VPMT-OPT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for VPMT-OPT-MIB.
20
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.2 |
cdx6500VPMTCfgTableAn VPMT Configuration Table. SEQUENCE OF Cdx6500VPMTCfgEntry .1.3.6.1.4.1.449.2.1.2.2.26 |
cdx6500VPMTCfgEntryEntry in the VPMT Configuration Table.
Each entry contains an index(cdx6500VPMTCfgEntryNum),
and other configuration parameters fot a
single VPMT table Cdx6500VPMTCfgEntry .1.3.6.1.4.1.449.2.1.2.2.26.1 |
cdx6500VPMTCfgEntryNumThis indicate the VPMT Entry Numberro INTEGER .1.3.6.1.4.1.449.2.1.2.2.26.1.1 |
cdx6500VPMTCfgvpTypeSpecify the type of Virtual Port:
NULL : No Configuration
TDM-VOICE : Voice port operates on a configured DS0
PRI-VOICE : Voice port operates on a DS0 determined by the
ISDN/QSIG D-Channel
Transparent-CCS-VOICE : Voice port associated with a TBOP signaling
channel
BYPASS-VOICE : Voice and signaling transparently switched
between configured DS0's
TDM-DATA : Data port operates on a configured DS0
PRI-DATA : Data port operates on a DS0 determined by the
ISDN/QSIG D-Channel
BYPASS-DATA : Data transparently switched between configured DS0's
CCS-BYPASS : Data or Voice switched between two ISDN/QSIG D-channelro Enumeration .1.3.6.1.4.1.449.2.1.2.2.26.1.2 |
cdx6500VPMTCfgvpNumSpecify the Virtual Port Number, 100-254.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.26.1.3 |
cdx6500VPMTCfgdslNumSpecify the Interface Number associated with this Virtual Port, 4-7 (1 based).
Interface Number 1 supports TDM or PRI Data Ports only,
Interface Number 2 and 3 not supportedro INTEGER .1.3.6.1.4.1.449.2.1.2.2.26.1.4 |
cdx6500VPMTCfgds0RateSpecify the DS0 Rate.
For TDM-DATA this parameter controls the speed of the port.
For PRI-DATA this parameter controls the speed of the port only for
outbound calls from this node.
The speed for an inbound call is determined by the incoming Call Request.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.26.1.5 |
cdx6500VPMTCfgsrcTimeSlotSpecify the Time Slot assignments
No of DS0/B-channel 1-24 for T1
No of DS0/B-channel 1-31 for E1 - TDM-DATA
No of DS0/B-channel 1-15,17-31 for E1 - TDM-VOICE
Note: Only TDM-DATA virtual port type can use more than 1 time slot.
INT. 1 Supports max. 31 data ports.
INT. 4 & 5 Supports max 31 data ports and 30 voice ports
INT. 6 & 7 Supports max 31 data ports and 30 voice portsro INTEGER .1.3.6.1.4.1.449.2.1.2.2.26.1.6 |
cdx6500VPMTCfgdestTimeSlotSpecify the number of Time Slot on the Destination interface:
1-24 for T1
1-31 for E1ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.26.1.7 |
cdx6500VPMTCfglocalDialNumEnter the Local Subscriber Address (ISDN number) for this
virtual port/CCS Bypass connection.
Use the space bar to blank the parameter. 1 to 20 characters
For Outgoing Call:
For Data Calls - This will be passed as the outgoing Calling Party
number. Only valid characters are 0 - 9.
For Voice Calls - This will be passed as the outgoing Calling Party
number if the 'Calling Address Replacement' parameter
is configured in the T1/E1 port record. Only valid
characters are 0 - 9.
For CCS Bypass - This parameter is not applicable.
For Incoming Call:
For Data Calls - The Called Party number received by the aggregate
interface is compared to this parameter.
Enter a trailing asterisk(*) as a wild-card.
For Voice Calls - This will be passed as the ingoing Calling Party
number if the 'Calling Address Replacement' parameter
is configured in the T1/E1 port record. Only valid
characters are 0 - 9.
For CCS Bypass - The Called Party Number received by the aggregate
interface is compared to this parameter.
If a match is found, the ISDN/QSIG call will be
forwarded to the adjacent T1/E1 port.
If the first character is a '!' the call will be
BYPASS if the remaining number does not match
the Called Party Number.
If the first character is a '@' the call will be
will not be BYPASS if the remaining number matches
the Called Party Number and the search for BYPASS
match will be abortedro DisplayString .1.3.6.1.4.1.449.2.1.2.2.26.1.8 |
cdx6500VPMTCfgsubAddressOutgoing Call:
This subaddress will be sent in the Call Setup Message.
Incomin Call:
This subaddress will be used for call verification if providedro DisplayString .1.3.6.1.4.1.449.2.1.2.2.26.1.9 |
cdx6500VPMTCfgcallPermissionClear Circuit Mode call permission criteria. This defines the
types of call handling criteria for the ISDN line.
OUT - Initiates call only; does not accept call.
INC - Accepts call only; does not send call to the network.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.26.1.10 |
cdx6500VPMTCfgnum-ccs-bypass-connectionsSpecifies the maximum number of simultaneous CCS Bypass connections
allowed to the called number.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.26.1.11 |
cdx6500VPMTCfgPhysical-PortSpecify the Physical Port Number.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.26.1.12 |