UBQS-ENTITY-ALARM-MIB
The UBQS-ENTITY-ALARM-MIB enables monitoring and configuration of environmental alarm states, such as temperature, humidity, and power supply faults, within Ubiquiti Networks (UBQS) hardware via SNMP. This module facilitates the retrieval of critical sensor status and the application of alarm thresholds to ensure operational continuity of the device's physical environment.
Imported Objects
Objects
20 total| Object Name |
|---|
ubiEntityAlarmMIBThe UBQS-ENTITY-ALARM-MIB is used to monitor
and configure status of alarms for Environment Monitor. MODULE-IDENTITY .1.3.6.1.4.1.7800.100.28 |
ubiEntityAlarmMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.28.0 |
ubiEntityAlarmMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.28.0.0 |
ubiAlarmAssertedThe agent generates this trap
when a physical entity asserts an alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.28.0.0.1 |
ubiAlarmClearedThe agent generates this trap
when a physical entity clears a previously asserted alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.28.0.0.2 |
ubiEntityAlarmMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.28.1 |
ubiAlarmContactTableThis table contains one row per specific alarm. SEQUENCE OF UbiAlarmContactEntry .1.3.6.1.4.1.7800.100.28.1.1 |
ubiAlarmContactEntryInformation about a specific alarm.
each index corresponds to each alarm contact
and index '0' means whole alarm contacts. UbiAlarmContactEntry .1.3.6.1.4.1.7800.100.28.1.1.1 |
ubiAlarmContactIndexThis object uniquely identifies an alarm description.ro Integer32 .1.3.6.1.4.1.7800.100.28.1.1.1.1 |
ubiAlarmContactDescrThis object specifies a human-readable message
describing the specific alarm.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.28.1.1.1.2 |
ubiAlarmContactSeverityThis object specifies the severity
associated with the specific alarm.
Valid values are :
critical(1) severity in critical
major(2) severity in major
minor(3) severity in minorrw AlarmSeverity .1.3.6.1.4.1.7800.100.28.1.1.1.3 |
ubiAlarmContactTriggerThis object specifies the trigger state
associated with the specific alarm.rw Enumeration .1.3.6.1.4.1.7800.100.28.1.1.1.4 |
ubiAlarmContactLastAlarmStatusThis object specifies the last alarm status
associated with the specific alarm.ro Enumeration .1.3.6.1.4.1.7800.100.28.1.1.1.5 |
ubiAlarmContactLastAlarmStampThis object specifies the system clock
at the time the alarm was generated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.28.1.1.1.6 |
ubiEntityAlarmNotificationEnables OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.28.1.2 |
ubiAlarmAssertedEnabledThis variable indicates whether the system
produces the following notifications:
ubiEntityFRUInserted, ubiEntityFRURemoved.
A false value will prevent these notifications
from being generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.28.1.2.1 |
ubiAlarmClearedEnabledThis variable indicates whether the system
produces the following notification:
ubiEntSensorThreshold.
A false value will prevent these notifications
from being generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.28.1.2.2 |
ubiEntityAlarmMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.28.2 |
ubiEntityAlarmMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.28.2.1 |
ubiEntityAlarmMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.28.2.2 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.