1.6 |
presharekeyThis attribute shall indicate preshare key.rw DisplayString .1.3.6.1.4.1.4526.4.7.3.2.1.7 |
authenticationtypeThe field indicates how to authenticate the station.rw Enumeration .1.3.6.1.4.1.4526.4.7.3.2.1.8 |
encryptionThe field indicates how to encryption the station.rw Enumeration .1.3.6.1.4.1.4526.4.7.3.2.1.9 |
keynoThe field indicates the number of default wep key.rw INTEGER .1.3.6.1.4.1.4526.4.7.3.2.1.10 |
wlanseparatorThis attribute shall indicate whether enable No see.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.3.2.1.11 |
remoteSettings OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.4 |
sshdThis attribute shall indicate whether the SSH is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.4.1 |
snmpenableThis attribute shall indicate whether the SNMP agent is
enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.4.2 |
trapServerIPThe field indicates the trap server IP address.
***The value can only be set to an IP address in dot
format.rw IpAddress .1.3.6.1.4.1.4526.4.7.4.3 |
trapServerCommunityThe field indicates the community name for traps.rw DisplayString .1.3.6.1.4.1.4526.4.7.4.4 |
readOnlyCommunityThe field indicates the read only community name.
***The value can only be set to 1 to 32 readable string.rw DisplayString .1.3.6.1.4.1.4526.4.7.4.5 |
readWriteCommunityThe field indicates the read write community name.
***The value can only be set to 1 to 32 readable string.rw DisplayString .1.3.6.1.4.1.4526.4.7.4.6 |
statistic OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.5 |
wiredethernetstat OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.5.1 |
lanrecvpacketthe field indicates the sum of received packets.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.1.1 |
lantranspacketthe field indicates the sum of transmitted packets.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.1.2 |
lanrecvbytesthe field indicates the sum of received bytes.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.1.3 |
lantransbytesthe field indicates the sum of transmitted bytes.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.1.4 |
wirelessStatTableDescription. SEQUENCE OF WirelessStatEntry .1.3.6.1.4.1.4526.4.7.5.2 |
wirelessStatEntryDescription. WirelessStatEntry .1.3.6.1.4.1.4526.4.7.5.2.1 |
wlanrecvunicastpacketthe field indicates the sum of received unicast packets.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.2.1.1 |
wlantransunicastpacketthe field indicates the sum of transmitted unicast packets.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.2.1.2 |
wlanrecvbroadcastpacketthe field indicates the sum of received broadcast packets.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.2.1.3 |
wlantransbroadcastpacketthe field indicates the sum of transmitted broadcast packets.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.2.1.4 |
wlanrecvmulticastpacketthe field indicates the sum of received multicast packets.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.2.1.5 |
wlantransmulticastpacketthe field indicates the sum of transmitted multicast packets.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.2.1.6 |
wlanrecvpacketthe field indicates the sum of received packets.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.2.1.7 |
wlantranspacketthe field indicates the sum of transmitted packets.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.2.1.8 |
wlanrecvbytesthe field indicates the sum of received bytes.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.2.1.9 |
wlantransbytesthe field indicates the sum of transmitted bytes.ro Unsigned32 .1.3.6.1.4.1.4526.4.7.5.2.1.10 |
stationListTablestationList Table show multiple instances on an agent. SEQUENCE OF StationListEntry .1.3.6.1.4.1.4526.4.7.6 |
stationListEntryAn entry in the wlanClientsTable. It is possible for there
to be multiple AP interfaces on one agent, each with its
unique MAC address. The relationship between an AP
interface and an interface in the context of the Internet-
standard MIB is one-to-one. As such, the value of an
ifIndex object instance can be directly used to identify
corresponding instances of the objects defined herein. StationListEntry .1.3.6.1.4.1.4526.4.7.6.1 |
macaddressThis attribute shall indicate MAC address of the
associated stationID.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.6.1.1 |
clientIpaddrThis attribute shall indicate Ip address of the associated stationID.ro IpAddress .1.3.6.1.4.1.4526.4.7.6.1.2 |
clientWirelessModeThis attribute shall indicate the wireless mode of the
associated stationID.ro Enumeration .1.3.6.1.4.1.4526.4.7.6.1.3 |
stationstatusThis attribute shall indicate the status of station.ro Enumeration .1.3.6.1.4.1.4526.4.7.6.1.4 |
wlanWdsTableWDS attributes in tablular form to allow for multiple
instances on an agent. SEQUENCE OF WlanWdsEntry .1.3.6.1.4.1.4526.4.7.7 |
wlanWdsEntryAn entry in the wlanWdsTable. It is possible for there to
be multiple AP interfaces on one agent, each with its
unique MAC address. The relationship between an AP
interface and an interface in the context of the Internet-
standard MIB is one-to-one. As such, the value of an
ifIndex object instance can be directly used to identify
corresponding instances of the objects defined herein. WlanWdsEntry .1.3.6.1.4.1.4526.4.7.7.1 |
apmodeThis a command field for conntrol AP operation mode.ro Enumeration .1.3.6.1.4.1.4526.4.7.7.1.1 |
ptpremotemacaddressThis attribute shall indicate the stationID.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.7.1.2 |
pxpremotemacaddress1This attribute shall indicate the stationID.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.7.1.3 |
pxpremotemacaddress2This attribute shall indicate the stationID.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.7.1.4 |
pxpremotemacaddress3This attribute shall indicate the stationID.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.7.1.5 |
pxpremotemacaddress4This attribute shall indicate the stationID.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.7.1.6 |
repremotemacaddress1This attribute shall indicate the stationID.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.7.1.7 |
repremotemacaddress2This attribute shall indicate the stationID.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.7.1.8 |
repremotemacaddress3This attribute shall indicate the stationID.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.7.1.9 |
repremotemacaddress4This attribute shall indicate the stationID.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.7.1.10 |
localMacAddressThis attribute shall indicate the local MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.7.1.11 |
info802dot1x OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.8 |
authinfo OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.8.1 |
priradipaddrInternet address of the Primary Radius Server.rw IpAddress .1.3.6.1.4.1.4526.4.7.8.1.1 |
priradportPort number used for authentication at the
Primary Radius Server.rw INTEGER .1.3.6.1.4.1.4526.4.7.8.1.2 |
priradsharedsecretSecret shared between NAS and the Primary Radius Server.rw DisplayString .1.3.6.1.4.1.4526.4.7.8.1.3 |
sndradipaddrInternet address of the Second Radius Server.rw IpAddress .1.3.6.1.4.1.4526.4.7.8.1.4 |
sndradportPort number used for authentication at
the Second Radius Server.rw INTEGER .1.3.6.1.4.1.4526.4.7.8.1.5 |
sndradsharedsecretSecret shared between NAS and the Second Radius Server.rw DisplayString .1.3.6.1.4.1.4526.4.7.8.1.6 |
accntinfo OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.8.2 |
priacntipaddrIP address of the Primary radius account server.rw IpAddress .1.3.6.1.4.1.4526.4.7.8.2.1 |
priacntportport number of the Primary radius account server.rw INTEGER .1.3.6.1.4.1.4526.4.7.8.2.2 |
priacntsharedsecretpassword used by the ap to connect to the Primary radius account serve.rw DisplayString .1.3.6.1.4.1.4526.4.7.8.2.3 |
sndacntipaddrIP address of the Second radius account server.rw IpAddress .1.3.6.1.4.1.4526.4.7.8.2.4 |
sndacntportport number of the Second radius account server.rw INTEGER .1.3.6.1.4.1.4526.4.7.8.2.5 |
sndacntsharedsecretpassword used by the ap to connect to the Second radius account server.rw DisplayString .1.3.6.1.4.1.4526.4.7.8.2.6 |
userCommand OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.9 |
resetAPThis a command field for conntrol AP action. Write value 1
to reset the AP.rw INTEGER .1.3.6.1.4.1.4526.4.7.9.1 |
timeSettings OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.10 |
currenttimeThis field indicates the current system time in a format:
YYYY/MM/DD hh:mm:ss.ro DisplayString .1.3.6.1.4.1.4526.4.7.10.1 |
timezoneThis field indicates the timezone of the system.rw Enumeration .1.3.6.1.4.1.4526.4.7.10.2 |
daylightsavingThis attribute shall indicate the Daylight Saving time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.10.3 |
dhcpsSettings OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.11 |
dhcpserverThis attribute shall indicate whether DHCP server is enable
or disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.11.1 |
dhcpsipstartThis attribute indicates the starting IP address of DHCP server will give.
***The value can only be set to a IP address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.11.2 |
dhcpsipendThis attribute indicates the ending IP address of DHCP server will give.
***The value can only be set to a IP address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.11.3 |
dhcpnetmaskThis attribute indicates the net mask of DHCP server will give.
***The value can only be set to the net mask address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.11.4 |
dhcpsgatewayThis attribute indicates the gateway IP address of DHCP server will give.
***The value can only be set to a IP address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.11.5 |
dhcpspridnsThis attribute indicates the primary DNS IP address of DHCP server will give.
***The value can only be set to a IP address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.11.6 |
dhcpspsnddnsThis attribute indicates the secondary DNS IP address of DHCP server will give.
***The value can only be set to a IP address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.11.7 |
dhcpspriwinsThis attribute indicates the primary WINS IP address of DHCP server will give.
***The value can only be set to a IP address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.11.8 |
dhcpspsndwinsThis attribute indicates the secondary WINS IP address of DHCP server will give.
***The value can only be set to a IP address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.11.9 |
dhcpsleasetimeThis attribute shall indicate the IP lease time of DHCP server will give
to DHCP clients in minutesrw INTEGER .1.3.6.1.4.1.4526.4.7.11.10 |
logSettings OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.12 |
syslogThis attribute shall indicate whether syslog is enable
or disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.12.1 |
syslogsrvipThis attributes shall indicates the IP address of the syslog server.
***The value can only be set to a IP address in dot format.rw IpAddress .1.3.6.1.4.1.4526.4.7.12.2 |
syslogsrvportThis attributes shall indicates the Port of the Syslog server.
*** The value can only be set to a port in dot format.rw INTEGER .1.3.6.1.4.1.4526.4.7.12.3 |
httpRedirectSettings OBJECT IDENTIFIER .1.3.6.1.4.1.4526.4.7.13 |
httpRedirectEnableDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.13.1 |
httpRedirectURLDescription.rw DisplayString .1.3.6.1.4.1.4526.4.7.13.2 |
detectedApTabledetectedAp Table shows list of detected neighbouring APs. SEQUENCE OF DetectedApEntry .1.3.6.1.4.1.4526.4.7.14 |
detectedApEntryAn entry in the detectedApTable. DetectedApEntry .1.3.6.1.4.1.4526.4.7.14.1 |
apmacThis attribute shall indicate MAC address of the
detected AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.14.1.1 |
apssidThis attribute shall indicate ssid of the detected AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.14.1.2 |
apprivacyThis attribute shall indicate whether privacy is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.14.1.3 |
apbandThis attribute shall indicate the operating band of detected AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.14.1.4 |
apchannelThis attribute shall indicate the channel number used.ro INTEGER .1.3.6.1.4.1.4526.4.7.14.1.5 |
aprateThis attribute shall indicate the rate.ro INTEGER .1.3.6.1.4.1.4526.4.7.14.1.6 |
apbeaconIntervalThis attribute shall indicate the beacon interval in kus (1.024 ms).ro INTEGER .1.3.6.1.4.1.4526.4.7.14.1.7 |
apnumBeaconsThis attribute shall indicate the number of beacons received.ro INTEGER .1.3.6.1.4.1.4526.4.7.14.1.8 |
aplastBeaconThis attribute shall indicate the time of the last beacon.ro INTEGER .1.3.6.1.4.1.4526.4.7.14.1.9 |
knownApTableknownAp Table shows list of known APs. SEQUENCE OF KnownApEntry .1.3.6.1.4.1.4526.4.7.15 |
knownApEntryAn entry in the knownApTable. KnownApEntry .1.3.6.1.4.1.4526.4.7.15.1 |
knownapmacThis attribute shall indicate MAC address of the
known AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.15.1.1 |
knownapssidThis attribute shall indicate ssid of the known AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.15.1.2 |
knownapprivacyThis attribute shall indicate whether privacy is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.15.1.3 |
knownapbandThis attribute shall indicate the operating band of known AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.15.1.4 |
knownapchannelThis attribute shall indicate the channel number used.ro INTEGER .1.3.6.1.4.1.4526.4.7.15.1.5 |
knownaprateThis attribute shall indicate the rate.ro INTEGER .1.3.6.1.4.1.4526.4.7.15.1.6 |
knownapbeaconIntervalThis attribute shall indicate the beacon interval in kus (1.024 ms).ro INTEGER .1.3.6.1.4.1.4526.4.7.15.1.7 |
knownapnumBeaconsThis attribute shall indicate the number of beacons received.ro INTEGER .1.3.6.1.4.1.4526.4.7.15.1.8 |
knownaplastBeaconThis attribute shall indicate the time of the last beacon.ro INTEGER .1.3.6.1.4.1.4526.4.7.15.1.9 |
knownapEntryStatusThe Known AP Entry status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entryrw INTEGER .1.3.6.1.4.1.4526.4.7.15.1.10 |
unknownApTableunknownAp Table shows list of unknown APs. SEQUENCE OF UnknownApEntry .1.3.6.1.4.1.4526.4.7.16 |
unknownApEntryAn entry in the unknownApTable. UnknownApEntry .1.3.6.1.4.1.4526.4.7.16.1 |
unknownapmacThis attribute shall indicate MAC address of the
unknown AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.16.1.1 |
unknownapssidThis attribute shall indicate ssid of the unknown AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.16.1.2 |
unknownapprivacyThis attribute shall indicate whether privacy is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.16.1.3 |
unknownapbandThis attribute shall indicate the operating band of unknown AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.16.1.4 |
unknownapchannelThis attribute shall indicate the channel number used.ro INTEGER .1.3.6.1.4.1.4526.4.7.16.1.5 |
unknownaprateThis attribute shall indicate the rate.ro INTEGER .1.3.6.1.4.1.4526.4.7.16.1.6 |
unknownapbeaconIntervalThis attribute shall indicate the beacon interval in kus (1.024 ms).ro INTEGER .1.3.6.1.4.1.4526.4.7.16.1.7 |
unknownapnumBeaconsThis attribute shall indicate the number of beacons received.ro INTEGER .1.3.6.1.4.1.4526.4.7.16.1.8 |
unknownaplastBeaconThis attribute shall indicate the time of the last beacon.ro INTEGER .1.3.6.1.4.1.4526.4.7.16.1.9 |
wlanAccessControlLocalTableACL attributes in tablular form to allow for multiple
instances on an agent. SEQUENCE OF WlanAccessControlLocalEntry .1.3.6.1.4.1.4526.4.7.17 |
wlanAccessControlLocalEntryAn entry in the wlanAccessControlListTable. It is possible
for there to be multiple AP interfaces on one agent, each
with its unique MAC address. The relationship between an
AP interface and an interface in the context of the
Internet-standard MIB is one-to-one. As such, the value of
an ifIndex object instance can be directly used to identify
corresponding instances of the objects defined herein. WlanAccessControlLocalEntry .1.3.6.1.4.1.4526.4.7.17.1 |
aclMACThis field should indicate an MAC address entry in the
access control local database. When write this field
aclMAC=000000000000, shall remove current MAC address from
local database. Otherwise, shall update the MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.4.7.17.1.1 |
aclMacStatusThe ACL Mac status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entryrw INTEGER .1.3.6.1.4.1.4526.4.7.17.1.2 |