Vsm-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
106
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
106 total| Object Name |
|---|
dv2Vsm OBJECT IDENTIFIER .1.3.6.1.4.1.251.1.1.47 |
RFC1213-MIB Unknown .1.3.6.1.4.1.251.1.1.47 |
vsmCardCfgTableThe VSM card configuration table. SEQUENCE OF VsmCardCfgTableEntry .1.3.6.1.4.1.251.1.1.47.1 |
vsmCardCfgTableEntry VsmCardCfgTableEntry .1.3.6.1.4.1.251.1.1.47.1.1 |
vsmCardCfgIndexIndex for VSM Card Cfg Tablero INTEGER .1.3.6.1.4.1.251.1.1.47.1.1.1 |
vsmCardCfgBndlTslotStatusEnables the collection of Bundle and Timeslot statusro Enumeration .1.3.6.1.4.1.251.1.1.47.1.1.2 |
vsmLinkTableTable for VSM Link configuration SEQUENCE OF VsmLinkEntry .1.3.6.1.4.1.251.1.1.47.2 |
vsmLinkEntry VsmLinkEntry .1.3.6.1.4.1.251.1.1.47.2.1 |
vsmLinkLinkLink Number for Table Entryro INTEGER .1.3.6.1.4.1.251.1.1.47.2.1.1 |
vsmLinkEnableEnable/Disable Link
<DETAIL_DESCRIPTION>
The user has the ability to enable or disable each of
the LIM's links individually.rw Enumeration .1.3.6.1.4.1.251.1.1.47.2.1.2 |
vsmLinkEnableStatLink Enable Status
<DETAIL_DESCRIPTION>
The current status of link depends on a valid lim type,
the availability of a link on the LIM and LIM Configuration.ro Enumeration .1.3.6.1.4.1.251.1.1.47.2.1.3 |
vsmLinkSigTypeEnable/Disable Signalling
<DETAIL_DESCRIPTION>
The user has the ability to enable or disable signalling for each of
the LIM's links individually.rw Enumeration .1.3.6.1.4.1.251.1.1.47.2.1.4 |
vsmTsCfgTableThe timeslot configuration table. SEQUENCE OF VsmTsCfgTableEntry .1.3.6.1.4.1.251.1.1.47.3 |
vsmTsCfgTableEntry VsmTsCfgTableEntry .1.3.6.1.4.1.251.1.1.47.3.1 |
vsmTsCfgLinkNoThe link number.rw INTEGER .1.3.6.1.4.1.251.1.1.47.3.1.1 |
vsmTsCfgTsNoThe timeslot number of the link.rw INTEGER .1.3.6.1.4.1.251.1.1.47.3.1.2 |
vsmTsCfgBundleNoThe Bundle mapped to this timeslot.rw VsmBundle .1.3.6.1.4.1.251.1.1.47.3.1.3 |
vsmTsCfgAALTypAAL type used for timeslot. This must match the AAL type used by
the bundle to which this timeslot is assigned.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.4 |
vsmTsCfgChanIDThe Channel ID (CID) this TS is mapped to. The CID must be unique
across AAL2 VCs of an end-to-end connection. AAL2 only.rw INTEGER .1.3.6.1.4.1.251.1.1.47.3.1.5 |
vsmTsCfgCmprssionTypThe voice compression algorithm being used for the timeslot.
AAL2 only.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.6 |
vsmTsCfgFaxMdmHndlngThe option to handle Fax/Modem signal. AAL2 only. pass-through:
make no change when tone is detected, if compressing then
keep compressing.bypass: If compressing and tone detected,
attempt to switch to uncompressedrw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.7 |
vsmTsCfgEchoCancelIndicate whether echo cancellation is enabled.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.8 |
vsmTsCfgSilenceRmvlAllows for the configuration of silence removal. Auto will disable
silence removal when a FAX/modem tone is detected. AAL2 only.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.9 |
vsmTsCfgIdleDetectIndicate whether idle channel detection is enabled. If disabled
this timeslot will always send cells, even when on hook. AAL2 only.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.10 |
vsmTsCfgRmtLawIndicates the remote VSM's companding type. u-law for T1, a-law for
E1. Auto means use the same type as the local link.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.11 |
vsmTsCfgSignalTypThis object specifies the signal type of the timeslot. None is used
to turn off signaling to allow for data transport.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.12 |
vsmTsCfgSigCndTypNBThe object specifies the type of signaling conditioning to
narrowband.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.13 |
vsmTsCfgSigCndTypATMThe object specifies the type of signaling conditioning to ATM.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.14 |
vsmTsCfgDataCndTypNBThe object specifies the type of data conditioning to narrowband.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.15 |
vsmTsCfgDataCndTypATMThe object specifies the type of data conditioning to ATM.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.16 |
vsmTsCfgMulticastMulticast state: disabled = no multicastrw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.17 |
vsmTsCfgOperStatusThe operating status of the timeslot.ro Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.18 |
vsmTsCfgAdminStatusThe administrative status of the timeslot.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.19 |
vsmTsCfgValiditySet to invalid(2) to delete this row.rw Enumeration .1.3.6.1.4.1.251.1.1.47.3.1.20 |
vsmBundleCfgTableThe configuration table for a Bundle.
<DETAIL_DESCRIPTION>
A VSM Bundle specifies the service requirements of a
virtual channel connection, including AAL type, connection
type (pvc,svc), bandwidth and QoS. SEQUENCE OF VsmBundleCfgTableEntry .1.3.6.1.4.1.251.1.1.47.4 |
vsmBundleCfgTableEntry VsmBundleCfgTableEntry .1.3.6.1.4.1.251.1.1.47.4.1 |
vsmBundleCfgNoThe Bundle number.rw VsmBundle .1.3.6.1.4.1.251.1.1.47.4.1.1 |
vsmBundleCfgVcVpiThe VPI of the VCC.rw VpiInteger .1.3.6.1.4.1.251.1.1.47.4.1.2 |
vsmBundleCfgVcVciThe VCI of the VCC. This is the same as the Bundle no. for VSM.ro VciInteger .1.3.6.1.4.1.251.1.1.47.4.1.3 |
vsmBundleCfgVcAALTypThe AAL type used for the Bundle. This must match the AAL type
used by the timeslot that is assigned to this bundle.rw Enumeration .1.3.6.1.4.1.251.1.1.47.4.1.4 |
vsmBundleCfgMaxTslotSpecify the maximum number of timeslots that will be configured
for the bundle. AAL2 onlyrw INTEGER .1.3.6.1.4.1.251.1.1.47.4.1.5 |
vsmBundleCfgVcCDVATM cell delay variation between VSMs (in 125 microsecond
intervals)
<DETAIL_DESCRIPTION>
ATM cell delay variation between VSMs (in 125 microsecond
intervals). The maximum programmable value for cell delay
variation is 16 milliseconds. Therefore, the greatest number
which may be entered in this field is 128 (128 * 125 microsecond
units). The default value is 8 (1 millisecond).rw INTEGER .1.3.6.1.4.1.251.1.1.47.4.1.6 |
vsmBundleCfgTimerCUMaximum amount of time (msec) to hold ATM cell before padding and
sending. 0 results in an infinite wait. AAL2 only.rw INTEGER .1.3.6.1.4.1.251.1.1.47.4.1.7 |
vsmBundleCfgCESPartialFillSpecify the no. of user octets per cell for partial cell
fill. AAL1 only.rw INTEGER .1.3.6.1.4.1.251.1.1.47.4.1.8 |
vsmBundleCfgVcTypThe option to setup VCC.rw Enumeration .1.3.6.1.4.1.251.1.1.47.4.1.9 |
vsmBundleCfgTrapCfgState change results in traps sent to the management station.rw Enumeration .1.3.6.1.4.1.251.1.1.47.4.1.10 |
vsmBundleCfgOperStatusThe operating status of the bundle.ro Enumeration .1.3.6.1.4.1.251.1.1.47.4.1.11 |
vsmBundleCfgAdminStatusThe administration status of the bundle.rw Enumeration .1.3.6.1.4.1.251.1.1.47.4.1.12 |
vsmBundleCfgValiditySet to invalid(2) to delete this row.rw Enumeration .1.3.6.1.4.1.251.1.1.47.4.1.13 |
vsmCardStatTableThe VSM card status table. SEQUENCE OF VsmCardStatTableEntry .1.3.6.1.4.1.251.1.1.47.5 |
vsmCardStatTableEntry VsmCardStatTableEntry .1.3.6.1.4.1.251.1.1.47.5.1 |
vsmCardStatIndexIndex for VSM Card Status Tablero INTEGER .1.3.6.1.4.1.251.1.1.47.5.1.1 |
vsmCardStatBdTypeVSM Hardware typero DisplayString .1.3.6.1.4.1.251.1.1.47.5.1.2 |
vsmCardStatHWSWCompatibilityHardware Software Compatibility between bin, Basecard & DOCro DisplayString .1.3.6.1.4.1.251.1.1.47.5.1.3 |
vsmCardStatBinPresIndicates presence of vsm.bin filero Enumeration .1.3.6.1.4.1.251.1.1.47.5.1.4 |
vsmCardStatBinRevThe vsm.bin revision numberro DisplayString .1.3.6.1.4.1.251.1.1.47.5.1.5 |
vsmCardStatBdRevThe Card Hardware Feature Revisionro DisplayString .1.3.6.1.4.1.251.1.1.47.5.1.6 |
vsmCardStatDoc1TypeDOC 1 type supports 48 or 60 channelsro Enumeration .1.3.6.1.4.1.251.1.1.47.5.1.7 |
vsmCardStatDoc1TypeRevDOC 1 Hardware Revisionro DisplayString .1.3.6.1.4.1.251.1.1.47.5.1.8 |
vsmCardStatDoc2TypeDOC 2 type supports 48 or 60 channelsro Enumeration .1.3.6.1.4.1.251.1.1.47.5.1.9 |
vsmCardStatDoc2TypeRevDOC 2 Hardware Revisionro DisplayString .1.3.6.1.4.1.251.1.1.47.5.1.10 |
vsmCardStatLimTypeLIM detected for the VSM card.ro Enumeration .1.3.6.1.4.1.251.1.1.47.5.1.11 |
vsmTsStatTableThe VSM Timeslot status table. SEQUENCE OF VsmTsStatTableEntry .1.3.6.1.4.1.251.1.1.47.6 |
vsmTsStatTableEntry VsmTsStatTableEntry .1.3.6.1.4.1.251.1.1.47.6.1 |
vsmTsStatLinkNoThe Link Numberro INTEGER .1.3.6.1.4.1.251.1.1.47.6.1.1 |
vsmTsStatTSNoThe timeslot number of the link.ro INTEGER .1.3.6.1.4.1.251.1.1.47.6.1.2 |
vsmTsStatBundleNoThe Bundle number.ro VsmBundle .1.3.6.1.4.1.251.1.1.47.6.1.3 |
vsmTsStatXmitBytesNumber of bytes which have been transmitted
<DETAIL_DESCRIPTION>
Only applies to AAL2 operating mode. This object provides
the user with a count of the number of bytes which have been
transmitted to the service interface.ro Counter .1.3.6.1.4.1.251.1.1.47.6.1.4 |
vsmTsStatRecvBytesNumber of packets which have been reassembled
<DETAIL_DESCRIPTION>
Only applies to AAL2 operating mode. This object provides
the user with a count of the number of AAL2 packets which
have been reassembled or played out to the service interface.
It excludes packets that were discarded for any reason,
including packets that were not used due to being declared
misinserted or discarded while the reassembler was waiting
to achieve synchronizationro Counter .1.3.6.1.4.1.251.1.1.47.6.1.5 |
vsmTsStatUnderflowsNumber of underflow indications
<DETAIL_DESCRIPTION>
Only applies to AAL2 operating mode. This object provides
the user with a count of the number of underflow indications
reported by the DSP to the Maker device (in 2 ms intervals).ro Counter .1.3.6.1.4.1.251.1.1.47.6.1.6 |
vsmTsStatLostPacketsNumber of lost packets
<DETAIL_DESCRIPTION>
Only applies to AAL2 operating mode. This object provides
the user with a count of the number of AAL2 packets which
have been detected as lost in the network prior to the
destination CES IWF layer processing. The cause of a lost
packet is an invalid sequence number.ro Counter .1.3.6.1.4.1.251.1.1.47.6.1.7 |
vsmTsStatAALTypeAAL type used for timeslot.ro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.8 |
vsmTsStatVCIDThe number of the CID on which this BC is transmittingro INTEGER .1.3.6.1.4.1.251.1.1.47.6.1.9 |
vsmTsStatCIDThe number of the CID assigned to this BCro INTEGER .1.3.6.1.4.1.251.1.1.47.6.1.10 |
vsmTsStatActiveState of Time Slot (Bearer Channel): yes = active; no = not active
<DETAIL_DESCRIPTION>
Provides the user with the activity mode of each Time Slot
individually. A Time Slot is considered active if it is being
processed into ATM cells.
Examples of active Time Slots:
1) an off-hook voice channel
2) any data channel
Example of inactive Time Slot:
1) an on-hook voice channelro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.11 |
vsmTsStatDataLnkIndicates whether bearer channel is using DSP or Bypassro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.12 |
vsmTsStatBlockedIndicates whether bearer channel is in blocked modero Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.13 |
vsmTsStatIdleIdleIndicates whether bearer channel is on-hook or off-hookro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.14 |
vsmTsStatHoldIndicates whether bearer channel is in hold modero Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.15 |
vsmTsStatRemoteCompressedIndicates use of compression algorithm on remote channel
<DETAIL_DESCRIPTION>
A yes indicates that a compression algorithm is being used
on the remote channel data. No indicates that no compression
algorithm is being used on remote channel.ro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.16 |
vsmTsStatRemoteSilentIndicates whether remote channel is in silent mode or non silent mode
<DETAIL_DESCRIPTION>ro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.17 |
vsmTsStatCompressedIndicates use of compression algorithm on local channel
<DETAIL_DESCRIPTION>
A yes indicates that a compression algorithm is being used
on the local channel data. No indicates that no compression
algorithm is being used on the local channel.ro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.18 |
vsmTsStatSilentTime Slot Silence Status
<DETAIL_DESCRIPTION>
Indicates whether local channel is in silent mode (yes) or
non silent mode (no)ro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.19 |
vsmTsStatConditioningConditioning status: yes = conditioning; no = not conditioning
<DETAIL_DESCRIPTION>
Data conditioning is initiated upon the detection of a variety
of error situations including, but not limited to, LOS, LOF and
AIS.ro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.20 |
vsmTsStatRemoteConditioningConditioning status: yes = conditioning; no = not conditioning
<DETAIL_DESCRIPTION>
Data conditioning is initiated upon the detection of a variety
of error situations including, but not limited to, LOS, LOF and
AIS.This indicates the remote side is conditioning.ro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.21 |
vsmTsStatRIWFRemote interworking function alarm active
<DETAIL_DESCRIPTION>ro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.22 |
vsmTsStatLossofRefreshCAS Refresh status: yes = loss of refresh; no = no alarm
<DETAIL_DESCRIPTION>
This only applies when signalling is configured for the timeslot.
When no signalling is configured this defaults to 'no'. When
signalling is configured and it is detected that there is no
response to the refresh packet, this bit is set to 'yes'. This
will result in ATM signalling and data conditioning.ro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.23 |
vsmTsStatCasValuesPDHValue of A B C D bits being sent from VSM physical interface
(PDH side)
<DETAIL_DESCRIPTION>
Provides a snapshot of the current state of the A B C D
signalling bits on the PDH side of the networkro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.24 |
vsmTsStatCasValuesATMValue of A B C D bits being sent from the ATM network
<DETAIL_DESCRIPTION>
Provides a snapshot of the current state of the A B C D
signalling bits on the ATM side of the networkro Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.25 |
vsmTsStatResetSet to yes(1) to reset all counters in the Time Slot status table.rw Enumeration .1.3.6.1.4.1.251.1.1.47.6.1.26 |
vsmBundleStatTableThe VSM Bundle status table. SEQUENCE OF VsmBundleStatTableEntry .1.3.6.1.4.1.251.1.1.47.7 |
vsmBundleStatTableEntry VsmBundleStatTableEntry .1.3.6.1.4.1.251.1.1.47.7.1 |
vsmBundleStatBundleNoThe Bundle number.ro VsmBundle .1.3.6.1.4.1.251.1.1.47.7.1.1 |
vsmBundleStatXmitCellsThe count of the number of AAL2 cells transmittedro Counter .1.3.6.1.4.1.251.1.1.47.7.1.2 |
vsmBundleStatRecvCellsThe count of cells that have been played out to the PDH link.ro Counter .1.3.6.1.4.1.251.1.1.47.7.1.3 |
vsmBundleStatPvcActiveIs the PVC on this Bundle active.ro Enumeration .1.3.6.1.4.1.251.1.1.47.7.1.4 |
vsmBundleStatAALTypeThe AAL type used for the Bundle.ro Enumeration .1.3.6.1.4.1.251.1.1.47.7.1.5 |
vsmBundleStatBufUndrflwsThe number of buffer underflows (AAL1 only).ro Counter .1.3.6.1.4.1.251.1.1.47.7.1.6 |
vsmBundleStatBufOverflowsThe number of buffer overflows (AAL1 only).ro Counter .1.3.6.1.4.1.251.1.1.47.7.1.7 |
vsmBundleStatPtrReframesThe count of the number of events in which SDT pointer is not
where it is expected (AAL1 only).
<DETAIL_DESCRIPTION>
The count of the number of events in which SDT pointer is not
where it is expected (AAL1 only). This counter is 0 for
unstructured CES modero Counter .1.3.6.1.4.1.251.1.1.47.7.1.8 |
vsmBundleStatLostCellsThe number of AAL1 cells detected as lost prior to the destinationro Counter .1.3.6.1.4.1.251.1.1.47.7.1.9 |
vsmBundleStatHdrErrorsThe count of all AAL1 and AAL2 header errors
<DETAIL_DESCRIPTION>
The Header Error count represents a sum of start pointer, sequence
number and parity errors.ro Counter .1.3.6.1.4.1.251.1.1.47.7.1.10 |
vsmBundleStatBadCIDThe count of the number of AAL2 cells having a bad CIDro Counter .1.3.6.1.4.1.251.1.1.47.7.1.11 |
vsmBundleStatAAL2LostCellsThe count of the number of lost AAL2 cells
<DETAIL_DESCRIPTION>
When operating in AAL2 mode, a non-zero count of lost cells is
an indication that invalid sequence numbers existro Counter .1.3.6.1.4.1.251.1.1.47.7.1.12 |
vsmBundleStatResetSet to yes(1) to reset all counters in the Bundle status table.rw Enumeration .1.3.6.1.4.1.251.1.1.47.7.1.13 |
vsmBundleStatConditioningConditioning status: yes = conditioning; no = not conditioning
<DETAIL_DESCRIPTION>
Data conditioning is initiated upon the detection of any or all of
a variety of errors including: no received cell flow, header
errors, buffer underflow, buffer overflow, pointer reframes or
lost cells.ro Enumeration .1.3.6.1.4.1.251.1.1.47.7.1.14 |