UBQS-SYSLOG-MIB
The UBQS-SYSLOG-MIB enables monitoring of syslog event generation and transmission states on Ubiquiti Networks (UBNT) UniFi Switches and related infrastructure. It provides access to counters and status indicators for system log messages, allowing administrators to track event volume and verify the operational health of the logging subsystem.
Imported Objects
Objects
24 total| Object Name |
|---|
ubiSyslogMIBThe UBQS-SYSLOG-MIB is used to get
the syslog information. MODULE-IDENTITY .1.3.6.1.4.1.7800.100.15 |
IMPORTSThe UBQS-SYSLOG-MIB is used to get
the syslog information. Unknown .1.3.6.1.4.1.7800.100.15 |
ubiSyslogMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.15.0 |
ubiSyslogMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.15.1 |
ubiSyslogConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.15.1.1 |
ubiSyslogConsoleEnableIndicates whether the system writes the syslog
at colsole.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.15.1.1.1 |
ubiSyslogConsoleSeverityIndicates which syslog severity levels will be processed.
0 'none
1 'emergency' : system is unusable
2 'alert' : action must be taken immediately
3 'critical' : critical conditions
4 'error' : error conditions
5 'warning' : warning conditions
6 'notice' : normal but significant condition
7 'informational': informational messages
8 'debug' : debug-level messages.rw UbiSyslogSeverity .1.3.6.1.4.1.7800.100.15.1.1.2 |
ubiSyslogTerminalEnableIndicates whether the system writes the syslog
at terminal.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.15.1.1.3 |
ubiSyslogTerminalSeverityIndicates which syslog severity levels will be processed.
0 'none
1 'emergency' : system is unusable
2 'alert' : action must be taken immediately
3 'critical' : critical conditions
4 'error' : error conditions
5 'warning' : warning conditions
6 'notice' : normal but significant condition
7 'informational': informational messages
8 'debug' : debug-level messages.rw UbiSyslogSeverity .1.3.6.1.4.1.7800.100.15.1.1.4 |
ubiSyslogBufferdEnableIndicates whether the system writes the syslog
at buffer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.15.1.1.5 |
ubiSyslogBuffredSeverityIndicates which syslog severity levels will be processed.
0 'none
1 'emergency' : system is unusable
2 'alert' : action must be taken immediately
3 'critical' : critical conditions
4 'error' : error conditions
5 'warning' : warning conditions
6 'notice' : normal but significant condition
7 'informational': informational messages
8 'debug' : debug-level messages.rw UbiSyslogSeverity .1.3.6.1.4.1.7800.100.15.1.1.6 |
ubiSyslogTrapEnableIndicates whether the system writes the syslog
for trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.15.1.1.7 |
ubiSyslogTrapSeverityIndicates which syslog severity levels will be processed.
0 'none
1 'emergency' : system is unusable
2 'alert' : action must be taken immediately
3 'critical' : critical conditions
4 'error' : error conditions
5 'warning' : warning conditions
6 'notice' : normal but significant condition
7 'informational': informational messages
8 'debug' : debug-level messages.rw UbiSyslogSeverity .1.3.6.1.4.1.7800.100.15.1.1.8 |
ubiSyslogBufferSizeSpecifies the syslog buffer size.rw Integer32 .1.3.6.1.4.1.7800.100.15.1.1.9 |
ubiSyslogFacilityIndicates the syslog facility.rw Enumeration .1.3.6.1.4.1.7800.100.15.1.1.10 |
ubiSyslogServers OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.15.1.2 |
ubiSyslogServerTableThis table contains entries that allow application
to configure syslog servers for the system. SEQUENCE OF UbiSyslogServerEntry .1.3.6.1.4.1.7800.100.15.1.2.1 |
ubiSyslogServerEntryAn entry containing information about syslog servers
configured for the system. UbiSyslogServerEntry .1.3.6.1.4.1.7800.100.15.1.2.1.1 |
ubiSyslogServerAddrTypeThe type of server address.
ipv4(1) An IPv4 address as defined by the
InetAddressIPv4 textual convention.
ipv6(2) An IPv6 address as defined by the
InetAddressIPv6 textual convention. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7800.100.15.1.2.1.1.1 |
ubiSyslogServerAddrThe address of this syslog server.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7800.100.15.1.2.1.1.2 |
ubiSyslogServerRowStatusThe row status of this syslog server.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.15.1.2.1.1.3 |
ubiSyslogMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.15.2 |
ubiSyslogMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.15.2.1 |
ubiSyslogMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.15.2.2 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.