BANYAN-NW-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BANYAN-NW-MIB.
125
Objects
Active
Status
1
Dependencies
Imported Objects
Objects
125 total| Object Name |
|---|
banyan OBJECT IDENTIFIER .1.3.6.1.4.1.130 |
others OBJECT IDENTIFIER .1.3.6.1.4.1.130.2 |
netware OBJECT IDENTIFIER .1.3.6.1.4.1.130.2.1 |
nwmib1 OBJECT IDENTIFIER .1.3.6.1.4.1.130.2.1.1 |
nwfsinfo OBJECT IDENTIFIER .1.3.6.1.4.1.130.2.1.1.1 |
nwNameThe name of the NetWare file server.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.1.1 |
nwCompanyThe company name.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.1.2 |
nwRevThe NetWare software revision for this server.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.1.3 |
nwRevDateThe release date of the NetWare software revision.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.1.4 |
nwCopyRightThe copyright for NetWare software.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.1.5 |
nwConnsSuppThe number of connections supported.ro INTEGER .1.3.6.1.4.1.130.2.1.1.1.6 |
nwConnsInUseThe current number of connections in use.ro INTEGER .1.3.6.1.4.1.130.2.1.1.1.7 |
nwPeakConnectionsUsedThe highest number of connections used since server came up.ro INTEGER .1.3.6.1.4.1.130.2.1.1.1.8 |
nwMaxVolsSuppMaximum number of volumes supported.ro INTEGER .1.3.6.1.4.1.130.2.1.1.1.9 |
nwRevArrayThe Revision of the NetWare software displayed in hex.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.1.10 |
nwperipherals OBJECT IDENTIFIER .1.3.6.1.4.1.130.2.1.1.2 |
nwVolNumberThe number of volumes.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.1 |
nwVolTableThe Table containing entries for each volume. SEQUENCE OF NwVolEntry .1.3.6.1.4.1.130.2.1.1.2.2 |
nwVolEntryEntry into the volume table. NwVolEntry .1.3.6.1.4.1.130.2.1.1.2.2.1 |
nwVolIndexA unique value for each volume on the server, used to order the list.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.1 |
nwVolNameA string containing the name of the volume.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.2.2.1.2 |
nwVolDriveThe logical drive number.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.3 |
nwVolSectorsPerBlkThe number of sectors per block. This is the number of 512-byte sectors contained in each block of the volume.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.4 |
nwVolStartBlkThe first block available for you to use for data.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.5 |
nwVolTotalBlksThe total number of blocks for this volume.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.6 |
nwVolAvailBlksThe number of available blocks for this volume.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.7 |
nwVolTotalDirSlotsThe total number of directory slots for this volume.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.8 |
nwVolAvailDirSlotsThe number of currently available directory slots for this volume.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.9 |
nwVolMaxDirSlotsThe peak number of directory slots for this volume.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.10 |
nwVolHashingThe flag to indicate whether hashing is in use.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.11 |
nwVolRemovableThe flag to indicate if the media is removable.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.12 |
nwVolMountedThe flag to indicate if the volume is mounted.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.13 |
nwVolPurgeBlksThe number of blocks waiting to be purged.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.14 |
nwVolNotPurgeBlksThe number of blocks which cannot be purged.ro INTEGER .1.3.6.1.4.1.130.2.1.1.2.2.1.15 |
nwinterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.130.2.1.1.3 |
nwIfNumberThe number of interfaces for this NetWare file server.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.1 |
nwIfCfgTableThe Table containing entries for interface configuration information. SEQUENCE OF NwIfCfgEntry .1.3.6.1.4.1.130.2.1.1.3.2 |
nwIfCfgEntryEntry into the interface configuration table. NwIfCfgEntry .1.3.6.1.4.1.130.2.1.1.3.2.1 |
nwIfCfgSignatureThe string 'HardwareDriverMLID' followed by 8 spaces is the first entry in the configuration table.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.3.2.1.1 |
nwIfCfgMajVerThe current major version number of the configuration table structure.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.2 |
nwIfCfgMinVerThe current minor version number of the configuration table structure.(0..99 decimal).ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.3 |
nwIfCfgNodeAddressThe node address of the LAN board. An MLID can call ParseDriverParameters to prompt a console operator to configure this address at the command line. Otherwise the MLID can read the hardware to determine a board's node address.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.3.2.1.4 |
nwIfCfgModeFlagsThe mode flags with bit map as follows: bit 0 - set to 1. It indicates if a real driver. bit 1 - set driver uses DMA, bit 2 - reserved for NetWare; must be 0. bit 3 - set if driver supports multicasting, bit 4 - set to 0. bit 5 - set to 0. bit 6 - set if driver supports raw sends. bit 7 - set to 0. Unused bits are reserved and should always be set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.5 |
nwIfCfgBoardNoA unique value for each board in the configuration table used by SNMP to order the list. This corresponds to the logical board number (1- 63) assigned to this LAN board by the Link Support Layer (LSL).ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.6 |
nwIfCfgBoardInstThe (physical) board instance. The number of the physical card that the logical board is using. If your driver is driving one physical card, all the logical boards using this card would put a value 1 in this field. If you load a second physical card, the value 2 would be the board instance.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.7 |
nwIfCfgMaxDataSzThe largest possible packet size (in bytes) that can be transmitted and/or received by the LAN board.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.8 |
nwIfCfgMaxRcvSzThe maximum size (or best receive size) a packet could be.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.9 |
nwIfCfgRcvSzThe maximum size a protocol stack can send or receive using this board.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.10 |
nwIfCfgCardNameA string containing a name which uniquely identifies the interface card hardware.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.3.2.1.11 |
nwIfCfgShortNameA string describing the LAN board in 8 characters or less.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.3.2.1.12 |
nwIfCfgMediaTypeA string describing the MLID's frame type. Examples include `ETHERNET_802.3` and `ETHERNET_II`.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.3.2.1.13 |
nwIfCfgCardIdA reserved field. The Independent Manufacture Support Program (IMSP) assigns a number to each make of LAN board and/or drver if the table version is 1.0. This field is reserved if the table version is 1.1.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.14 |
nwIfCfgMediaIdThis number identifies the link-level envelope used by the MLID. The ID is associated with a FrameType (nwIfCfgMediaType) string and is assigned with the string. A few examples: MediaId FrameTypeString 01 - LocalTalk 02 - Ethernet_II 03 - Ethernet_802.2 04 - TokenRing 05 - 802.3 For more information contact Novell.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.15 |
nwIfCfgTransportTMThe time (in ticks) it takes the LAN board to transmit a 576 byte packet. This field cannot be 0. Most MLIDs will set this to a value of 1.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.16 |
nwIfCfgMlidMajVerThe current revision level of the MLID. It should match the revision level displayed by the MLID.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.17 |
nwIfCfgMlidMinVerThe current minor version number of the MLID.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.18 |
nwIfCfgFlagsThe bus types of physical cards that the MLID supports. Unused bits must be set to 0. EISA 0001h; set if supports EISA type physical card ISA 0002h; set if supports PC/AT type physical card MCA 0004h; set if supports Micro Channel type physical card. Bits 3 - 7 are set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.19 |
nwIfCfgSendRetriesNumber of times the MLID should retry send events before aborting the send.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.20 |
nwIfCfgShareFlagsBits which inform the system which hardware resources a driver/physical card can share with other driver/physical cards. bit 0 set if LAN board is currently shutdown; bit 1 set if LAN board can share I/O port #1; bit 2 set if LAN board can share I/O port #2; bit 3 set if LAN board can share memory range #1; bit 4 set if LAN board can share memory range #2; bit 5 set if LAN board can share interrupt #1; bit 6 set if LAN board can share interrupt #2; bit 7 set if LAN board can share DMA channel #1; bit 8 set if LAN board can share DMA channel #2; bit 9 set if driver has its own command line info to put in the AUTOEXEC.NCF file. bit 10 set if driver doesn't want any of default info put in the AUTOEXEC.NCF file. bits 11-15 - set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.21 |
nwIfCfgSlotIf a LAN board is running in Micro Channel or EISA machine, this field holds the slot number where the board is installed. If not used, it should be set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.22 |
nwIfCfgIoAddr1The primary I/O address for the interface card. If not used, it should be set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.23 |
nwIfCfgIoRange1The number of I/O ports used at IOAddr1. If not used, it should be set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.24 |
nwIfCfgIoAddr2The secondary I/O address for the interface card. If not used, it should be set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.25 |
nwIfCfgIoRange2The number of I/O ports used at IOAddr2. If not used, it should be set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.26 |
nwIfCfgMemAddr1The absolute primary memory address used by the LAN board. If not used, this is set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.27 |
nwIfCfgMemSize1The number of paragraphs (16 bytes) the LAN board uses, starting at nwIfCfgMemAddr1. If not used, it is set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.28 |
nwIfCfgMemAddr2The absolute secondary memory address used by the LAN board. If not used, this is set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.29 |
nwIfCfgMemSize2The number of paragraphs (16 bytes) the LAN board uses, starting at nwIfCfgMemAddr2. If not used, it is set to 0.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.30 |
nwIfCfgInt1The primary interrupt vector number. FFh = not used.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.31 |
nwIfCfgInt2The secondary interrupt vector number. FFh = not used.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.32 |
nwIfCfgDma1The primary DMA channel used by the LAN board. FFh = not used.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.33 |
nwIfCfgDma2The secondary DMA channel used by the LAN board. FFh = not used.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.2.1.34 |
nwIfStatsTableThe Table containing MLID module statistics. SEQUENCE OF NwIfStatsEntry .1.3.6.1.4.1.130.2.1.1.3.3 |
nwIfStatsEntryThe entry in the table containing MLID module statistics. NwIfStatsEntry .1.3.6.1.4.1.130.2.1.1.3.3.1 |
nwIfStatsMajVerThe current major version number of the generic portion of the statistics table. The current major version number is 2 for a Netware v3.1x Server. The number is defined by Novell.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.3.1.1 |
nwIfStatsMinVerThe current minor version number of the generic portion of the statistics table. The current minor version number is 0 for a Netware v3.1x Server. The number is defined by Novell.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.3.1.2 |
nwIfStatsValidMaskThe bit mask indicating which counters are valid. The first 13 bits (starting with most significant bit) represent fields in this statistics table. The value 0 indicates it is supported, the value 1 indicates it is not supported. The bit/counter correlations are determined by shifting left, as you move down the counters in the table.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.3.1.3 |
nwIfStatsTotalTxPktsThe total number of packets transmitted by this LAN board.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.4 |
nwIfStatsTotalRxPktsTotal number of incoming packets received by this LAN board.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.5 |
nwIfStatsNoAvailEcbsNumber of incoming packets that were lost because of unavailable ECBs.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.6 |
nwIfStatsTxTooBigsNumber of times the send packet was too big for this LAN board to send.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.7 |
nwIfStatsTxTooSmallsNumber of times the send packet was too small for this LAN board to send.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.8 |
nwIfStatsRxOverFlowsNumber of times the LAN board's receive buffers overflowed.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.9 |
nwIfStatsRxTooBigsNumber of times the LAN board could not receive a packet because the packet was too big.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.10 |
nwIfStatsRxTooSmallsNumber of times the LAN board could not receive a packet because the packet was too small.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.11 |
nwIfStatsTxMiscErrsThe number of transmit errors for the LAN board. This is MLID dependent.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.12 |
nwIfStatsRxMiscErrsThe number of receive errors for the LAN board. This is MLID dependent.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.13 |
nwIfStatsTxRetrysNumber of times the LAN board retried a transmit because of a failure.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.14 |
nwIfStatsRxChkSumErrsNumber of times a checksum error occured for this LAN board.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.15 |
nwIfStatsRxMismatchsThis is LAN medium-specific.ro Counter .1.3.6.1.4.1.130.2.1.1.3.3.1.16 |
nwIfStatsBoardNoA unique value for each board configured, used by SNMP to order the list of interface statistics. This corresponds to the the logical board number (1 - 63) assigned to this LAN board by the Link Support Layer (LSL).ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.3.1.17 |
nwIfStatsCustomThe total number of custom variables which follow this word.ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.3.1.18 |
nwIfCustomStatsTableThe Table containing custom variables. These are custom counters. SEQUENCE OF NwIfCustomStatsEntry .1.3.6.1.4.1.130.2.1.1.3.4 |
nwIfCustomStatsEntryThe entry in the table containing custom variables indexed by the board number and index of the custom variables. NwIfCustomStatsEntry .1.3.6.1.4.1.130.2.1.1.3.4.1 |
nwIfCustomStatsBoardNoA unique value for each board configured, used by SNMP to order the list of custom statistics. This corresponds to the the logical board number (1 - 63) assigned to this LAN board by the Link Support Layer (LSL).ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.4.1.1 |
nwIfCustomStatsIndexA unique value for each custom variable in the table. (There are a total of nwIfCustom variables).ro INTEGER .1.3.6.1.4.1.130.2.1.1.3.4.1.2 |
nwIfCustomStatsDescrA descriptive text string for the custom variable/counter.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.3.4.1.3 |
nwIfCustomStatsValueThe value associated with the custom variable/counter.ro Counter .1.3.6.1.4.1.130.2.1.1.3.4.1.4 |
nwprotocols OBJECT IDENTIFIER .1.3.6.1.4.1.130.2.1.1.4 |
nwProtNumberThe number of protocols supported by this server.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.1 |
nwProtCfgTableThe Table containing protocol configuration information. SEQUENCE OF NwProtCfgEntry .1.3.6.1.4.1.130.2.1.1.4.2 |
nwProtCfgEntryThe entry in the protocol configuration table. NwProtCfgEntry .1.3.6.1.4.1.130.2.1.1.4.2.1 |
nwProtCfgProtNoA unique value for each protocol configured, used by SNMP to order the list.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.2.1.1 |
nwProtCfgMajVerThe major version number of the configuration table.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.2.1.2 |
nwProtCfgMinVerThe minor version number of the configuration table.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.2.1.3 |
nwProtCfgNameA string used to register the protocol stack with the Link Support Lanyer (LSL). This string cannot have more than 15 characters (not including the length byte or zero terminator) and cannot be 0.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.4.2.1.4 |
nwProtCfgRegNameA string containing the name of the protocol stack. It is a length-preceded, zero-terminated string.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.4.2.1.5 |
nwProtCfgStkMajVerThe major version number of the protocol stack. The number in this field is a decimal number.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.2.1.6 |
nwProtCfgStkMinVerThe minor version number of the protocol stack. The number in this field is a decimal number.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.2.1.7 |
nwProtStatsTableThe table containing protocol statistics information. SEQUENCE OF NwProtStatsEntry .1.3.6.1.4.1.130.2.1.1.4.3 |
nwProtStatsEntryThe entry in the protocol statistics table indexed by the protocol statistics number. NwProtStatsEntry .1.3.6.1.4.1.130.2.1.1.4.3.1 |
nwProtStatsProtNoA unique value for each protocol supported on the server, used by SNMP to order the list.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.3.1.1 |
nwProtStatsMajVerThe major version number of the protocol stack statistics table.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.3.1.2 |
nwProtStatsMinVerThe minor version number of the protocol stack statistics table.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.3.1.3 |
nwProtStatsValidMaskA bit mask indicating which counters are used. The value 0 indicates Yes; the value 1 indicates No. The bit/counter correlations are determine by shifting left, as you move down the counters in the table.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.3.1.4 |
nwProtStatsTotalTxPktsThe total number of packets that were requested to be transmitted (whether they were actually transmitted or not).ro Counter .1.3.6.1.4.1.130.2.1.1.4.3.1.5 |
nwProtStatsTotalRxPktsThe total number of incoming packets that were received.ro Counter .1.3.6.1.4.1.130.2.1.1.4.3.1.6 |
nwProtStatsIgnoredRxPktsThe total number of incoming packets that were ignored by the stack.ro Counter .1.3.6.1.4.1.130.2.1.1.4.3.1.7 |
nwProtStatsCustomThe total number of custom counters following this field.ro Counter .1.3.6.1.4.1.130.2.1.1.4.3.1.8 |
nwProtCustomStatsTableThe table of custom statistics for the protocol. SEQUENCE OF NwProtCustomStatsEntry .1.3.6.1.4.1.130.2.1.1.4.4 |
nwProtCustomStatsEntryThe entry in table of custom statistics indexed by the protocol number and the index. NwProtCustomStatsEntry .1.3.6.1.4.1.130.2.1.1.4.4.1 |
nwProtCustomStatsProtNoA unique value for each protocol supported, used by SNMP to order the list.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.4.1.1 |
nwProtCustomStatsIndexA unique value for each statistic in the custom statistics table.ro INTEGER .1.3.6.1.4.1.130.2.1.1.4.4.1.2 |
nwProtCustomStatsDescrA string describing for the custom statistic.ro OCTET STRING .1.3.6.1.4.1.130.2.1.1.4.4.1.3 |
nwProtCustomStatsValueThe value of the custom statistic.ro Counter .1.3.6.1.4.1.130.2.1.1.4.4.1.4 |