VPLS-LDP-DRAFT-01-MIB
Updated Aug 30, 2006The VPLS-LDP-DRAFT-01-MIB module defines managed objects for monitoring LDP-signaled Virtual Private LAN Services (VPLS) over pseudowires, specifically tracking LDP session states, pseudowire bindings, and VPLS instance parameters as standardized in RFC 4762.
Imported Objects
Objects
11 total| Object Name |
|---|
jnxVplsLdpDraft01MIBCopyright (C) The IETF Trust (2010). The initial
version of this MIB module was published in RFC XXXX.
For full legal notices see the RFC itself or see:
http://www.ietf.org/copyrights/ianamib.html
This MIB module contains managed object definitions for
LDP signalled Virtual Private LAN Services as in
[RFC4762]
This MIB module enables the use of any underlying PseudoWire
network. MODULE-IDENTITY .1.3.6.1.4.1.2636.5.9 |
jnxVplsLdpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.9.0 |
jnxVplsLdpPwBindMacTableFullThe jnxVplsLdpPwBindMacTableFull notification is generated
when the number of learned MAC-Addresses increases to
the value specified in jnxVplsLdpPwBindMacAddressLimit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.9.0.1 |
jnxVplsLdpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.9.1 |
jnxVplsLdpConfigTableThis table specifies information for configuring
and monitoring LDP specific parameters for
Virtual Private Lan Services(VPLS). SEQUENCE OF JnxVplsLdpConfigEntry .1.3.6.1.4.1.2636.5.9.1.1 |
jnxVplsLdpConfigEntryA row in this table represents LDP specific information
for Virtual Private Lan Service(VPLS) in a packet network.
It is indexed by jnxVplsConfigIndex, which uniquely
identifies a single VPLS.
A row is automatically created when a VPLS service is
configured using LDP signalling.
None of the read-create objects values can be
changed when jnxVplsRowStatus is in the active(1)
state. Changes are allowed when the jnxVplsRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the jnxVplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect. JnxVplsLdpConfigEntry .1.3.6.1.4.1.2636.5.9.1.1.1 |
jnxVplsLdpConfigMacAddrWithdrawThis object specifies if MAC address withdrawal
is enabled in this service. If this object is true then
Mac address withdrawl Learning is enabled. If false,
then Mac Learning is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.9.1.1.1.1 |
jnxVplsLdpPwBindTableThis table provides LDP specific information for
an association between a VPLS service and the
corresponding Pseudo Wires. A service can have more
than one Pseudo Wire association. Pseudo Wires are
defined in the pwTable. SEQUENCE OF JnxVplsLdpPwBindEntry .1.3.6.1.4.1.2636.5.9.1.2 |
jnxVplsLdpPwBindEntryEach row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the one
to many association of service to pseudowire.
An entry in this table in instantiated only when
LDP signalling is used to configure VPLS service.
Each entry in this table provides LDP specific
information for the VPlS represented by
jnxVplsConfigIndex. JnxVplsLdpPwBindEntry .1.3.6.1.4.1.2636.5.9.1.2.1 |
jnxVplsLdpPwBindMacAddressLimitThe value of this object specifies the maximum number
of learned and static entries allowed in the
Forwarding database for this PW Binding. The value 0
means there is no limit for this PW Binding.ro Unsigned32 (0.. 4294967295) .1.3.6.1.4.1.2636.5.9.1.2.1.1 |
jnxVplsLdpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.9.2 |
More MIBs from Juniper Networks
Browse all Juniper NetworksMIBs →The JUNIPER-CHASSIS-DEFINES-MIB establishes the foundational Object Identifier (OID) namespace and data type definitions required to map and identify specific Juniper chassis hardware platforms and their internal physical components. This module serves as the structural prerequisite for the JUNIPER-CHASSIS-MIB, enabling the retrieval of inventory data, component status, and hardware topology details for Juniper MX, PTX, and EX series devices.
The JUNIPER-MOBILE-GATEWAY-GTP-MIB provides SNMP objects for monitoring GTP (GPRS Tunneling Protocol) session states, tunnel endpoints, and protocol counters on Juniper mobile gateway platforms. It enables administrators to track GTP-C and GTP-U traffic statistics, error conditions, and active tunnel metrics essential for validating mobile core network connectivity.
SNMP MIB module
SNMP MIB module
The JUNIPER-MOBILE-GATEWAY-SGW-GTP-MIB module enables monitoring of GTP (GPRS Tunneling Protocol) session states and traffic counters on Juniper Mobile Gateway Serving Gateways (SGW). It provides specific objects for tracking GTP-C and GTP-U tunnel establishment, teardown, and packet throughput metrics essential for validating mobile core network connectivity.
The JUNIPER-IPSEC-FLOW-MON-MIB monitors Juniper Networks IPsec VPN infrastructure by exposing tables for IKE tunnels, IPSec tunnels, and IPSec security associations to track tunnel states, association parameters, and flow statistics. This module facilitates the management of IPsec security policies and the operational status of encrypted traffic flows within the device's security architecture.