UX-OBJECTS-MIB
The MIB module for net.com entities.
Main OID:
ux.1.3.6.1.4.1.177.15
116
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
116 total| Object Name |
|---|
net OBJECT IDENTIFIER .1.3.6.1.4.1.177 |
uxThe MIB module for net.com entities. MODULE-IDENTITY .1.3.6.1.4.1.177.15 |
uxObjects OBJECT IDENTIFIER .1.3.6.1.4.1.177.15.1 |
uxChassis OBJECT IDENTIFIER .1.3.6.1.4.1.177.15.1.1 |
chasiDescUX2000The description for the UX2000 chassis typerodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.1.1 |
chasiDescUX1000The description for the UX1000 chassis typerodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.1.2 |
chasiTypeThe chassis type for the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.1.3 |
uxAlarmCfgTableThis table gives the information about the alarms and events that this device is capable of generating. When a condition satisfying the alarms configured in this table occurs, an alarm is posted in uxActAlarmTable with associated information. SEQUENCE OF UxAlarmCfgEntry .1.3.6.1.4.1.177.15.1.2 |
uxAlarmCfgEntryAn entry in the alarm table UxAlarmCfgEntry .1.3.6.1.4.1.177.15.1.2.1 |
uxAlarmIndexIndex of this alarm/event in the config table. This will be the combination of uxAlarmID and uxAlarmSubID uxAlarmIndex =uxAlarmID *65536+ uxAlarmSubIDro INTEGER .1.3.6.1.4.1.177.15.1.2.1.1 |
uxAlarmIDEvent ID of this alarm/event.ro INTEGER .1.3.6.1.4.1.177.15.1.2.1.2 |
uxAlarmSubIDEvent SubID of this alarm/event.ro INTEGER .1.3.6.1.4.1.177.15.1.2.1.3 |
uxAlarmConditionAlarm/event name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.2.1.4 |
uxAlarmSeverityAlarm severity level. Eg: none warning minor major criticalro Enumeration .1.3.6.1.4.1.177.15.1.2.1.5 |
uxAlarmCategoryAlarm/event category number. As per Bell Core Standard GR-1248-COREro Enumeration .1.3.6.1.4.1.177.15.1.2.1.6 |
uxAlarmCancelTypeWhen an alarm is configured as auto-cancel(1), it clears from the UX active alarm table, when the condition causing it goes away. These alarms do not need explicit user intervention to cancel (clear) them. Non-auto-cancel(0) alarm requires user intervention to clear from the active alarm table. User needs to cancel (clear) it explicitly by setting the corresponding column object in the active alarm table.ro Enumeration .1.3.6.1.4.1.177.15.1.2.1.7 |
uxAlarmEvtTypeType of the evnt, whether it is an alarm or a normal eventro Enumeration .1.3.6.1.4.1.177.15.1.2.1.8 |
uxAlarmDecodeKeyDecode key that is used to interpret alarm/event instances when the alarms are posted to active alarm Table. The index attribute uxAlarmInstanceID is decoded based on the value of this attribute. Eg: Decode Key - shelf;card;port Possible decode keys are: shelf, shelf;card, shelf;interface;card;port, service, channel, username, IPAddress, etc.. AFFECTS: uxAlarmInstanceID This attribute affects uxAlarmInstanceID as explained in the example above.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.2.1.9 |
uxAlarmClrIDClearing event Event ID of this alarm. Applicable to the alarms for which the auto clear is setro INTEGER .1.3.6.1.4.1.177.15.1.2.1.10 |
uxAlarmClrSubIDClearing event Event sub ID of this alarm. Applicable to the alarms for which the auto clear is set.ro INTEGER .1.3.6.1.4.1.177.15.1.2.1.11 |
uxAlarmDescriptionAlarm description. Any info user wants to notero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.2.1.12 |
uxActAlarmTableActive Alarm table in the system SEQUENCE OF UxActAlarmEntry .1.3.6.1.4.1.177.15.1.3 |
uxActAlarmEntryAn entry in the active alarm table UxActAlarmEntry .1.3.6.1.4.1.177.15.1.3.1 |
uxAlarmActiveIndexIndex of Active alarm tablero INTEGER .1.3.6.1.4.1.177.15.1.3.1.1 |
uxAlarmConfigIndexIndex value of Alarm configuration numberro INTEGER .1.3.6.1.4.1.177.15.1.3.1.2 |
uxAlarmActiveIDEventID of the active alarmro INTEGER .1.3.6.1.4.1.177.15.1.3.1.3 |
uxAlarmActiveSubIDEventID of the active alarmro INTEGER .1.3.6.1.4.1.177.15.1.3.1.4 |
uxAlarmActiveConditionActive alarm/event name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.3.1.5 |
uxAlarmActiveSeverityAlarm severity level. Eg: none warning minor major criticalro Enumeration .1.3.6.1.4.1.177.15.1.3.1.6 |
uxAlarmActiveCategoryAlarm/event category number. As per Bell Core Standard GR-1248-COREro Enumeration .1.3.6.1.4.1.177.15.1.3.1.7 |
uxAlarmActiveCancelTypeWhen an alarm is configured as auto-cancel(1), it clears from the UX active alarm table, when the condition causing it goes away. These alarms do not need explicit user intervention to cancel (clear) them. Non-auto-cancel(0) alarm requires user intervention to clear from the active alarm table. User needs to cancel (clear) it explicitly by setting the corresponding column object in the active alarm table.ro Enumeration .1.3.6.1.4.1.177.15.1.3.1.8 |
uxAlarmActiveFirstOccurAlarm first occurrence Time displayed in milli sec.ro Counter64 .1.3.6.1.4.1.177.15.1.3.1.9 |
uxAlarmActiveLastOccurAlarm last occurrence Time displayed in milli sec.ro Counter64 .1.3.6.1.4.1.177.15.1.3.1.10 |
uxAlarmActiveCountNumber of times this alert occurred. This count is relevant only for non-auto-cancelling alerts.ro INTEGER .1.3.6.1.4.1.177.15.1.3.1.11 |
uxAlarmActiveDecodeKeyDecode key that is used to interpret alarm/event instances when the alarms are posted to active alarm Table. The index attribute uxAlarmInstanceID is decoded based on the value of this attribute. Eg: Decode Key - shelf;card;port Possible decode keys are: shelf, shelf;card, shelf;interface;card;port, service, channel, username, IPAddress, etc.. AFFECTS: uxAlarmInstanceID This attribute affects uxAlarmInstanceID as explained in the example above.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.3.1.12 |
uxAlarmActiveSourceInstanceInstance that has generated this alert. This is encoded as illustrated in the following example : decode key = shelf;card;port Source instance = 1;1;1 indicates that the alert is generated on shelf 1 card 1 and port 1 DEPENDS ON: uxAlarmDecodeKey Management station will use uxAlarmDecodeKey to decode this instance.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.3.1.13 |
uxAlarmActiveStateInforms if an active alarm is acknowledged/unacknowledged/cancelled.ro Enumeration .1.3.6.1.4.1.177.15.1.3.1.14 |
uxAlarmActiveClrEvtIDClearing event Event ID of this alarm. Applicable to the alarms for which the auto clear is setro INTEGER .1.3.6.1.4.1.177.15.1.3.1.15 |
uxAlarmActiveClrEvtSubIDClearing event Event sub ID of this alarm. Applicable to the alarms for which the auto clear is set.ro INTEGER .1.3.6.1.4.1.177.15.1.3.1.16 |
uxAlarmActiveDescriptionAlarm description. Any info user wants to notero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.3.1.17 |
uxAlarmActiveHighestSeverityAlarmHighest Severity Active alarmro INTEGER .1.3.6.1.4.1.177.15.1.3.1.18 |
uxAlarmActiveHardWareIDHardware ID of the nodero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.3.1.19 |
ipTelephony OBJECT IDENTIFIER .1.3.6.1.4.1.177.15.1.5 |
uxSystemUsageStatsIntervalTableThe System Usage Interval table contains various system usage statitics collected over the previous 4 hours.The past 4 hours are broken into 240 completed 1 minute intervals. Each row in this table represents one such interval . SEQUENCE OF UxSystemUsageIntervalEntry .1.3.6.1.4.1.177.15.1.5.9 |
uxSystemUsageIntervalEntryAn entry in the System Usage Interval table UxSystemUsageIntervalEntry .1.3.6.1.4.1.177.15.1.5.9.1 |
uxSystemUsageIntervalNumberA number between 1 and 240, where 1 is the most recently completed 1 minute interval and 240 is the 1 minute interval completed 239 minutes prior to interval 1.ro INTEGER .1.3.6.1.4.1.177.15.1.5.9.1.1 |
uxSystemUsageIntervalCPUUsageCPU Usage statistics for 1 minute interval.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.177.15.1.5.9.1.2 |
uxSystemUsageIntervalMemoryUsageMemory Usage statistics for 1 minute interval.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.177.15.1.5.9.1.3 |
uxDSPPeakUsageStatsIntervalTableThe DSP Usage Stats table contains various statistics being collected by DSP for the previous 24 hours. The past 24 hours are broken into 24 completed 1 hour intervals. Each row in this table represents one such interval. SEQUENCE OF UxDSPPeakUsageIntervalEntry .1.3.6.1.4.1.177.15.1.5.14 |
uxDSPPeakUsageIntervalEntryAn entry in the System Usage Current table UxDSPPeakUsageIntervalEntry .1.3.6.1.4.1.177.15.1.5.14.1 |
uxDSPPeakUsageIntervalIndexThe Index value which identifies the interval.ro INTEGER .1.3.6.1.4.1.177.15.1.5.14.1.1 |
uxDSPPeakIntervalUsagePeak DSP usage.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.177.15.1.5.14.1.2 |
uxDSPResourceTableThis table gives the information about the DSP resources in UX. SEQUENCE OF UxDSPResourceEntry .1.3.6.1.4.1.177.15.1.6 |
uxDSPResourceEntryAn entry in the DSP resource table UxDSPResourceEntry .1.3.6.1.4.1.177.15.1.6.1 |
uxDSPIndexDSP Resource table indexro INTEGER .1.3.6.1.4.1.177.15.1.6.1.1 |
uxDSPModTypeDSP module typero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.6.1.2 |
uxDSPIsPresentIf the DSP resource is present. This is because we list all the possible DSP resources through this table and this object specifies if the DSP resource is actually installed on UX.ro Enumeration .1.3.6.1.4.1.177.15.1.6.1.3 |
uxDSPCPUUsageDSP Resource usage in % rounded of to the next integer.ro INTEGER .1.3.6.1.4.1.177.15.1.6.1.4 |
uxDSPChannelsInUseNumber of channels in use by this DSPro INTEGER .1.3.6.1.4.1.177.15.1.6.1.5 |
uxDSPServiceStatusService state of the DSPro Enumeration .1.3.6.1.4.1.177.15.1.6.1.6 |
uxCodecsSupportedCodecs supported by this DSP, displayed as a '|' seperated stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.6.1.7 |
uxDSX0ConfigTableThe DS0 Configuration table. SEQUENCE OF UxDSX0ConfigEntry .1.3.6.1.4.1.177.15.1.7 |
uxDSX0ConfigEntryAn entry in the DS0 Configuration table. There is an entry in this table for each DS0 interface. UxDSX0ConfigEntry .1.3.6.1.4.1.177.15.1.7.1 |
uxDSX0TypeType of DS0ro Enumeration .1.3.6.1.4.1.177.15.1.7.1.1 |
uxDSX0SpeedSpeed of DS0ro INTEGER .1.3.6.1.4.1.177.15.1.7.1.2 |
uxDSX0LastchangeLast change of status on this DS0 in EPOCH secsro INTEGER .1.3.6.1.4.1.177.15.1.7.1.3 |
uxDSX0AdminStateAdmin state of this DS0ro Enumeration .1.3.6.1.4.1.177.15.1.7.1.4 |
uxModuleTableThis table gives the information about all the installed Modules in UX. SEQUENCE OF UxModuleEntry .1.3.6.1.4.1.177.15.1.8 |
uxModuleEntryAn entry in the Module table UxModuleEntry .1.3.6.1.4.1.177.15.1.8.1 |
uxModuleIndexIndex of the Module. It also represents the physical location of the card/module on the system. NOTE: For different UX Chassis, the index of modules/cards may differ.ro INTEGER .1.3.6.1.4.1.177.15.1.8.1.1 |
uxModuleTypeModule type indicating the physical module type. Integer values 7, 8, 9, 10, 15 - reserved for future modules.ro Enumeration .1.3.6.1.4.1.177.15.1.8.1.2 |
uxModulePartNumberModule part information Example: 404-40001ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.8.1.3 |
uxModuleVersionNumberModule version information Example: 001ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.8.1.4 |
uxModuleSerialNumberModule serial number information Example: A4000110040059ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.177.15.1.8.1.5 |
uxModuleMfgWeekModule manufacturing week number NOTE: This object is not applicable for uxModuleType of PowerSupply type. For PowerSupply Modules, 0 will be returned.ro INTEGER .1.3.6.1.4.1.177.15.1.8.1.6 |
uxModuleMfgYearModule manufacturing year number NOTE: This object is not applicable for uxModuleType of PowerSupply type. For PowerSupply Modules, 0 will be returned.ro INTEGER .1.3.6.1.4.1.177.15.1.8.1.7 |
uxPSUTableThis table provides health and runtime information on all Power Supplies on UX. This table returns all applicable power supply slots. NOTE: THIS MIB IS NOT SUPPORTED FOR UX1000 MODEL SEQUENCE OF UxPSUEntry .1.3.6.1.4.1.177.15.1.9 |
uxPSUEntryAn entry in the PSU table UxPSUEntry .1.3.6.1.4.1.177.15.1.9.1 |
uxPSUIndexIndex of the Power Supply. NOTE: UX2000: Index 1, is the left PSU Index 2, is the right PSUro INTEGER .1.3.6.1.4.1.177.15.1.9.1.1 |
uxPSUIsPresentProvides indication if the power supply is present on the device.ro Enumeration .1.3.6.1.4.1.177.15.1.9.1.2 |
uxPSUIsInputGoodProvides status of PSU Input health. This could be used to deduce the health state of the Power Supply as following: uxPSUIsPresent(1) and yes(1) - Power Supply is Up no(2) - Power Supply is Downro Enumeration .1.3.6.1.4.1.177.15.1.9.1.3 |
uxPSUInputTypeProvides the type of PSU Input i.e. AC or DCro Enumeration .1.3.6.1.4.1.177.15.1.9.1.4 |
uxPSUPowerInProvides Power (W) coming into the supplyro INTEGER .1.3.6.1.4.1.177.15.1.9.1.5 |
uxPSUPowerOutProvides Power (W) going out from the supplyro INTEGER .1.3.6.1.4.1.177.15.1.9.1.6 |
uxPSUVoltageInProvides Voltage coming into the supplyro INTEGER .1.3.6.1.4.1.177.15.1.9.1.7 |
uxPSUVoltageOutProvides Voltage going out from the supply This information is returned in 1000s of the unit valuero INTEGER .1.3.6.1.4.1.177.15.1.9.1.8 |
uxPSUCurrentInProvides Current (A) coming into the supply This information is returned in 1000s of the unit valuero INTEGER .1.3.6.1.4.1.177.15.1.9.1.9 |
uxPSUCurrentOutProvides Current (A) going out from the supply This information is returned in 1000s of the unit valuero INTEGER .1.3.6.1.4.1.177.15.1.9.1.10 |
uxPSUTemperatureProvides temperature (C) of the supplyro INTEGER .1.3.6.1.4.1.177.15.1.9.1.11 |
uxPSUFanSpeed1Provides speed (RPM) of the Fan 1 of the supplyro INTEGER .1.3.6.1.4.1.177.15.1.9.1.12 |
uxPSUFanSpeed2Provides speed (RPM) of the Fan 2 of the supplyro INTEGER .1.3.6.1.4.1.177.15.1.9.1.13 |
uxFanTableThis table gives the information about all the installed Fans on UX. NOTE: THIS MIB IS NOT SUPPORTED FOR UX1000 MODEL SEQUENCE OF UxFanEntry .1.3.6.1.4.1.177.15.1.10 |
uxFanEntryAn entry in the Fan table UxFanEntry .1.3.6.1.4.1.177.15.1.10.1 |
uxFanIndexIndex of the installed Fan.ro INTEGER .1.3.6.1.4.1.177.15.1.10.1.1 |
uxFanSpeedSpeed (RPM) of the Fan Note: Fan can be considered Down if the speed is 0ro INTEGER .1.3.6.1.4.1.177.15.1.10.1.2 |
uxCardTableThis table gives information about all the installed Cards on UX. NOTE: THIS MIB IS NOT SUPPORTED FOR UX1000 MODEL SEQUENCE OF UxCardEntry .1.3.6.1.4.1.177.15.1.11 |
uxCardEntryAn entry in the Card table UxCardEntry .1.3.6.1.4.1.177.15.1.11.1 |
uxCardIndexIndex of the installed Card.ro INTEGER .1.3.6.1.4.1.177.15.1.11.1.1 |
uxCardTypeCard type indicating the physical card type. Integer values 5 to 16 do not indicate a physical card type.ro Enumeration .1.3.6.1.4.1.177.15.1.11.1.2 |
uxCardServiceStatusOperational status of the installed card. Note: This attribute is not applicable for cards/modules on UX1000 hardware.ro Enumeration .1.3.6.1.4.1.177.15.1.11.1.3 |
uxSystem OBJECT IDENTIFIER .1.3.6.1.4.1.177.15.1.12 |
uxSystemHighestSeverityAlarmProvides highest severity of all active alarms in the system.ro Enumeration .1.3.6.1.4.1.177.15.1.12.1 |
uxSystemCoreSwitchTempProvides core switch temperature (C).ro INTEGER .1.3.6.1.4.1.177.15.1.12.2 |
uxSystemCurrentCPUUsageProvides CPU Usage statistics for the current interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.177.15.1.12.3 |
uxSystemCurrentMemoryUsageProvides Memory Usage statistics for the current interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.177.15.1.12.4 |
uxLicenseCurrentPeakSIPCallPeak value of used SIP call licenses for the current 1 hour interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.177.15.1.12.5 |
uxLicenseCurrentPeakSIPRegistrationPeak value of used SIP Registrations licenses for the current interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.177.15.1.12.6 |
uxDSPPeakCurrentUsagePeak DSP usage for the current 1 hour interval.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.177.15.1.12.7 |
uxLicenseCurrentPeakTDMChannelPeak value of used TDM channel licenses.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.177.15.1.12.8 |
uxLicenseCurrentPeakDSPPeak value of used DSP licenses.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.177.15.1.12.9 |
uxUserStatsPeakSessionsCurrentInervalProvides peak number of user sessions in the current interval.ro INTEGER .1.3.6.1.4.1.177.15.1.12.10 |
uxUserStatsIntervalTableProvides peak number of user sessions for the specified interval. SEQUENCE OF UxUserStatsIntervalEntry .1.3.6.1.4.1.177.15.1.12.11 |
uxUserStatsIntervalEntryAn entry in the user statistics interval table. UxUserStatsIntervalEntry .1.3.6.1.4.1.177.15.1.12.11.1 |
uxUserStatsIntervalNumberA number between 1 and 24, where 1 is the most recently completed 1 hour interval and 24 is the 1 hour interval completed 23 hours and 45 minutes prior to interval 1.ro INTEGER .1.3.6.1.4.1.177.15.1.12.11.1.1 |
uxUserStatsPeakSessionsPeak user sessions during the requested interval.ro INTEGER .1.3.6.1.4.1.177.15.1.12.11.1.2 |
uxTraps OBJECT IDENTIFIER .1.3.6.1.4.1.177.15.2 |