UBQS-AUTO-RESET-MIB
The UBQS-AUTO-RESET-MIB module monitors and manages auto-reset configuration parameters and status events for Ubiquiti Networks (UBNT) UniFi Switches (UBQS series), specifically tracking system reboot triggers and reset counters to facilitate automated recovery from hardware or software faults.
Imported Objects
Objects
43 total| Object Name |
|---|
ubiAutoResetMIBThe UBQS-AUTO-RESET-MIB is used for getting
information about the Auto-reset of system. MODULE-IDENTITY .1.3.6.1.4.1.7800.100.27 |
IMPORTSThe UBQS-AUTO-RESET-MIB is used for getting
information about the Auto-reset of system. Unknown .1.3.6.1.4.1.7800.100.27 |
ubiAutoResetMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.27.0 |
ubiAutoResetCpuNotification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.27.0.1 |
ubiAutoResetMemoryNotification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.27.0.2 |
ubiAutoResetIcmpNotification NOTIFICATION-TYPE .1.3.6.1.4.1.7800.100.27.0.3 |
ubiAutoResetMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.27.1 |
ubiAutoResetDelayTimeWhen Auto-reset is occured, system is reboot after delaytime.rw Integer32 UNITS "minutes" .1.3.6.1.4.1.7800.100.27.1.1 |
ubiAutoResetEnabledIt is enable to sending auto-reset SNMP trap message.
cpu(0) : Auto-reset by CPU
memory(1) : Auto-reset by MEMORY
icmp(2) : Auto-reset by ICMPrw Bits .1.3.6.1.4.1.7800.100.27.1.2 |
ubiAutoResetCpu OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.27.1.3 |
ubiAutoResetCpuIntervalMonitoring period of CPU usage.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.7800.100.27.1.3.1 |
ubiAutoResetCpuUsageCurrent CPU usagero Counter32 UNITS "%" .1.3.6.1.4.1.7800.100.27.1.3.2 |
ubiAutoResetCpuActionCPU Auto-reset Action type.
If Auto-reset is supressed, Action is suppress(4),
othrewise, none(0).
It is used by trap message.
Delay(1) : Delayed Auto-reset is occurrd.
reset(2) : Auto-reset is occurrd.
supress(3) : Auto-reset is suppressed.
cancel_delay(4): Delayed Auto-reset is canceled.ro Enumeration .1.3.6.1.4.1.7800.100.27.1.3.3 |
ubiAutoResetCpuLogThresholdCPU auto-reset LOG threshold.
If CPU usage exceed LogThreshold for Cpu interval,
Warning message is printed.rw Integer32 .1.3.6.1.4.1.7800.100.27.1.3.4 |
ubiAutoResetCpuReloadThresholdCPU auto-reset Reload threshold.
If CPU usage exceed ReloadThreshold for Cpu interval,
Auto-reset is occured.rw Integer32 .1.3.6.1.4.1.7800.100.27.1.3.5 |
ubiAutoResetCpuResetReasonCPU auto-reset Warning message reason.
It indicate warning message by LogThreshold,
or by ReloadThershold.ro Enumeration .1.3.6.1.4.1.7800.100.27.1.3.6 |
ubiAutoResetCpuExecuteIt indicate whether CPU auto-reset is enabled.ro Enumeration .1.3.6.1.4.1.7800.100.27.1.3.7 |
ubiAutoResetCpuSuppressReloadCountNunber of CPU auto-reset occurrence.ro Counter32 .1.3.6.1.4.1.7800.100.27.1.3.8 |
ubiAutoResetMemory OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.27.1.4 |
ubiAutoResetMemoryIntervalMonitoring period of free memory.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.7800.100.27.1.4.1 |
ubiAutoResetMemoryfreeCurrent Free memory.ro Counter32 UNITS "Kbytes" .1.3.6.1.4.1.7800.100.27.1.4.2 |
ubiAutoResetMemoryActionMemory Auto-reset Action type.
If Auto-reset is supressed, Action is suppress(4),
othrewise, none(0).
It is used by trap message.
Delay(1) : Delayed Auto-reset is occured.
reset(2) : Auto-reset is occured.
supress(3) : Auto-reset is suppressed.
cancel_delay(4): Delayed Auto-reset is canceled.ro Enumeration .1.3.6.1.4.1.7800.100.27.1.4.3 |
ubiAutoResetMemoryLogThresholdMemory auto-reset LOG threshold.
If Free Memory lower LogThreshold for Memory interval,
Warning message is printed.rw Integer32 .1.3.6.1.4.1.7800.100.27.1.4.4 |
ubiAutoResetMemoryReloadThresholdMemory auto-reset Reload threshold.
If Free memory lower ReloadThreshold for Memory interval,
Auto-reset is occured.rw Integer32 .1.3.6.1.4.1.7800.100.27.1.4.5 |
ubiAutoResetMemoryResetResonMemory auto-reset Warning message reason.
It indicate warning message by LogThreshold,
or by ReloadThershold.ro Enumeration .1.3.6.1.4.1.7800.100.27.1.4.6 |
ubiAutoResetMemoryExecuteIt indicate whether Memory auto-reset is enabled.ro Enumeration .1.3.6.1.4.1.7800.100.27.1.4.7 |
ubiAutoResetMemorySuppressReloadCountNunber of Memory auto-reset occurrence.ro Counter32 .1.3.6.1.4.1.7800.100.27.1.4.8 |
ubiAutoResetIcmp OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.27.1.5 |
ubiAutoResetIcmpIntervalICMP Echo request interval.rw Integer32 .1.3.6.1.4.1.7800.100.27.1.5.1 |
ubiAutoResetIcmpTimeoutICMP Echo request timeout.rw Integer32 .1.3.6.1.4.1.7800.100.27.1.5.2 |
ubiAutoResetIcmpFailCountICMP Echo request failed count.ro Counter32 .1.3.6.1.4.1.7800.100.27.1.5.3 |
ubiAutoResetIcmpActionICMP Auto-reset Action type.
If Auto-reset is supressed, Action is suppress(4),
othrewise, none(0).
It is used by trap message.
Delay(1) : Delayed Auto-reset is occurred.
reset(2) : Auto-reset is occurred.
supress(3) : Auto-reset is suppressed.
cancel_delay(4): Delayed Auto-reset is canceled.ro Enumeration .1.3.6.1.4.1.7800.100.27.1.5.4 |
ubiAutoResetIcmpLogThresholdICMP auto-reset LOG threshold.
If ICMP echo request fail count exceed LogThreshold,
Warning message is printed.rw Integer32 .1.3.6.1.4.1.7800.100.27.1.5.5 |
ubiAutoResetIcmpReloadThresholdICMP auto-reset LOG threshold.
If ICMP echo request fail count exceed ReloadThreshold,
Auto-reset is occured.rw Integer32 .1.3.6.1.4.1.7800.100.27.1.5.6 |
ubiAutoResetIcmpDstAddrICMP echo request Target Address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.100.27.1.5.7 |
ubiAutoResetIcmpResetReasonICMP auto-reset Warning message reason.
It indicate warning message by LogThreshold,
or by ReloadThershold.ro Enumeration .1.3.6.1.4.1.7800.100.27.1.5.8 |
ubiAutoResetIcmpExecuteIt indicate whether ICMP auto-reset is enabled.ro Enumeration .1.3.6.1.4.1.7800.100.27.1.5.9 |
ubiAutoResetIcmpSuppressReloadCountNunber of ICMP auto-reset occurrence.ro Counter32 .1.3.6.1.4.1.7800.100.27.1.5.10 |
ubiAutoResetSuppressReloadLimitIt is limit of Auto-reset.
If number of auto-reset exceed SuppressReloadLimit,
Auto-reset is suppressed.rw Integer32 .1.3.6.1.4.1.7800.100.27.1.6 |
ubiAutoResetClearDelayReloadCancel delayed Auto-reset.rw Enumeration .1.3.6.1.4.1.7800.100.27.1.7 |
ubiAutoResetMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.27.2 |
ubiAutoResetMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.27.2.1 |
ubiAutoResetMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.100.27.2.2 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.