TROPIC-OTH-MIB
AI MIB Summary
The TROPIC-OTH-MIB module provides SNMP-based management and monitoring of Dense Wavelength Division Multiplexing (DWDM) Optical Transport Hierarchy (OTH) attributes, specifically tracking optical channel performance metrics, signal integrity parameters, and transport layer status for Tropic Networks optical transport equipment.
DWDM OTH MIB attributes.
Main OID:
tnOthMibModule.1.3.6.1.4.1.7483.1.1.2.2.4.8
290
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
290 total| Object Name |
|---|
tnOthMibModuleDWDM OTH MIB attributes. MODULE-IDENTITY .1.3.6.1.4.1.7483.1.1.2.2.4.8 |
tnOthConf OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.10.1 |
tnOthGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.10.1.1 |
tnOthOdukScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.1 |
tnOthOdukGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.2 |
tnOthOdukTtpScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.3 |
tnOthOdukTtpGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.4 |
tnOthOdukNimScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.5 |
tnOthOdukNimGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.6 |
tnOthGcc12ScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.7 |
tnOthGcc12Group. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.8 |
tnOthOdukTScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.9 |
tnOthOdukTGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.10 |
tnOthOdukXcScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.13 |
tnOthOdukXcGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.14 |
tnOthOdukApsScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.15 |
tnOthOdukApsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.16 |
tnOthOdukMemberScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.17 |
tnOthOdukMemberGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.18 |
tnOthOdukApsGroupIdScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.19 |
tnOthOdukApsGroupIdGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.20 |
tnOthOdukOptsgScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.21 |
tnOthOdukOptsgGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.22 |
tnOthOdukDMConfigScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.23 |
tnOthOdukDMConfigGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.24 |
tnOthOdukDMInfoScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.25 |
tnOthOdukDMInfoGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.26 |
tnOthOdukIncFtflInfoScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.27 |
tnOthOdukIncFtflInfoGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.28 |
tnOthOdukEncryptionScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.29 |
tnOthOdukEncryptionGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.30 |
tnOduChanPoolGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.31 |
tnOduPrbsScalarsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.32 |
tnOduPrbsGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.1.33 |
tnOthCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.10.1.2 |
tnOthCompliance. Unknown .1.3.6.1.4.1.7483.2.2.4.10.1.2.1 |
tnOthObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.10.2 |
tnOthBasics OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.10.2.1 |
tnOthOdukAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.1 |
tnOthOdukTable. SEQUENCE OF TnOthOdukEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.2 |
tnOthOdukEntry. TnOthOdukEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1 |
tnOthIfIndexA unique index, greater than zero, for each ODU entity. This is the high-order index part. ------------------------------------------------------ | Bit31-Bit24 | Bit23-Bit16 | Bit15-Bit3 | Bit2-Bit0 | --------------+-------------+------------+------------ | 8 bits | 8 bits | 13 bits | 3 bits | --------------+-------------+------------+------------ | shelf | slot | HO-ODU | Reserved | | | | Number | as 0 | ------------------------------------------------------ For the 260SCX2 card, the bits in this attribute are used as the following: ------------------------------------------------------ | Bit31-Bit24 | Bit23-Bit16 | Bit15-Bit8 | Bit7-Bit0 | --------------+-------------+------------+------------ | 8 bits | 8 bits | 8 bits | 8 bits | --------------+-------------+------------+------------ | shelf | slot | port | Reserved | | | | | as 0 | ------------------------------------------------------ The bits in the port are further broken down as the following: For L1Ch1/L1CH2 ports Broken 8 bits of port (Bit15 to Bit8) into 3 bits for port Broken 8 bits of reserved (Bit7-Bit0) into 4 Bits of Channel ------------------------------------------------------------------- | Bit31-Bit24 | Bit23-Bit16 | Bit15-Bit11 | Bit10-Bit8 | Bit7-Bit4 | Bit3-Bit0 --------------+-------------+------------+--------------+------------------------ | 8 bits | 8 bits | | 3 bits | 4 bits | 4 bits | --------------+-------------+------------+-------------+-------------+------------ | shelf | slot | Reserved | port | Channel | Reserved 4 bits as zero | Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.1 |
tnOthIfIndexLoA unique index, greater than zero, for each ODU entity. This is the low-order index part. ----------------------------------------------------------- | Bit31-Bit29 | Bit28-Bit27 | Bit26-Bit25 | Bit24-Bit16 | --------------+---------------+-------------+-------------+ | 3 bits | 2 bits | 2 bits | 9 bits | --------------+---------------+-------------+-------------+ | TCM Level | TCM Direction | Reserved | Lo-ODUID | | (1-6) | (AM=1, BM=2) | as 0 | | ----------------------------------------------------------- --------------------------------------- | Bit15-Bit10 | Bit9-Bit5 | Bit4-Bit0 | --------------+-----------+-----------+ | 6 bits | 5 bits | 5 bits | --------------+-----------+------------ | Container | HO-ODU | LO-ODU | | Type | ODU Type | ODU Type | --------------------------------------- Container Type | Value ------------------------------------+--------- NULL | 0 HO-ODU NIM | 1 Client Transparent ODU | 2 LO-ODU NIM | 3 ODU-TP | 4 ODU POOL | 5 ODU1PTF (11dpm12/4qpa8 specific) | 6 OPTSG | 7 ODUTYPE | Value ----------------+--------- NULL | 0 ODU0 | 1 ODU1 | 2 ODU1e | 3 ODU1f | 4 ODU2 | 5 ODU2e | 6 ODU2f | 7 ODU3 | 8 ODU3e1 | 9 ODU3e2 | 10 ODU4 | 11 ODUflex(CBR) | 12 OPTSG | 13 ODUflex(GFP) | 14 Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.2 |
tnOthOdukDirectionalityIndicates the directionality of the entity.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.3 |
tnOthOdukRateIndicates the ODUk entity rate.ro AluWdmOthOdukRate (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.4 |
tnOthOdukTcmFieldsInUseIndicates the TCM fields and TTP/NIM attributes that are currently in use. A bit that is set to 1 means that the corresponding TCM field is used. This object will be updated when rows are created in or deleted from tnOthOdukTTable.ro Bits .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.5 |
tnOthOdukTtpPresentThis object has the value true(1) if the ifEntry under which it is instantiated contains an ODUk Trail Termination Point, i.e., the endpoint of an ODUk path. In that case there will be a corresponding row in the ODUk TTP config table and it will not be possible to create corresponding rows in tnOthOdukNimTable. This object has the value false(2) if the ifEntry under which it is instantiated contains an intermediate ODUk Connection Termination Point. In that case there is no corresponding row in tnOthOdukTtpTable, but it will be possible to create corresponding rows in tnOthOdukNimTable. This object also affects the allowable options in rows created in tnOthGcc12Table, as specified in the DESCRIPTION clauses of the columns in those tables.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.6 |
tnOthOdukAdminStatusODUk administrative state. It may be used to suppress the alarms or disable consequent actions on the ODU entity.rw AluWdmOdukStatus (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.7 |
tnOthOdukStateAINSODUk state AINS attributes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.8 |
tnOthOdukOperStatusODUk operational state of the interface.ro AluWdmOdukStatus (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.9 |
tnOthOdukStateQualifierIndicates the state qualifier (i.e., the secondary state) of the ODUk state.ro TropicStateQualifierType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.10 |
tnOthOdukOperationalCapabilityThe partiallyEnabled(3) state means an abnormal state.ro TropicOperationalCapabilityType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.11 |
tnOthOdukAINSDebounceTimeThis attribute must be set in multiples of 60s. It is equal to system AINS debounce time when port AINS use system default is true. Setting the OTUk AINS debounce time and OTUk AINS use system default to true in the same set request is restricted. Current configurable range: 1m to 96h 0m.rw Integer32 UNITS "Seconds" .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.12 |
tnOthOdukUsingSysAINSDebounceTimeUsing system AINS debounce time. Sets with a value of false are restricted. The network operator must set OTUk AINS debounce time to some valid value to disable the use of system AINS debounce time. Setting the port AINS debounce time and port AINS use system default to true in the same set request is restricted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.13 |
tnOthOdukAINSDebounceTimeRemainingNumber of seconds until the OTUk AINS debounce time expires. If port AINS is false or port AINS debounce time is 0, the value of this attribute will be 0.ro Unsigned32 UNITS "Seconds" .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.14 |
tnOthOdukForceAdminStatusSetting this attribute to execute will force tnOthOdukAdminStatus change. This works only when tnOthOdukAdminStatus is down. When queried, this attribute returns a value of noCmd.rw TnCommand (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.15 |
tnOthOdukMgracdIndicates if managed by CP, MGNPLN, shared by both or free.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.16 |
tnOthOdukAlmProfName.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.17 |
tnOthOdukFlexTypeLO-ODU OduFlex Type to distinguish two oduflex subTypes GFP or CBR.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.18 |
tnOthOdukFlexClientTypeIndicates client type/CBR signal carried by the oduflex and it is applicable to CBR.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.19 |
tnOthOdukFlexGfpSizeIndicates the size in terms of tributary slots and its applicable to only ODUFLEX GFP.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.20 |
tnOthOdukMsiSupMSI Supervision determines whether the incoming MSI is supervised/monitored in order to detect dMSIM defects for all contained LO-ODus. true - incoming MSI is used to monitor dMSIM for all contained LO-ODus false - incoming MSI is not used for supervised.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.21 |
tnOthOdukFacilityDescriptorName.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.22 |
tnOthOdukFacilityDescriptorDesc.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.23 |
tnOthOdukFacilityDescriptorCirId.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.24 |
tnOthOdukFacilityDescriptorConnPtIdConnection Point Id.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.25 |
tnOthOdukFacilityDescCustLifeCycleStateCustomer life cycle state.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.26 |
tnOthOdukFacilityDescAdminStateAdmin state.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.2.1.27 |
tnOthOdukTtpAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.3 |
tnOthOdukTtpTable. SEQUENCE OF TnOthOdukTtpEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.4 |
tnOthOdukTtpEntry. TnOthOdukTtpEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1 |
tnOthOdukTtpSapiTransmittedThe SAPI bytes in the trace identifier transmitted. This object is applicable when tnOthOdukDirectionality has the value source(2) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value sink(1). TXSAPI is the fist 16 Octets (TTI[0]-TTI[15]) and TTI[0] (i.e., SAPI[0]) shall be fixed to all 0s.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.1 |
tnOthOdukTtpDapiExpectedThe DAPI bytes expected by the receiver.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.2 |
tnOthOdukTtpSapiExpectedThe SAPI expected by the receiver. This object is applicable only to the sink function, i.e., only when tnOthOdukDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value source(2). This object has no effect when tnOthOdukTtpTimDetMode has the value off(1).rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.3 |
tnOthOdukTtpTraceIdentifierAcceptedThe actual trace identifier accepted. This object is applicable only to the sink function, i.e., only when tnOthOdukDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value source(2). The value of this object is unspecified when tnOthOdukTtpCurrentStatus indicates a near-end defect (i.e., oci(0), lck(1), ssf(5)) that prevents extraction of the trace message. It consists of the following three parts: - RXSAPI is the fist 16 octets (TTI[0]-TTI[15]) - RXDAPI is the second 16 octets (TTI[16]-TTI[31]) - RXOS (operator specific) is the last 32 octets (TTI[32]-TTI[63]) TTI[0] (i.e., SAPI[0]) and TTI[16] (i.e., DAPI[0]) shall be fixed to all 0s.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.4 |
tnOthOdukTtpTimDetModeIndicates the mode of the Trace Identifier Mismatch (TIM) Detection function. This object is applicable only to the sink function, i.e., only when tnOthOdukDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value source(2).rw AluWdmTimDetMode (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.5 |
tnOthOdukTtpTimActEnabledIndicates whether the Trace Identifier Mismatch (TIM). Consequent Action function is enabled. This object is applicable only to the sink function; i.e., only when tnOthOdukDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value source(2). This object has no effect when tnOthOdukTtpTimDetMode has the value off(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.6 |
tnOthOdukTtpTtiStatusODUk TTI status.ro AluWdmTtiStatus (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.7 |
tnOthOdukTtpDegThrSpecifies the burst threshold as a number of errored blocks on the ODU layer. A second is declared as good if the number of detected errored blocks within one second is less than tnOthOdukTtpDegThr, otherwise the second is declared as bad second.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.8 |
tnOthOdukTtpDegMSpecifies the number of consecutive bad seconds (tnOthOdukTtpDegM* tnOthOdukTtpDegPeriod) to be detected before declaring a signal degrade defect on the ODU. The defect is cleared if tnOthOdukTtpDegM* tnOthOdukTtpDegPeriod consecutive good seconds are detected. Current Configurable range: 1 to 10.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.9 |
tnOthOdukPayloadTypeThe ODUk payload type value provisioned on the transmitting direction. This is applicable only to an ODU adaptation function.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.10 |
tnOthOdukRxPayloadTypeThe received ODUk payload type value. Current Range: 0 to 255.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.11 |
tnOthOdukPlmConsequenceActionPLM consequence action.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.12 |
tnOthOdukTxOduStructThe transmitted ODU payload structure value. It is programmed into the transmitted ODU MSI bytes.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.13 |
tnOthOdukRxOduStructThe received ODU payload structure value. It is retrieved from the received ODU MSI bytes.ro SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.14 |
tnOthOdukTtpCurrentStatusIndicates the defect condition of the entity, if any. This object is applicable only to the sink function, i.e., only when tnOthOdukDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality has the value source(2).ro AluWdmOthOdukCurrentStatusBits (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.15 |
tnOthOdukOdu0InterwkOduk Odu0 interworking.rw AluWdmEnabledDisabled (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.16 |
tnOthOdukTtpDapiAcceptedThe DAPI bytes received.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.17 |
tnOthOdukTtpDapiTransmittedThe DAPI bytes transmitted. The TTI[17] to TTI[31] contain the 15-character destination access point identifier (DAPI).rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.18 |
tnOthOdukTtpOsAcceptedThe OS bytes receivedro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.19 |
tnOthOdukTtpOsTransmittedThe OS bytes transmitted. The TTI[32] to TTI[63] contain the 32-character Operator Specific(OS).rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.20 |
tnOthOdukRxMSIIndicates the MSI values. The MSI is reported as two Hex bytes per each Timeslot (TS) in the range of [00 FF]. For example, ODU4 MSI under PT=0x21 will be reported as 160 HEX Bytes for 80 TS.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.21 |
tnOthOdukTtpCndRes.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.22 |
tnOthOdukTtpCmEmphasis.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.23 |
tnOthOdukTtpManualOduPtf.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.24 |
tnOthOdukTtpCsfType.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.25 |
tnOthOdukOduChanPools.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.26 |
tnOthOdukMaxTribNumber.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.27 |
tnOthOdukActualTribNumber.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.28 |
tnOthOdukOduCTypeNMValue.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.29 |
tnOthOdukTtpDegPeriodSpecifies the detection time unit for a signal degrade defect on the ODU. The signal degrade detection time window is specified by tnOthOdukTtpDegPeriod multiplied by tnOthOdukTtpDegM.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.30 |
tnOthOdukTtpMsimRespControl whether an MSIM consequent action is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.4.1.31 |
tnOthOdukNimAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.5 |
tnOthOdukNimTable. SEQUENCE OF TnOthOdukNimEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.6 |
tnOthOdukNimEntry. TnOthOdukNimEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1 |
tnOthOdukNimDirectionalitySpecifies the monitor point for the ODUk Path non-intrusive monitoring function. The value source(2) is not allowed if the corresponding instance of tnOthOdukDirectionality has the value sink(1), and the value sink(1) is not allowed if the corresponding instance of tnOthOdukDirectionality has the value source(2). Either the value sink(1) or source(2) is allowed if the corresponding instance of tnOthOdukDirectionality has the value bidirectional(3). The value sink(1) means monitoring at the sink direction path signal of the ODUk CTP. The value source(2) means monitoring at the source direction path signal of the ODUk CTP. Monitoring the source direction of an ODUk CTP is necessary in those cases where the ODUk CTP is at an SNCP (Subnetwork Connection Protection) end (e.g., see Figure I.1.2/G.874.1). If one would like to get the performance of the protected connection, one cannot use the NIM function at both ODUk CTP sinks (before the matrix), instead one should monitor the signal at the source ODUk CTP after the matrix. Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.1 |
tnOthOdukNimDapiExpectedThe DAPI bytes expected by the receiver.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.2 |
tnOthOdukNimSapiExpectedThe SAPI expected by the receiver. This object has no effect when tnOthOdukNimTimDetMode has the value off(1).rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.3 |
tnOthOdukNimTraceIdentifierAcceptedThe actual trace identifier accepted. The value of this object is unspecified if tnOthOdukNimCurrentStatus has any of the bit positions oci(0), lck(1), or ssf(5) set or if tnOthOdukNimRowStatus has any value other than active(1). It consists of three parts: - RXSAPI is the fist 16 octets (TTI[0]-TTI[15]) - RXDAPI is the second 16 octets (TTI[16]- TTI[31]) - RXOS (operator specific) is the last 32 octets (TTI[32]- TTI[63]). TTI[0] (i.e., SAPI[0]) and TTI[16] (i.e., DAPI[0]) shall be fixed to all 0s.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.4 |
tnOthOdukNimTimDetModeIndicates the mode of the Trace Identifier Mismatch (TIM) Detection function.rw AluWdmTimDetMode (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.5 |
tnOthOdukNimTimActEnabledIndicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.6 |
tnOthOdukNimTtiStatusODUk Nim TTI status.ro AluWdmTtiStatus (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.7 |
tnOthOdukNimDegThrSpecifies the burst threshold as a number of errored blocks on the ODU layer. A second is declared as good if the number of detected errored blocks within one second is less than tnOthOdukNimDegThr, otherwise the second is declared as bad second.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.8 |
tnOthOdukNimDegMSpecifies the number of consecutive bad seconds (tnOthOdukNimDegM* tnOthOdukNimDegPeriod) to be detected before declaring a signal degrade defect on the ODU. The defect is cleared if tnOthOdukNimDegM* tnOthOdukNimDegPeriod consecutive good seconds are detected. Current configurable range: 1 to 10.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.9 |
tnOthOdukNimPomThis object is used to model the activateNim and deactivateNim operations of an OTUk_CTP for non-intrusive monitoring control as defined in G.874.1. Setting this object to true implies activateNim, and setting this object to false implies deactivateNim.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.11 |
tnOthOdukNimDapiAcceptedThe DAPI bytes received.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.12 |
tnOthOdukNimOsAcceptedThe OS bytes received.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.13 |
tnOthOdukNimDegPeriodSpecifies the detection time unit for a signal degrade defect on the ODU. The signal degrade detection time window is specified by tnOthOdukNimDegPeriod multiplied by tnOthOdukNimDegM.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.6.1.14 |
tnOthGcc12AttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.7 |
tnOthGcc12Table. SEQUENCE OF TnOthGcc12Entry .1.3.6.1.4.1.7483.2.2.4.10.2.1.8 |
tnOthGcc12Entry. TnOthGcc12Entry .1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1 |
tnOthGcc12CodirectionalIndicates the directionality of the GCC12 termination with respect to the associated ODUk CTP. The value true(1) means that the sink part of the GCC12 extracts COMMS data from the signal at the input to the ODUk CTP sink and the source part of the GCC12 inserts COMMS data into the signal at the output of the ODUk CTP source. The value false(2) means that the sink part of the GCC12 extracts COMMS data from the signal at the output of the ODUk CTP source and the source part of the GCC12 inserts COMMS data into the signal at the input of the ODUk CTP sink. This attribute may assume either value when the corresponding instance of tnOthOdukTtpPresent has the value false(2). When the value of the corresponding instance of tnOthOdukTtpPresent is true(1) then the only value allowed for this attribute is true(1). TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1.1 |
tnOthGcc12GccAccessIndicates the GCC access represented by the entity. Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1.2 |
tnOthGcc12RowStatusThis columnar object is used for creating and deleting a conceptual row of the tnOthGcc12 config table. It is used to model the addGCC12Access and removeGCC12Access operations of an ODUk CTP or ODUk TTP for GCC12 access control as defined in G.874.1. Setting RowStatus to createAndGo or createAndWait implies addGCC12Access. Setting RowStatus to destroy implies removeGCC12Access.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1.3 |
tnOthGcc12GccPassThroughControls whether the selected GCC overhead bytes are passed through or modified. The value true(1) means that the selected GCC overhead bytes are passed through unmodified from the ODUk CTP input to the ODUk CTP output. The value false(2) means that the selected GCC overhead bytes are set to zero at the ODUk CTP output after the extraction of the COMMS data. This object has no effect if the corresponding instance of tnOthOdukTtpPresent has the value true(1). The value of this object may not be changed when tnOthGcc12RowStatus has the value active(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1.4 |
tnOthGcc12ApplicationIndicates the application transported by the GCC12 entity. Example applications are ECC, User data channel. The value of this object may not be changed when tnOthGcc12RowStatus has the value active(1).rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.8.1.5 |
tnOthOdukTAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.9 |
tnOthOdukTTable. SEQUENCE OF TnOthOdukTEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.10 |
tnOthOdukTEntry. TnOthOdukTEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1 |
tnOthOdukTRowStatusThis columnar object is used for creating and deleting a conceptual row of tnOthOdukTable. It is used to model the addTCM and removeTCM operations of an ODUk_CTP or ODUk_TTP for Tandem connection monitoring as defined in ITU-T G.874.1. Setting RowStatus to createAndGo or createAndWait implies addTCM. Setting RowStatus to destroy implies removeTCM.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.3 |
tnOthOdukTTcmModeIndicates the TCM termination mode. There are two valid values, termination or non-intrusive monitoring (NIM). An TCM entity is created either in termination mode or in NIM mode.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.4 |
tnOthOdukTPosSeqIndicates the relative position of the TCM monitor point. The lower the position sequence, the closer the TCM monitor point to the client/matrix. This means that the consequent action of the lower numbered position sequence TCM monitor point affects the higher numbered position sequence TCM monitor point. It is 1 by default.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.5 |
tnOthOdukTAdminStatusODUk TCM administrative state. It is used to suppress the alarms the ODU TCM entity.rw AluWdmOdukStatus (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.6 |
tnOthOdukTSapiTransmittedThe SAPI bytes in trace identifier transmitted in the TCM layer. This object is applicable when tnOthOdukDirectionality has the value source(2) or bidirectional(3). It must not be instantiated in rows where tnOthOdukDirectionality is equal to sink(1). TXSAPI is the fist 16 Octets (TTI[0]-TTI[15]) TTI[0] (i.e., SAPI[0]) shall be fixed to all 0s. This object is applicable when tnOthOdukTTcmMode is equal to Termination.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.7 |
tnOthOdukTSapiExpectedThe SAPI expected by the receiver. This object has no effect when tnOthOdukTTimDetMode is equal to off(1).rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.8 |
tnOthOdukTTraceIdentifierAcceptedThe actual trace identifier accepted. This object is applicable only to the following three cases. (i) tnOthOdukDirectionality has the value bidirectional(3), or (ii) tnOthOdukDirectionality has the value sink(1) and tnOthOdukTCodirectional has the value true(1), or (iii) tnOthOdukDirectionality has the value source(3) and tnOthOdukTCodirectional has the value false(2). It must not be instantiated in rows for all other cases. The value of this object is unspecified when tnOthOdukTCurrentStatus indicates a near-end defect (i.e., oci(0), lck(1), ssf(5)) that prevents extraction of the trace message. It consists of the following three parts: - RXSAPI is the fist 16 Octets (TTI[0]-TTI[15]) - RXDAPI is the second 16 octets (TTI[16]-TTI[31]) - RXOS (operator specific) is the last 32 octets (TTI[32]-TTI[63]). TTI[0] (i.e., SAPI[0]) and TTI[16] (i.e., DAPI[0]) shall be fixed to all 0s.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.9 |
tnOthOdukTTimDetModeIndicates the mode of the Trace Identifier Mismatch (TIM) Detection function.rw AluWdmTimDetMode (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.10 |
tnOthOdukTTimActEnabledIndicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. This object has no effect when tnOthOdukTTimDetMode is equal to off(1).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.11 |
tnOthOdukTTtpTtiStatusODUkT TTI status.ro AluWdmTtiStatus (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.12 |
tnOthOdukTAisOnDefDetermines if consequent action of sending AIS will be taken on the TCM defect. enable enables Consequent Action of TCM defect, while disable disables Consequent Action of TCM defect. This object is applicable when tnOthOdukTTcmMode is equal to termination.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.13 |
tnOthOdukTLtcRespLTC defect Response. This parameter determines whether a LTC defect contributes to the Consequent Action or not. It is disabled(2) by default. This object is applicable when tnOthOdukTTcmMode is equal termination.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.14 |
tnOthOdukTOhAddDetermines if the provisioned TCM Overhead is inserted or not. It is false by default. This object is applicable when tnOthOdukTTcmMode is equal to termination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.15 |
tnOthOdukTOhRmvDetermines if the received TCM Overhead is discarded or not. It is false by default. This object is applicable when tnOthOdukTTcmMode is equal to termination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.16 |
tnOthOdukTcmIfIndexA unique index, greater than zero, for each ODU entity. This is the high-order index part. ------------------------------------------------------ | Bit31-Bit24 | Bit23-Bit16 | Bit15-Bit3 | Bit2-Bit0 | --------------+-------------+------------+------------ | 8 bits | 8 bits | 13 bits | 3 bits | --------------+-------------+------------+------------ | shelf | slot | HO-ODU | Reserved | | | | Number | as 0 | ------------------------------------------------------ Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.17 |
tnOthOdukTcmIfIndexLoA unique index, greater than zero, for each ODU entity. This is the low-order index part. --------------------------------------------------------- | Bit31-Bit23 | Bit22-Bit18 | Bit17-Bit16 | Bit15-Bit10 | --------------+-------------+-------------+-------------+ | 9 bits | 5 bits | 2 bits | 6 bits | --------------+-------------+---------------+-----------+ | LO-ODU ID | HO-ODU | Reserved | Container | | | ODU Type | | Type | --------------------------------------------------------- ------------------------------------------ | Bit9-Bit7 | Bit6-Bit5 | Bit4-Bit0 | ------------+---------------+-----------+ | 3 bits | 2 bits | 5 bits | ------------+---------------+------------ | TCM Level | TCM Direction | LO-ODU | | (1-6) | (AM=1, BM=2) | ODU Type | ----------------------------------------- Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.18 |
tnOthOdukTDegThrSpecifies the burst threshold as a number of errored blocks on the ODU layer. A second is declared as good if the number of detected errored blocks within one second is less than tnOthOdukTDegThr, otherwise the second is declared as bad second.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.19 |
tnOthOdukTDegMSpecifies the number of consecutive bad seconds (tnOthOdukRTDegM* tnOthOdukTDegPeriod) to be detected before declaring a signal degrade defect on the ODU. The defect is cleared if tnOthOdukTDegM* tnOthOdukTDegPeriod consecutive good seconds are detected. Current configurable range: 1 to 10.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.20 |
tnOthOdukTDapiAcceptedThe DAPI bytes received.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.21 |
tnOthOdukTDapiExpectedThe DAPI bytes expected by the receiver.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.22 |
tnOthOdukTDapiTransmittedThe DAPI bytes transmitted. The TTI[17] to TTI[31] contain the 15-character destination access point identifie (DAPI).rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.23 |
tnOthOdukTOsAcceptedThe OS bytes received.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.24 |
tnOthOdukTOsTransmittedThe OS bytes transmitted. The TTI[32] to TTI[63] contain the 32-character Operator Specific (OS).rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.25 |
tnOthOdukTTcmAlmProfName.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.26 |
tnOthOdukTcmOperStatusODUk TCM Operational state.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.27 |
tnOthOdukTcmMgracdIndicates if managed by CP, MGNPLN, shared by both or free.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.28 |
tnOthOdukTcmincstatDisplays the accepted TCM stat byte value including status information.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.29 |
tnOthOdukTcmOperationalCapabilityODUk TCM Operational Capability.ro TropicOperationalCapabilityType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.30 |
tnOthOdukTcmStateQualifierIndicates the state qualifier (i.e., the secondary state) of the ODUk TCM State.ro TropicStateQualifierType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.31 |
tnOthOdukTcmDMInvokeInvokes a single delay measurement by toggling once the DM bit.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.32 |
tnOthOdukTcmDMTimeStampTime-stamp for the reported delay measurement.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.33 |
tnOthOdukTcmDMCMEPModeConnection Monitoring End Point Mode defined for delay measurement.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.34 |
tnOthOdukTcmDMStatusDelay Measurement Status.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.35 |
tnOthOdukTcmDMTimeTime for the reported delay measurement.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.36 |
tnOthOdukTDegPeriodSpecifies the detection time unit for a signal degrade defect on the ODU. The signal degrade detection time window is specified by tnOthOdukTDegPeriod multiplied by tnOthOdukTDegM.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.10.1.37 |
tnOthOdukXcAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.13 |
tnOthOdukXcTable. SEQUENCE OF TnOthOdukXcEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.14 |
tnOthOdukXcEntry. TnOthOdukXcEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1 |
tnOthOdukXcSrcIfIndexThe interface index of the ODUk crossconnect source, high-order index part. Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.1 |
tnOthOdukXcSrcIfIndexLoThe interface index of the ODUk crossconnect source, low-order index part. Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.2 |
tnOthOdukXcDestIfIndexThe interface index of the ODUk crossconnect destination, high-order index part. Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.3 |
tnOthOdukXcDestIfIndexLoThe interface index of the ODUk crossconnect destination, low-order index part. Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.4 |
tnOthOdukXcRowStatusCurrently all entries have a row status of active. Sets are permitted for the following values: - active(1) - createAndGo(4) - destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.5 |
tnOthOdukXcIdContains shelf id and the connection id assigned by the system. ------------------+------------------ | Bit 31 - Bit 24 | Bit 23 - Bit 0 | ------------------+------------------ | 8 Bit | 24 Bit | ------------------+------------------ | Shelf ID | XCID or GroupID | ------------------+------------------.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.6 |
tnOthOdukXcRateIndicates the ODUk entity rate.rw AluWdmOthOdukXcRate (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.7 |
tnOthOdukXcBidirectionalIndicates if this connection is unidirectional or bidirectional.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.8 |
tnOthOdukXcNameThe description of the ODUk XC.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.9 |
tnOthOdukXcProtectionStateThe ODUk XC protection state.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.10 |
tnOthOdukXcTopologyThe ODUk XC topology expressed as port ifindex.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.11 |
tnOthOdukXcResize.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.12 |
tnOthOdukXcNewFromTsList.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.13 |
tnOthOdukXcNewToTsList.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.14 |
tnOthOdukXcYangConnectionName.ro SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.15 |
tnOthOdukXcCpConnId.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.10.2.1.14.1.16 |
tnOthOdukApsGroupAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.15 |
tnOthOdukApsGroupTable. SEQUENCE OF TnOthOdukApsGroupEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.16 |
tnOthOdukApsGroupEntry. TnOthOdukApsGroupEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1 |
tnOthOdukApsToIfIndexThe interface Index (high-order part) of the ODUk entity within the SNCP. Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.1 |
tnOthOdukApsToIfIndexLoThe interface Index (low-order part) of the ODUk entity within the SNCP. Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.2 |
tnOthOdukApsFromedIfIndexThe interface Index (high-order part) of the ODUk entity in the working leg.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.3 |
tnOthOdukApsFromedIfIndexLoThe interface Index (low-order part) of the ODUk entity in the working leg.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.4 |
tnOthOdukApsFromingIfIndexThe interface Index (high-order part) of the ODUk entity in the protection leg.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.5 |
tnOthOdukApsFromingIfIndexLoThe interface Index (low-order part) of the ODUk entity in the protection leg.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.6 |
tnOthOdukApsActionThe action command to control the APS group. Its value has an effect on the status of entries in tnOthOdukXcTable, tnOthOdukApsGroupTable, and tnOthOdukMemberTable.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.7 |
tnOthOdukApsDescrDescription for the APS group.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.8 |
tnOthOdukApsModeThe protection type of the APS group. sncn - subnetwork connection with non-intrusive monitoring. sncnc - subnetwork connection based on ODUk client signal with non-intrusive monitoring. snci - subnetwork connection with inherent monitoring. sncs - subnetwork connection protection with sublayer monitoring.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.9 |
tnOthOdukApsRevertThe revertive attribute of the APS group.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.10 |
tnOthOdukApsDirectionThe protection direction of the APS Group.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.11 |
tnOthOdukApsXcBidirectionalIt indicates the connection direction of the APS group.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.12 |
tnOthOdukApsWaitToRestoreThe wait-to-restore time for the revertive mode automatic switching. The values are in minutes. Current configurable range: 1 to 15.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.13 |
tnOthOdukApsHoldOffTimerHold Off Time for automatic switching. Current configurable range: 0 to 10000.rw Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.14 |
tnOthOdukApsGroupK1K2TransThis attribute is used to display the possible mapping of switch command and switch status to K1/K2 bytes.rw ApsK1K2 (TROPIC-L1SERVICE-MIB) .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.15 |
tnOthOdukApsGroupMethodThe protection method of the working leg. Default is pnim for sncn and sncnc, and padapt for snci.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.16 |
tnOthOdukApsPingMethodThe protection method of the protection leg. Default is pnim for sncn and sncnc, and padapt for snci.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.17 |
tnOthOdukApsSdEnableIndicates whether or not Signal Degrade is used for protection switching.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.18 |
tnOthOdukApsCurrentStatusThe status of the APS group.ro Bits .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.19 |
tnOthOdukApsGroupIDContains shelf ID and the ID assigned to the APS group by the system. ------------------+------------------ | Bit 31 - Bit 24 | Bit 23 - Bit 0 | ------------------+------------------ | 8 Bit | 24 Bit | ------------------+------------------ | Shelf ID | GroupID | ------------------+------------------.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.20 |
tnOthOdukApsOduXcRateIndicates the ODUk XC rate in the APS group.ro AluWdmOthOdukXcRate (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.21 |
tnOthOdukApsGroupCurrentStatusCurrently active switch request for a SNCP.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.22 |
tnOthOdukApsSwitchCmdThe switch command applied to the APS group.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.23 |
tnOthOdukApsActSideActive side of the working ODUk entity in the APS group.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.24 |
tnOthOdukApsFromedSfdThe status of the working ODUk entity in the APS group.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.25 |
tnOthOdukApsFromingSfdThe status of the protection ODUk entity in the APS group.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.26 |
tnOthOdukApsCascadedUseIndicates whether or not protection is used in cascaded configuration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.27 |
tnOthOdukApsReSize.rw Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.28 |
tnOthOdukApsNewFromedTsList.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.29 |
tnOthOdukApsNewFromingTsList.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.30 |
tnOthOdukApsCpConnId.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.10.2.1.16.1.31 |
tnOthOdukMemberAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.17 |
tnOthOdukMemberTable. SEQUENCE OF TnOthOdukMemberEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.18 |
tnOthOdukMemberEntry. TnOthOdukMemberEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1 |
tnOthOdukApsMemberIfIndexThe interface Index (high-order part) for each ODU entity. Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.1 |
tnOthOdukApsMemberIfIndexLoThe interface Index (low-order part) for each ODU entity. Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.2 |
tnOthOdukApsMemberRowStatusChanging the row status is currently not supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.3 |
tnOthOdukApsMemberConfigNumber.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.4 |
tnOthOdukApsMemberSwitchThe switch command applied to the member of the APS group.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.5 |
tnOthOdukApsMemberCurrentStatusThe status of the ODUk entity in the APS group.ro Bits .1.3.6.1.4.1.7483.2.2.4.10.2.1.18.1.6 |
tnOthOdukApsGroupIdAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.19 |
tnOthOdukApsGroupIdTable. SEQUENCE OF TnOthOdukApsGroupIdEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.20 |
tnOthOdukApsGroupIdEntry. TnOthOdukApsGroupIdEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.20.1 |
tnOthOdukApsGroupIdToIfIndexThe interface index (high-order part) of the ODUk entity with the APS group.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.20.1.1 |
tnOthOdukApsGroupIdToIfIndexLoThe interface index (low-order part) of the ODUk entity with the APS group.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.20.1.2 |
tnOthOdukOptsgAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.21 |
tnOthOdukOptsgTable. SEQUENCE OF TnOthOdukOptsgEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.22 |
tnOthOdukOptsgEntry. TnOthOdukOptsgEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.22.1 |
tnOptsgStructThe transmit OPTSG payload structure value.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.22.1.1 |
tnIncOptsgStructThe received OPTSG payload structure value. It is retrieved from the received OPTSG bytes.ro SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.22.1.2 |
tnOthOdukDMConfigAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.23 |
tnOthOdukDMConfigTable. SEQUENCE OF TnOthOdukDMConfigEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.24 |
tnOthOdukDMConfigEntry. TnOthOdukDMConfigEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.24.1 |
tnOthOdukDMConfigCMEPModeConnection Monitoring End Point Mode defined for delay measurement on the specified ODUk entity.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.24.1.1 |
tnOthOdukDMConfigEnableThis attribute is used to enable or disable the DM function.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.24.1.2 |
tnOthOdukDMConfigInvokeInvokes a single delay measurement by toggling once the DM bit.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.24.1.3 |
tnOthOdukDMInfoAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.25 |
tnOthOdukDMInfoTable. SEQUENCE OF TnOthOdukDMInfoEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.26 |
tnOthOdukDMInfoEntry. TnOthOdukDMInfoEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.26.1 |
tnOthOdukDMInfoCurrentStatusIndicates whether this DM test is valid.ro AluWdmDMInfoCurrentStatus (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.26.1.1 |
tnOthOdukDMInfoCurrentValueReports the DM value in 10**(-7) seconds in the current Interval.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.26.1.2 |
tnOthOdukDMInfoTimeStampTime-stamp for the reported delay measurement.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.26.1.3 |
tnOthOdukIncFtflInfoAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.27 |
tnOthOdukIncFtflInfoTable. SEQUENCE OF TnOthOdukIncFtflInfoEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.28 |
tnOthOdukIncFtflInfoEntry. TnOthOdukIncFtflInfoEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1 |
tnOthOdukIncFtflFwTypeIDODUk incoming forward fault type and fault location (FTFL) type ID.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1.1 |
tnOthOdukIncFtflFwOperIDODUk incoming forward FTFL operator ID.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1.2 |
tnOthOdukIncFtflBwTypeIDODUk incoming backward FTFL type ID.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1.3 |
tnOthOdukIncFtflBwOperIDODUk incoming backward FTFL operator ID.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1.4 |
tnOthOdukIncFtflExpODUk incoming exp (experimental).ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.28.1.5 |
tnOthOdukEncryptionAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.29 |
tnOthOdukEncryptionTable. SEQUENCE OF TnOthOdukEncryptionEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.30 |
tnOthOdukEncryptionEntry. TnOthOdukEncryptionEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.30.1 |
tnOthOdukEncryptionOperateKeySwitchRequest the port to switch to the standby encryption key.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.30.1.1 |
tnOthOdukEncryptionStateEncryption State. true - on false - off.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.30.1.2 |
tnOthOdukEncryptionNextKeyNext encryption key to use.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.30.1.3 |
tnOthOdukEncryptionWKATThe WKAT string used to authenticate the far end and validate the keys are correct.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.30.1.4 |
tnOthOdukEncryptionCurrentKeyInfoRead current key info.ro SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.30.1.5 |
tnOthOdukEncryptionNextKeyInfoRead next key info.ro SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.10.2.1.30.1.6 |
tnOthOdukEncryptionEipcchUsed to configure the channel to be used for Encryption Interface Protocol for Communication.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.30.1.7 |
tnOduChanPoolTableTable of OduChanPool attributes. SEQUENCE OF TnOduChanPoolEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.31 |
tnOduChanPoolEntry. TnOduChanPoolEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.31.1 |
tnOduChanPoolIndex. Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.31.1.1 |
tnOduChanPoolPortListOrdered list of port numbers associated with the pool.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.31.1.2 |
tnOduChanPoolOTUIdListOrdered list of otu-ids associated with the pool.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.31.1.3 |
tnOduChanPoolNumberOfChanDefines the overall number of available channel for a pool.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.31.1.4 |
tnOduChanPoolNumberOfResChanDefines the number of reserved channels per OTU4.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.31.1.5 |
tnOduChanPoolResChanListList of provisioned OTU facilities together the reserved channel information.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.10.2.1.31.1.6 |
tnOduChanPoolNumberOfSharedChanThe number of allocated channels as shared resource.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.31.1.7 |
tnOduChanPoolNumberOfFreeChanThe number of channels free for shared allocation.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.31.1.8 |
tnOduPrbsAttributeTotal.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.32 |
tnOduPrbsTable. SEQUENCE OF TnOduPrbsEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.33 |
tnOduPrbsEntry. TnOduPrbsEntry .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1 |
tnOduPrbsIfIndex. Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.1 |
tnOduPrbsIfIndexLo. Unsigned32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.2 |
tnOduPrbsPatternPrbs pattern which is used for the test signal prbs31 - a PRBS31 test signal invprbs31 - an inverted PRBS31 test signal prbs11 - a PRBS11 test signal.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.3 |
tnOduPrbsPositionposition where the test signal is applied bm - test signal is applied with position Before Matrix.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.4 |
tnOduPrbsTestModeMode of the test signal. If testmode is set to enabled, a new measurement for the test signal starts with all-zero counter values as initial value. disabled - test signal insertion and monitoring are disabled enabled - test signal insertion and monitoring are enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.5 |
tnOduPrbsInSyncStateIn Sync State.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.6 |
tnOduPrbsInSyncSecondsIn Sync Seconds.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.7 |
tnOduPrbsNoSyncSecondsNo Sync Seconds.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.8 |
tnOduPrbsTseCounterTSE counter.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.9 |
tnOduPrbsTseRatioTSE bit error ratio, ranges 0 to 4000.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.10 |
tnOduPrbsTseTotalBitsNumber of total bits for a test sequence.ro Counter64 .1.3.6.1.4.1.7483.2.2.4.10.2.1.33.1.11 |