VISM-LAPD-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for VISM-LAPD-MIB.
46
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
vismLapdGrp OBJECT IDENTIFIER .1.3.6.1.4.1.173.7.12.12 |
RFC1155-SMI Unknown .1.3.6.1.4.1.173.7.12.12 |
vismLapdTableThis table is used for maintaining the configuration of
the LAPD channel on VISM. SEQUENCE OF VismLapdEntry .1.3.6.1.4.1.173.7.12.12.1 |
vismLapdEntryAn entry for vismLapdTable. VismLapdEntry .1.3.6.1.4.1.173.7.12.12.1.1 |
vismLapdIndexThis is the logical index for this table. This is derived
from the following formula:
index = 31 * (Ds1# - 1) + ds0#
where : Ds1# - The T1/E1 line number in the range 1 - 8.
ds0# - The ds0 channel number ranging from
1 to 24 for T1
and 1 to 31 for E1.
Currently the range of 1 to 248 is used.ro INTEGER .1.3.6.1.4.1.173.7.12.12.1.1.1 |
vismLapdAppTypeThis object indicates the type of the LAPD interface. When the
user creates a LAPD entry this object need to be specified.
After creation it cannot be modified.rw Enumeration .1.3.6.1.4.1.173.7.12.12.1.1.2 |
vismLapdWinSizeThe window size - maximum number of sequencially numbered I-frames
that may be outstanding.
VISM support window size range 1 to 127.rw INTEGER .1.3.6.1.4.1.173.7.12.12.1.1.3 |
vismLapdN200The maximum number of retransmissions of a frame.rw INTEGER .1.3.6.1.4.1.173.7.12.12.1.1.4 |
vismLapdT200The maximum number of time in milliseconds to wait for
acknowledgement for a transmit frame.
Transmission may be initiated. This value should be less
than vismLapdT203Timer.
For PRI, the range is 1000 ms to 1023000 ms. The default is
1000 ms.
For GR-303, the range is 100 ms to 350 ms in increments of
50 ms. The default value is 150 ms.rw INTEGER .1.3.6.1.4.1.173.7.12.12.1.1.5 |
vismLapdT203The maximum time (in milliseconds) allowed without frames being
exchanged. This value should be greater than vismLapdT200.
For PRI, the range is 1000 to 1023000 and the default is 10000 ms.
For GR-303, the range is 10000 to 300000 ms in increments of 10000
ms. The default is 30000 ms.rw INTEGER .1.3.6.1.4.1.173.7.12.12.1.1.6 |
vismLapdTypeThis object specifies what type of interface the LAPD stack
will be used with.
ccitt(1) : CCITT
att5EssPRA(3) : AT&T 5ESS PRA
att4Ess(4) : AT&T 4ESS
ntDMS100PRA(6) : NT dms100 PRA
vn2or3(7) : VN 2 or VN 3
insNet(8) : INS Net
tr6MPC(9) : tr6 MPC
tr6PBX(10) : tr6 PBX
ausp(12) : Austel Primary
ni1(13) : National ISDN-1
etsi(14) : ETSI
bc303TMC(15) : Bellcorp tr303 tmc
bc303CSC(16) : Bellcorp tr303 csc
ntDMS250(17) : NT dms250
bellcore(18) : Bellcore
ni2(19) : National ISDN-2rw Enumeration .1.3.6.1.4.1.173.7.12.12.1.1.7 |
vismLapdRowStatusRow status allows users to create or delete a LAPD entry.
CreateAndGo: Use this to add an entry in this table.
Before create a LAPD entry session manager should
already be set up. i.e. session set, group and session(s)
have been created.
Before creating a LAPD entry the entry in Hdlc table will
implicitly created first. If the DS0 has already been used
then the request of creating a LAPD channel on the same DS0
on the same line will be rejected. After creating the LAPD
entry the corresponding entry in vismLapdStatsTable will be
implicitly created.
active: When an entry is created it becomes active.
destory: Use this to delete an entry in this table. After
implicitly deleting all the entries(if there is any) in
vismLapdDlcEntry table for the specific D channel the entry
in vismLapdEntry will be deleted, then the entry in
vismLapdStatsTable will be implicitly deleted, followed by
the deletion of the Hdlc entry.rw Enumeration .1.3.6.1.4.1.173.7.12.12.1.1.8 |
vismLapdSideThis object specifies whether LAPD stack is on the
user side or network side.
This object can be set when the row is created. It
can not be modified for an existing row.rw Enumeration .1.3.6.1.4.1.173.7.12.12.1.1.9 |
vismLapdTrunkTypeThis object indicates if the line is configured for Trunking or
PRI Backhaul. This object is set to the appropriate type when the
vismRudpSessionType parameter in the vismRudpSessionCnfEntry table
is set. The motivation to have similar such objects at two places
is for convenience.ro Enumeration .1.3.6.1.4.1.173.7.12.12.1.1.10 |
vismLapdStatsTableThis table contains statistics information for all
LAPD (D channel Data Link)
interfaces on VISM. SEQUENCE OF VismLapdStatsEntry .1.3.6.1.4.1.173.7.12.12.2 |
vismLapdStatsEntryAn entry in the LAPD Table. VismLapdStatsEntry .1.3.6.1.4.1.173.7.12.12.2.1 |
vismLapdStatsIndexThis is the logical index for this table. It is the same
as vismLapdIndex. An entry of this table will be implicitly
created when a LAPD entry is added.ro INTEGER .1.3.6.1.4.1.173.7.12.12.2.1.1 |
vismLapdRxInfoFramesInformation frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.2 |
vismLapdTxInfoFramesInformation frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.3 |
vismLapdRxReadyFramesReceiver Ready frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.4 |
vismLapdTxReadyFramesReceiver Ready frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.5 |
vismLapdRxNotReadyFramesReceiver Not Ready frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.6 |
vismLapdTxNotReadyFramesReceiver Not Ready frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.7 |
vismLapdRxSABMFramesSet Asynchronous Balanced Mode frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.8 |
vismLapdTxSABMFramesSet Asynchronous Balanced Mode frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.9 |
vismLapdRxDisconFramesDisconnect frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.10 |
vismLapdTxDisconFramesDisconnect frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.11 |
vismLapdRxUAFramesUnnumbered Acknowledge frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.12 |
vismLapdTxUAFramesUnnumbered Acknowledge frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.13 |
vismLapdRxDiscModeFramesDisconnect Mode frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.14 |
vismLapdTxDiscModeFramesDisconnect Mode frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.15 |
vismLapdRxFrmRejectFramesFrame Reject frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.16 |
vismLapdTxFrmRejectFramesFrame Reject frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.17 |
vismLapdRxExchIdFramesExchange Id frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.18 |
vismLapdTxExchIdFramesExchange Id frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.19 |
vismLapdRxUnumInfoFramesUnnumbered Information frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.20 |
vismLapdTxUnumInfoFramesUnnumbered Information frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.21 |
vismLapdRxRejectFramesReceived Reject Frames.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.22 |
vismLapdTxRejectFramesReject frames transmitted.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.23 |
vismLapdRxInvalidFramesInvalid frames received.ro Counter .1.3.6.1.4.1.173.7.12.12.2.1.24 |
vismLapdDlcTableThis table is used for maintaining the link state of
different DLCs on a LAPD channel. An entry of this table
will be implicitly created some time after a LAPD entry
is added. SEQUENCE OF VismLapdDlcEntry .1.3.6.1.4.1.173.7.12.12.3 |
vismLapdDlcEntryAn entry for vismLapdDlcTable. VismLapdDlcEntry .1.3.6.1.4.1.173.7.12.12.3.1 |
vismLapdDlcIndexThis object identifies the corresponding LAPD index. It is the
same as vismLapdIndex.ro INTEGER .1.3.6.1.4.1.173.7.12.12.3.1.1 |
vismLapdDlcSapiThis is the SAPI of a specific DLC.ro INTEGER .1.3.6.1.4.1.173.7.12.12.3.1.2 |
vismLapdDlcTeiThis is the TEI of a specific DLC.ro INTEGER .1.3.6.1.4.1.173.7.12.12.3.1.3 |
vismLapdDlcLinkStateThis object indicate the linking state on a given DLC.ro Enumeration .1.3.6.1.4.1.173.7.12.12.3.1.4 |