VINES-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
494
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
494 total| Object Name |
|---|
banyan OBJECT IDENTIFIER .1.3.6.1.4.1.130 |
vinesmibs OBJECT IDENTIFIER .1.3.6.1.4.1.130.1 |
mib1 OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.1 |
mib2 OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2 |
nmLoadAvgHighThe 15 minute load average on the specified server has exceeded the specified threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.1 |
nmSwapAvgHighThe 15 minute swap average on the specified server has exceeded the specified threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.2 |
nmDropsHighThe 15 minute average of dropped messages (due to lack of comms buffers) on the specified server has exceeded the specified threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.3 |
nmFreeSwapLowThe Free Swap space on the specified server fell below the specified threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.4 |
nmFreeMemLowThe Free Process memory space on the specified server fell below the specified threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.5 |
nmCommBuffHighThe communications buffer usage on the specified server exceeded the specified threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.6 |
nmSockInUseHighThe sockets in use on the specified server exceeded the specified threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.7 |
nmSockOvflowSocket overflow for the specified service. The number of packets dropped is also provided. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.8 |
nmMsgAvgHighThe 15 minute average of message activity on the specified server has exceeded the specified threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.9 |
nmAllocFail_HighThe number of failed communication buffer allocations on the specified server exceeded the specified threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.10 |
nmCacheHits_LowThe percentage of cache buffer requests that the specified server was able to service using existing cache buffers, without reading new data from the disk, fell below the specified threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.11 |
nmDiskFullThe percentage of disk space in use on the specified disk exceeded the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.12 |
nmDiskBusyThe 5 minute average of percentage of time the specified disk was in use exceeded the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.13 |
nmInodesHighThe number of inodes in use on the specified server exceeded the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.14 |
nmProcsHighThe specified server cannot run any more processes. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.15 |
nmTKRingOpenThe token ring adapter in the specified slot has an open/short circuit detected. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.16 |
nmTKRingSigLossThe token ring adapter in the specified slot has been detected with a Signal Loss. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.17 |
nmTKRingHardErrThe token ring adapter in the specified slot has been detected with a Hard Error. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.18 |
nmTKRingRmvHardErrThe token ring adapter in the specified slot removed itself from the token ring. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.19 |
nmTKRingRmvMacFrameRemoving the MAC frame from the token ring adapter in the specified slot caused it to remove itself from the Token Ring. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.20 |
nmLnkDropsHighThe percentage of frames dropped with respect to the total frames received, over the previous 15 minutes, exceeded the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.21 |
nmLnkReTXHighThe percentage of frames retransmitted with respect to the total frames transmitted, over the previous 15 minutes, exceeded the threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.22 |
bsSysBkUpFailedThe system back-up on the specified system failed with the given error code. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.23 |
bsIncBkUpAbortedThe incremental back-up on the specified system was aborted. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.24 |
bsIncBkUpFailedThe incremental back-up on the specified system failed with the given error code. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.25 |
bsSvcBkUpFailedThe service back-up on the specified system failed with the given error code. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.26 |
psFormUnavailThe specified job requested a paper format which was not available. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.27 |
psUserNoAuthThe specified user is not authorized to connect to the specified printer. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.28 |
psBadDestThe specified destination cannot be started. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.29 |
psJobRejectThe specified job was rejected on the specific print service by the given user. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.30 |
psQueueFullThe specified print queue has reached its' capacity. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.31 |
psOfflineThe specified entity has gone offline. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.32 |
psPapErrorThe specified PAP error occurred on the given connection ID. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.33 |
psAtalkErrA fatal AppleTalk error occurred in the PostScript print service. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.34 |
psPsPrinterErrA printer error was detected on the PostScript print service. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.35 |
ssSvcNoStartThe specified service was unable to be started by Server Service. The error code is provided. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.36 |
ssNoReconnVSServer Service failed to reconnect to VINES Security Service. The error code is provided. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.37 |
ssNoReconnSTServer Service failed to reconnect to StreetTalk Service. The error code is provided. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.38 |
ssSvcCrashedThe specified service crashed. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.39 |
ssSvcRecrashedThe specified service recrashed on a restart attempt. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.40 |
ssBadSvcDBThe services database is corrupted. Server Service is halting. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.41 |
ssPowerFailThe power has failed. Server Service is going down. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.42 |
ssDyingServer Service died with the given error. All services will be killed. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.43 |
ssPanicDBWriteServer Service failed to write to the services database file. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.44 |
ssPanicWaitServer Service failed to wait on child process death. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.45 |
ssPanicUlimitServer Service unable to set limit. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.46 |
ssNoMemoryServer Service unable to allocate memory. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.47 |
ssTimeSetServer Service set the Network Time. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.48 |
msMBoxFullThe specified user's mailbox is full. The mail service is unable to deliver mail from the second user name. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.49 |
msDiskFullThe Mail service disk is running out of space; only the specified number of kilobytes are left. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.50 |
msPanicThe Mail service failed with the given error code. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.51 |
msCompressFailMessage Compression failed on the given message. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.52 |
msDecompressFailMessage Decompression failed on the given message. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.53 |
msMasqueradeThe specified user is sending mail masquerading as the second user name. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.54 |
msMTAPanicThe mail message transport system has crashed. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.55 |
msBMSPanicThe mail message store system has crashed. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.56 |
vsNoReachSTThe VINES Security Service cannot access the local StreetTalk Service. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.57 |
vsBadLoginPhysLocA failed login occurred due to an invalid physical location. The attempt was from the given port and using the given user name. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.58 |
vsBadLoginDialinA failed login occurred due to a breach of dial-in security. The attempt was from the given port and using the given user name. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.59 |
vsBadLoginTimeA failed login occurred for the given user name due to attempt to login outside of login-time restrictions. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.60 |
vsMaxBadLoginsA failed login occurred from the given port for the given user name due to exceeding the maximum allowed password attempts. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.61 |
vsSDBInconsistThe nonce stamp did not match with that in the session database file. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.62 |
vsNoSessAvailA login session was denied as the allowed no. of sessions had been reached. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.63 |
vsSvrSvrPwdA secure link was requested to the specified server and was not established due to a bad password. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.64 |
vsNoSTLoginThe VINES Security Service could not login to StreetTalk, with the given error code, and hence is exiting. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.65 |
vsNoSpaceThe VINES Security Service could not compress the sessions file as the disk is full. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.66 |
vsLinkDownThe point-to-point link to the specified server has been severed. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.67 |
vsPCDialTermA PC Dial-In session has been severed on the indicated slot and line number. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.68 |
vsPCDialInitA PC Dial-In session has been established on the indicated slot and line number. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.69 |
afpAtalkDownAn AppleTalk stack error was detected. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.70 |
afpSessDisconA Session disconnect was detected. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.71 |
daGCoreDumpSTDA getnames going down unexpectedly. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.72 |
daSCoreDumpSTDA service going down unexpectedly. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.73 |
stCoreDumpStreetTalk service going down unexpectedly with the given error code. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.74 |
st162ErrsThe current 15 minute average of 162 (network timeout) errors has exceeded the set threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.75 |
stAddedGrpThe specified group has been added on the given server. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.76 |
stDeletedGrpThe specified group has been deleted on the given server. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.77 |
stRebuildA data inconsistency was found in the specified group. A rebuild will be attempted. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.78 |
stGrpLimitThe number of groups on the server has exceeded the threshold percentage value of the maximum allowed. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.79 |
stSerialNumThe server serial number has been changed from the given old value to the given new value. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.80 |
stDupGrpA duplicate of the specified group also exists on the given server. NOTIFICATION-TYPE .1.3.6.1.4.1.130.1.2.0.81 |
systemsummary OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.1 |
ssNameThe StreetTalk name of the server, up to 15 characters long.ro OCTET STRING .1.3.6.1.4.1.130.1.2.1.1 |
ssNetidThe VINES network ID of the server, which is equal to the server's serial number. This ID may be up to 4 bytes in length.ro INTEGER .1.3.6.1.4.1.130.1.2.1.2 |
ssSwRevThe VINES software revision for this server.ro OCTET STRING .1.3.6.1.4.1.130.1.2.1.3 |
ssLoadAvg1The one minute exponential decaying average of server load.ro INTEGER .1.3.6.1.4.1.130.1.2.1.4 |
ssLoadAvg5The five minute exponential decaying average of server load.ro INTEGER .1.3.6.1.4.1.130.1.2.1.5 |
ssLoadAvg15The 15 minute exponential decaying average of server load.ro INTEGER .1.3.6.1.4.1.130.1.2.1.6 |
ssMsgAvg1The one minute exponential decaying average of network messages sent and received per second.ro INTEGER .1.3.6.1.4.1.130.1.2.1.7 |
ssMsgsInThe total number of network messages that the server has received over the network since the last reboot.ro Counter .1.3.6.1.4.1.130.1.2.1.8 |
ssMsgsOutThe total number of network messages that the server has sent over the network since the last reboot.ro Counter .1.3.6.1.4.1.130.1.2.1.9 |
ssDropsThe total number of received messages that could not be processed due to a lack of communications buffer space.ro Counter .1.3.6.1.4.1.130.1.2.1.10 |
ssSwapAvgAn exponential decaying average of the number of times a process was swapped to or from disk per second over a one minute period.ro INTEGER .1.3.6.1.4.1.130.1.2.1.11 |
ssProcTypeThe type of the processor.ro Enumeration .1.3.6.1.4.1.130.1.2.1.12 |
ssProdTypeThe type of banyan product.ro Enumeration .1.3.6.1.4.1.130.1.2.1.13 |
ssProdDescrThe description of the product type.ro OCTET STRING .1.3.6.1.4.1.130.1.2.1.14 |
ssRealMemoryThe total amount of RAM, in kilobytes, configured in the server.ro INTEGER .1.3.6.1.4.1.130.1.2.1.15 |
ssOsTypeThe type of server OS. UNIX is the only operating system supported.ro Enumeration .1.3.6.1.4.1.130.1.2.1.16 |
ssOsRevThe operating system version.ro OCTET STRING .1.3.6.1.4.1.130.1.2.1.17 |
ssSystemUptimeThe amount time since this host was last initialized. Note that this is different from sysUpTime because sysUpTime is the uptime of the network management portion of the system.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.1.18 |
ssSystemDateThe current time on the server.ro INTEGER .1.3.6.1.4.1.130.1.2.1.19 |
ssSystemStatusThe status of the server. When the server is initialized this field will get set to running. When a shutdown is requested the server will shutdown all services and await a manual reboot. A reboot request will shut down all services and automatically reboot the machine.rw Enumeration .1.3.6.1.4.1.130.1.2.1.20 |
ssUserLicenseCfgThe user limit license for this server.ro INTEGER .1.3.6.1.4.1.130.1.2.1.21 |
services OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.2 |
svcNumberThe number of services in the svcTable.ro INTEGER .1.3.6.1.4.1.130.1.2.2.1 |
svcTableA list of services on the server. SEQUENCE OF SvcEntry .1.3.6.1.4.1.130.1.2.2.2 |
svcEntryEach entry contains a set of statistics for one service. SvcEntry .1.3.6.1.4.1.130.1.2.2.2.1 |
svcIndexA unique value for each service used by SNMP to keep track of service table entries. This value may vary if the table changes.ro INTEGER .1.3.6.1.4.1.130.1.2.2.2.1.1 |
svcNameThe StreetTalk name of the service, the names are of the form 'item@group@organization'.ro OCTET STRING .1.3.6.1.4.1.130.1.2.2.2.1.2 |
svcStatusThe status of the service. Running - available to users. Initializing - starting and will be available shortly. Crashing - not functioning properly. Inconsistent - the name cannot be found. Stopped - not running. Only running and stopped are valid for sets.rw Enumeration .1.3.6.1.4.1.130.1.2.2.2.1.3 |
svcUpTimeThe amount of time that the service has been running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.2.2.1.4 |
svcMsgsInThe total number of messages that the service has received over the network since the service was last started.ro Counter .1.3.6.1.4.1.130.1.2.2.2.1.5 |
svcMsgsOutThe total number of messages that the service has sent over the network since the service was last started.ro Counter .1.3.6.1.4.1.130.1.2.2.2.1.6 |
svcLocInThe number of messages received by the service that were sent by entities that are local to the service's server since the service was last started.ro Counter .1.3.6.1.4.1.130.1.2.2.2.1.7 |
svcLocOutThe number of messages sent by the service to entities that are local to the service's server since the service was last started.ro Counter .1.3.6.1.4.1.130.1.2.2.2.1.8 |
svcActSessThe number of active sessions with the service.ro INTEGER .1.3.6.1.4.1.130.1.2.2.2.1.9 |
svcTotSessThe total number of sessions that the service has handled since it was last started.ro Counter .1.3.6.1.4.1.130.1.2.2.2.1.10 |
svcCategoryThe type of service defined as follows: 1 Server Service 2 File Service or DOS/UNIX bridge file service 3 Print Service 4 Mail Service 5 StreetTalk Service 6 Time 7 File Transfer Protocol (FTP) 8 Semaphore Service 9 System Network Architecture Service 10 Virtual Terminal Service 11 Asynchronous Terminal Service 12 Netbios Service 13 PC-Based Service 14 Bisynchronous Service 15 APPC Service(APPCCAT) 16 Network Management Service 17 VINES Security Service 18 StreetTalk Directory Assistance Service 19 AppleTalk Filing Protocol (AFP) 20 VINES Configuration Service 21 Event Management Service 22 Link Service 23 Backup Service 24 Unused 25 VINES Remote Service 26 Remote Execution Service 27 Tree Service 28 VINES Proxy Agent Service 29 WAN Configuration Service 30 AppleTalk Agent Service 31 Alert Management Service 32 Unused 33 Unused 34 Unused 35 Remote Program Load Service 36 StreetTalk Agent Service 37 NetWare Print Queue Service 38 NetWare Print Service 39 NetWare File Service 100 AdminList 1986 VINES Assistant Service 1888 SMTP Service Third-party services return values from 1000 to 1899.ro INTEGER .1.3.6.1.4.1.130.1.2.2.2.1.11 |
svcCpuTimeThe amount of current CPU use that the service is generating.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.2.2.1.12 |
svcSizeThe amount of virtual memory that is allocated to the service.ro INTEGER .1.3.6.1.4.1.130.1.2.2.2.1.13 |
svcSocketsThe number of VINES sockets that the service is currently consuming.ro INTEGER .1.3.6.1.4.1.130.1.2.2.2.1.14 |
svcSPPsThe number of SPP connections that the service is currently consuming.ro INTEGER .1.3.6.1.4.1.130.1.2.2.2.1.15 |
svcLogMaskThe current log mask of a service.rw Enumeration .1.3.6.1.4.1.130.1.2.2.2.1.16 |
svcDiskNameThe location of the service.ro OCTET STRING .1.3.6.1.4.1.130.1.2.2.2.1.17 |
svcUserTableA list of the users for the services. SEQUENCE OF SvcUserEntry .1.3.6.1.4.1.130.1.2.2.3 |
svcUserEntryAn entry in the list of service users. SvcUserEntry .1.3.6.1.4.1.130.1.2.2.3.1 |
svcUserSvcIndexA unique value for each service on the server, used by SNMP to order the list.ro INTEGER .1.3.6.1.4.1.130.1.2.2.3.1.1 |
svcUserIndexA unique value for each user of a service. This value will change as new users are added and old users deleted from the service.ro INTEGER .1.3.6.1.4.1.130.1.2.2.3.1.2 |
svcUserSvcNameThe StreetTalk name of the service.ro OCTET STRING .1.3.6.1.4.1.130.1.2.2.3.1.3 |
svcUserNameThe StreetTalk name of the user of the service.ro OCTET STRING .1.3.6.1.4.1.130.1.2.2.3.1.4 |
peripherals OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.3 |
dskNumberThe number of disks in the disk table.ro INTEGER .1.3.6.1.4.1.130.1.2.3.1 |
dskTableA list of statistics for the disks on this server. SEQUENCE OF DskEntry .1.3.6.1.4.1.130.1.2.3.2 |
dskEntryThe statistics for one disk. DskEntry .1.3.6.1.4.1.130.1.2.3.2.1 |
dskIndexA unique value for each disk on the server, used by SNMP to order the table.ro INTEGER .1.3.6.1.4.1.130.1.2.3.2.1.1 |
dskNameThe name of the disk unit.ro OCTET STRING .1.3.6.1.4.1.130.1.2.3.2.1.2 |
dskUtilA five minute exponential decaying average showing the percentage of time that the disk unit was in use transferring data. INTEGER .1.3.6.1.4.1.130.1.2.3.2.1.3 |
dskDemandA five minute exponential decaying average showing the percentage of time that the disk unit needed to be used to satisfy all requests. INTEGER .1.3.6.1.4.1.130.1.2.3.2.1.4 |
dskSizeMBThe size of the disk in megabytes.ro INTEGER .1.3.6.1.4.1.130.1.2.3.2.1.5 |
dskUsedPctThe percentage of disk space that is currently in use.ro INTEGER .1.3.6.1.4.1.130.1.2.3.2.1.6 |
dskStatusThe disks status, 1 is non-operational, 2 is operational.ro Enumeration .1.3.6.1.4.1.130.1.2.3.2.1.7 |
dskNOperationsThe total number of reads and writes for the disk since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.3.2.1.8 |
dskNBlocksThe total number of 1-kilobyte data blocks transferred to and from the disk since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.3.2.1.9 |
dskRespThe total amount of time processes spent waiting for a response from the disks.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.3.2.1.10 |
dskActiveThe total amount of the disk was active.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.3.2.1.11 |
dskBlkSizeThe block size in megabytes.ro INTEGER .1.3.6.1.4.1.130.1.2.3.2.1.12 |
dskNMiscThe total number of miscellaneous disk operations since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.3.2.1.13 |
dskNErrsThe total number of disk errors that were not logged since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.3.2.1.14 |
dskPctBusyA five minute exponential decaying average showing the percentage of time that the disk spent servicing data transfer requests.ro INTEGER .1.3.6.1.4.1.130.1.2.3.2.1.15 |
dskAvgWaitA five minute exponential decaying average showing the average amount of time that read and write requests waited on the request queue to be serviced.ro INTEGER .1.3.6.1.4.1.130.1.2.3.2.1.16 |
dskAvgServiceA five minute exponential decaying average showing the average amount of time that the disk took to service read and write requests.ro INTEGER .1.3.6.1.4.1.130.1.2.3.2.1.17 |
filesystem OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.4 |
fsTotCacheThe amount of server RAM, in kilobytes, that is used for caching purposes. This is configurable from the server's console. Note: The setting of this object will not take effect until the server is rebooted.rw INTEGER .1.3.6.1.4.1.130.1.2.4.1 |
fsCacheBufSizeThe amount of server RAM, in kilobytes, that makes up a file system cache buffer. Also configurable from the console. Note: The setting of this object will not take effect until the server is rebooted.rw INTEGER .1.3.6.1.4.1.130.1.2.4.2 |
fsMaxOpenFilesThe largest number of open files on the server at a single point in time.ro INTEGER .1.3.6.1.4.1.130.1.2.4.3 |
fsOpenFilesThe number of files currently open.ro INTEGER .1.3.6.1.4.1.130.1.2.4.4 |
fsMaxOpensOnFilesThe largest number of open operations on files at a single point in time. There can be more than one open operation on an open file. For example, two users may open the same file. This file would count as one open file and two open operations on the file.ro INTEGER .1.3.6.1.4.1.130.1.2.4.5 |
fsOpensOnFilesThe current number of open operations on files.ro INTEGER .1.3.6.1.4.1.130.1.2.4.6 |
fsRecLocksThe current number of record locks.ro INTEGER .1.3.6.1.4.1.130.1.2.4.7 |
fsMaxRecLocksThe largest number of simultaneous record locks.ro INTEGER .1.3.6.1.4.1.130.1.2.4.8 |
fsPctCacheHitsThe percentage of cache buffer requests that the system was able to service using existing cache buffers, without reading new data from disk.ro INTEGER .1.3.6.1.4.1.130.1.2.4.9 |
fsCacheUnavailThe number of cache buffer requests that the server was unable to service without reading new data from disk.ro Counter .1.3.6.1.4.1.130.1.2.4.10 |
commresources OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.5 |
commTotBufsThe total communications buffer space (the amount of server RAM used for network communications) in kilobytes. This is configurable from the server's console. Note: The setting of this object will not take effect until the servers is rebooted.rw INTEGER .1.3.6.1.4.1.130.1.2.5.1 |
commBufUsageThe percentage of the communications buffer space currently in use.ro INTEGER .1.3.6.1.4.1.130.1.2.5.2 |
commAllocsFailedThe cumulative total of the number of buffers that could not be allocated since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.5.3 |
commSocksCfgThe maximum number of sockets that can be open at one time. Configurable from the server console. Note: The setting of this object will not take effect until the servers is rebooted.rw INTEGER .1.3.6.1.4.1.130.1.2.5.4 |
commSocksInUseThe percentage of the maximum configured sockets in use.ro INTEGER .1.3.6.1.4.1.130.1.2.5.5 |
commMaxOpenSocksThe maximum number of sockets in use since the server was last booted.ro INTEGER .1.3.6.1.4.1.130.1.2.5.6 |
vip OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.6 |
vipTotInThe total number of VINES IP packets that the server has received since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.6.1 |
vipTotOutThe total number of VINES IP packets that the server has sent since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.6.2 |
vipBadThe number of packets that the server has received since the server was last booted that had an incorrect checksum.ro Counter .1.3.6.1.4.1.130.1.2.6.3 |
vipRoutedThe total number of packets that were routed to another node since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.6.4 |
vipRoutedHWMThe largest number of packets routed in 1 second since the server was last booted.ro INTEGER .1.3.6.1.4.1.130.1.2.6.5 |
vipBcastThe number of VINES IP broadcast packets sent, both generated from the server and routed from other nodes.ro Counter .1.3.6.1.4.1.130.1.2.6.6 |
vipBcastHWMThe largest number of packets broadcast in 1 second since the server was last booted.ro INTEGER .1.3.6.1.4.1.130.1.2.6.7 |
vipReassThe number of times packets were reassembled since the server was last booted. One VINES IP packet being broken into three message fragments is counted as one fragmentation. The three fragments being reassembled into one VINES IP packet counts as one reassembly.ro Counter .1.3.6.1.4.1.130.1.2.6.8 |
vipFragsThe number of packet fragmentations performed since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.6.9 |
vipToDodIPThe number of packets that VINES IP passed to DARPA IP (TCP/IP) for encapsulation in IP headers since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.6.10 |
vipFromDodIPThe number of packets that VINES IP received from DARPA IP (TCP/IP) since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.6.11 |
vipInFragmentsThe number of fragments received since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.6.12 |
vipTooSmallThe number of packets that the server has received since the server was last booted that were too small.ro Counter .1.3.6.1.4.1.130.1.2.6.13 |
vipBadLengthThe number of packets that the server has received since the server was last booted that had an invalid packet length in the packet length field of the VINES IP header.ro Counter .1.3.6.1.4.1.130.1.2.6.14 |
vipNoBuffersThe number of packets that the server could not send, receive or route due to a lack of communication buffers since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.6.15 |
vrtp OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.7 |
vrtpNbrNumberThe number of entries in the neighbor table (NbrTable).ro INTEGER .1.3.6.1.4.1.130.1.2.7.1 |
vrtpNbrTableA list of information about neighbors of this server. SEQUENCE OF NbrEntry .1.3.6.1.4.1.130.1.2.7.2 |
vrtpNbrEntryThe information for each entry in the table. NbrEntry .1.3.6.1.4.1.130.1.2.7.2.1 |
vrtpNbrNetidThe network ID of the neighbor, which is the first part of the neighbor's VINES internet address. If the neighbor is a server the network number is the server's serial number.ro INTEGER .1.3.6.1.4.1.130.1.2.7.2.1.1 |
vrtpNbrSubNetidThe subnetwork ID of the neighbor, which is the second part of the neighbor's VINES internet address. If the neighbor is a server the subnetwork number is 1.ro INTEGER .1.3.6.1.4.1.130.1.2.7.2.1.2 |
vrtpNbrTypeThe type of the neighbor (workstation = pc).ro Enumeration .1.3.6.1.4.1.130.1.2.7.2.1.3 |
vrtpNbrIfTypeThe type of interface that the server uses to reach the neighbor.ro Enumeration .1.3.6.1.4.1.130.1.2.7.2.1.4 |
vrtpNbrRemAddressThe address of the neighbor's physical interface, such as a LAN address. If the neighbor is connected via an HDLC or asynchronous line this object specifies an internal ID.ro OCTET STRING .1.3.6.1.4.1.130.1.2.7.2.1.5 |
vrtpNbrLocAddressThe address of the server's physical interface, such as a LAN address.ro OCTET STRING .1.3.6.1.4.1.130.1.2.7.2.1.6 |
vrtpNbrLocSlotThe slot number of the interface card that the server uses to reach the neighbor.ro INTEGER .1.3.6.1.4.1.130.1.2.7.2.1.7 |
vrtpNbrLocLineThe number of the line on the serial card that the server uses to reach the neighbor. It does not apply to neighbors that are reached over LANs.ro INTEGER .1.3.6.1.4.1.130.1.2.7.2.1.8 |
vrtpNbrSvrNameThe name of the neighbor. If the neighbor is a workstation then this object has no meaning.ro OCTET STRING .1.3.6.1.4.1.130.1.2.7.2.1.9 |
vrtpRtNumberThe number of entires in the route table (RtTable).ro INTEGER .1.3.6.1.4.1.130.1.2.7.3 |
vrtpRtTableA list of networks and the routing information to find them. SEQUENCE OF RtEntry .1.3.6.1.4.1.130.1.2.7.4 |
vrtpRtEntryAn entry for one network. RtEntry .1.3.6.1.4.1.130.1.2.7.4.1 |
vrtpRtNetidThe network ID of the route's destination server.ro INTEGER .1.3.6.1.4.1.130.1.2.7.4.1.1 |
vrtpRtMetricThe routing metric used by the called server to reach the destination. The metric reflects the cost of the path to the destination, it is in 200-millisecond units.ro INTEGER .1.3.6.1.4.1.130.1.2.7.4.1.2 |
vrtpRtIdleThe time to live timer for this route's entry. This value indicicates the amount of time before the entry is removed from the called server's routing table. The value is returned in 90 second units.ro INTEGER .1.3.6.1.4.1.130.1.2.7.4.1.3 |
vrtpRtGateNetidThe network ID of the server that acts as the router for reaching the destination server.ro INTEGER .1.3.6.1.4.1.130.1.2.7.4.1.4 |
vrtpRtSvrNameThe name of the destination server.ro OCTET STRING .1.3.6.1.4.1.130.1.2.7.4.1.5 |
vrtpRtGateSvrNameThe name of the server that acts as the router for reaching the destination server.ro OCTET STRING .1.3.6.1.4.1.130.1.2.7.4.1.6 |
vrtpTotInThe number of VINES VRTP packets received since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.7.5 |
vrtpTotOutThe number of VINES VRTP packets sent since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.7.6 |
vrtpErrsInThe number of errors the VRTP protocol encountered while receiving packets, since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.7.7 |
vrtpNoBuffersInThe number of times that no communication buffers were available to process received RTP packets or create routine table entries.ro Counter .1.3.6.1.4.1.130.1.2.7.8 |
vrtpUpdatesInThe total number of update packets received.ro Counter .1.3.6.1.4.1.130.1.2.7.9 |
vrtpResponsesInThe number of responses received.ro Counter .1.3.6.1.4.1.130.1.2.7.10 |
vrtpRqstsInThe number of requests received.ro Counter .1.3.6.1.4.1.130.1.2.7.11 |
vrtpRqstLkUpInThe number of packets received that requested routing information.ro Counter .1.3.6.1.4.1.130.1.2.7.12 |
vrtpRqstSlrInfoInThe number of request packets received that requested VINES routine metric information on a source-level route (Sequenced Only).ro Counter .1.3.6.1.4.1.130.1.2.7.13 |
vrtpReinitInThe number reinitialization packets received (Sequenced Only).ro Counter .1.3.6.1.4.1.130.1.2.7.14 |
vrtpResyncInThe number of resynchronization operations or update packets received that contained information for synchronizing routing table entries.ro Counter .1.3.6.1.4.1.130.1.2.7.15 |
vrtpRedirInThe number of redirect packets received.ro Counter .1.3.6.1.4.1.130.1.2.7.16 |
vrtpFragsInThe number of update or response fragments received (Sequenced Only).ro Counter .1.3.6.1.4.1.130.1.2.7.17 |
vrtpFragsDropInThe number of packets dropped due to either the time taken to reassemble was too long or no communication buffer were available(SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.18 |
vrtpFragsBadInThe number of RTP fragments discarded because they had packet IDs that were out-of-sequence (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.19 |
vrtpFragsDupInThe number of RTP fragments that were dropped because they were duplicates of other fragments (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.20 |
vrtpFragsDoneInThe number of updates and responses that were fragmented or reassembled successfully(SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.21 |
vrtpReassBadInThe number of updates and responses that were not successfully fragmented or reassembled (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.22 |
vrtpOutdatedInThe number of received RTP packets discarded because they were outdated (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.23 |
vrtpNetInfoBadThe number of received outdated entries for logical networks (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.24 |
vrtpBadRdrsThe number of redirect packets discarded because of a bad length.ro Counter .1.3.6.1.4.1.130.1.2.7.25 |
vrtpBdcstInThe number of broadcasted RTP update packets received.ro Counter .1.3.6.1.4.1.130.1.2.7.26 |
vrtpNoBuffersOutThe number of times that no communication buffers were available to send RTP packets.ro Counter .1.3.6.1.4.1.130.1.2.7.27 |
vrtpUpdatesOutThe total number of update packets sent.ro Counter .1.3.6.1.4.1.130.1.2.7.28 |
vrtpRqstLkUpOutThe number of packets sent that requested routing information.ro Counter .1.3.6.1.4.1.130.1.2.7.29 |
vrtpRqstSlrInfoOutThe number of request packets sent that requested VINES routine metric information on a source-level route (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.30 |
vrtpRqstsOutThe number of requests sent.ro Counter .1.3.6.1.4.1.130.1.2.7.31 |
vrtpReinitOutThe number reinitialization packets sent (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.32 |
vrtpResyncOutThe number of resynchronization operations or update packets sent that contained information for synchronizing routing table entries.ro Counter .1.3.6.1.4.1.130.1.2.7.33 |
vrtpRedirOutThe number of redirect packets sent.ro Counter .1.3.6.1.4.1.130.1.2.7.34 |
vrtpFragsOutThe number of update or response fragments sent (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.35 |
vrtpFragsDoneOutThe number of updates and responses that were fragmented successfully (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.36 |
vrtpFragsBadOutThe number of updates and responses that were fragmented unsuccessfully (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.37 |
vrtpFragsDropOutThe number of packets dropped due to either the time taken to fragment the message was too long or no communication buffer were available (SEQUENCED ONLY).ro Counter .1.3.6.1.4.1.130.1.2.7.38 |
vrtpBdcstOutThe number of broadcasted RTP update packets sent.ro Counter .1.3.6.1.4.1.130.1.2.7.39 |
vrtpRtCrThe number of routes created by redirect packets.ro Counter .1.3.6.1.4.1.130.1.2.7.40 |
vrtpRtModThe number of routes modified by redirect packets.ro Counter .1.3.6.1.4.1.130.1.2.7.41 |
vrtpNbrAnchorsThe total entries in the neighbor table or total paths to all neighbors.ro Counter .1.3.6.1.4.1.130.1.2.7.42 |
vrtpNbrEntriesThe total entries in the neighbor table or total paths to all neighbors.ro Counter .1.3.6.1.4.1.130.1.2.7.43 |
vrtpNetEntriesThe total entries for networks in this server's network table.ro Counter .1.3.6.1.4.1.130.1.2.7.44 |
vrtpLkUpThe number of calls to look up network table entries by the server.ro Counter .1.3.6.1.4.1.130.1.2.7.45 |
vrtpBadLkUpThe number of calls to look up network table entries by the server that failed.ro Counter .1.3.6.1.4.1.130.1.2.7.46 |
vrtpNonSeqTotInThe number of non-sequenced RTP packets received.ro Counter .1.3.6.1.4.1.130.1.2.7.47 |
vrtpNonSeqTotOutThe number of non-sequenced RTP packets sent.ro Counter .1.3.6.1.4.1.130.1.2.7.48 |
vrtpNonSeqErrsInThe number of errors while receiving non-sequenced RTP packets.ro Counter .1.3.6.1.4.1.130.1.2.7.49 |
vrtpNonSeqUpdInThe number of non-sequenced update packets received.ro Counter .1.3.6.1.4.1.130.1.2.7.50 |
vrtpNonSeqRspInThe number of non-sequenced responses received.ro Counter .1.3.6.1.4.1.130.1.2.7.51 |
vrtpNonSeqRqstInThe number of non-sequenced requests received.ro Counter .1.3.6.1.4.1.130.1.2.7.52 |
vrtpNonSeqRdrInThe number of non-sequenced redirect packets received.ro Counter .1.3.6.1.4.1.130.1.2.7.53 |
vrtpBadNonSeqRdrInThe number of invalid non-sequenced redirect packets received.ro Counter .1.3.6.1.4.1.130.1.2.7.54 |
vrtpNonSeqBdcstInThe number of non-sequenced broadcast packets received.ro Counter .1.3.6.1.4.1.130.1.2.7.55 |
vrtpNonSeqUpdOutThe number of non-sequenced update packets sent.ro Counter .1.3.6.1.4.1.130.1.2.7.56 |
vrtpNonSeqRspOutThe number of non-sequenced responses sent.ro Counter .1.3.6.1.4.1.130.1.2.7.57 |
vrtpNonSeqRqstOutThe number of non-sequenced requests sent.ro Counter .1.3.6.1.4.1.130.1.2.7.58 |
vrtpNonSeqRdrOutThe number of non-sequenced redirect packets sent.ro Counter .1.3.6.1.4.1.130.1.2.7.59 |
vrtpNonSeqBdcstOutThe number of non-sequenced broadcast packets sent.ro Counter .1.3.6.1.4.1.130.1.2.7.60 |
vrtpResponsesOutThe number of responses sent.ro Counter .1.3.6.1.4.1.130.1.2.7.61 |
vspp OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.8 |
vsppConnsInUseThe number of SPP connections currently in use by processes on the server.ro INTEGER .1.3.6.1.4.1.130.1.2.8.1 |
vsppConnsCfgThe allowable maximum number of SPP connections that can be in use by processes on the server at one time. Note: The setting of this object will not take effect until the servers is rebooted.rw INTEGER .1.3.6.1.4.1.130.1.2.8.2 |
vsppMaxConnsThe maximum number of SPP connections in use at a single point in time since the server was last booted.ro INTEGER .1.3.6.1.4.1.130.1.2.8.3 |
vsppTotInThe total number of VINES SPP packets that the server has received since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.8.4 |
vsppTotOutThe total number of VINES SPP packets that the server has sent since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.8.5 |
vsppInErrsThe number of SPP errors encountered while receiving packets, since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.8.6 |
vsppBadTypeThe total number of packets received on SPP connections that had invalid SPP packet types.ro Counter .1.3.6.1.4.1.130.1.2.8.7 |
vsppNoBuffersThe number of packets that the server could not send, receive or route due to a lack of communication buffers since the server was last booted.ro Counter .1.3.6.1.4.1.130.1.2.8.8 |
vsppNoPortThe number of incoming packets that the server dropped due to an unmatched destination port or an unmatched connection ID.ro Counter .1.3.6.1.4.1.130.1.2.8.9 |
vsppDupsThe number of incoming packets that were duplicates of other packets.ro Counter .1.3.6.1.4.1.130.1.2.8.10 |
vsppBadOrderThe number of incoming packets that were received out of order.ro Counter .1.3.6.1.4.1.130.1.2.8.11 |
vsppDataInThe number of packets received on SPP connections.ro Counter .1.3.6.1.4.1.130.1.2.8.12 |
vsppAcksInThe number of acknowledgement packets received.ro Counter .1.3.6.1.4.1.130.1.2.8.13 |
vsppDiscInThe number of disconnected packets received on SPP connections.ro Counter .1.3.6.1.4.1.130.1.2.8.14 |
vsppProbesInThe number of probe packets received on SPP connections.ro Counter .1.3.6.1.4.1.130.1.2.8.15 |
vsppDataOutThe number of data packets sent on SPP connections.ro Counter .1.3.6.1.4.1.130.1.2.8.16 |
vsppAcksOutThe number of acknowledgement packets sent.ro Counter .1.3.6.1.4.1.130.1.2.8.17 |
vsppDiscOutThe number of disconnected packets sent on SPP connections.ro Counter .1.3.6.1.4.1.130.1.2.8.18 |
vsppProbesOutThe number of probe packets sent on SPP connections.ro Counter .1.3.6.1.4.1.130.1.2.8.19 |
vsppAbortsOutThe number of data packets that had the abort bit set.ro Counter .1.3.6.1.4.1.130.1.2.8.20 |
vsppLocalThe number of packets sent locally using SPP. connections.ro Counter .1.3.6.1.4.1.130.1.2.8.21 |
vinterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.9 |
vifNumberThe number of VINES interfaces configured on the server.ro INTEGER .1.3.6.1.4.1.130.1.2.9.1 |
vifTableList of interfaces with some statistics about each interface. SEQUENCE OF IfEntry .1.3.6.1.4.1.130.1.2.9.2 |
vifEntryInformation about one interface. IfEntry .1.3.6.1.4.1.130.1.2.9.2.1 |
vifSlotThe slot number of the interface's communications card.ro INTEGER .1.3.6.1.4.1.130.1.2.9.2.1.1 |
vifTypeThe interface type, types are the same as defined for vrtpNbrIfType in the vrtp neighbor table.ro Enumeration .1.3.6.1.4.1.130.1.2.9.2.1.2 |
vifDescrA textual description of the interface.ro OCTET STRING .1.3.6.1.4.1.130.1.2.9.2.1.3 |
vifAddressThe physical address of the interface, applies to LAN interfaces only.ro OCTET STRING .1.3.6.1.4.1.130.1.2.9.2.1.4 |
vifInPktsThe total number of VINES IP packets that the server received since the last reboot.ro Counter .1.3.6.1.4.1.130.1.2.9.2.1.5 |
vifInErrsThe total number of received VINES IP packets that contained errors since the last reboot.ro Counter .1.3.6.1.4.1.130.1.2.9.2.1.6 |
vifOutPktsThe total number of VINES IP packets that the server sent since the last reboot.ro Counter .1.3.6.1.4.1.130.1.2.9.2.1.7 |
vifOutErrsThe total number of transmitted VINES IP packets that contained errors since the last reboot.ro Counter .1.3.6.1.4.1.130.1.2.9.2.1.8 |
vifLnkNumberThe number of serial links connected to the server.ro INTEGER .1.3.6.1.4.1.130.1.2.9.3 |
vifLnkTableData link level statistics for the serial lines on this server. SEQUENCE OF LnkEntry .1.3.6.1.4.1.130.1.2.9.4 |
vifLnkEntryStats for one serial line. LnkEntry .1.3.6.1.4.1.130.1.2.9.4.1 |
vifLnkSlotThe slot number of the serial communications card to which the serial line is connected.ro INTEGER .1.3.6.1.4.1.130.1.2.9.4.1.1 |
vifLnkLineThe line number of the line on the serial communications card.ro INTEGER .1.3.6.1.4.1.130.1.2.9.4.1.2 |
vifLnkTypeThe type of data link level protocol used on this line. 1 Asynchronous Terminal Emulation. 7 Block asynchronous. 8 High-level Data Link Control (HDLC). 9 X.25 10 Synchronous DataLink Control (SDLC) 1. 11 3270/BSC bisynchronous communication. 12 Same as SDLC1 except line is connected to an ICA card.ro Enumeration .1.3.6.1.4.1.130.1.2.9.4.1.3 |
vifLnkTotInThe total number of frames received.ro Counter .1.3.6.1.4.1.130.1.2.9.4.1.4 |
vifLnkTotOutThe total number of frames transmitted.ro Counter .1.3.6.1.4.1.130.1.2.9.4.1.5 |
vifLnkRetransThe total number of frames retransmitted.ro Counter .1.3.6.1.4.1.130.1.2.9.4.1.6 |
vifLnkCRCErrsThe number of errors due to CRC or frames that the card dropped.ro Counter .1.3.6.1.4.1.130.1.2.9.4.1.7 |
vifLnkDropsThe number of frames that the server could not receive due to a lack of communications buffers.ro Counter .1.3.6.1.4.1.130.1.2.9.4.1.8 |
vifLnkUndersThe total number of transmitter underrun errors on receive.ro Counter .1.3.6.1.4.1.130.1.2.9.4.1.9 |
vifLnkOversThe total number of receiver overrun errors on receive.ro Counter .1.3.6.1.4.1.130.1.2.9.4.1.10 |
vifLnkFrmErrsThe total number of framing errors.ro Counter .1.3.6.1.4.1.130.1.2.9.4.1.11 |
vifX25VCNumberThe number of X.25 virtual circuits that are available to the server.ro INTEGER .1.3.6.1.4.1.130.1.2.9.5 |
vifX25VCTableA list of X.25 packet level statistics for the virtual circuit. SEQUENCE OF X25VCEntry .1.3.6.1.4.1.130.1.2.9.6 |
vifX25VCEntryStatistics for one virtual circuit. X25VCEntry .1.3.6.1.4.1.130.1.2.9.6.1 |
vifX25VCSlotThe slot number of the serial communications card to which the virtual circuit's line is connected.ro INTEGER .1.3.6.1.4.1.130.1.2.9.6.1.1 |
vifX25VCLineThe number of the X.25 line configured on the serial communications card.ro INTEGER .1.3.6.1.4.1.130.1.2.9.6.1.2 |
vifX25VCSessionThe local session number of the virtual circuit.ro INTEGER .1.3.6.1.4.1.130.1.2.9.6.1.3 |
vifX25VCTotInThe total number of VINES IP packets received on this VC.ro Counter .1.3.6.1.4.1.130.1.2.9.6.1.4 |
vifX25VCTotOutThe total number of VINES IP packets sent on this VC.ro Counter .1.3.6.1.4.1.130.1.2.9.6.1.5 |
vifX25VCInErrsThe total number of received X.25 packets that contained errors.ro Counter .1.3.6.1.4.1.130.1.2.9.6.1.6 |
vifX25VCOutErrsThe total number of transmitted X.25 packets that contained errors.ro Counter .1.3.6.1.4.1.130.1.2.9.6.1.7 |
vifX25VCPktsOutThe total number of X.25 packets transmitted.ro Counter .1.3.6.1.4.1.130.1.2.9.6.1.8 |
vifX25VCPktsAwaitAckThe total number of X.25 packets transmitted that are awaiting acknowledgement.ro INTEGER .1.3.6.1.4.1.130.1.2.9.6.1.9 |
vifX25VCBytesOutThe total number of bytes transmitted.ro Counter .1.3.6.1.4.1.130.1.2.9.6.1.10 |
vifX25VCBytesAwaitAckThe total number of bytes transmitted that are awaiting acknowledgement.ro INTEGER .1.3.6.1.4.1.130.1.2.9.6.1.11 |
vifX25VCPktsInThe total number of X.25 packets that have been received.ro Counter .1.3.6.1.4.1.130.1.2.9.6.1.12 |
vifX25VCBytesInThe total number of bytes received.ro Counter .1.3.6.1.4.1.130.1.2.9.6.1.13 |
vifX25VCResetsInThe total number of X.25 reset packets received.ro Counter .1.3.6.1.4.1.130.1.2.9.6.1.14 |
vifX25VCResetsOutThe total number of X.25 reset packets transmitted.ro Counter .1.3.6.1.4.1.130.1.2.9.6.1.15 |
vifX25VCLogChnNumThe logical channel number of the X.25 VC.ro INTEGER .1.3.6.1.4.1.130.1.2.9.6.1.16 |
vifX25VCRemAddrThe DTE address of the remote server on the other end of the VC.ro OCTET STRING .1.3.6.1.4.1.130.1.2.9.6.1.17 |
vifStatsListA list of statistics for each LAN card in the server. The type and quantity of statistics depend on the type of the card. SEQUENCE OF VifStatEntry .1.3.6.1.4.1.130.1.2.9.7 |
vifStatEntryThe statistics for one card. VifStatEntry .1.3.6.1.4.1.130.1.2.9.7.1 |
vifStatSlotThe slot number of the LAN interface card.ro INTEGER .1.3.6.1.4.1.130.1.2.9.7.1.1 |
vifStatIndexA unique value for each statistic, used by SNMP to order the table.ro INTEGER .1.3.6.1.4.1.130.1.2.9.7.1.2 |
vifStatDescrA brief description of the statistic.ro OCTET STRING .1.3.6.1.4.1.130.1.2.9.7.1.3 |
vifStatValueThe value of the statistic.ro INTEGER .1.3.6.1.4.1.130.1.2.9.7.1.4 |
os OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.10 |
ossysstats OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.10.1 |
oscpuNumThe number of processors.ro INTEGER .1.3.6.1.4.1.130.1.2.10.1.1 |
oscpuTableA list of processors on the server. SEQUENCE OF CpuEntry .1.3.6.1.4.1.130.1.2.10.1.2 |
oscpuEntryEach entry contains a set of statistics for one CPU. CpuEntry .1.3.6.1.4.1.130.1.2.10.1.2.1 |
cpuIndexA unique value for each processor on the server.ro INTEGER .1.3.6.1.4.1.130.1.2.10.1.2.1.1 |
cpuIdleUsageThe amount of time that the CPU was completely idle since boot time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.10.1.2.1.2 |
cpuUserUsageThe amount of time the CPU spent running processes that run in user space since boot time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.10.1.2.1.3 |
cpuSysUsageThe amount of time the CPU spent running processes that run in system mode since boottime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.10.1.2.1.4 |
cpuWIOUserUsageThe amount of time that the CPU was idle, but at least one process was waiting for an I/O operation to complete, since boot time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.10.1.2.1.5 |
cpuProcSwappedOutThe amount of time that the CPU had processes swapped out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.10.1.2.1.6 |
cpuWIOUsageThe amout of time that the CPU waited for I/O to occur.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.10.1.2.1.7 |
cpuWSUsageThe amout of time that the CPU waited for a swap to occur.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.10.1.2.1.8 |
cpuWPIOUsageThe amout of time that the CPU waited for device I/O to occur.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.10.1.2.1.9 |
osBReadsThe number of transfers from disk to system buffers since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.3 |
osBWritesThe number of transfers from system buffers to disk since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.4 |
osLReadsThe number of reads on the system buffers since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.5 |
osLWritesThe number of writes on the system buffers since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.6 |
osPReadsThe number of reads via the raw (physical) device mechanism since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.7 |
osPWritesThe number of writes via the raw (physical) device mechanism since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.8 |
osInSwapsThe number of swaps in since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.9 |
osOutSwapsThe number of swaps out since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.10 |
osInBSwapsThe number of 4 KB buffers transferred in since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.11 |
osOutBSwapsThe number of 4 KB buffers transferred out since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.12 |
osProcessSwitchesThe number of process switches since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.13 |
osSystemCallsThe number of system calls since boot time.ro Counter .1.3.6.1.4.1.130.1.2.10.1.14 |
osSystemReadThe number of system read calls.ro Counter .1.3.6.1.4.1.130.1.2.10.1.15 |
osSystemWriteThe number of system write calls.ro Counter .1.3.6.1.4.1.130.1.2.10.1.16 |
osSystemForkThe number of system fork calls.ro Counter .1.3.6.1.4.1.130.1.2.10.1.17 |
osSystemExecThe number of system exec calls.ro Counter .1.3.6.1.4.1.130.1.2.10.1.18 |
osRunQueueThe number of processes on the run queue.ro Counter .1.3.6.1.4.1.130.1.2.10.1.19 |
osRunQueueOccThe amount of time that processes were on the run queue.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.10.1.20 |
osSwapQueueTotalsThe number of processes on the swap queue.ro Counter .1.3.6.1.4.1.130.1.2.10.1.21 |
osSwapQueueOccThe amount of time that processes were on the swap queue.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.10.1.22 |
osIPCMsgOpsThe number of times a System V IPC message operation occurred.ro Counter .1.3.6.1.4.1.130.1.2.10.1.23 |
osSemOpsThe number of semaphore operations performed by processes.ro Counter .1.3.6.1.4.1.130.1.2.10.1.24 |
osPnpFaultThe number of times a process accessed a page which had not been page faulted in.ro Counter .1.3.6.1.4.1.130.1.2.10.1.25 |
osWrtFaultThe number of times processes attempted to write to a page marked as copy-on-write.ro Counter .1.3.6.1.4.1.130.1.2.10.1.26 |
osCurrentInodesThe number of inode table entries currently in the inode table.ro INTEGER .1.3.6.1.4.1.130.1.2.10.1.27 |
osHWInodesThe high water mark of inode table entries in use since the last reboot of the called server.ro INTEGER .1.3.6.1.4.1.130.1.2.10.1.28 |
osCurrentFilesThe number of open file table entries currently in the open file table.ro INTEGER .1.3.6.1.4.1.130.1.2.10.1.29 |
osHWFilesThe high water mark of open file table entries in use since the last reboot of the called server.ro INTEGER .1.3.6.1.4.1.130.1.2.10.1.30 |
osinfo OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.10.2 |
osMaxInodesThe maximum number of inode table entries in the inode table.ro INTEGER .1.3.6.1.4.1.130.1.2.10.2.1 |
osMaxFilesThe maximum number of open file table entries in the open file table.ro INTEGER .1.3.6.1.4.1.130.1.2.10.2.2 |
osMaxProcessesThe maximum number of process table entries that UNIX on the server allocates.ro INTEGER .1.3.6.1.4.1.130.1.2.10.2.3 |
osSwapSpaceAvailableThe amount of swap space available in 512 byte blocks.ro INTEGER .1.3.6.1.4.1.130.1.2.10.2.4 |
osFreeMemoryTotalThe total amount of executable space in kilobytes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.2.5 |
osIOBufsThe number of 1 KB system buffers that make up UNIX cache on the server.ro INTEGER .1.3.6.1.4.1.130.1.2.10.2.6 |
osMountsThe number of mount table entries that UNIX on the server allocates.ro INTEGER .1.3.6.1.4.1.130.1.2.10.2.7 |
osUserMaxPuThe maximum number of concurrent UNIX processes that can be run by users other than the superuser.ro INTEGER .1.3.6.1.4.1.130.1.2.10.2.8 |
osUserMaxFpThe maximum number of open files per process.ro INTEGER .1.3.6.1.4.1.130.1.2.10.2.9 |
ossummstats OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.10.3 |
osCurrentProcessesThe current number of entries in the process table.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.1 |
osSwapSpaceUsedThe amount of swap space in use in 512 byte blocks.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.2 |
osFreeMemoryAvailableThe amount of executable space, in kilobytes, currently available.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.3 |
osUserUsagePctThe percentage of time the CPU spent running processes that run in user space over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.4 |
osSysUsagePctThe percentage of time the CPU spent running processes that run in system mode over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.5 |
osWIOUsagePctThe percentage of time that the CPU was idle, but at least one process was waiting for an I/O operation to complete, over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.6 |
osIdleUsagePctThe percentage of time that the CPU was idle over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.7 |
osRunOccPctThe percentage of time that processes occupied the run queue over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.8 |
osSwapOccPctThe percentage of time that processes occupied the swap queue over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.9 |
osBuffRdRateThe average number of times per second that data was read from disk into UNIX system buffers over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.10 |
osRdCachePctThe percentage of read requests for UNIX system buffers that the kernel was able to service using existing UNIX system buffers, without reading new data from disk over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.11 |
osBuffWrRateThe average number of times per second that data was written from UNIX system buffers to disk over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.12 |
osWrCachePctThe percentage of write requests for UNIX system buffers that the kernel was able to service using existing UNIX system buffers, without writing new data to disk over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.13 |
osBswpInRateThe average number of 4 KB pages that were swapped or paged from disk to main memory per second over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.14 |
osBswpOutRateThe average number of 4 KB pages that were swapped or paged from main memory to disk per second over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.15 |
osVfltRateThe average number of validity faults per second over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.16 |
osSwitchRateThe average number of process switches per second over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.17 |
osSysCallRateThe average number of UNIX system calls that processes issued per second over the last five minutes.ro INTEGER .1.3.6.1.4.1.130.1.2.10.3.18 |
nmthresholds OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.11 |
nmLoadAvg15HighThresA High threshold value for the 15-minute average of server load (ssLoadAvg15). If the value of ssLoadAvg15 goes above this, a VINES alert and a nmLoadAvgHigh Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.1 |
nmSockInUseHighThresA High threshold value for the percentage of maximum configured sockets currently in use (commSocksInUse). If the value of commSocksInUse goes above this, a VINES alert and a nmSockInUseHigh Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.2 |
nmDiskUseHighThresA High threshold value for the percentage of disk space in use on any given disk (dskUsedPct). If the value of dskUsedPct goes above this, a VINES alert and a nmDiskFull Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.3 |
nmSwapAvgHighThresA High threshold value for the 1-minute average of process swapping (ssSwapAvg). If the value of ssSwapAvg goes above this, a VINES alert and a nmSwapAvgHigh Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.4 |
nmDropsHighThresA High threshold value for the no. of messages dropped due to lack of comm buffer space (ssDrops). If the value of ssDrops goes above this, a VINES alert and a nmDropsHigh Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.5 |
nmSwapSpaceLowThresA Low threshold value for the amount of swap space available (osSwapSpaceAvailable). If the value of osSwapSpaceAvailable drops below this, a VINES alert and a nmFreeSwapLow Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.6 |
nmFreeMemLowThresA Low threshold value for the amount of memory free (osFreeMemoryAvailable). If the value of osFreeMemoryAvailable drops below this, a VINES alert and a nmFreeMemLow Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.7 |
nmCommBuffHighThresA High threshold value for the percentage of total comms buffer space currently in use (commBufUsage). If the value of commBufUsage goes above this, a VINES alert and a nmCommBuffHigh Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.8 |
nmAllocFailHighThresA High threshold value for the total of comm. buffers that could not be allocated since the last reboot (commAllocsFailed). If the value of commAllocsFailed goes above this, a VINES alert and a nmAllocFailHigh Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.9 |
nmCacheHitsLowThresA Low threshold value for the percentage of cache buffer requests that the system was able to service using existing cache buffers (fsPctCacheHits). If the value of fsPctCacheHits falls below this, a VINES alert and a nmCacheHitsLow Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.10 |
nmDiskBusyHighThresA High threshold value for the 5-minute average of the percentage of time a disk was in use transferring data (dskPctBusy). If the value of dskPctBusy rises above this, a VINES alert and a nmDiskBusy Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.11 |
nmMsgAvgHighThresA High threshold value for the 1-minute average of network messages sent/received per second (ssMsgAvg1). If the value of ssMsgAvg1 goes above this, a VINES alert and a nmMsgAvgHigh Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.12 |
nmInodeUseHighThresA High threshold value for the number of inode table entries currently in the inode table (osCurrentInodes). If the value of osCurrentInodes rises above this, a VINES alert and a nmInodesHigh Trap are generated.rw INTEGER .1.3.6.1.4.1.130.1.2.11.13 |
trapdata OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.12 |
tpAlertTimeThe system time when alert was issued to the Alert Management Service, as specified in UNIX time() format. INTEGER .1.3.6.1.4.1.130.1.2.12.1 |
tpErrorCodeA VINES error code. INTEGER .1.3.6.1.4.1.130.1.2.12.2 |
tpUserNameA VINES StreetTalk user name. OCTET STRING .1.3.6.1.4.1.130.1.2.12.3 |
tpSvcNameThe StreetTalk Service name which issued the trap. OCTET STRING .1.3.6.1.4.1.130.1.2.12.4 |
tpSvrNameThe name of the Server on which the trap was issued. OCTET STRING .1.3.6.1.4.1.130.1.2.12.5 |
tpRefSvcNameA StreetTalk Service name. OCTET STRING .1.3.6.1.4.1.130.1.2.12.6 |
tpRefSvrNameThe name of a Server. OCTET STRING .1.3.6.1.4.1.130.1.2.12.7 |
tpJobIdThe Job Identifier for a particular job in the Print Service. INTEGER .1.3.6.1.4.1.130.1.2.12.8 |
tpPaperFormatThe paper format type specified for a print job. OCTET STRING .1.3.6.1.4.1.130.1.2.12.9 |
tpJobTotalThe current number of jobs in the print queue. INTEGER .1.3.6.1.4.1.130.1.2.12.10 |
tpConnIdA PostScript print service connection ID. INTEGER .1.3.6.1.4.1.130.1.2.12.11 |
tpMailSenderThe StreetTalk user name of a mail sender. OCTET STRING .1.3.6.1.4.1.130.1.2.12.12 |
tpPortIdThe Port ID being reported by VINES Security is the scene of a possible security breach. OCTET STRING .1.3.6.1.4.1.130.1.2.12.13 |
tpRtnNameThe name of the executing routine when the STDA service encountered a fatal error. OCTET STRING .1.3.6.1.4.1.130.1.2.12.14 |
tp162erravgThe current average of 162 errors. INTEGER .1.3.6.1.4.1.130.1.2.12.15 |
tp162errThresHighThe High Threshold for 162 errors in ST. INTEGER .1.3.6.1.4.1.130.1.2.12.16 |
tp162errTotalThe current total of 162 errors in ST. INTEGER .1.3.6.1.4.1.130.1.2.12.17 |
tpGrpNameA StreetTalk Group Name. OCTET STRING .1.3.6.1.4.1.130.1.2.12.18 |
tpNumGrpsThe number of groups being maintained by StreetTalk on a given server (as a percentage of the maximum allowed no. INTEGER .1.3.6.1.4.1.130.1.2.12.19 |
tpGrpLimitThe maximum number of groups allowed on a server. INTEGER .1.3.6.1.4.1.130.1.2.12.20 |
tpOldSerNumA server's old serial number. INTEGER .1.3.6.1.4.1.130.1.2.12.21 |
tpNewSerNumA server's new serial number. INTEGER .1.3.6.1.4.1.130.1.2.12.22 |
tpDiskSpaceLeftThe amount of disk space left (KB) available to the Mail Service. INTEGER .1.3.6.1.4.1.130.1.2.12.23 |
tpMailMessageIdThe internal message ID of an item in the mail service. OCTET STRING .1.3.6.1.4.1.130.1.2.12.24 |
tpSockOvFlowNumThe number of packets dropped due to a socket overflow. INTEGER .1.3.6.1.4.1.130.1.2.12.25 |
tpDiskNNameThe name of a disk unit. OCTET STRING .1.3.6.1.4.1.130.1.2.12.26 |
tpSvrNetIdThe server NetID. INTEGER .1.3.6.1.4.1.130.1.2.12.27 |
tpSubNetIdA VINES subnetwork ID. INTEGER .1.3.6.1.4.1.130.1.2.12.28 |
tpSlotNumThe Slot Number of a particular interface card. INTEGER .1.3.6.1.4.1.130.1.2.12.29 |
tpLineNumThe Line Number on the interface board. INTEGER .1.3.6.1.4.1.130.1.2.12.30 |
tpFRcvdThe number of frames received. INTEGER .1.3.6.1.4.1.130.1.2.12.31 |
tpFXmtdThe number of frames transmitted. INTEGER .1.3.6.1.4.1.130.1.2.12.32 |
tpLnkDropsThresThe threshold value for link-level drops - when exceeded an alert is issued. INTEGER .1.3.6.1.4.1.130.1.2.12.33 |
tpLnkReXtThresThe threshold value for link-level re-transmits - when exceeded an alert is isssued. INTEGER .1.3.6.1.4.1.130.1.2.12.34 |
ams OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.13 |
amsRegTableThe Table containing entries for each seperate registration with AMS to receive alerts. SEQUENCE OF AmsRegEntry .1.3.6.1.4.1.130.1.2.13.1 |
amsRegEntryEntry into amsRegTable. AmsRegEntry .1.3.6.1.4.1.130.1.2.13.1.1 |
amsRegIndexThe index value into the amsRegTable used by SNMP.ro INTEGER .1.3.6.1.4.1.130.1.2.13.1.1.1 |
amsRegIdInstanceThe alert instance string that the registered party is interested in.ro OCTET STRING .1.3.6.1.4.1.130.1.2.13.1.1.2 |
amsRegIdClassThe application class that the registered party is interested in receiving alerts from.ro INTEGER .1.3.6.1.4.1.130.1.2.13.1.1.3 |
amsRegIdTidThe alert template identifier that the registered party is interested in.ro INTEGER .1.3.6.1.4.1.130.1.2.13.1.1.4 |
amsRegPortThe Port to which the alerts are to be sent. This will be NULL if amsRegAction is something other than a notification sent to an IPC Port.ro OCTET STRING .1.3.6.1.4.1.130.1.2.13.1.1.5 |
amsRegWhoAddedThe StreetTalk name of the user who added this particular entry to the table.ro OCTET STRING .1.3.6.1.4.1.130.1.2.13.1.1.6 |
amsRegAlerteeThe StreetTalk name of the user to whom the alerts are to be sent. This will be NULL if the amsRegAction for this entry is 'sendipcport'.ro OCTET STRING .1.3.6.1.4.1.130.1.2.13.1.1.7 |
amsRegActionThe action to perform with alerts that match for this entry. The available options are : sendipcport - Pass the alert to the specific registered IPC port, as specified in 'amsRegPort'. bleepstname - Send a 25th-line message containing the alert to the user 'amsRegAlertee'.ro Enumeration .1.3.6.1.4.1.130.1.2.13.1.1.8 |
amsAlertLogTableThe Table containing entries for each each record written into each of the AMS alert log files. SEQUENCE OF AmsLogEntry .1.3.6.1.4.1.130.1.2.13.2 |
amsLogEntryEntry into amsAlertLogTable. AmsLogEntry .1.3.6.1.4.1.130.1.2.13.2.1 |
amsLogFileIndexThe index value into the amsRegTable used to distinguish between the alert log files kept by AMS. Options are: previous - The previous day's log. current - Today's log file. The log files are switched at 12:00am each night, when 'today' becomes 'yesterday' and 'yesterday' is emptied and becomes 'today'.ro Enumeration .1.3.6.1.4.1.130.1.2.13.2.1.1 |
amsLogRecIndexThe index value into the amsAlertLogTable used to uniquely identify each record in a given alert log.ro INTEGER .1.3.6.1.4.1.130.1.2.13.2.1.2 |
amsLogIdInstanceThe alert instance string of the AlertID in the alert record.ro OCTET STRING .1.3.6.1.4.1.130.1.2.13.2.1.3 |
amsLogIdClassThe application class of the AlertID in the alert record.ro INTEGER .1.3.6.1.4.1.130.1.2.13.2.1.4 |
amsLogIdTidThe template identifier of the AlertID in the alert record.ro INTEGER .1.3.6.1.4.1.130.1.2.13.2.1.5 |
amsLogAlertTimeThe time at which the alert was originally issued.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.130.1.2.13.2.1.6 |
amsLogAlertStringThe textual string description of the alert including all data values.ro OCTET STRING .1.3.6.1.4.1.130.1.2.13.2.1.7 |
mailservice OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.14 |
mlMailBoxTableThe Table containing entries for each Mailbox maintained by the Mail Service. SEQUENCE OF MlMailBoxTableEntry .1.3.6.1.4.1.130.1.2.14.1 |
mlMailBoxTableEntryEntry into mlMailBoxTable. MlMailBoxTableEntry .1.3.6.1.4.1.130.1.2.14.1.1 |
mlMBTableIndexThe index value into the mlMailBoxTable used by SNMP.ro INTEGER .1.3.6.1.4.1.130.1.2.14.1.1.1 |
mlMBTableMBOwnerThe StreetTalk name of the user to whom this mailbox relates.ro OCTET STRING .1.3.6.1.4.1.130.1.2.14.1.1.2 |
mlMBTableUnreadMsgsThe number of unread messages in this mailbox.ro INTEGER .1.3.6.1.4.1.130.1.2.14.1.1.3 |
mlMBTableTotalMsgsThe total number of messages in this mailbox.ro INTEGER .1.3.6.1.4.1.130.1.2.14.1.1.4 |
vlogs OBJECT IDENTIFIER .1.3.6.1.4.1.130.1.2.15 |
vlogsTableThe Table containing entries for each log. SEQUENCE OF VlogsEntry .1.3.6.1.4.1.130.1.2.15.1 |
vlogsEntryEntry into vlogsEntry. VlogsEntry .1.3.6.1.4.1.130.1.2.15.1.1 |
vlogsFileIndexThe index value into the vlogsTable.ro Enumeration .1.3.6.1.4.1.130.1.2.15.1.1.1 |
vlogsDescrThe record entry for the log.ro OCTET STRING .1.3.6.1.4.1.130.1.2.15.1.1.2 |