UBQS-ENVMON-MIB
AI MIB Summary
The UBQS-ENVMON-MIB module enables SNMP-based retrieval of critical environmental telemetry, including temperature, voltage, and fan status, for Ubiquiti Networks (UBNT) QTS (UBQS) hardware platforms. This module facilitates real-time hardware health monitoring and thermal management by exposing sensor data points required for proactive infrastructure maintenance.
The UBQS-ENVMON-MIB is used for getting the environment information of the system.
Main OID:
ubiEnvMonMIB.1.3.6.1.4.1.7800.100.2
41
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
41 total| Object Name |
|---|
ubiEnvMonMIBThe UBQS-ENVMON-MIB is used for getting
the environment information of the system. MODULE-IDENTITY .1.3.6.1.4.1.7800.100.2 |
ubiEnvMonObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.2.1 |
ubiEnvMonTemperatureTableThe table of ambient temperature status maintained by the
environmental monitor. SEQUENCE OF UbiEnvMonTemperatureEntry .1.3.6.1.4.1.7800.100.2.1.1 |
ubiEnvMonTemperatureEntryAn entry in the ambient temperature status table, representing
the status of the associated testpoint maintained by the
environmental monitor. UbiEnvMonTemperatureEntry .1.3.6.1.4.1.7800.100.2.1.1.1 |
ubiEnvMonTemperatureIndexUnique index for the testpoint being instrumented.
This index is for SNMP purposes only, and has no
intrinsic meaning. Integer32 .1.3.6.1.4.1.7800.100.2.1.1.1.1 |
ubiEnvMonTemperatureDescrTextual description of the testpoint
being instrumented.ro DisplayString .1.3.6.1.4.1.7800.100.2.1.1.1.2 |
ubiEnvMonTemperatureValueThe current measurement of the testpoint
being instrumented.ro Gauge32 UNITS "degrees Celsius" .1.3.6.1.4.1.7800.100.2.1.1.1.3 |
ubiEnvMonTemperatureHighThresholdA high threshold for the temperature.
If a particular value isn't set, this object
displays the default value.rw Integer32 UNITS "degrees Celsius" .1.3.6.1.4.1.7800.100.2.1.1.1.4 |
ubiEnvMonTemperatureLowThresholdA low threshold for the temperature.
If a particular value isn't set, this object
displays the default value.rw Integer32 UNITS "degrees Celsius" .1.3.6.1.4.1.7800.100.2.1.1.1.5 |
ubiEnvMonTemperatureStateThe current state of the testpoint being instrumented.
Represents the temperature state of a device being monitored.
Valid values are:
normal(1): the environment is good, such as low
temperature.
warning(2): the environment is bad, such as temperature
above normal operation range but not too
high.
critical(3): the environment is very bad, such as
temperature much higher than normal
operation limit.
notPresent(5): the environmental monitor is not present,
such as temperature sensors do not exist.ro UbiEnvMonState .1.3.6.1.4.1.7800.100.2.1.1.1.6 |
ubiEnvMonFanTableThe table of fan status maintained by the environmental
monitor. SEQUENCE OF UbiEnvMonFanEntry .1.3.6.1.4.1.7800.100.2.1.2 |
ubiEnvMonFanEntryAn entry in the fan status table, representing the status of
the associated fan maintained by the environmental monitor. UbiEnvMonFanEntry .1.3.6.1.4.1.7800.100.2.1.2.1 |
ubiEnvMonFanIndexUnique index for the fan being instrumented.
This index is for SNMP purposes only, and has no
intrinsic meaning. Integer32 .1.3.6.1.4.1.7800.100.2.1.2.1.1 |
ubiEnvMonFanDescrTextual description of the fan being instrumented.ro DisplayString .1.3.6.1.4.1.7800.100.2.1.2.1.2 |
ubiEnvMonFanStateThe current state of the fan being instrumented.
Represents the fan state of a device being monitored.
Valid values are:
normal(1): the environment is good, such as low
temperature.
notPresent(5): the environmental monitor is not present,
such as temperature sensors do not exist.
notFunctioning(6): the environmental monitor does not
function properly.ro UbiEnvMonState .1.3.6.1.4.1.7800.100.2.1.2.1.3 |
ubiEnvMonSupplyTableThe table of power supply status maintained by the
environmental monitor card. SEQUENCE OF UbiEnvMonSupplyEntry .1.3.6.1.4.1.7800.100.2.1.3 |
ubiEnvMonSupplyEntryAn entry in the power supply status table, representing the
status of the associated power supply maintained by the
environmental monitor card. UbiEnvMonSupplyEntry .1.3.6.1.4.1.7800.100.2.1.3.1 |
ubiEnvMonSupplyIndexUnique index for the power supply being instrumented.
This index is for SNMP purposes only, and has no
intrinsic meaning. Integer32 .1.3.6.1.4.1.7800.100.2.1.3.1.1 |
ubiEnvMonSupplyDescrTextual description of the power supply
being instrumented.ro DisplayString .1.3.6.1.4.1.7800.100.2.1.3.1.2 |
ubiEnvMonSupplyStateThe current state of the power supply
being instrumented.
Represents the power state of a device being monitored.
Valid values are:
normal(1): the environment is good, such as low
temperature.
notPresent(5): the environmental monitor is not present,
such as temperature sensors do not exist.
notFunctioning(6): the environmental monitor does not
function properly.ro UbiEnvMonState .1.3.6.1.4.1.7800.100.2.1.3.1.3 |
ubiEnvMonSupplySourceThe power supply source.
ac - AC power supply
dc - DC power supplyro Enumeration .1.3.6.1.4.1.7800.100.2.1.3.1.4 |
ubiEnvMonExternalAlarmAcThe power supply convertor AC.
nomal (1)
fail (2)ro Enumeration .1.3.6.1.4.1.7800.100.2.1.3.1.5 |
ubiEnvMonExternalAlarmUnitThe power supply convertor unit.
nomal (1)
fail (2)ro Enumeration .1.3.6.1.4.1.7800.100.2.1.3.1.6 |
ubiEnvMonSupplyChannelTableThe table represents the extension status
for DC power supply. SEQUENCE OF UbiEnvMonSupplyChannelEntry .1.3.6.1.4.1.7800.100.2.1.4 |
ubiEnvMonSupplyChannelEntryAn entry in this table, representing the extended status of
the associated DC power supply maintained by
the environmental monitor card. UbiEnvMonSupplyChannelEntry .1.3.6.1.4.1.7800.100.2.1.4.1 |
ubiEnvMonSupplyChannelTypeUnique index for the DC power supply channel.ro Enumeration .1.3.6.1.4.1.7800.100.2.1.4.1.1 |
ubiEnvMonSupplyChannelStateThe current state of the DC power supply channel
being instrumented.
Represents the power state of a device being monitored.
Valid values are:
normal(1): the environment is good, such as low
temperature.
notPresent(5): the environmental monitor is not present,
such as temperature sensors do not exist.
notFunctioning(6): the environmental monitor does not
function properly.ro UbiEnvMonState .1.3.6.1.4.1.7800.100.2.1.4.1.2 |
ubiEnvMonMIBNotificationEnables OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.2.2 |
ubiEnvMonEnableTempStatusChangeThis variable indicates whether the system
produces the ubiEnvMonTempStatusChangeNotif.
A false value prevents temperature notifications
from being sent by this entity.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.2.2.1 |
ubiEnvMonEnableFanStatusChangeThis variable indicates whether the system
produces the ubiEnvMonFanStatusChangeNotif.
A false value prevents fan notifications
from being sent by this entity.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.2.2.2 |
ubiEnvMonEnableSupplyStatusChangeThis variable indicates whether the system
produces the ubiEnvMonSuppStatusChangeNotif.
A false value prevents redundant supply notifications
from being generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.2.2.3 |
ubiEnvMonEnableSupplyChannelStatusChangeThis variable indicates whether the system
produces the ubiEnvMonSuppExtStatusChangeNotif.
A false value prevents redundant supply notifications
from being generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.2.2.4 |
ubiEnvMonMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.2.3 |
ubiEnvMonMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.2.3.0 |
ubiEnvMonTempStatusChangeA ubiEnvMonTempStatusChangeNotif is sent if there
is change in the state of a device being monitored
by ubiEnvMonTemperatureState. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.2.3.0.1 |
ubiEnvMonFanStatusChangeA ubiEnvMonFanStatusChangeNotif is sent if there
is change in the state of a device being monitored
by ubiEnvMonFanState. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.2.3.0.2 |
ubiEnvMonSupplyStatusChangeA ubiEnvMonSupplyStatChangeNotif is sent if there
is change in the state of a device being monitored
by ubiEnvMonSupplyState. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.2.3.0.3 |
ubiEnvMonSupplyChannelStatusChangeA ubiEnvMonSuppExtStatusChangeNotif is sent if there
is change in the state of a device being monitored
by ubiEnvMonSupplyExtChannelStatus. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.2.3.0.4 |
ubiEnvMonMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.2.4 |
ubiEnvMonMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.2.4.1 |
ubiEnvMonMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.2.4.2 |