UBQS-MPLS-LDP-MIB
Standard SNMP MIB module defining data structures for UBQS-MPLS-LDP-MIB.
Imported Objects
Objects
20 total| Object Name |
|---|
ubiLdpMIB MODULE-IDENTITY .1.3.6.1.4.1.7800.100.24.3 |
ubiLdpMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.24.3.0 |
ubiLdpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.24.3.1 |
ubiLdpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.24.3.1.1 |
ubiLdpEnableSet the global attribute of LDP whether the LDP performs the operations. If this attribute is not set, then the LDP does not send any kinds of packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.24.3.1.1.1 |
ubiLdpRouterIdThis entry set the router-id to the supplied IP address. The router uses this address to generate the LDP-ID. If you does not set this feild and the ubiLdpEnable attribute is enabled, then LDP Module automatically generate the LDP-ID. The algorithm for making ID is not covered in this description. please refer to RFC 5036 2.2.2. LDP Identifiers.rw IpAddress .1.3.6.1.4.1.7800.100.24.3.1.1.2 |
ubiLdpFailoverCfmEnableset the attribute of Connectivity Fault Management(CFM) in LDP. If you set this field, LDP creates the socket (AF_CFM) to detect whether the link associated with the peer is UP or DOWN. After set this attribute, You MUST enable the property for CFM in the interface which you want to check the connectivity.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.24.3.1.1.3 |
ubiLdpTargetedPeerHelloReceiptEnableEnable whether LDP accepts the packets from the targeted peer and cerate the instance for peer. If you want to configure the targeted-peer in network, then MUST enable this field at first.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.24.3.1.1.4 |
ubiLdpAcUpSignalEnableEnable the field to notify the interface of binded vpls to the neighbors for VPLS. If this is reset, then does not quickly send the signal to neighbors.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.24.3.1.1.5 |
ubiLdpExceedInitSessionNotiEnablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.24.3.1.1.6 |
ubiLdpPathVectorLimitMismatchNotiEnablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.24.3.1.1.7 |
ubiLdpLdpSessionUpDownNotiEnablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.24.3.1.1.8 |
ubiLdpInterfaceTableThis table specifies the LDP information for each interface. SEQUENCE OF UbiLdpInterfaceEntry .1.3.6.1.4.1.7800.100.24.3.1.2 |
ubiLdpInterfaceEntryA row in this table represents an LDP enable/disable status for each interface. UbiLdpInterfaceEntry .1.3.6.1.4.1.7800.100.24.3.1.2.1 |
ubiLdpIfEnableIf this object is set to ipv4, ipv6, or both, then it is possible to transmit Hello packet through a specified interface. And LDP adjacencies and session can be created.rw Enumeration .1.3.6.1.4.1.7800.100.24.3.1.2.1.1 |
ubiLdpMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.24.3.2 |
ubiLdpMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.24.3.2.1 |
ubiLdpMIBComplianceThe compliance statement for entities which implement the UBQS-MPLS-LDP-MIB Unknown .1.3.6.1.4.1.7800.100.24.3.2.1.1 |
ubiLdpMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.24.3.2.2 |
ubiLdpMIBGroupA collection of objects containing information about the LDP information. Unknown .1.3.6.1.4.1.7800.100.24.3.2.2.1 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.