UBQS-MISC-MIB
The UBQS-MISC-MIB module provides access to generic system-level attributes and non-standardized operational data for Ubiquiti UniFi Switches (UBQS), serving as a fallback for retrieving miscellaneous device information not covered by standard MIBs.
Imported Objects
Objects
16 total| Object Name |
|---|
ubiMiscMIBThe UBQS-MISC-MIB is used to get
the miscellaneous information of system. MODULE-IDENTITY .1.3.6.1.4.1.7800.100.22 |
IMPORTSThe UBQS-MISC-MIB is used to get
the miscellaneous information of system. Unknown .1.3.6.1.4.1.7800.100.22 |
ubiMiscMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.22.0 |
ubiMiscMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.22.1 |
ubiMiscRemoteReset OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.22.1.1 |
ubiMiscRemoteResetEnabledActivate/de-activate function of remote-reloadrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.22.1.1.1 |
ubiMiscPortRemoteResetTableThis table contains objects which provide the
information about the remote reset of port. SEQUENCE OF UbiMiscPortRemoteResetEntry .1.3.6.1.4.1.7800.100.22.1.1.2 |
ubiMiscPortRemoteResetEntryA entry containing information about
remote reset of port UbiMiscPortRemoteResetEntry .1.3.6.1.4.1.7800.100.22.1.1.2.1 |
ubiMiscPortRemoteResetReload(reset) remote device.rw Enumeration .1.3.6.1.4.1.7800.100.22.1.1.2.1.1 |
ubiMacSpoofing OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.22.1.2 |
ubiMacSpoofingEnabledIt activate/de-activate function of Mac-Spoofingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.22.1.2.1 |
ubiMiscStoreHistory OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.22.1.3 |
ubiMiscStoreHistoryEnabledIt activates/de-activates function of storing command history.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.22.1.3.1 |
ubiMiscMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.22.2 |
ubiMiscMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.22.2.1 |
ubiMiscMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.22.2.2 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.