UBIQUOSS-SYSINFO-MIB
The UBIQUOSS-SYSINFO-MIB enables remote configuration of SNMP notification parameters, specifically allowing administrators to define trap destinations, severity levels, and event filtering criteria for Ubiquiti UniFi network devices. This module facilitates precise control over the generation and routing of system alerts, including device status changes, authentication failures, and interface state transitions, without requiring direct CLI access.
Imported Objects
Objects
24 total| Object Name |
|---|
ubiSysInfoMIBThis MIB module defines MIB objects which provide
mechanisms to remotely configure the parameters
used by an SNMP entity for the generation of
notifications. MODULE-IDENTITY .1.3.6.1.4.1.7800.2.100 |
ubiSysInfoMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.100.1 |
ubiSysInfoTableinformation of configuration SEQUENCE OF UbiSysInfoEntry .1.3.6.1.4.1.7800.2.100.1.1 |
ubiSysInfoEntryinformation of configuration UbiSysInfoEntry .1.3.6.1.4.1.7800.2.100.1.1.1 |
ubiSysIndexAn index value that uniquely identifies this chassisro Integer32 .1.3.6.1.4.1.7800.2.100.1.1.1.1 |
ubiSysDescrro DisplayString .1.3.6.1.4.1.7800.2.100.1.1.1.2 |
ubiSysObjectIDro OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.100.1.1.1.3 |
ubiSysUpTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7800.2.100.1.1.1.4 |
ubiSysNamerw DisplayString .1.3.6.1.4.1.7800.2.100.1.1.1.5 |
ubiSysSerialNumberSerialNumberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.100.1.1.1.6 |
ubiSysMacAddresssystem mac addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.7800.2.100.1.1.1.7 |
ubiSysHwVersionhardware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.100.1.1.1.8 |
ubiSysSwVersionsoftware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.100.1.1.1.9 |
ubiSysFwVersionfirmware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.7800.2.100.1.1.1.10 |
ubiSysResetreset of systemrw Enumeration .1.3.6.1.4.1.7800.2.100.1.1.1.11 |
ubiSystemDateAndTimesystem date and time stringrw DisplayString .1.3.6.1.4.1.7800.2.100.1.1.1.12 |
ubiTimeZoneCurrentDescription.rw DisplayString .1.3.6.1.4.1.7800.2.100.1.1.1.13 |
ubiSysDayBannerModify the system Day bannerrw DisplayString .1.3.6.1.4.1.7800.2.100.1.1.1.14 |
ubiSysInfoMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.100.2 |
ubiSysInfoMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.100.2.0 |
ubiSysAlarmNotificationA sysAlarmNotification is sent if system restart. NOTIFICATION-TYPE .1.3.6.1.4.1.7800.2.100.2.0.1 |
ubiSysInfoMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.100.3 |
ubiSysInfoMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.100.3.1 |
ubiSysInfoMonMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7800.2.100.3.2 |
More MIBs from Ubiquoss
Browse all UbiquossMIBs →The UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for EPON (Ethernet Passive Optical Network) PON interfaces on Ubiquoss optical line terminal (OLT) hardware. It enables the definition, monitoring, and enforcement of traffic shaping, priority queuing, and bandwidth allocation policies across specific PON port groups.
The UBIQUOSS-10GEPON-PON-PROFILE-GROUP-MIB manages Quality of Service (QoS) profile configurations and parameters for Ubiquiti 10G-EPON Optical Line Terminals (OLTs). It enables the definition and monitoring of traffic shaping rules, bandwidth limits, and priority queues applied to specific PON profile groups within the access network.
The UBIQUOSS-EPON-PM-GROUP-MIB module enables monitoring of performance metrics for Ubiquiti EPON (Ethernet Passive Optical Network) interfaces, specifically tracking traffic counters, error statistics, and link utilization data for optical line terminals and optical network units.
The UBIQUOSS-EPON-PON-MAC-GROUP-MIB module provides management interfaces for monitoring and configuring MAC-layer parameters, including subscriber MAC addresses, VLAN mappings, and traffic statistics, within Ubiquiti's EPON (Ethernet Passive Optical Network) access network infrastructure.
The UBIQUOSS-10GEPON-PM-GROUP-MIB module enables performance monitoring of Ubiquiti 10G-EPON optical line terminals and optical network units by exposing traffic counters, error statistics, and link utilization metrics. It facilitates the collection of physical layer and data link layer performance data, including bit error rates, packet drops, and interface throughput, for network capacity planning and fault isolation.
The UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB module enables monitoring and management of MAC layer statistics, session states, and interface counters for Ubiquiti 10G Ethernet Passive Optical Network (EPON) optical line terminals and optical network units. It provides specific visibility into 10G-EPON MAC protocol operations, including port status, traffic counters, and subscriber link metrics required for provisioning and fault isolation.