UBQS-SLD-MIB
The UBQS-SLD-MIB provides SNMP access to monitor self-loop detection (SLD) status and diagnostic counters on Ubiquiti Networks (UBNT) switches. This module enables administrators to verify physical layer connectivity integrity by retrieving specific loop detection states and event logs for active network ports.
Imported Objects
Objects
26 total| Object Name |
|---|
ubiSldMIBThe UBQS-SLD-MIB is used for getting
the information about self loop detect(SLD). MODULE-IDENTITY .1.3.6.1.4.1.7800.100.25 |
ubiSldMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.25.0 |
ubiSelfLoopDetectStateChangeWhen SLD status is changed, this notification is occured. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.25.0.1 |
ubiSldMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.25.1 |
ubiSldGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.25.1.1 |
ubiSldEnabledIt is enable function of SLD.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.25.1.1.1 |
ubiSldHelloIntervalGlobal SLD hello interval.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.7800.100.25.1.1.2 |
ubiSldRecoveryTimeGlobal SLD Recovery time.rw Integer32 { disable(0) } UNITS "minutes" .1.3.6.1.4.1.7800.100.25.1.1.3 |
ubiSldNotifyOnlyEnbaledIt is enable Global function of
only notification without SLD.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.25.1.1.4 |
ubiSldPortCheckEnabledIt is enable global configuration of
SLD without checking port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.25.1.1.5 |
ubiSldIfStateChangeEnabledIt is enable to sending SLD SNMP trap messagerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.25.1.1.6 |
ubiSldIfTable SEQUENCE OF UbiSldIfEntry .1.3.6.1.4.1.7800.100.25.1.2 |
ubiSldIfEntry UbiSldIfEntry .1.3.6.1.4.1.7800.100.25.1.2.1 |
ubiSldIfEnabledIt is enable to transmit SLD hello PDU in interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.25.1.2.1.1 |
ubiSldIfHelloIntervalIt is changed SLD hello interval.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.7800.100.25.1.2.1.2 |
ubiSldIfRecoveryTimeWhen it is configured, if interface is disabled by SLD,
interface automatically recover after recovery time.rw Integer32 { disable(0) } UNITS "minutes" .1.3.6.1.4.1.7800.100.25.1.2.1.3 |
ubiSldIfNotifyOnlyEnabledWhen it is configured, if self-loop is detected,
only notification is occured without disable interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.25.1.2.1.4 |
ubiSldIfPortCheckEnabledWhen it is enabled, if it receive SLD hello PDU
of anothor interface, it regards SLD.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.25.1.2.1.5 |
ubiSldIfStateCurrent interface status
enable(1) : interface is active
errDisable(2) : interface is disable by SLD.ro Enumeration .1.3.6.1.4.1.7800.100.25.1.2.1.6 |
ubiSldIfRecoveryMethodLast Recorvery status
none(1) : none
autoRecovery(2) : Auto recovery
manualRecovery(3): Manual recoeryro Enumeration .1.3.6.1.4.1.7800.100.25.1.2.1.7 |
ubiSldIfLastStateChangeTimeLast time of changing interface status by SLD.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.7800.100.25.1.2.1.8 |
ubiSldIfErrorDisabledCountThe number of occurence self-loop detection.ro Integer32 .1.3.6.1.4.1.7800.100.25.1.2.1.9 |
ubiSldIfStateResetIt manually clear interface status by SLD.
none(0) : Do nothing
reset(1) : Clear interface.rw Enumeration .1.3.6.1.4.1.7800.100.25.1.2.1.10 |
ubiSldMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.25.2 |
ubiSldMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.25.2.1 |
ubiSldMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.25.2.2 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.