UBQS-CFM-MIB
AI MIB Summary
The UBQS-CFM-MIB module enables monitoring and management of IEEE 802.1ag Connectivity Fault Management (CFM) state machines, Continuity Check (CC) message counters, and Maintenance Association (MA) endpoints on Ubiquiti Networks devices. It facilitates the tracking of link integrity, fault detection events, and maintenance domain hierarchy status to ensure Layer 2 service continuity.
Connectivity Fault Management module for managing IEEE 802.1ag
Main OID:
ubiCFMMIB.1.3.6.1.4.1.7800.100.10
139
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
139 total| Object Name |
|---|
ubiCFMMIBConnectivity Fault Management module for managing IEEE 802.1ag MODULE-IDENTITY .1.3.6.1.4.1.7800.100.10 |
ubiCFMMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.0 |
ubiCfmNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.0.0 |
ubiCfmRemoteMepStatusChangeRemote MEP state(CC state) change Notification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.10.0.0.1 |
ubiCfmAggPortRemoteMepStatusChangeNotification that Remote MEP state(CC state) on port-gruop change NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.10.0.0.2 |
ubiCfmPmFrameDelayEventTo generate notification when ubiCfmMepPmCurrentValue is bigger than
ubiCfmMaPmDelayThreshold NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.10.0.0.3 |
ubiCfmPmFrameLossEventTo generate notification when ubiCfmMepPmCurrentValue is bigger than
ubiCfmMaPmLossThreshold NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.10.0.0.4 |
ubiCfmMepEtherPingSendResultIndicates the result of the operation:
- ok The Loopback Message(s)reply received
- fail The Loopback Message(s)reply don't recieved
- already active Another LBM is being transmitted
- Not ready Do not initator state machine for LBM sending NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.10.0.0.5 |
ubiCfmMepLinkTraceSendResultA LTR information about LTMs transmitted NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.10.0.0.6 |
ubiCfmCCConfigDefectAlarmThe CCM defect about Config error NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.10.0.0.7 |
ubiCFMMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.1 |
ubiCfmMd OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.1.1 |
ubiCfmMdTableThe Maintenance Domain table. Each row in the table
represents a different Maintenance Domain.
A Maintenance Domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance SEQUENCE OF UbiCfmMdEntry .1.3.6.1.4.1.7800.100.10.1.1.1 |
ubiCfmMdEntryThe Maintenance Domain table entry.
INDEX { ubiBridgeId, ubiCfmMdIndex } UbiCfmMdEntry .1.3.6.1.4.1.7800.100.10.1.1.1.1 |
ubiCfmMdIndexThe index to the Maintenance Domain table. Unsigned32 .1.3.6.1.4.1.7800.100.10.1.1.1.1.1 |
ubiCfmMdNameThe Maintenance Domain name.
Each Maintenance Domain has unique name amongst all those
used or available to a service provider or operator. It
facilitates easy identification of administrative
responsibility for each Maintenance Domain.rw Dot1agCfmMaintDomainName .1.3.6.1.4.1.7800.100.10.1.1.1.1.2 |
ubiCfmMdNameTypeThe type (and thereby format) of the Maintenance Domain Name.
There are two types. IEEE802.1ag type(string, address...etc)
and ITU-T Y.1731 type (itu-t)rw Dot1agCfmMaintDomainNameType2 .1.3.6.1.4.1.7800.100.10.1.1.1.1.3 |
ubiCfmMdLevelThe Maintenance Domain Level. (0 ~ 7 level)rw Dot1agCfmMDLevel .1.3.6.1.4.1.7800.100.10.1.1.1.1.4 |
ubiCfmMdMipCreationEnumerated value indicating whether the management entity can
create MHFs (MIP Half Function) for this Maintenance Domain.
Since, in this variable, there is no encompassing Maintenance
Domain, the value defMHFdefer is not allowed.rw Dot1agCfmMhfCreation { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3) } .1.3.6.1.4.1.7800.100.10.1.1.1.1.5 |
ubiCfmMdRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.1.1.1.6 |
ubiCfmDefaultMdTableFor each bridge component, the Default MD Level Managed Object
controls MHF creation for VIDs that are not attached to a
specific Maintenance Association Managed Object, and Sender ID
TLV transmission by those MHFs.
For each Bridge Port, and for each VLAN ID whose data can
pass through that Bridge Port, an entry in this table is
used by the algorithm in subclause 22.2.3 only if there is no
entry in the Maintenance Association table defining an MA
for the same VLAN ID and MD Level as this table's entry, and
on which MA an Up MEP is defined. If there exists such an
MA, that MA's objects are used by the algorithm in
subclause 22.2.3 in place of this table entry's objects. The
agent maintains the value of ubiCfmDefaultMdRowStatus to
indicate whether this entry is overridden by an MA.
When first initialized, the agent creates this table
automatically with entries for all VLAN IDs,
with the default values specified for each object. SEQUENCE OF UbiCfmDefaultMdEntry .1.3.6.1.4.1.7800.100.10.1.1.2 |
ubiCfmDefaultMdEntryThe Default MD Level table entry. UbiCfmDefaultMdEntry .1.3.6.1.4.1.7800.100.10.1.1.2.1 |
ubiCfmDefaultMdVlanIdThe Primary VID of the VLAN to which this entry's objects
apply. VlanIndex .1.3.6.1.4.1.7800.100.10.1.1.2.1.1 |
ubiCfmDefaultMdLevelA value indicating the MD Level at which MHFs are to be
created, and Sender ID TLV transmission by those MHFs is to
be controlled, for the VLAN to which this entry's objects
apply. If this object has the value -1, the MD Level for MHF
creation for this VLAN is controlled by
ubiCfmDefaultMdLevel.rw Dot1agCfmMDLevel .1.3.6.1.4.1.7800.100.10.1.1.2.1.2 |
ubiCfmDefaultMdMipCreationA value indicating if the Management entity can create MHFs
(MIP Half Function) for this VID at this MD Level. If this
object has the value defMHFdefer, MHF creation for this VLAN
is controlled by dot1agCfmDefaultMdDefMhfCreation.
The value of this variable is meaningless if the values of
ubiCfmDefaultMdMipCreation is false.rw Dot1agCfmMhfCreation { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3), defMHFdefer(4) } .1.3.6.1.4.1.7800.100.10.1.1.2.1.3 |
ubiCfmDefaultMdRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.1.2.1.4 |
ubiCfmMa OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.1.2 |
ubiCfmMaTableThe Maintenance Association table. Each row in the table
represents an MA. An MA is a set of MEPs, each configured
with a single service instance. SEQUENCE OF UbiCfmMaEntry .1.3.6.1.4.1.7800.100.10.1.2.1 |
ubiCfmMaEntryThe MA table entry. UbiCfmMaEntry .1.3.6.1.4.1.7800.100.10.1.2.1.1 |
ubiCfmMaIndexThe index to the Maintenance Association table. Unsigned32 .1.3.6.1.4.1.7800.100.10.1.2.1.1.1 |
ubiCfmMaNameThe Short Maintenance Association name. This name MUST be unique within
a maintenance domain.rw Dot1agCfmMaintAssocName .1.3.6.1.4.1.7800.100.10.1.2.1.1.2 |
ubiCfmMaNameTypeThe type (and thereby format) of the Maintenance Association Name.rw Dot1agCfmMaintAssocNameType .1.3.6.1.4.1.7800.100.10.1.2.1.1.3 |
ubiCfmMaVlanIdThe Primary VLAN ID with which the Maintenance Association is
associated, or 0 if the MA is not attached to any VID.rw VlanIndex .1.3.6.1.4.1.7800.100.10.1.2.1.1.4 |
ubiCfmMaMipCreationIndicates if the Management entity can create MHFs (MIP Half
Function) for this MA.rw Dot1agCfmMhfCreation { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3), defMHFdefer(4) } .1.3.6.1.4.1.7800.100.10.1.2.1.1.5 |
ubiCfmMaRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.2.1.1.6 |
ubiCfmMaAttrTableAn Attribute table for each MA(Maintenance Association).
Such as, CCM transmission interval. SEQUENCE OF UbiCfmMaAttrEntry .1.3.6.1.4.1.7800.100.10.1.2.2 |
ubiCfmMaAttrEntryAn attribute entry UbiCfmMaAttrEntry .1.3.6.1.4.1.7800.100.10.1.2.2.1 |
ubiCfmMaAttrCCIntervalInterval between CCM transmissions to be used by all MEPs
in the MA.
interval3ms(1) CCMs are sent every 3 1/3 milliseconds.
interval10ms(2) CCMs are sent every 10 milliseconds.
interval100ms(3) CCMs are sent every 100 milliseconds.
interval1s(4) CCMs are sent every 1 second.
interval10s(5) CCMs are sent every 10 seconds.
interval1min(6) CCMs are sent every minute.
interval10min(7) CCMs are sent every 10 minutes.rw Integer32 .1.3.6.1.4.1.7800.100.10.1.2.2.1.1 |
ubiCfmMaPmTableAn attribute for Performance Monitoring SEQUENCE OF UbiCfmMaPmEntry .1.3.6.1.4.1.7800.100.10.1.2.3 |
ubiCfmMaPmEntryPerformance Monitoring Entry UbiCfmMaPmEntry .1.3.6.1.4.1.7800.100.10.1.2.3.1 |
ubiCfmMaPmDelayIntervalInterval to trasmit DM(delay measurement)messagerw Integer32 .1.3.6.1.4.1.7800.100.10.1.2.3.1.1 |
ubiCfmMaPmLossIntervalInterval to trasmit LM(loss measurement)messagerw Integer32 .1.3.6.1.4.1.7800.100.10.1.2.3.1.2 |
ubiCfmMaPmDelayThresholdTreshold to limit for delayrw Integer32 .1.3.6.1.4.1.7800.100.10.1.2.3.1.3 |
ubiCfmMaPmLossThresholdTreshold to limit for lossrw Integer32 .1.3.6.1.4.1.7800.100.10.1.2.3.1.4 |
ubiCfmRmep OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.1.3 |
ubiCfmRmepTableInformation of Remote Mep table SEQUENCE OF UbiCfmRmepEntry .1.3.6.1.4.1.7800.100.10.1.3.1 |
ubiCfmRmepEntryInformation of Remote Mep entry UbiCfmRmepEntry .1.3.6.1.4.1.7800.100.10.1.3.1.1 |
ubiCfmRmepIdMaintenance association End Point Identifier of a remote MEP Dot1agCfmMepId .1.3.6.1.4.1.7800.100.10.1.3.1.1.1 |
ubiCfmRmepVlanIdVLAN Identifier of a remote MEP. Same value of local MEP(MA's VID)rw VlanIndex .1.3.6.1.4.1.7800.100.10.1.3.1.1.2 |
ubiCfmRmepRemoteMacAddrThe MAC address of the remote MEP.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.3.1.1.3 |
ubiCfmRmepCrossCheckTypeCrossCheck Type (uicast or multicast).rw Enumeration .1.3.6.1.4.1.7800.100.10.1.3.1.1.4 |
ubiCfmRmepStatusContinuity Status to local MEP from remote MEP.
Remote MEP state machine last entered either the RMEP_FAILED
or RMEP_OK statero Enumeration .1.3.6.1.4.1.7800.100.10.1.3.1.1.5 |
ubiCfmRmepRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.3.1.1.6 |
ubiCfmMep OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.1.4 |
ubiCfmMepTableThe Maintenance Association End Point (MEP) table. SEQUENCE OF UbiCfmMepEntry .1.3.6.1.4.1.7800.100.10.1.4.1 |
ubiCfmMepEntryThe known MEPS table entry. UbiCfmMepEntry .1.3.6.1.4.1.7800.100.10.1.4.1.1 |
ubiCfmMepIdInteger that is unique among all the MEPs in the same MA.
Other definition is:
A small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
association End Point (3.19).
MEP Identifier is also known as the MEPID. Dot1agCfmMepId .1.3.6.1.4.1.7800.100.10.1.4.1.1.1 |
ubiCfmMepMdLevelMD level that belong to this MDrw Dot1agCfmMDLevel .1.3.6.1.4.1.7800.100.10.1.4.1.1.2 |
ubiCfmMepVlanIdAn integer indicating the Primary VID of the MEP, always
one of the VIDs assigned to the MEP's MA. The value 0
indicates that either the Primary VID is that of the
MEP's MA, or that the MEP's MA is associated with no VID.rw VlanIndex .1.3.6.1.4.1.7800.100.10.1.4.1.1.3 |
ubiCfmMepActiveAdministrative state of the MEP. A Boolean indicating the
administrative state of the MEP.
True indicates that the MEP is to function normally, and
false that it is to cease functioning.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.4.1.1.4 |
ubiCfmMepDirectionThe direction in which the MEP faces on the Bridge port.rw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.1.1.5 |
ubiCfmMepMdNameMD name that belong to this MDrw Dot1agCfmMaintDomainName .1.3.6.1.4.1.7800.100.10.1.4.1.1.6 |
ubiCfmMepUniMepThe flag to configure UNI-MEPrw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.1.1.7 |
ubiCfmMepRmepIdThe specified RmepID that is RMEP configuredrw Dot1agCfmMepId .1.3.6.1.4.1.7800.100.10.1.4.1.1.8 |
ubiCfmMepIfnameThis object is the IfIndex of the interface
where MEP configure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.4.1.1.9 |
ubiCfmMepIfMacAddrThsi object is the MAC address of the interface
where MEP configure.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.4.1.1.10 |
ubiCfmMepRdiState of the RDI bit in the sending CCM (true for
RDI=1), or false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.4.1.1.11 |
ubiCfmMepCCTypeThe type of CCM message.rw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.1.1.12 |
ubiCfmMepCCEnableIf set to true, the MEP will generate CCM messages.rw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.1.1.13 |
ubiCfmMepRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.4.1.1.14 |
ubiCfmMepMissingTimeThe pass time after received last CCMro Integer32 .1.3.6.1.4.1.7800.100.10.1.4.1.1.15 |
ubiCfmMepExpiredTimeThe remain time till Expired RMEP statusro Integer32 .1.3.6.1.4.1.7800.100.10.1.4.1.1.16 |
ubiCfmMepForceEgressTagUNI-MEP send CCM with VID information(tagged)
or send CCM without VID information (untagged).
If set none-value, tag information is depend on
egress interface policyrw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.1.1.17 |
ubiCfmMepPmDelayTablePerformance Monitoring Table SEQUENCE OF UbiCfmMepPmDelayEntry .1.3.6.1.4.1.7800.100.10.1.4.2 |
ubiCfmMepPmDelayEntryPerformance Monitoring Entry UbiCfmMepPmDelayEntry .1.3.6.1.4.1.7800.100.10.1.4.2.1 |
ubiCfmMepPmDelayRmepRemote MEP ID to measure performancerw INTEGER .1.3.6.1.4.1.7800.100.10.1.4.2.1.1 |
ubiCfmMepPmDelayFrameTypeThe type of frame that is to measurerw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.2.1.2 |
ubiCfmMepPmDelayCurrentValueResult value of measurementrodeprecated Unsigned32 .1.3.6.1.4.1.7800.100.10.1.4.2.1.3 |
ubiCfmMepPmDelayTxIntervalPeriod that operate performance monitoringrw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.2.1.4 |
ubiCfmMepPmDelayStateResult state of measurement.
If ubiCfmMepPmCurrentValue is lower than threshold,
ubiCfmMepPmState is OK. If ubiCfmMepPmCurrentValue is
over the configured threshold, ubiCfmMepPmState is FAIL.ro Enumeration .1.3.6.1.4.1.7800.100.10.1.4.2.1.5 |
ubiCfmMepPmDelayRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.4.2.1.6 |
ubiCfmMepPmDelayMinMinimum delay measured by performance monitoringro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.7800.100.10.1.4.2.1.7 |
ubiCfmMepPmDelayMaxMaximum delay measured by performance monitoringro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.7800.100.10.1.4.2.1.8 |
ubiCfmMepPmDelayAvgAverage of delay measured by performance monitoringro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.7800.100.10.1.4.2.1.9 |
ubiCfmMepPmLossTablePerformance Monitoring Table SEQUENCE OF UbiCfmMepPmLossEntry .1.3.6.1.4.1.7800.100.10.1.4.3 |
ubiCfmMepPmLossEntryPerformance Monitoring Entry UbiCfmMepPmLossEntry .1.3.6.1.4.1.7800.100.10.1.4.3.1 |
ubiCfmMepPmLossRmepRemote MEP ID to measure performancerw INTEGER .1.3.6.1.4.1.7800.100.10.1.4.3.1.1 |
ubiCfmMepPmLossFrameTypeThe type of frame that is to measurerw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.3.1.2 |
ubiCfmMepPmLossCurrentValueResult value of measurementrodeprecated Unsigned32 .1.3.6.1.4.1.7800.100.10.1.4.3.1.3 |
ubiCfmMepPmLossTxIntervalPeriod that operate performance monitoringrw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.3.1.4 |
ubiCfmMepPmLossStateResult state of measurement.
If ubiCfmMepPmCurrentValue is lower than threshold,
ubiCfmMepPmState is OK. If ubiCfmMepPmCurrentValue is
over the configured threshold, ubiCfmMepPmState is FAIL.ro Enumeration .1.3.6.1.4.1.7800.100.10.1.4.3.1.5 |
ubiCfmMepPmLossRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.4.3.1.6 |
uniCfmMepPmLossNearEndTotFrame loss of near end measured by performance monitoringro Integer32 .1.3.6.1.4.1.7800.100.10.1.4.3.1.7 |
uniCfmMepPmLossFarEndTotFrame loss of far end measured by performance monitoringro Integer32 .1.3.6.1.4.1.7800.100.10.1.4.3.1.8 |
ubiCfmMepPmLossRttMinMinimum route-trip time between MEPsro Integer32 .1.3.6.1.4.1.7800.100.10.1.4.3.1.9 |
ubiCfmMepPmLossRttMaxMaximum route-trip time between MEPsro Integer32 .1.3.6.1.4.1.7800.100.10.1.4.3.1.10 |
ubiCfmMepPmLossRttAvgAverage of route-trip time between MEPsro Integer32 .1.3.6.1.4.1.7800.100.10.1.4.3.1.11 |
ubiCfmMepOamSend OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.1.4.4 |
ubiCfmMepOamSendBridgeIdBridge ID to send Ping or Linktracerw Integer32 .1.3.6.1.4.1.7800.100.10.1.4.4.1 |
ubiCfmMepOamSendMdIndexMaintenance Domain ID to send Ping or Linktracerw Unsigned32 .1.3.6.1.4.1.7800.100.10.1.4.4.2 |
ubiCfmMepOamSendMaIndexMaintenance Association ID to send Ping or Linktracerw Unsigned32 .1.3.6.1.4.1.7800.100.10.1.4.4.3 |
ubiCfmMepOamSendMepIdMEP ID to send Ping or Linktracerw Unsigned32 .1.3.6.1.4.1.7800.100.10.1.4.4.4 |
ubiCfmMepOamSendDstMacDestination MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.4.4.5 |
ubiCfmMepOamSendLoopbackFrameTypeType of CFM loopback Frame (ETH-LB)rw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.4.6 |
ubiCfmMepOamSendLoopbackFrameCountCounter to transmit CFM loopback framerw Counter32 .1.3.6.1.4.1.7800.100.10.1.4.4.7 |
ubiCfmMepOamSendExecuteSend ping/linktrace messagesrw Enumeration .1.3.6.1.4.1.7800.100.10.1.4.4.8 |
ubiCfmMepOamResult OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.1.4.5 |
ubiCfmMepOamResultEtherPingThe result of Loopback message sent.
If already Loopback function activate, send trap
result value on already_activated. if CC not connected or
unicast RMEP crosscheck type, send trap result value on not_ready.ro Enumeration .1.3.6.1.4.1.7800.100.10.1.4.5.1 |
ubiCfmMepOamResultEtherPingSndCountCounter of CFM loopback frame to sendro Counter32 .1.3.6.1.4.1.7800.100.10.1.4.5.2 |
ubiCfmMepOamResultEtherPingRcvCountReceived counter of CFM lopback replyro Counter32 .1.3.6.1.4.1.7800.100.10.1.4.5.3 |
ubiCfmMepOamResultEtherPingRttMinMinimum round-trip time measured by CFM loopback framero Integer32 .1.3.6.1.4.1.7800.100.10.1.4.5.4 |
ubiCfmMepOamResultEtherPingRttMaxMaximum round-trip time measured by CFM loopback framero Integer32 .1.3.6.1.4.1.7800.100.10.1.4.5.5 |
ubiCfmMepOamResultEtherPingRttAvgAverage of round-trip time measured by CFM loopback framero Integer32 .1.3.6.1.4.1.7800.100.10.1.4.5.6 |
ubiCfmMepOamResultLinkTraceSrcMacAddrMAC address returned in the ingress MAC address field.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.4.5.7 |
ubiCfmMepOamResultLinkTraceRcvIfIndexThe index of local interface of received LTRro Integer32 .1.3.6.1.4.1.7800.100.10.1.4.5.8 |
ubiCfmMepOamResultLinkTraceRelayActionIndicates if a LTM was forwarded by the responding MP, as
returned in the 'relay-hit' or 'relay-fdb' flag of the
flags field. If other LT function already activate,
on already_activated value. else if CC is not OK state,
on not_ready valuero Enumeration .1.3.6.1.4.1.7800.100.10.1.4.5.9 |
ubiCfmMepOamResultLinkTraceHopCounthop count for a returned LTR.ro Integer32 .1.3.6.1.4.1.7800.100.10.1.4.5.10 |
ubiCfmCCConfigDefectTableThe CCM config defect table SEQUENCE OF UbiCfmCCConfigDefectEntry .1.3.6.1.4.1.7800.100.10.1.4.6 |
ubiCfmCCConfigDefectEntryThe CCM config defect entry UbiCfmCCConfigDefectEntry .1.3.6.1.4.1.7800.100.10.1.4.6.1 |
ubiCfmMepCCConfigDefectNumber of Defect
0: None
1: Unexpected MEP ID
2: Unexpected Tx interval
3: Already Existed MEPro Enumeration .1.3.6.1.4.1.7800.100.10.1.4.6.1.1 |
ubiCfmMepCCConfigDefectStateState of defect condition
0: DefectConditionExit
1: DefectConditionEntryro Enumeration .1.3.6.1.4.1.7800.100.10.1.4.6.1.2 |
ubiCfmServerMep OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.1.5 |
ubiCfmServerMepTableA Server MEP represents the compound function of the
Server layer termination function and Server/ETH adaptation
function which is used to notify the ETH layer MEPs upon
failure detection by the Server layer termination function or
Server/ETH adaptation function, where the Server layer
termination function is expected to run OAM mechanisms specific
to the Server layer.
A Server MEP needs to support ETH-AIS function, as described
in clause 7.4, where the Server/ETH adaptation function is
required to issue frames with ETH-AIS information upon detection of
defect at the Server layer by the Server layer termination
and/or adaptation function.
(ITU-T Y.1731 5.3.1) SEQUENCE OF UbiCfmServerMepEntry .1.3.6.1.4.1.7800.100.10.1.5.1 |
ubiCfmServerMepEntryServer MEP entry UbiCfmServerMepEntry .1.3.6.1.4.1.7800.100.10.1.5.1.1 |
ubiCfmServerMepTxIntervalPeriodic Interval of AIS Transmissionrw INTEGER (1 | 60) .1.3.6.1.4.1.7800.100.10.1.5.1.1.1 |
ubiCfmServerMepAisLevelDestinaction Maintenance Domain Level of AISrw Dot1agCfmMDLevel .1.3.6.1.4.1.7800.100.10.1.5.1.1.2 |
ubiCfmServerMepRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.5.1.1.3 |
ubiCfmNotificationEnables OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.1.6 |
ubiCfmRemoteMepStateChangeEnabledRemote MEP state(CC state) change Notificationrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.6.1 |
ubiCfmPmEventEnabledubiCfmMepPmState change Notificationrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.6.2 |
ubiCfmCCConfigDefectAlarmEnabledDetect CCM config Defect notificationrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7800.100.10.1.6.3 |
ubiCfmTrack OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.1.7 |
ubiCfmTrackEnableNot userw Bits .1.3.6.1.4.1.7800.100.10.1.7.1 |
ubiCfmTrackTargetTableNot use SEQUENCE OF UbiCfmTrackTargetEntry .1.3.6.1.4.1.7800.100.10.1.7.2 |
ubiCfmTrackTargetEntryNot use UbiCfmTrackTargetEntry .1.3.6.1.4.1.7800.100.10.1.7.2.1 |
ubiCfmTrackTargetSetNot userw Enumeration .1.3.6.1.4.1.7800.100.10.1.7.2.1.1 |
ubiCFMMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.2 |
ubiCfmMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.2.1 |
ubiCfmMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.10.2.2 |