UBQS-NTP-MIB
The UBQS-NTP-MIB module enables monitoring of Network Time Protocol (NTP) synchronization status, stratum levels, and peer associations on Ubiquiti EdgeRouter and UniFi Switch devices. It provides visibility into time source reachability, clock drift, and NTP service operational states to ensure accurate system timekeeping across the network infrastructure.
Imported Objects
Objects
18 total| Object Name |
|---|
ubiNtpMIBThe UBQS-NTP-MIB is used to get
the ntp information. MODULE-IDENTITY .1.3.6.1.4.1.7800.100.17 |
RFC1155-SMIThe UBQS-NTP-MIB is used to get
the ntp information. Unknown .1.3.6.1.4.1.7800.100.17 |
ubiNtpMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.17.0 |
ubiNtpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.17.1 |
ubiNtpSystem OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.17.1.1 |
ubiNtpCurrentStratumcurrent NTP stratumro Integer32 .1.3.6.1.4.1.7800.100.17.1.1.1 |
ubiNtpIntervalNTP client mode polling interval (default 64seconds)ro Integer32 .1.3.6.1.4.1.7800.100.17.1.1.2 |
ubiNtpMaster OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.17.1.1.4 |
ubiNtpMasterEnableFlag that enable NTP master moderw Enumeration .1.3.6.1.4.1.7800.100.17.1.1.4.1 |
ubiNtpMasterStratumTo configure NTP stratumrw Integer32 .1.3.6.1.4.1.7800.100.17.1.1.4.2 |
ubiNtpServerTableTime Server Table SEQUENCE OF UbiNtpServerEntry .1.3.6.1.4.1.7800.100.17.1.2 |
ubiNtpServerEntryTime server entry UbiNtpServerEntry .1.3.6.1.4.1.7800.100.17.1.2.1 |
ubiNtpServerAddrTypeIP address type of the time serverro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7800.100.17.1.2.1.1 |
ubiNtpServerAddrIP address of time serverro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7800.100.17.1.2.1.2 |
ubiNtpServerRowStatusNTP time server rowstatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.17.1.2.1.3 |
ubiNtpMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.17.2 |
ubiNtpMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.17.2.1 |
ubiNtpMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.17.2.2 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.