TRIP-MIB
AI MIB Summary
TRIP-MIB monitors Telephony Routing over IP (TRIP) location servers to track inter-administrative route reachability advertisements and associated policy attributes. It provides visibility into TRIP session states, route attributes, and the reachability status of telephony destinations exchanged between LS entities.
The MIB module describing Telephony Routing over IP (TRIP). TRIP is a policy driven inter-administrative domain protocol for advertising the reachability of telephony destinations between location servers (LS), and for advertising attributes of the routes to those destinations. Copyright (C) The Internet Society (2004). This version of this MIB module is part of RFC 3872, see the RFC itself for full legal notices.
Main OID:
tripMIB.1.3.6.1.2.1.116
125
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
125 total| Object Name |
|---|
tripMIBThe MIB module describing Telephony Routing over IP (TRIP). TRIP is a policy driven inter-administrative domain protocol for advertising the reachability of telephony destinations between location servers (LS), and for advertising attributes of the routes to those destinations. Copyright (C) The Internet Society (2004). This version of this MIB module is part of RFC 3872, see the RFC itself for full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.116 |
tripMIBNotifications OBJECT IDENTIFIER .1.3.6.1.2.1.116.0 |
tripConnectionEstablishedThe TRIP Connection Established event is generated when the TRIP finite state machine enters the ESTABLISHED state. NOTIFICATION-TYPE .1.3.6.1.2.1.116.0.1 |
tripConnectionDroppedThe TRIP Connection Dropped event is generated when the TRIP finite state machine leaves the ESTABLISHED state. NOTIFICATION-TYPE .1.3.6.1.2.1.116.0.2 |
tripFSMThe trip FSM Event is generated when any error is detected by the TRIP Finite State Machine. NOTIFICATION-TYPE .1.3.6.1.2.1.116.0.3 |
tripOpenMessageErrorErrors detected while processing the OPEN message. NOTIFICATION-TYPE .1.3.6.1.2.1.116.0.4 |
tripUpdateMessageErrorErrors detected while processing the UPDATE message. NOTIFICATION-TYPE .1.3.6.1.2.1.116.0.5 |
tripHoldTimerExpiredThe system does not receive successive messages within the period specified by the negotiated Hold Time. NOTIFICATION-TYPE .1.3.6.1.2.1.116.0.6 |
tripConnectionCollisionA pair of LSs tried to simultaneously to establish a transport connection to each other. NOTIFICATION-TYPE .1.3.6.1.2.1.116.0.7 |
tripCeaseA TRIP peer MAY choose at any given time to close its TRIP connection by sending this notification message. However, the Cease notification message MUST NOT be used when a fatal error occurs. NOTIFICATION-TYPE .1.3.6.1.2.1.116.0.8 |
tripNotificationErrGenerated if there is an error detected in a TRIP notification message sent with another cause. Note that the TRIP notification referred to in this object is not an SNMP notification, it is a specific message described in the TRIP specification. NOTIFICATION-TYPE .1.3.6.1.2.1.116.0.9 |
tripMIBObjects OBJECT IDENTIFIER .1.3.6.1.2.1.116.1 |
tripCfgTableThis table contains the common configuration objects applicable to all TRIP applications referenced by the applIndex. Each row represents those objects for a particular TRIP LS present in this system. The instances of TRIP LS's are uniquely identified by the applIndex. The objects in this table SHOULD be nonVolatile and survive a reboot. SEQUENCE OF TripCfgEntry .1.3.6.1.2.1.116.1.1 |
tripCfgEntryA row of common configuration. TripCfgEntry .1.3.6.1.2.1.116.1.1.1 |
tripCfgProtocolVersionThis object will reflect the version of TRIP supported by this system. It follows the same format as TRIP version information contained in the TRIP messages generated by this TRIP entity.ro TripProtocolVersion (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.1.1.1 |
tripCfgItadThe Internet Telephony Administrative domain (ITAD) of this LS.rw TripItad (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.1.1.2 |
tripCfgIdentifierThe object that identifies this TRIP Client.ro TripId (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.1.1.3 |
tripCfgAdminStatusThe desired TRIP state. up(1) : Set the application to normal operation. down(2): Set the application to a state where it will not process TRIP messages. Setting this object should be reflected in tripCfgOperStatus. If an unknown error occurs tripCfgOperStatus will return unknown(0).rw Enumeration .1.3.6.1.2.1.116.1.1.1.4 |
tripCfgOperStatusThe current operational state of the TRIP protocol. unknown(0): The operating status of the application is unknown. up(1): The application is operating normally, and is ready to process (receive and issue) TRIP requests and responses. down(2): The application is currently not processing TRIP messages. This occurs if the TRIP application is in an initialization state or if tripCfgAdminStatus is set to down(2). faulty(3): The application is not operating normally due to a fault in the system. If tripCfgAdminStatus is down(2) then tripOperStatus SHOULD be down(2). If tripAdminStatus is changed to up(1) then tripOperStatus SHOULD change to up(1) if there is no fault that prevents the TRIP protocol from moving to the up(1) state.ro Enumeration .1.3.6.1.2.1.116.1.1.1.5 |
tripCfgAddrIAddrTypeThe type of Inet Address of the tripAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.1.1.6 |
tripCfgAddrThe network address of the local LS that the peer connects to. The type of address depends on the object tripCfgAddrIAddrType. The type of this address is determined by the value of the tripCfgAddrIAddrType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.1.1.7 |
tripCfgPortThe local tcp/udp port on the local LS that the peer connects to.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.1.1.8 |
tripCfgMinItadOriginationIntervalThe minimum amount of time that MUST elapse between advertisement of the update message that reports changes within the LS's own ITAD.rw Unsigned32 .1.3.6.1.2.1.116.1.1.1.9 |
tripCfgMinRouteAdvertisementIntervalSpecifies minimal interval between successive advertisements to a particular destination from an LS.rw Unsigned32 .1.3.6.1.2.1.116.1.1.1.10 |
tripCfgMaxPurgeTimeIndicates the interval that the LS MUST maintain routes marked as withdrawn in its database.rw Unsigned32 .1.3.6.1.2.1.116.1.1.1.11 |
tripCfgDisableTimeIndicates the interval that the TRIP module of the LS MUST be disabled while routes originated by this LS with high sequence numbers can be removed.rw Unsigned32 .1.3.6.1.2.1.116.1.1.1.12 |
tripCfgSendReceiveModeThe operational mode of the TRIP entity running on this system.ro TripSendReceiveMode (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.1.1.13 |
tripCfgStorageThe storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.116.1.1.1.14 |
tripRouteTypeTableThe TRIP peer Route Type table contains one entry per supported protocol - address family pair. The objects in this table are volatile and are refreshed after a reboot. SEQUENCE OF TripRouteTypeEntry .1.3.6.1.2.1.116.1.2 |
tripRouteTypeEntryAn entry containing information about the route type that a particular TRIP entity supports. Each entry represents information about either the local or a remote LS peer. The object tripRouteTypePeer is used to distinguish this. In the case of a local LS, the address/port information will reflect the values configured in tripCfgTable. In the case of a remote peer, the address/port information will reflect the values of an entry in the tripPeerTable. Implementation need to be aware that if the size of tripRouteTypeAddr exceeds 111 sub-IDs, then OIDs of column instances in this table will have more than 128 sub-IDs and cannot be accessed using SNMPv1, SNMPv2c, or snmpv3. TripRouteTypeEntry .1.3.6.1.2.1.116.1.2.1 |
tripRouteTypeAddrInetTypeThe type of Inet Address of the tripRouteTypeAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.2.1.1 |
tripRouteTypeAddrThe network address of this entry's TRIP peer LS. The type of this address is determined by the value of the tripRouteTypeAddrInetType object. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.2.1.2 |
tripRouteTypePortThe port for the TCP connection between this and an associated TRIP peer. InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.2.1.3 |
tripRouteTypeProtocolIdThe object identifier of a protocol that the associated peer is using. TripAppProtocol (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.2.1.4 |
tripRouteTypeAddrFamilyIdThe object identifier of an address family that the associated peer belongs to. TripAddressFamily (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.2.1.5 |
tripRouteTypePeerThis object identifies whether this entry is associated with a 'local' or 'remote' LS peer.ro Enumeration .1.3.6.1.2.1.116.1.2.1.6 |
tripSupportedCommunityTableThe list of TRIP communities that this LS supports. A TRIP community is a group of destinations that share common properties. The TRIP Supported Communities entry is used to group destinations so that the routing decision can be based on the identity of the group. SEQUENCE OF TripSupportedCommunityEntry .1.3.6.1.2.1.116.1.3 |
tripSupportedCommunityEntryEntry containing information about a community. A TRIP community is a group of destinations that share some common property. This attribute is used so that routing decisions can be based on the identity of the group. TripSupportedCommunityEntry .1.3.6.1.2.1.116.1.3.1 |
tripSupportedCommunityIdThe identifier of the supported Community. TripCommunityId (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.3.1.1 |
tripSupportedCommunityItadThe ITAD of the community.rw TripItad (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.3.1.2 |
tripSupportedCommunityStorageThe storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write- access to any columnar objects in the row. It is not a requirement that this storage be non volatile.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.116.1.3.1.3 |
tripSupportedCommunityRowStatusThe row status of the entry. This object is REQUIRED to create or delete rows by a manager. A value for tripSupportedCommunityItad MUST be set for row creation to be successful. If the instance already exists for a particular applIndex, the row create operation will fail. The value of this object has no effect on whether other objects in this conceptual row can be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.116.1.3.1.4 |
tripPeerTableThe TRIP peer table. This table contains one entry per TRIP peer, and information about the connection with the peer. SEQUENCE OF TripPeerEntry .1.3.6.1.2.1.116.1.4 |
tripPeerEntryEntry containing information about the connection with a TRIP peer. Implementation need to be aware that if the size of tripPeerRemoteAddr exceeds 113 sub-IDs, then OIDs of column instances in this table will have more than 128 sub-IDs and cannot be accessed using SNMPv1, SNMPv2c, or snmpv3. TripPeerEntry .1.3.6.1.2.1.116.1.4.1 |
tripPeerRemoteAddrInetTypeThe type of Inet Address of the tripPeerRemoteAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.4.1.1 |
tripPeerRemoteAddrThe IP address of this entry's TRIP peer LS. The type of this address is determined by the value of the tripPeerRemoteAddrInetType object. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.4.1.2 |
tripPeerRemotePortThe remote port for the TCP connection between the TRIP peers. InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.4.1.3 |
tripPeerIdentifierTRIP identifier of the peer.ro TripId (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.4.1.4 |
tripPeerStateTRIP Peer Finite State Machine state. idle(1) : The initial state. Local LS refuses all incoming connections. No application resources are allocated to processing information about the remote peer. connect(2) : Local LS waiting for a transport protocol connection to be completed to the peer, and is listening for inbound transport connections from the peer. active(3) : Local LS is listening for an inbound connection from the peer, but is not in the process of initiating a connection to the remote peer. openSent(4) : Local LS has sent an OPEN message to its peer and is waiting for an OPEN message from the remote peer. openConfirm(5): Local LS has sent an OPEN message to the remote peer, received an OPEN message from the remote peer, and sent a KEEPALIVE message in response to the OPEN. The local LS is now waiting for a KEEPALIVE message or a NOTIFICATION message in response to its OPEN message. established(6): LS can exchange UPDATE, NOTIFICATION, and KEEPALIVE messages with its peer.ro Enumeration .1.3.6.1.2.1.116.1.4.1.5 |
tripPeerAdminStatusThis object is used to affect the TRIP connection state. up(1) : Allow a connection with the peer LS. down(2) : disconnect the connection from the peer LS and do not allow any further connections to this peer. If this value is set to down(2) then tripPeerState will have the value of idle(1).rw Enumeration .1.3.6.1.2.1.116.1.4.1.6 |
tripPeerNegotiatedVersionThe negotiated version of TRIP running between this local entity and this peer.ro TripProtocolVersion (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.4.1.7 |
tripPeerSendReceiveModeThe operational mode of this peer.ro TripSendReceiveMode (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.4.1.8 |
tripPeerRemoteItadThe Internet Telephony Administrative domain of this peer.ro TripItad (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.4.1.9 |
tripPeerConnectRetryIntervalSpecifies the initial amount of time that will elapse between connection retry. This value SHOULD double after each attempt up to the value of tripPeerMaxRetryInterval. This value MUST always be less than or equal to the value of tripPeerMaxRetryInterval. Attempts to set this value higher than the max retry will not be allowed.rw Unsigned32 .1.3.6.1.2.1.116.1.4.1.10 |
tripPeerMaxRetryIntervalSpecifies the maximum amount of time that will elapse between connection retries. Once the value of tripPeerConnectRetryInterval has reached this value, no more retries will be attempted. Attempts to set this value lower than the retry interval SHOULD not be allowed.rw Unsigned32 .1.3.6.1.2.1.116.1.4.1.11 |
tripPeerHoldTimeThe time interval in seconds for the hold timer that is established with the peer. The value of this object is the smaller of the values in tripPeerHoldTimeConfigured and the hold time received in the open message.ro Unsigned32 .1.3.6.1.2.1.116.1.4.1.12 |
tripPeerKeepAliveSpecifies the amount of time that MUST elapse between keep alive messages. This value is negotiated with the remote when a connection is established.ro Unsigned32 .1.3.6.1.2.1.116.1.4.1.13 |
tripPeerHoldTimeConfiguredSpecifies the maximum time that MAY elapse between the receipt of successive keepalive or update message. A value of 0 means that keepalive or update messages will not be sent.rw Unsigned32 (0 | 3..65535) UNITS "Seconds" .1.3.6.1.2.1.116.1.4.1.14 |
tripPeerKeepAliveConfiguredSpecifies the amount of time that MUST elapse between keep alive messages.rw Unsigned32 .1.3.6.1.2.1.116.1.4.1.15 |
tripPeerMaxPurgeTimeIndicates the interval that the LS MUST maintain routes marked as withdrawn in its database.rw Unsigned32 .1.3.6.1.2.1.116.1.4.1.16 |
tripPeerDisableTimeIndicate the interval that the TRIP module of the remote peer LS MUST be disabled while routes originated by the local LS with high sequence numbers can be removed.rw Unsigned32 .1.3.6.1.2.1.116.1.4.1.17 |
tripPeerLearnedIndicates whether this entry was learned or configured.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.116.1.4.1.18 |
tripPeerStorageThe storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write- access to any columnar objects in the row. It is not a requirement that this storage be non volatile.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.116.1.4.1.19 |
tripPeerRowStatusThe row status of the entry. This object is REQUIRED to create or delete rows remotely by a manager. If the instance already exists for a particular applIndex, the row create operation will fail. The value of this object has no effect on whether other objects in this conceptual row can be modified. Entries in this table can be learned by the TRIP application, or provisioned through this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.116.1.4.1.20 |
tripPeerStatisticsTableThe TRIP peer stats table. This table contains one entry per remote TRIP peer, and statistics related to the connection with the remote peer. The objects in this table are volatile. SEQUENCE OF TripPeerStatisticsEntry .1.3.6.1.2.1.116.1.5 |
tripPeerStatisticsEntryEntry containing information about the connection with a TRIP peer. TripPeerStatisticsEntry .1.3.6.1.2.1.116.1.5.1 |
tripPeerInUpdatesThe number of TRIP update messages received from this remote peer since the last restart of this location server.ro Counter32 .1.3.6.1.2.1.116.1.5.1.1 |
tripPeerOutUpdatesThe number of TRIP update messages sent to this remote peer since the last restart of this LS.ro Counter32 .1.3.6.1.2.1.116.1.5.1.2 |
tripPeerInTotalMessagesThe total number of TRIP messages received from the remote peer on this connection since the last restart of this LS.ro Counter32 .1.3.6.1.2.1.116.1.5.1.3 |
tripPeerOutTotalMessagesThe total number of outgoing TRIP messages sent to the remote peer since the last restart of this LS.ro Counter32 .1.3.6.1.2.1.116.1.5.1.4 |
tripPeerFsmEstablishedTransitionsThe number of times the remote peer has transitioned into the established state since the last restart of this LS.ro Counter32 .1.3.6.1.2.1.116.1.5.1.5 |
tripPeerFsmEstablishedTimeIndicates the time and date that this remote peer entered the 'established' state.ro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.116.1.5.1.6 |
tripPeerInUpdateElapsedTimeElapsed time in hundredths of seconds since the last TRIP update message was received from this remote peer.ro TimeInterval (SNMPv2-TC) .1.3.6.1.2.1.116.1.5.1.7 |
tripPeerStateChangeTimeThe value of sysUpTime when the last state change of tripPeerState took place.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.116.1.5.1.8 |
tripRouteTableThe TRIP route table containing information about reachable routes that are to be added to service by the receiving LS. The objects in this table are volatile and are refreshed when this LS rediscovers its route table. SEQUENCE OF TripRouteEntry .1.3.6.1.2.1.116.1.6 |
tripRouteEntryInformation about a route to a called destination. TripRouteEntry .1.3.6.1.2.1.116.1.6.1 |
tripRouteAppProtocolThe protocol for which this entry of the routing table is maintained. TripAppProtocol (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.6.1.1 |
tripRouteAddressFamilySpecifies the type of address for the destination route. TripAddressFamily (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.6.1.2 |
tripRouteAddressThis is the address (prefix) of the family type given by Address Family of the destination. It is the prefix of addresses reachable from this gateway via the next hop server. The SIZE value of 105 has been assigned due to the sub identifier of object types length limitation as defined in SMIv2. OCTET STRING .1.3.6.1.2.1.116.1.6.1.3 |
tripRoutePeerThe identifier of the peer where the route information was learned. TripId (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.6.1.4 |
tripRouteTRIBMaskIndicates which Telephony Routing Information Base (TRIB) this entry belongs to. This is a bit-map of possible types. If the bit has a value of 1, then the entry is a member of the corresponding TRIB type. If the bit has a value of 0 then the entry is not a member of the TRIP type. The various bit positions are: 0 adjTribIns The entry is of type adj-TRIBs-ins, stores routing information that has been learned from inbound UPDATE messages. 1 extTrib The entry is of type ext-TRIB, the best route for a given destination. 2 locTrib The entry is of type loc-TRIB contains the local TRIP routing information that the LS has selected. 3 adjTribOut The entry is of type adj-TRIBs-out, stores the information that the local LS has selected for advertisement to its external peers.ro Bits .1.3.6.1.2.1.116.1.6.1.5 |
tripRouteAddressSequenceNumberIndicates the version of the destination route originated by the LS identified by tripRouteAddressOriginatorId intra-domain attribute.ro Unsigned32 .1.3.6.1.2.1.116.1.6.1.6 |
tripRouteAddressOriginatorIdThis is an intra-domain attribute indicating the internal LS that originated the route into the ITAD.ro TripId (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.6.1.7 |
tripRouteNextHopServerIAddrTypeThe type of Inet Address of the tripRouteNextHopServer.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.6.1.8 |
tripRouteNextHopServerIndicates the next hop that messages of a given protocol destined for tripRouteAddress SHOULD be sent to. The type of this address is determined by the value of the tripRouteNextHopServerIAddrType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.6.1.9 |
tripRouteNextHopServerPortThe port of the next hop server that this route will use.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.1.6.1.10 |
tripRouteNextHopServerItadIndicates the domain of the next hop.ro TripItad (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.6.1.11 |
tripRouteMultiExitDiscThe Multiple Exit Discriminator allows an LS to discriminate between, and indicate preference for, otherwise similar routes to a neighbouring domain. A higher value represents a more preferred routing object.ro Unsigned32 .1.3.6.1.2.1.116.1.6.1.12 |
tripRouteLocalPrefIndicated the local LS's degree of preference for an advertised route destination.ro Unsigned32 .1.3.6.1.2.1.116.1.6.1.13 |
tripRouteAdvertisementPathIdentifies the sequence of domains through which this advertisement has passed. This object is probably best represented as sequence of TripItads. For SMI compatibility, though, it is represented as an OCTET STRING. This object is a sequence of ITADs where each set of 4 octets corresponds to a TRIP ITAD in network byte order.ro OCTET STRING .1.3.6.1.2.1.116.1.6.1.14 |
tripRouteRoutedPathIdentifies the ITADs through which messages sent using this route would pass. These are a subset of tripRouteAdvertisementPath. This object is probably best represented as sequence of TripItads. For SMI compatibility, though, it is represented as OCTET STRING. This object is a sequence of ITADs where each set of 4 octets corresponds to a TRIP ITAD in network byte order.ro OCTET STRING .1.3.6.1.2.1.116.1.6.1.15 |
tripRouteAtomicAggregateIndicates that a route MAY traverse domains not listed in tripRouteRoutedPath. If an LS selects the less specific route from a set of overlapping routes, then this value returns TRUE.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.116.1.6.1.16 |
tripRouteUnknownThis object contains one or more attributes that were not understood, and because they were transitive, were dropped during aggregation. They take the format of a triple <attribute type, attribute length, attribute value>, of variable length. If no attributes were dropped, this returns an OCTET STRING of size 0.ro OCTET STRING .1.3.6.1.2.1.116.1.6.1.17 |
tripRouteWithdrawnIndicates if this route is to be removed from service by the receiving LS.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.116.1.6.1.18 |
tripRouteConvertedIndicates if this route has been converted to a different application protocol than it had originally.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.116.1.6.1.19 |
tripRouteReceivedTimeThe value of sysUpTime when this route was received.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.116.1.6.1.20 |
tripRouteCommunityTableA table containing a list of TRIP communities associated with a route. Each instance of tripRouteTypeEntry that has the tripRouteTypePeer object set to remote(2) has an instance in the tripRouteTable as a parent. The objects in this table are volatile and are refreshed after a reboot. SEQUENCE OF TripRouteCommunityEntry .1.3.6.1.2.1.116.1.7 |
tripRouteCommunityEntryInformation about communities associated with a route. An entry with a tripRouteAddress of 00 and a tripRoutePeer of 0 refers to the local LS. TripRouteCommunityEntry .1.3.6.1.2.1.116.1.7.1 |
tripRouteCommunityIdThe community identifier. TripCommunityId (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.7.1.1 |
tripRouteCommunityItadThe ITAD associated with this community.ro TripItad (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.7.1.2 |
tripItadTopologyTableThe sequence of link connections between peers within an ITAD. The objects in this table are volatile and are refreshed after a reboot. SEQUENCE OF TripItadTopologyEntry .1.3.6.1.2.1.116.1.8 |
tripItadTopologyEntryInformation about a peer of the LS identified by tripItadTopologyOrigId. TripItadTopologyEntry .1.3.6.1.2.1.116.1.8.1 |
tripItadTopologyOrigIdIndicates the internal LS that originated the ITAD topology information into the ITAD. TripId (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.8.1.1 |
tripItadTopologySeqNumIndicates the version of the ITAD topology originated by the LS identified by tripItadTopologyOrigId.ro Unsigned32 .1.3.6.1.2.1.116.1.8.1.2 |
tripItadTopologyIdTableThe list of other LS's within the ITAD domain that the LS identified by tripItadTopologyOrigId is currently peering. Each instance of tripItadTopologyIdEntry has an instance in the tripItadTopologyTable as a parent. The objects in this table are volatile and are refreshed after a reboot. SEQUENCE OF TripItadTopologyIdEntry .1.3.6.1.2.1.116.1.9 |
tripItadTopologyIdEntryInformation about a peer to the LS identified by tripItadTopologyOrigId. TripItadTopologyIdEntry .1.3.6.1.2.1.116.1.9.1 |
tripItadTopologyIdThe index into this entry. Indicates the other location servers within the ITAD domain that this LS identified by tripItadTopologyOrigId is currently peering.ro TripId (TRIP-TC-MIB) .1.3.6.1.2.1.116.1.9.1.1 |
tripMIBConformance OBJECT IDENTIFIER .1.3.6.1.2.1.116.2 |
tripMIBCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.116.2.1 |
tripMIBFullComplianceThe compliance statement for TRIP entities that implement this MIB module in read-write mode, such that it can be used for both monitoring and configuring the TRIP entity. There is one INDEX object that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there is a compliance requirement, expressed in OBJECT clause form in this description: -- OBJECT tripRouteTypeAddrInetType -- SYNTAX InetAddressType (ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)) -- DESCRIPTION -- This MIB requires support for global and -- non-global ipv4 and ipv6 addresses. -- -- OBJECT tripRouteTypeAddr -- SYNTAX InetAddress (SIZE (4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for global and -- non-global IPv4 and IPv6 addresses. -- Unknown .1.3.6.1.2.1.116.2.1.1 |
tripMIBReadOnlyComplianceThe compliance statement for TRIP entities that implement this MIB module in read only mode. Such TRIP entities can then only be monitored, but not be configured via this MIB module. In read-only mode, the manager will not be able to add, remove or modify rows to any table, however the TRIP application may modify, remove or add rows to a table. There is one INDEX object that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there is a compliance requirement, expressed in OBJECT clause form in this description: -- OBJECT tripRouteTypeAddrInetType -- SYNTAX InetAddressType (ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)) -- DESCRIPTION -- This MIB requires support for global and -- non-global ipv4 and ipv6 addresses. -- -- OBJECT tripRouteTypeAddr -- SYNTAX InetAddress (SIZE (4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for global and -- non-global IPv4 and IPv6 addresses. -- Unknown .1.3.6.1.2.1.116.2.1.2 |
tripMIBGroups OBJECT IDENTIFIER .1.3.6.1.2.1.116.2.2 |
tripConfigGroupThe global objects for configuring trip. Unknown .1.3.6.1.2.1.116.2.2.1 |
tripPeerTableConfigGroupThe global objects for configuring the TRIP peer table. Unknown .1.3.6.1.2.1.116.2.2.2 |
tripPeerTableStatsGroupThe global statistics the TRIP peer table. Unknown .1.3.6.1.2.1.116.2.2.3 |
tripRouteGroupThe global objects for configuring route attribute. Unknown .1.3.6.1.2.1.116.2.2.4 |
tripItadTopologyGroupThe objects that define the TRIP ITAD topology. Unknown .1.3.6.1.2.1.116.2.2.5 |
tripNotificationGroupA collection of notifications defined for TRIP. Unknown .1.3.6.1.2.1.116.2.2.6 |
tripNotifObjectGroupThe collection of objects that specify information for TRIP notifications. Unknown .1.3.6.1.2.1.116.2.2.7 |
tripMIBNotifObjects OBJECT IDENTIFIER .1.3.6.1.2.1.116.3 |
tripNotifApplIndexThis object contains the application Index. It is used to bind this notification with a specific instance of TRIP entity.ro Integer32 .1.3.6.1.2.1.116.3.1 |
tripNotifPeerAddrInetTypeThe type of Inet Address of the tripNotifPeerAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.3.2 |
tripNotifPeerAddrThe IP address of this entry's TRIP peer LS. This object contains the value of tripPeerRemoteAddr. The type of this address is determined by the value of the tripNotifPeerAddrInetType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.116.3.3 |
tripNotifPeerErrCodeNotification message of TRIP error. The meaning of this value is applicable to the following functions: messageHeader(1) - All errors detected while processing the TRIP message header. openMessage(2) - All errors detected while processing the OPEN message. updateMessage(3) - All errors detected while processing the UPDATE message. holdTimerExpired(4) - A notification generated when the hold timer expires. finiteStateMachine(5) - All errors detected by the TRIP Finite State Machine. cease(6) - Any fatal error condition that the rest of the values do not cover. tripNotification(7) - Any error encountered while sending a notification message.ro Enumeration .1.3.6.1.2.1.116.3.4 |
tripNotifPeerErrSubcodeThe sub error code associated with error code. The meaning of this value is dependent on the value of tripNotifPeerErrCode. Message Header (1) Error Subcodes: 1 - Bad Message Length. 2 - Bad Message Type. OPEN Message (2) Error Subcodes: 1 - Unsupported Version Number. 2 - Bad Peer ITAD. 3 - Bad TRIP Identifier. 4 - Unsupported Optional Parameter. 5 - Unacceptable Hold Time. 6 - Unsupported Capability. 7 - Capability Mismatch. UPDATE Message (3) Error Subcodes: 1 - Malformed Attribute List. 2 - Unrecognized Well-known Attribute. 3 - Missing Well-known Mandatory Attribute. 4 - Attribute Flags Error. 5 - Attribute Length Error. 6 - Invalid Attribute.ro Unsigned32 .1.3.6.1.2.1.116.3.5 |