DS0-MIB
The MIB module to describe DS0 interfaces objects.
Main OID:
ds0.1.3.6.1.2.1.10.81
19
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
ds0The MIB module to describe DS0 interfaces objects. MODULE-IDENTITY .1.3.6.1.2.1.10.81 |
dsx0ConfigTableThe DS0 Configuration table. SEQUENCE OF Dsx0ConfigEntry .1.3.6.1.2.1.10.81.1 |
dsx0ConfigEntryAn entry in the DS0 Configuration table. There is an entry in this table for each DS0 interface. Dsx0ConfigEntry .1.3.6.1.2.1.10.81.1.1 |
dsx0Ds0ChannelNumberThis object indicates the channel number of the ds0 on its DS1/E1.ro INTEGER .1.3.6.1.2.1.10.81.1.1.1 |
dsx0RobbedBitSignallingThis object indicates if Robbed Bit Signalling is turned on or off for a given ds0. This only applies to DS0s on a DS1 link. For E1 links the value is always off (false).rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.81.1.1.2 |
dsx0CircuitIdentifierThis object contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.rw DisplayString .1.3.6.1.2.1.10.81.1.1.3 |
dsx0IdleCodeThis object contains the code transmitted in the ABCD bits when the ds0 is not connected and dsx0TransmitCodesEnable is enabled. The object is a bitmap and the various bit positions are: 1 D bit 2 C bit 4 B bit 8 A bitrw INTEGER .1.3.6.1.2.1.10.81.1.1.4 |
dsx0SeizedCodeThis object contains the code transmitted in the ABCD bits when the ds0 is connected and dsx0TransmitCodesEnable is enabled. The object is a bitmap and the various bit positions are: 1 D bit 2 C bit 4 B bit 8 A bitrw INTEGER .1.3.6.1.2.1.10.81.1.1.5 |
dsx0ReceivedCodeThis object contains the code being received in the ABCD bits. The object is a bitmap and the various bit positions are: 1 D bit 2 C bit 4 B bit 8 A bitro INTEGER .1.3.6.1.2.1.10.81.1.1.6 |
dsx0TransmitCodesEnableThis object determines if the idle and seized codes are transmitted. If the value of this object is true then the codes are transmitted.rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.10.81.1.1.7 |
dsx0Ds0BundleMappedIfIndexThis object indicates the ifIndex value assigned by the agent for the ds0Bundle(82) ifEntry to which the given ds0(81) ifEntry may belong. If the given ds0(81) ifEntry does not belong to any ds0Bundle(82) ifEntry, then this object has a value of zero. While this object provides information that can also be found in the ifStackTable, it provides this same information with a single table lookup, rather than by walking the ifStackTable to find the possibly non-existent ds0Bundle(82) ifEntry that may be stacked above the given ds0(81) ifTable entry.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.2.1.10.81.1.1.8 |
ds0Conformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.81.2 |
ds0Groups OBJECT IDENTIFIER .1.3.6.1.2.1.10.81.2.1 |
ds0ConfigGroupA collection of objects providing configuration information applicable to all DS0 interfaces. Unknown .1.3.6.1.2.1.10.81.2.1.1 |
ds0Compliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.81.2.2 |
ds0ComplianceThe compliance statement for DS0 interfaces. Unknown .1.3.6.1.2.1.10.81.2.2.1 |
dsx0ChanMappingTableThe DS0 Channel Mapping table. This table maps a DS0 channel number on a particular DS1/E1 into an ifIndex. SEQUENCE OF Dsx0ChanMappingEntry .1.3.6.1.2.1.10.81.3 |
dsx0ChanMappingEntryAn entry in the DS0 Channel Mapping table. There is an entry in this table corresponding to each ds0 ifEntry within any interface that is channelized to the individual ds0 ifEntry level. This table is intended to facilitate mapping from channelized interface / channel number to DS0 ifEntry. (e.g. mapping (DS1 ifIndex, DS0 Channel Number) -> ifIndex) While this table provides information that can also be found in the ifStackTable and dsx0ConfigTable, it provides this same information with a single table lookup, rather than by walking the ifStackTable to find the various constituent ds0 ifTable entries, and testing various dsx0ConfigTable entries to check for the entry with the applicable DS0 channel number. Dsx0ChanMappingEntry .1.3.6.1.2.1.10.81.3.1 |
dsx0ChanMappedIfIndexThis object indicates the ifIndex value assigned by the agent for the individual ds0 ifEntry that corresponds to the given DS0 channel number (specified by the INDEX element dsx0Ds0ChannelNumber) of the given channelized interface (specified by INDEX element ifIndex).ro InterfaceIndex (IF-MIB) .1.3.6.1.2.1.10.81.3.1.1 |