TROPIC-ACCESSPORT-MIB
AI MIB Summary
The TROPIC-ACCESSPORT-MIB defines the management interface for DWDM system ports on Tropic Networks access equipment, exposing attributes such as port status, optical power levels, and signal quality metrics for performance monitoring and fault isolation.
DWDM system port MIB attributes.
Main OID:
tnAccessPortMibModules.1.3.6.1.4.1.7483.1.1.2.2.4.1
81
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
81 total| Object Name |
|---|
tnAccessPortMibModulesDWDM system port MIB attributes. MODULE-IDENTITY .1.3.6.1.4.1.7483.1.1.2.2.4.1 |
tnAccessPortConf OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.1.1 |
tnAccessPortGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.1.1.1 |
tnAccessPortGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.1.1.1.1 |
tnIfGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.1.1.1.2 |
tnSysTopologyGroup. Unknown .1.3.6.1.4.1.7483.2.2.4.1.1.1.3 |
tnAccessPortCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.1.1.2 |
tnAccessPortCompliance. Unknown .1.3.6.1.4.1.7483.2.2.4.1.1.2.1 |
tnAccessPortObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.1.2 |
tnAccessPortTableThe 1696R/1830 NE port table. SEQUENCE OF TnAccessPortEntry .1.3.6.1.4.1.7483.2.2.4.1.2.1 |
tnAccessPortEntryThe ports on a card. TnAccessPortEntry .1.3.6.1.4.1.7483.2.2.4.1.2.1.1 |
tnAccessPortDescrAccess port description.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.1 |
tnAccessPortStatusLEDColorThe color of the status LED.ro TropicLEDColorType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.2 |
tnAccessPortStatusLEDStateThe state of the status LED.ro TropicLEDStateType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.3 |
tnAccessPortOperationalCapability.ro TropicOperationalCapabilityType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.4 |
tnAccessPortStateQualifier.ro TropicStateQualifierType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.5 |
tnAccessPortFarEndAddressAccess port far end address.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.6 |
tnAccessPortFarEndIfIndexAccess port far end interface index.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.7 |
tnAccessPortFarEndTypeAccess port far end type.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.8 |
tnAccessPortDirectionAccess port direction. Setting the direction to unidirectionalRx will turn off the Tx laser, and suppress Tx alarms (including out Wavelength Tracker alarms). Setting the direction to unidirectionalTx will suppress Rx alarms (including in Wavelength Tracker alarms).rw Enumeration .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.9 |
tnAccessPortAINSIf the user has set Port AINS to true, the port admin state is set to up by the system. If the port admin state has been set up or down, Port AINS is set to false by the system, unless the user had specified admin up and Port AINS true. Disabling Port AINS against a client port of an OT card may result in disabling Port AINS against the line port of that OT card.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.10 |
tnAccessPortAINSDebounceTimeThis attribute must be set in multiples of 60s. It is equal to System AINS Debounce Time when Port AINS Use System Default is true. Setting the Port AINS Debounce Time and Port AINS Use System Default to true in the same set request is restricted. Current configurable range: 1m to 96h 0m.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.11 |
tnAccessPortUsingSysAINSDebounceTimeUsing System AINS Debounce Time. Sets with a value of false are restricted. The network operator must set Port AINS Debounce Time to some valid value to disable the use of System AINS Debounce Time. Setting the Port AINS Debounce Time and Port AINS Use System Default to true in the same set request is restricted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.12 |
tnAccessPortAINSDebounceTimeRemainingNumber of seconds until the Port AINS DebounceTime expires. If Port AINS is false or Port AINS Debounce Time is 0, the value of this attribute will be 0.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.13 |
tnAccessPortIsDomainEdgePortFor discriminating between ports that are internal to a network composed of 1830 and 1696R network elements and the ports that are at the edge of the network so that the user knows where it is correct to terminate end-to-end connections.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.14 |
tnAccessPortFarEndAddressConnFromAccess port far end address that points to this port.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.15 |
tnAccessPortFarEndIfIndexConnFromAccess port far end interface that points to this port.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.16 |
tnAccessPortFarEndTypeConnFromAccess port far end type.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.17 |
tnAccessPortExtAmpIpAddressInThe IP address of an external amplifier connected to this port. This attribute is applicable to the line port of an LD card and is reserved for use with a RAMAN module.rw IpAddress .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.18 |
tnAccessPortExtAmpIpAddressOutThe IP address of an external amplifier connected from this port. This attribute is applicable to the line port of an LD card and is reserved for use with an EDFA module.rw IpAddress .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.19 |
tnAccessPortWtocmConnLossThe insertion loss between the LD card MON port and the WTOCM input port. Current configurable range: 0 to 1500.rw Integer32 UNITS "mB" .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.20 |
tnAccessPortWtocmConnAddressLD card port connected to WTOCM input port in transmit direction.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.21 |
tnAccessPortOppDirectionPortAddressAddress of opposite direction port when the TX and RX directions are split between two ports.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.22 |
tnAccessPortIsValidInternalOTSXcEndpointIndicates if this is an end point of internal OT cross connect.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.23 |
tnAccessPortWtDomainNumberThe numbered domain used for WT key selection for add XCs to this port; applies to external line facing ports. Current configurable range: -1 to 19.rw Integer32 (-1..19) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.24 |
tnAccessPortHasMpoConnectorIndicates if the logical port underlies a multi-fiber connector.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.25 |
tnAccessPortMpoConnectorPortOutIfIndexProvides the shelf/slot/port of the multi-fiber connector interface corresponding to this logical port in the out direction. Value of 0 indicates no MPO port.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.26 |
tnAccessPortMpoConnectorPortInIfIndexProvides the shelf/slot/port of the multi-fiber connector interface corresponding to this logical port in the in direction. Value of 0 indicates no MPO port.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.27 |
tnAccessPortIsMpoIndicates if the port is itself a MPO port. Retrievable through SNMP for all ports, managed and MPO. True: The port is the port for the MPO connector. False: The port is not a port for a MPO connector, it is a managed port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.28 |
tnAccessPortMonOcmConnAddressPort monitored by input or connected from output.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.29 |
tnAccessPortAlmProfName.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.30 |
tnAccessPortmfcTemperatureThe Ambient temperature applies to the sensor port of the MultiFunctional card.ro Integer32 UNITS "Celsius" .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.31 |
tnAccessPortmfcNominalPressureThe nominal pressure applies to the sensor port of the MultiFunctional card.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.32 |
tnAccessPortmfcDifferentialPressureThe differential pressure applies to the sensor port of the MultiFunctional card.ro Integer32 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.33 |
tnAccessFilterAmbientTemperatureCurrent Ambient Temperature.ro Integer32 UNITS "Celsius" .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.34 |
tnAccessFilterPressureCurrent Pressure Value.ro Integer32 UNITS "Pa" .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.35 |
tnAccessFilterRecordedRecorded calibration on clean filter.ro Integer32 UNITS "Pa" .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.36 |
tnAccessFilterCalibratedRecent filter calibration value.ro Integer32 UNITS "Pa" .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.37 |
tnAccessFilterAltitudeAltitude used in above calibration.ro Integer32 UNITS "kilometers" .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.38 |
tnAccessFilterRecordTimeRecorded calibration time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.39 |
tnAccessFilterCalibrateTimeRecent calibration time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.40 |
tnAccessFilterScheduledTimeNext scheduled time for calibration.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.41 |
tnAccessPortL2FarEndIfIndexAccess port Layer 2 far end interface index.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.42 |
tnAccessPortL2FarEndMacAddressAccess port Layer 2 far end MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.43 |
tnAccessPortDirectionCapabilityAccess port direction capabilities.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.44 |
tnAccessPortCpriMappingTypeSpecifies the mapping type to map CPRI signals into Ethernet packets. tunneling - map CPRI 10B or 66B line codes are encapsulted into RoE packets. structureAware - map CPRI basic frames in 8B or 64B symbols removing the line coding and (if any) scrambling and FEC, are encapsulated into RoE packets. structureAwareControl - map CPRI/OBSAI AxC and Control signals are extracted and excapsulated into separate flows of RoE packets.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.45 |
tnAccessPortFecTypeSpecifies the Forward Error Correction type on the interface port. Enter this keyword without option to display the current value. fectype = rsfec is allowed only for 25gbe, 100gbe, CPRI-8, CPRI-10 with 64B/66B line coding.rw AluWdmFecMode (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.46 |
tnAccessPortFecBypassIndParameter FecBypassInd (FEC Bypass Indication) determines whether the corresponding option as defined in IEEE 802.3 is set or not. If enabled, this implies: - dHISER defect detection based on the number of RS-FEC symbol errors is enabled - LFI is inserted as a consequent action if dHISER is present. If fectype=nofec is provisioned then this parameter has no effect/impact. It is applied for 25gbe, 100gbe, CPRI-8, CPRI-10 with 64B/66B line coding.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.47 |
tnAccessPortCpriRoleThe master/slave role for CPRI interface.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.48 |
tnAccessPortAseMode.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.49 |
tnAccessPortRole.ro Enumeration .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.50 |
tnAccessPortFacilityDescriptorName.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.51 |
tnAccessPortFacilityDescriptorDesc.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.52 |
tnAccessPortFacilityDescriptorCirId.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.53 |
tnAccessPortAlienWavebank.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.54 |
tnAccessPortModuleReset.rw Enumeration .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.55 |
tnAccessPortFacilityDesCustLifeCycleStateCustomer life cycle state.rw SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.56 |
tnAccessPortSummaryStatusLEDColorThe color of the summary status LED.ro TropicLEDColorType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.57 |
tnAccessPortSummaryStatusLEDStateThe state of the summary status LED.ro TropicLEDStateType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.58 |
tnIfTable. SEQUENCE OF TnIfEntry .1.3.6.1.4.1.7483.2.2.4.1.2.2 |
tnIfEntry. TnIfEntry .1.3.6.1.4.1.7483.2.2.4.1.2.2.1 |
tnIfPhysicalLocation.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.1 |
tnIfTypeIn a set request, value default indicates that the NE assigns the port automatically, if possible. A value of default will not be returned to the network operator. If tnIfType is set to unassigned and ifAdminStatus has also been set, the set request will be failed back to the network operator.rw AluWdmTnIfType (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.2 |
tnIfSupportedTypesThe supported types.ro Bits .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.3 |
tnIfSupportedTypesAlternateThe supported types as an octet string.ro OCTET STRING .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.4 |
tnIfForceAdminStatusSetting this attribute to execute will force an ifAdminStatus change. This works only for an ifAdminStatus of down. When queried, this attribute returns a value of noCmd.rw TnCommand (TROPIC-TC) .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.5 |
tnIfnumofTimeSlotsThe number of time slot if tnIfType is oduflex. If tnIfType is non-Oduflex, tnIfnumofTimeSlots is always zero.ro Unsigned32 .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.6 |
tnIfAlmProfName.rw OCTET STRING .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.7 |
tnAccessPortScalarObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.1.2.3 |
tnSysTopology OBJECT IDENTIFIER .1.3.6.1.4.1.7483.2.2.4.1.2.3.1 |
tnSysTopologyAuditWhen read, this attribute will return the result of an audit of the physical topology of the network element. It will have the following format: <n>:<ifIndex 1>:<ifIndex 2>: ... <ifIndex n> For example, if there is bad topology info associated with locations 1/3A/1 and 1/5A/2, the value of this attribute will be as follows: 2:16974080:17105408 If there are no topology issues, the value of this attribute will be as follows: 0ro SnmpAdminString .1.3.6.1.4.1.7483.2.2.4.1.2.3.1.1 |