TRAPEZE-NETWORKS-QOS-CONFIG-MIB
The TRAPEZE-NETWORKS-QOS-CONFIG-MIB enables SNMP-based configuration and monitoring of Quality of Service parameters, including traffic classification, queuing policies, and scheduling rules, on Trapeze Networks Access Controller wireless switches. This module facilitates the enforcement of bandwidth management and latency control policies to ensure consistent performance for prioritized traffic flows across the wireless infrastructure.
Imported Objects
Objects
11 total| Object Name |
|---|
trpzQosConfigMibQoS Configuration objects MIB for Trapeze Networks wireless switches. AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright (c) 2010-2011 by Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.14525.4.20 |
trpzQosConfigMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.14525.4.20.1 |
trpzQosConfQosProfileConfigTableA table describing the QoS Profiles configured on this AC. SEQUENCE OF TrpzQosConfQosProfileConfigEntry .1.3.6.1.4.1.14525.4.20.1.1 |
trpzQosConfQosProfileConfigEntryInformation about a particular QoS Profile on the AC. TrpzQosConfQosProfileConfigEntry .1.3.6.1.4.1.14525.4.20.1.1.1 |
trpzQosConfQosProfConfProfileNameThe Name of this QoS Profile. OCTET STRING .1.3.6.1.4.1.14525.4.20.1.1.1.1 |
trpzQosConfQosProfConfMaxBandwidthKbpsThe bandwidth limit for an entity using this QoS profile, in Kbits/second. A value of zero means unlimited.rw Unsigned32 .1.3.6.1.4.1.14525.4.20.1.1.1.2 |
trpzQosConfigConformance OBJECT IDENTIFIER .1.3.6.1.4.1.14525.4.20.2 |
trpzQosConfigCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.14525.4.20.2.1 |
trpzQosConfigComplianceThe compliance statement for devices that implement QoS Configuration MIB. This compliance statement is for releases 7.5 and greater of AC (wireless switch) software. Unknown .1.3.6.1.4.1.14525.4.20.2.1.1 |
trpzQosConfigGroups OBJECT IDENTIFIER .1.3.6.1.4.1.14525.4.20.2.2 |
trpzQosConfQosProfileConfigGroupGroup of columnar objects implemented to provide QoS Profile Configuration info in releases 7.5 and greater. Unknown .1.3.6.1.4.1.14525.4.20.2.2.1 |
More MIBs from Trapeze
Browse all TrapezeMIBs →The TRAPEZE-NETWORKS-AP-CONFIG-MIB enables SNMP-based configuration management of Trapeze Networks wireless Access Controllers (ACs) to retrieve and modify Access Point (AP) operational parameters, including radio settings, security policies, and interface configurations. This module facilitates centralized provisioning and state monitoring of the AP infrastructure by exposing specific configuration objects required for network device administration.
The TRAPEZE-NETWORKS-TRAP-MIB defines the SNMP notification set for Trapeze Networks wireless access controllers (ACs) and access points (APs), enabling the monitoring of critical infrastructure events such as device state transitions, link failures, authentication anomalies, and hardware faults. These traps facilitate real-time alerting for network operations centers to detect and respond to wireless network instability, controller availability issues, and AP connectivity disruptions without polling overhead.
The TRAPEZE-NETWORKS-AP-STATUS-MIB enables SNMP monitoring of operational states and performance metrics for Access Points connected to Trapeze Networks wireless switches. This module facilitates the tracking of AP connectivity status, association counts, and radio interface health to ensure the integrity of the managed wireless infrastructure.
The TRAPEZE-NETWORKS-CLIENT-SESSION-MIB enables SNMP monitoring of active wireless client associations, session states, and throughput statistics on Trapeze Networks Access Controllers (wireless switches). This module provides granular visibility into per-Access Point client session metrics, including connection counts, authentication status, and data transfer volumes for network capacity planning and troubleshooting.
The TRAPEZE-NETWORKS-TRAPLOG-MIB provides read-only access to a circular buffer of recent SNMP trap events generated by Trapeze Networks Access Controllers, enabling the retrospective analysis of detected network anomalies. This module facilitates the monitoring of historical device alerts without supporting configuration of logging filters or resource limits, and it offers no persistence guarantees across SNMP agent restarts.
The TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB enables SNMP monitoring of radio frequency interference detection and rogue access point identification metrics on Trapeze Networks wireless LAN controllers. It provides specific counters and status indicators for detecting unauthorized RF signals and classifying detected threats within the managed wireless infrastructure.