TRAPEZE-NETWORKS-TRAP-MIB
AI MIB Summary
The TRAPEZE-NETWORKS-TRAP-MIB defines the SNMP notification set for Trapeze Networks wireless access controllers (ACs) and access points (APs), enabling the monitoring of critical infrastructure events such as device state transitions, link failures, authentication anomalies, and hardware faults. These traps facilitate real-time alerting for network operations centers to detect and respond to wireless network instability, controller availability issues, and AP connectivity disruptions without polling overhead.
Notifications emitted by Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2004-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
trpzTrapMib.1.3.6.1.4.1.14525.4.1
245
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
245 total| Object Name |
|---|
trpzDeviceIdEnumeration of devices as indicated in registration MIB. This object is used within notifications and is not accessible.ro OBJECT IDENTIFIER .1.3.6.1.4.1.14525.2.1 |
trpzMobilityDomainIpIP address of the other switch which the send switch is reporting on. This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.2 |
trpzAPMACAddressMAC address of the AP of interest. This object is used within notifications and is not accessible.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14525.2.3 |
trpzClientMACAddressMAC address of the client of interest. This object is used within notifications and is not accessible.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14525.2.4 |
trpzRFDetectXmtrMacAddrDescribes the transmitter's MAC address. This object is used within notifications and is not accessible.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14525.2.5 |
trpzPortNumPort number on the AC which reported this rogue during a detection sweep. This object is used within notifications and is not accessible.ro INTEGER .1.3.6.1.4.1.14525.2.6 |
trpzAPRadioNumRadio number of the AP which reported this rogue during a detection sweep. This object is used within notifications and is not accessible.ro TrpzRadioNum (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.7 |
trpzRadioRssiThe received signal strength as measured by the AP radio which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. Not used by any notification.roobsolete INTEGER .1.3.6.1.4.1.14525.2.8 |
trpzRadioBSSIDThe basic service set identifier of the rogue from the beacon frame reported by the AP during a detection sweep. This object is used within notifications and is not accessible.ro OCTET STRING .1.3.6.1.4.1.14525.2.9 |
trpzUserNameThe client user name as learned from the AAA process. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.10 |
trpzClientAuthServerIpThe client authentication server ip address. This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.11 |
trpzClientSessionStateThe state for a client session. This object is used within notifications and is not accessible.ro TrpzClientSessionState (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.12 |
trpzDAPNumThe DAP number on the wireless switch. This object is used within notifications and is not accessible.ro INTEGER .1.3.6.1.4.1.14525.2.13 |
trpzClientIpThe client ip address. This object is used within notifications and is not accessible.roobsolete IpAddress .1.3.6.1.4.1.14525.2.14 |
trpzClientSessionIdThe unique global id for a client session. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.15 |
trpzClientAuthenProtocolTypeThe authentication protocol for a client. This object is used within notifications and is not accessible.ro TrpzClientAuthenProtocolType (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.16 |
trpzClientVLANNameThe vlan name a client is on. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.17 |
trpzClientSessionStartTimeThe start time of a client session, relative to the sysUptime. This object is used within notifications and is not accessible. Obsolete. Do not use it because it's not vital information and often *cannot* be implemented to match the declared semantics: a client session might have been created on another wireless switch, *before* the current switch booted (the local zero of sysUptime).roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14525.2.18 |
trpzClientFailureCauseDisplay string for possible failure cause for a client session. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.19 |
trpzClientRoamedFromPortNumThe port number on the AC a client has roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromPhysPortNum'.roobsolete INTEGER .1.3.6.1.4.1.14525.2.20 |
trpzClientRoamedFromRadioNumThe radio number of the AP the client is roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromRadioIndex'.roobsolete TrpzRadioNum (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.21 |
trpzClientRoamedFromDAPNumThe DAP number on the AC which reported this rogue during roam. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromApNum'.roobsolete INTEGER .1.3.6.1.4.1.14525.2.22 |
trpzUserParamsA display string of User Parameters for client user authorization attributes learned through AAA and/or used by the system. Note that the syntax will be (name=value, name=value,..) for the parsing purpose. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.23 |
trpzClientLocationPolicyIndexIndex of the Location Policy rule applied to a user. This object is used within notifications and is not accessible.ro INTEGER .1.3.6.1.4.1.14525.2.24 |
trpzClientAssociationFailureCauseThe client association failure cause. This object is used within notifications and is not accessible.ro TrpzAssociationFailureType .1.3.6.1.4.1.14525.2.25 |
trpzClientAuthenticationFailureCauseThe client authentication failure cause. This object is used within notifications and is not accessible.ro TrpzAuthenticationFailureType .1.3.6.1.4.1.14525.2.26 |
trpzClientAuthorizationFailureCauseThe client authorization failure cause. Note that if it is the user-param, we would additionally expect the failure cause description to list the user attribute value that caused the failure. This object is used within notifications and is not accessible.ro TrpzAuthorizationFailureType .1.3.6.1.4.1.14525.2.27 |
trpzClientFailureCauseDescriptionDisplay string for describing the client failure cause. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.28 |
trpzClientRoamedFromWsIpThe system IP address of the AC (wireless switch) a client roamed from. This object is used within notifications and is not accessible.roobsolete IpAddress .1.3.6.1.4.1.14525.2.29 |
trpzClientRoamedFromAccessTypeThe client access type (ap, dap, wired) that a client roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromAccessMode'.roobsolete TrpzAccessType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.30 |
trpzClientAccessTypeThe client access type (ap, dap, wired). This object is used within notifications and is not accessible. For new traps, use trpzClientAccessMode instead of this object.ro TrpzAccessType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.31 |
trpzRadioMACAddressAP Radio MAC address. This object is used within notifications and is not accessible.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14525.2.32 |
trpzRadioPowerChangeReasonThe type of event that caused an AP radio power change; occurs due to auto-tune operation. This object is used within notifications and is not accessible.ro TrpzRadioPowerChangeType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.33 |
trpzNewChannelNumNew channel number of the AP radio used after an auto tune event. This object is used within notifications and is not accessible.ro INTEGER .1.3.6.1.4.1.14525.2.34 |
trpzOldChannelNumOld channel number of the AP radio used before an auto tune event. This object is used within notifications and is not accessible.ro INTEGER .1.3.6.1.4.1.14525.2.35 |
trpzChannelChangeReasonThe type of event that caused an AP radio channel change; occurs due to auto-tune operation. This object is used within notifications and is not accessible.ro TrpzChannelChangeType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.36 |
trpzRFDetectListenerListInfoThe RF Detection Listener list info including a list of (listener mac, rssi, channel, ssid, time). There will be a maximum of 6 entries in the list. Formats: MAC: 18 bytes: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X RSSI: 10 bytes: %10d CHANNEL: 3 bytes: %3d SSID: 32 bytes: %s TIME: 26 bytes: %s Maximum size per entry is 89+4+2 = 95 bytes. Maximum size of the string is 6*95= 571 bytes (include NULL). This object is used within notifications and is not accessible.ro OCTET STRING .1.3.6.1.4.1.14525.2.37 |
trpzRadioSSIDThe radio SSID string This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.38 |
trpzNewPowerLevelNew power level of the AP radio used after an auto tune event. This object is used within notifications and is not accessible.ro TrpzPowerLevel (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.39 |
trpzOldPowerLevelOld power level of the AP radio used before an auto tune event. This object is used within notifications and is not accessible.ro TrpzPowerLevel (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.40 |
trpzRadioPowerChangeDescriptionThe radio power change description. In the case of reason being dup-pkts-threshold-exceed(1), and retransmit-threshold-exceed(2), clientMacAddress will be included in the description. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.41 |
trpzCounterMeasurePerformerListInfoA list of information for APs performing Counter Measures including a list of performer mac addresses. This object is used within notifications and is not accessible. Not used by any notification.roobsolete DisplayString .1.3.6.1.4.1.14525.2.42 |
trpzClientDot1xStateThe state for a client 802.1X. This object is used within notifications and is not accessible.ro TrpzClientDot1xState (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.43 |
trpzClientDot1xFailureCauseThe client 802.1X failure cause. This object is used within notifications and is not accessible.ro TrpzDot1xFailureType .1.3.6.1.4.1.14525.2.44 |
trpzAPAccessTypeThe access point access type (ap, dap,). This object is used within notifications and is not accessible. Not used by any notification.roobsolete TrpzAccessType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.45 |
trpzUserAccessTypeThe user access type (MAC, WEB, DOT1X, LAST-RESORT). This object is used within notifications and is not accessible.ro TrpzUserAccessType (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.46 |
trpzClientSessionElapsedTimeThe elapsed time for a client session. Obsoleted because session time is usually reported in seconds. This object is used within notifications and is not accessible.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14525.2.47 |
trpzLocalIdLocal Id for the session. This object is used within notifications and is not accessible.ro INTEGER .1.3.6.1.4.1.14525.2.48 |
trpzRFDetectDoSTypeThe type of denial of service (DoS) attack. This object is used within notifications and is not accessible.ro TrpzRFDetectDoSType .1.3.6.1.4.1.14525.2.49 |
trpzSourceWsIpIP address of another AC (wireless switch). This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.50 |
trpzClientVLANidVLAN ID used by client traffic. This object is used within notifications and is not accessible.ro INTEGER .1.3.6.1.4.1.14525.2.51 |
trpzClientVLANtagVLAN tag used by client traffic. This object is used within notifications and is not accessible.ro INTEGER .1.3.6.1.4.1.14525.2.52 |
trpzDeviceModelThe model of a device in printable US-ASCII. If unknown (or not available), then the value is a zero length string. This object is used within notifications and is not accessible.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14525.2.53 |
trpzDeviceSerNumThe serial number of an AP in printable US-ASCII. If unknown (or not available), then the value is a zero length string. Should NOT be used to identify other devices, for example an AC (wireless switch). This object is used within notifications and is not accessible.ro TrpzApSerialNum (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.54 |
trpzRsaPubKeyFingerPrintThe hash of the RSA public key (of a key pair) in binary form that uniquely identifies the public key of an AP. This object is used within notifications and is not accessible.ro TrpzApFingerprint (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.55 |
trpzDAPconnectWarningTypeThe type of DAP connect warning. The values are: not-configured-fingerprint-connect(1)...a DAP, which has an RSA keypair but did not have its fingerprint configured on the AC, has connected to the AC when 'dap security' set to 'OPTIONAL' secure-handshake-failure(2).............a DAP tried to connect to the AC with security, but the handshake failed not-configured-fingerprint-required(3)..a DAP tried to connect to the AC with security, but 'dap security' set to 'REQUIRED', and no fingerprint was configured for the DAP fingerprint-mismatch(4).................a DAP tried to connect to the AC with security and its fingerprint was configured, but the fingerprint did not match the computed one This object is used within notifications and is not accessible.ro Enumeration .1.3.6.1.4.1.14525.2.56 |
trpzClientMACAddress2MAC address of the second client of interest. This object is used within notifications and is not accessible.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14525.2.57 |
trpzApAttachTypeHow the AP is attached to the AC (directly or via L2/L3 network). This object is used within notifications and is not accessible.ro TrpzApAttachType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.58 |
trpzApPortOrDapNumThe Port Number if the AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. This object is used within notifications and is not accessible. Obsoleted by trpzApNum. (In 6.0, direct- and network-attached APs were unified.)roobsolete TrpzApPortOrDapNum (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.59 |
trpzApNameThe name of the AP, as assigned in AC's CLI; defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). This object is used within notifications and is not accessible.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.14525.2.60 |
trpzApTransitionAP state Transition, as seen by the AC. This object is used within notifications and is not accessible.ro TrpzApTransition (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.61 |
trpzApFailDetailDetailed failure code for some of the transitions specified in 'trpzApTransition' object. This object is used within notifications and is not accessible.ro TrpzApFailDetail (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.62 |
trpzRadioTypeIndicates the AP Radio Type, as seen by AC. This object is used within notifications and is not accessible.ro TrpzRadioType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.63 |
trpzRadioConfigStateIndicates the Radio State, as seen by the AC. This object is used within notifications and is not accessible.ro TrpzRadioConfigState (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.64 |
trpzApConnectSecurityTypeIndicates the security level of the connection between AP and AC. This object is used within notifications and is not accessible.ro TrpzApConnectSecurityType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.65 |
trpzApServiceAvailabilityIndicates the level of wireless service availability. This object is used within notifications and is not accessible.ro TrpzApServiceAvailability (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.66 |
trpzApWasOperationalIndicates whether the AP was operational before a transition occurred. This object is used within notifications and is not accessible.ro TrpzApWasOperational (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.67 |
trpzClientTimeSinceLastRoamThe time in seconds since the most recent roam of a given client. This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.68 |
trpzClientIpAddrChangeReasonIndicates the reason why client IP address changed. This object is used within notifications and is not accessible.ro TrpzClientIpAddrChangeReason .1.3.6.1.4.1.14525.2.69 |
trpzRFDetectRogueAPMacAddrDescribes the MAC address of the Rogue AP the transmitter is connected to. This object is used within notifications and is not accessible.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14525.2.70 |
trpzBlacklistingRemainingTimeThe time in seconds remaining until a given transmitter could be removed from the Black List. This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.71 |
trpzBlacklistingCauseIndicates the reason why a given transmitter is blacklisted. This object is used within notifications and is not accessible.ro TrpzBlacklistingCause .1.3.6.1.4.1.14525.2.72 |
trpzNumLicensedActiveAPsIndicates the maximum (licensed) number of active APs for this AC. This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.73 |
trpzClientDynAuthorClientIpThe dynamic authorization client IP address which caused the change of authorization. This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.74 |
trpzChangedUserParamOldValuesA display string listing the changed AAA attributes and their values, before the change of authorization was executed. This object is used within notifications and is not accessible.ro TrpzUserAttributeList .1.3.6.1.4.1.14525.2.75 |
trpzChangedUserParamNewValuesA display string listing the changed AAA attributes and their values, after the change of authorization was executed. This object is used within notifications and is not accessible.ro TrpzUserAttributeList .1.3.6.1.4.1.14525.2.76 |
trpzClientDisconnectSourceThe external source that initiated the termination of a session. This object is used within notifications and is not accessible.ro TrpzSessionDisconnectType .1.3.6.1.4.1.14525.2.77 |
trpzClientDisconnectDescriptionDisplay string for providing available information related to the external source that initiated a session termination. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.78 |
trpzMobilityDomainSecondarySeedIpThe secondary seed IP address to which the Mobility Domain has failed over. This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.79 |
trpzMobilityDomainPrimarySeedIpThe primary seed IP address to which the Mobility Domain has failed back. This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.80 |
trpzRFDetectClassificationReasonIndicates the reason why a RF device is classified the way it is. This object is used within notifications and is not accessible.ro TrpzRFDetectClassificationReason (TRAPEZE-NETWORKS-RF-DETECT-TC) .1.3.6.1.4.1.14525.2.81 |
trpzConfigSaveFileNameDisplay string listing the name of the file to which the running configuration was saved. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.82 |
trpzConfigSaveInitiatorTypeIndicates the source that initiated a configuration save. This object is used within notifications and is not accessible.ro TrpzConfigSaveInitiatorType .1.3.6.1.4.1.14525.2.83 |
trpzConfigSaveInitiatorIpThe IP address of the source that initiated a configuration save. This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.84 |
trpzConfigSaveInitiatorDetailsDisplay string listing additional information regarding the source that initiated a configuration save, when available. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.85 |
trpzConfigSaveGenerationIndicates the number of configuration changes since the last system boot. The generation count is used to track the number of times the running configuration has been changed due to administrative actions (set/clear), SNMP requests (SET), XML requests (e.g. RingMaster). This object is used within notifications and is not accessible.ro Counter32 .1.3.6.1.4.1.14525.2.86 |
trpzApNumThe administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. This object is used within notifications and is not accessible. Obsoletes trpzApPortOrDapNum. For clarity, use this object to identify an AP since in 6.0 directly attached APs and DAPs were unified.ro TrpzApNum (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.87 |
trpzRadioModeIndicates the administratively controlled Radio Mode (enabled/disabled/sentry). This object is used within notifications and is not accessible.ro TrpzRadioMode (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.88 |
trpzMichaelMICFailureCauseIndicates the Michael MIC Failure cause / who detected it. This object is used within notifications and is not accessible.ro TrpzMichaelMICFailureCause .1.3.6.1.4.1.14525.2.89 |
trpzClientAccessModeThe client access mode (ap, wired). This object is used within notifications and is not accessible. Intended to replace trpzClientAccessType. (In 6.0, direct- and network-attached APs were unified.)ro TrpzClientAccessMode (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.90 |
trpzClientAuthorizationReasonIndicates the reason why client performed AAA authorization. This object is used within notifications and is not accessible.ro TrpzClientAuthorizationReason .1.3.6.1.4.1.14525.2.91 |
trpzPhysPortNumPhysical Port Number on the AC. Zero means the port is unknown or not applicable (for example, when trpzClientAccessMode = 'ap'). This object is used within notifications and is not accessible.ro TrpzPhysPortNumberOrZero (TRAPEZE-NETWORKS-BASIC-TC) .1.3.6.1.4.1.14525.2.92 |
trpzApMgrOldIpThe IP address of the AP's former primary manager switch. This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.93 |
trpzApMgrNewIpThe IP address of the AP's new primary manager switch. This address was formerly the AP's secondary backup link. This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.94 |
trpzApMgrChangeReasonIndicates the reason why the AP's primary manager changed. This object is used within notifications and is not accessible.ro TrpzApMgrChangeReason .1.3.6.1.4.1.14525.2.95 |
trpzClientClearedReasonIndicates the reason why client was cleared. This object is used within notifications and is not accessible.ro TrpzClientClearedReason .1.3.6.1.4.1.14525.2.96 |
trpzMobilityDomainResiliencyStatusIndicates the current resilient capacity status for a mobility domain. This object is used within notifications and is not accessible.ro TrpzMobilityDomainResiliencyStatus .1.3.6.1.4.1.14525.2.97 |
trpzClientSessionElapsedSecondsIndicates the time in seconds elapsed since the start of the Client Session. This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.98 |
trpzRadioChannelWidthIndicates the administratively controlled Channel Width (20MHz/40MHz). This object is used within notifications and is not accessible.ro TrpzRadioChannelWidth (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.99 |
trpzRadioMimoStateIndicates the Radio MIMO State, as seen by the AC (1x1/2x3/3x3). This object is used within notifications and is not accessible.ro TrpzRadioMimoState (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.100 |
trpzClientRadioTypeIndicates the Client Radio Type, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible.ro TrpzRadioType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.101 |
trpzRFDetectXmtrRadioTypeIndicates the Radio Type of the Transmitter, as detected by an attached AP and reported to the AC. The Transmitter may be a wireless client or an AP. This object is used within notifications and is not accessible.ro TrpzRadioType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.102 |
trpzRFDetectXmtrCryptoTypeIndicates the Crypto Type used by the Transmitter, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible.ro TrpzCryptoType (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.103 |
trpzClusterFailureReasonIndicates the reason why cluster configuration failed to apply. This object is used within notifications and is not accessible.ro TrpzClusterFailureReason .1.3.6.1.4.1.14525.2.104 |
trpzClusterFailureDescriptionDisplay string for describing the cluster configuration failure cause. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.105 |
trpzMultimediaCommunicationServerIDThe multimedia communication server ID. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.106 |
trpzMultimediaLocalStationIpThe local multimedia station IP address. This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.107 |
trpzMultimediaLocalStationPortThe local multimedia station UDP port. This object is used within notifications and is not accessible.ro TrpzIpPort (TRAPEZE-NETWORKS-BASIC-TC) .1.3.6.1.4.1.14525.2.108 |
trpzMultimediaLocalStationEndpointIDThe local multimedia station endpoint ID. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.109 |
trpzMultimediaRemoteStationIpThe remote multimedia station IP address. This object is used within notifications and is not accessible.ro IpAddress .1.3.6.1.4.1.14525.2.110 |
trpzMultimediaRemoteStationPortThe remote multimedia station UDP port. This object is used within notifications and is not accessible.ro TrpzIpPort (TRAPEZE-NETWORKS-BASIC-TC) .1.3.6.1.4.1.14525.2.111 |
trpzMultimediaRemoteStationEndpointIDThe remote multimedia station endpoint ID. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.112 |
trpzMultimediaSignalingProtocolThe multimedia signaling protocol that was used for initiating this call (session). This object is used within notifications and is not accessible.ro TrpzMultimediaSignalingProtocol .1.3.6.1.4.1.14525.2.113 |
trpzMultimediaCallBandwidthAndCodecDisplay string providing information about the multimedia call codec and bandwidth. This object is used within notifications and is not accessible.ro DisplayString .1.3.6.1.4.1.14525.2.114 |
trpzMultimediaCallDataRateThe data rate, in Kbps. This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.115 |
trpzMultimediaCallRssiThe client RSSI (Received Signal Strength Indicator), in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal. This object is used within notifications and is not accessible.ro TrpzRssi (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.116 |
trpzMultimediaCallFailureReasonIndicates the reason why the multimedia call has failed. This object is used within notifications and is not accessible.ro TrpzMultimediaCallFailureReason .1.3.6.1.4.1.14525.2.117 |
trpzMultimediaCallDirectionIndicates the multimedia call direction (incoming/outgoing). This object is used within notifications and is not accessible.ro TrpzMultimediaCallDirection .1.3.6.1.4.1.14525.2.118 |
trpzApTunnelLimitIndicates the maximum number of tunnels supported for an AP. This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.119 |
trpzWsTunnelLimitIndicates the maximum number of tunnels supported for an AC (wireless switch). This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.120 |
trpzWsTunnelLimitTypeIndicates the type of limit exceeded that caused the AC (wireless switch) to reject a tunnel creation request. This object is used within notifications and is not accessible.ro TrpzWsTunnelLimitType .1.3.6.1.4.1.14525.2.121 |
trpzRFNoiseSourceIDRF Noise Source ID. This object is used within notifications and is not accessible.ro TrpzRFNoiseSourceID (TRAPEZE-NETWORKS-RF-NOISE-TC-MIB) .1.3.6.1.4.1.14525.2.122 |
trpzRFNoiseSourceTypeRF Noise Source Type. This object is used within notifications and is not accessible.ro TrpzRFNoiseSourceType (TRAPEZE-NETWORKS-RF-NOISE-TC-MIB) .1.3.6.1.4.1.14525.2.123 |
trpzRFNoiseChannelChannel number. This object is used within notifications and is not accessible.ro TrpzChannelNum (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.124 |
trpzRFNoiseRssiThe noise RSSI (Received Signal Strength Indicator), in decibels referred to 1 milliwatt (dBm). A higher value indicates stronger noise. This object is used within notifications and is not accessible.ro TrpzRssi (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.125 |
trpzRFNoiseDutyCycleEstimated Duty Cycle: fraction of time that a noise source is transmitting. This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.126 |
trpzRFNoiseChannelInterferenceMeasureSeverity of channel interference attributed to a noise source. A higher value indicates more severe interference. This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.127 |
trpzRFNoiseAgeAge of noise in seconds. This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.128 |
trpzM2UMulticastAddrTypeThe address type of 'trpzM2UMulticastAddr'. This object is used within notifications and is not accessible.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.129 |
trpzM2UMulticastAddrThe multicast address for which conversion to unicast is performed. The type of this address is specified in 'trpzM2UMulticastAddrType'. This object is used within notifications and is not accessible.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.130 |
trpzM2UConvNotPossibleReasonIndicates the reason why multicast to unicast conversion cannot be performed on an AP with this feature enabled. This object is used within notifications and is not accessible.ro TrpzM2UConvNotPossibleReason .1.3.6.1.4.1.14525.2.131 |
trpzRadioBandIndicates the radio band used in an auto-tune operation. This object is used within notifications and is not accessible.ro TrpzRadioBand .1.3.6.1.4.1.14525.2.132 |
trpzRadiosTunedCountIndicates how many radios had their operational characteristics changed as a result of an auto-tune process. This object is used within notifications and is not accessible.ro Unsigned32 .1.3.6.1.4.1.14525.2.133 |
trpzAutoTuneFailureReasonIndicates the reason why an auto-tune operation failed to complete. This object is used within notifications and is not accessible.ro TrpzAutoTuneFailureReason .1.3.6.1.4.1.14525.2.134 |
trpzClientAuthServerAddrTypeThe address type of 'trpzClientAuthServerAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.135 |
trpzClientAuthServerAddrThe Internet address of the client authentication server. The type of this address is specified in 'trpzClientAuthServerAddrType'. This object is used within notifications and is not accessible.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.136 |
trpzClientRoamedFromWsAddrTypeThe address type of 'trpzClientRoamedFromWsAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.137 |
trpzClientRoamedFromWsAddrThe system IP address of the AC (wireless switch) a client roamed from. The type of this address is specified in 'trpzClientRoamedFromWsAddrType'. This object is used within notifications and is not accessible.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.138 |
trpzClientDynAuthorClientAddrTypeThe address type of 'trpzClientDynAuthorClientAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.139 |
trpzClientDynAuthorClientAddrThe dynamic authorization client IP address which caused the change of authorization. The type of this address is specified in 'trpzClientDynAuthorClientAddrType'. This object is used within notifications and is not accessible.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.140 |
trpzClientIpAddrTypeThe address type of 'trpzClientIpAddr'. Only the values 'ipv4(1)' and 'ipv6(2)' are reported. This object is used within notifications and is not accessible.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.141 |
trpzClientIpAddrIndicates an IP address of the client. The type of this address is specified in 'trpzClientIpAddrType'. This object is used within notifications and is not accessible.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.142 |
trpzClientIPv4AddrThe IPv4 address of the client. If the client does not use the IPv4 stack, or its IPv4 address has not yet been detected, then all octets will have the value 0. This object is used within notifications and is not accessible.ro InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.143 |
trpzClientIPv6LinkLocalAddrThe IPv6 link-local address of the client. If the client does not use the IPv6 stack, or its IPv6 link-local address has not yet been detected, then all octets will have the value 0. This object is used within notifications and is not accessible.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.14525.2.144 |
trpzApRadioIndexAP Radio index. Intended to replace 'trpzAPRadioNum'. This object is used within notifications and is not accessible.ro TrpzApRadioIndex (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.145 |
trpzClientRoamedFromAccessModeThe client access mode (ap, wired) that a client roamed from. This object is used within notifications and is not accessible. Obsoletes 'trpzClientRoamedFromAccessType'. (In 6.0, direct- and network-attached APs were unified.)ro TrpzClientAccessMode (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.146 |
trpzClientRoamedFromApNumThe number of the AP the client roamed from. Obsoletes 'trpzClientRoamedFromDAPNum'. This object is used within notifications and is not accessible.ro TrpzApNum (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.147 |
trpzClientRoamedFromRadioIndexThe index of the AP Radio the client roamed from. Obsoletes 'trpzClientRoamedFromRadioNum'. This object is used within notifications and is not accessible.ro TrpzApRadioIndex (TRAPEZE-NETWORKS-AP-TC) .1.3.6.1.4.1.14525.2.148 |
trpzClientRoamedFromPhysPortNumIdentifies the physical port on the AC used by the wired-auth client, before roam. Zero means the port is unknown or not applicable (for example, when trpzClientRoamedFromAccessMode = 'ap'). Obsoletes 'trpzClientRoamedFromPortNum'. This object is used within notifications and is not accessible.ro TrpzPhysPortNumberOrZero (TRAPEZE-NETWORKS-BASIC-TC) .1.3.6.1.4.1.14525.2.149 |
trpzClientDeviceTypeThe type of the client device. Is a zero length string if unknown. This object is used within notifications and is not accessible.ro TrpzClientDeviceType (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.150 |
trpzClientDeviceTypeOldThe type of the client device, before change. Is a zero length string if unknown. This object is used within notifications and is not accessible.ro TrpzClientDeviceType (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.151 |
trpzClientDeviceGroupThe group that the detected client device type belongs to. Is a zero length string if the device type is unknown. This object is used within notifications and is not accessible.ro TrpzClientDeviceGroupName (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.152 |
trpzClientDeviceProfileNameThe name of the device profile associated with the detected client device. A device profile is a collection of policies that apply to one or more types of client devices. Is a zero length string in 'detect-only' mode or if not set. In 'detect-only' mode policy enforcement is disabled. This object is used within notifications and is not accessible.ro TrpzClientDeviceProfileName (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.153 |
trpzClientDeviceProfileNameOldThe name of the device profile associated with the detected client device, before change. A device profile is a collection of policies that apply to one or more types of client devices. Is a zero length string in 'detect-only' mode or if not set. In 'detect-only' mode policy enforcement is disabled. This object is used within notifications and is not accessible.ro TrpzClientDeviceProfileName (TRAPEZE-NETWORKS-CLIENT-SESSION-TC) .1.3.6.1.4.1.14525.2.154 |
trpzClientDeviceProfileChangeReasonThe reason why the device profile changed. This object is used within notifications and is not accessible.ro TrpzClientDeviceProfileChangeReason .1.3.6.1.4.1.14525.2.155 |
trpzTrapMibNotifications emitted by Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2004-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.14525.4.1 |
trpzTrapsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.14525.5.0 |
trpzDeviceFailTrapThe device has a failure indication NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.1 |
trpzDeviceOkayTrapThe device has recovered NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.2 |
trpzPoEFailTrapPoE has failed on the indicated port NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.3 |
trpzApTimeoutTrapThe AP entering the AC at port trpzPortNum with MAC trpzRadioMacAddress and of the access type (ap or dap) has not responded. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'timeout'.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.4 |
trpzAPBootTrapThe AP entering the AC at port trpzPortNum with MAC trpzRadioMacAddress and of the access type (ap or dap) has booted. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'bootSuccess'.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.5 |
trpzMobilityDomainJoinTrapThe mobility domain member has received an UP notice from the remote address. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.6 |
trpzMobilityDomainTimeoutTrapThe mobility domain member has declared the remote address to be DOWN. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.7 |
trpzMpMichaelMICFailureTwo Michael MIC failures were seen within 60 seconds of each other. Obsoleted by trpzMichaelMICFailure.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.8 |
trpzRFDetectRogueAPTrapThis trap is sent when RF detection finds a rogue AP. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.9 |
trpzRFDetectAdhocUserTrapThis trap is sent when RF detection sweep finds a ad-hoc user. trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. trpzRFDetectListenerListInfo is a display string of a list of listener information. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.10 |
trpzRFDetectRogueDisappearTrapThis trap is sent when a rogue has disappeared. Obsoleted by trpzRFDetectRogueDeviceDisappearTrap.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.11 |
trpzClientAuthenticationFailureTrapThis trap is sent if a client authentication fails. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.12 |
trpzClientAuthorizationFailureTrapThis trap is sent if a client authorization fails. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.13 |
trpzClientAssociationFailureTrapThis trap is sent if a client association fails. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.14 |
trpzClientAuthorizationSuccessTrapThis trap is sent when a client authorizes. Obsoleted by trpzClientAuthorizationSuccessTrap5.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.15 |
trpzClientDeAssociationTrapThis trap is sent if a client de-association occurred. Obsoleted by trpzClientDeAssociationTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.16 |
trpzClientRoamingTrapThis trap is sent if a client roams from one location to another. Obsoleted by trpzClientRoamingTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.17 |
trpzAutoTuneRadioPowerChangeTrapThis trap is sent if a radio's power level has changed based on auto-tune. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.18 |
trpzAutoTuneRadioChannelChangeTrapThis trap is sent if a radio's channel has changed based on auto-tune. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.19 |
trpzCounterMeasureStartTrapThis trap is sent when counter measures are started against a rogue. trpzRFDetectXmtrMacAddr is the mac address of the rogue we are doing counter measures against. trpzRadioMACAddress identifies the radio performing the countermeasures. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.20 |
trpzCounterMeasureStopTrapThis trap is sent when counter measures are stopped against a rogue. trpzRFDetectXmtrMacAddr is the mac address of the rogue we were doing counter measures against. trpzRadioMACAddress identifies the radio performing the countermeasures. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.21 |
trpzClientDot1xFailureTrapThis trap is sent if a client failed 802.1X. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.22 |
trpzClientClearedTrapThis trap is sent when a client session is cleared. Obsoleted by trpzClientClearedTrap3.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.23 |
trpzClientAuthorizationSuccessTrap2This trap is sent when a client authorizes. Obsoleted by trpzClientAuthorizationSuccessTrap5.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.24 |
trpzRFDetectSpoofedMacAPTrapThis trap is sent when RF detection finds an AP using the MAC of the listener. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectDoSTrap and trpzRFDetectRogueDeviceTrap2. One of the two traps will be sent depending on the type of AP MAC spoofing detected.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.25 |
trpzRFDetectSpoofedSsidAPTrapThis trap is sent when RF detection finds an AP using the SSID of the listener, and the AP is not in the mobility domain. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent, depending on RF detection classification rules.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.26 |
trpzRFDetectDoSTrapThis trap is sent when RF detection finds a denial of service (DoS) occurring. trpzRFDetectDoSType specifies the type of DoS. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.27 |
trpzRFDetectClientViaRogueWiredAPTrapThis trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectClientViaRogueWiredAPTrap3.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.28 |
trpzRFDetectInterferingRogueAPTrapThis trap is sent when RF detection finds an interfering rogue AP. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectSuspectDeviceTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.29 |
trpzRFDetectInterferingRogueDisappearTrapThis trap is sent when an interfering rogue has disappeared. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. Obsoleted by trpzRFDetectSuspectDeviceDisappearTrap.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.30 |
trpzRFDetectUnAuthorizedSsidTrapThis trap is sent when RF detection finds use of an unauthorized SSID. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized SSID is classified as rogue or suspect because of this.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.31 |
trpzRFDetectUnAuthorizedOuiTrapThis trap is sent when RF detection finds use of an unauthorized OUI. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized OUI is classified as rogue or suspect because of this.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.32 |
trpzRFDetectUnAuthorizedAPTrapThis trap is sent when RF detection finds operation of an unauthorized AP. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.33 |
trpzDAPConnectWarningTrapA DAP, tried to connect to the AC. trpzDeviceModel provides the model of the DAP. trpzDeviceSerNum provides the serial number of the DAP. trpzRsaPubKeyFingerPrint provides the computed fingerprint of the DAP. trpzDAPconnectWarningType provides the type of connect warning. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'connectFail'.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.34 |
trpzRFDetectDoSPortTrapThis trap is sent when RF detection finds a denial of service (DoS) occurring. This has port and AP info instead of 'Listener info'. trpzRFDetectDoSType specifies the type of DoS. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzClientAccessType specifies whether wired, AP, or DAP. trpzPortNum (for wired or AP), the port that is used. trpzDAPNum (for a DAP), the ID of the DAP. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.35 |
trpzMpMichaelMICFailure2Two Michael MIC failures were seen within 60 seconds of each other. Object trpzClientMACAddress is the source of the first failure, and object trpzClientMACAddress2 source of the second failure. Obsoleted by trpzMichaelMICFailure.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.36 |
trpzApNonOperStatusTrapThis trap is sent when the AP changes state and the new one is a non-operational state. Obsoleted by trpzApNonOperStatusTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.37 |
trpzApOperRadioStatusTrapThis trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by trpzApOperRadioStatusTrap3.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.38 |
trpzClientIpAddrChangeTrapThis trap is sent when a client's IP address changes. The most likely case for this is when the client first connects to the network. Obsoleted by trpzClientIpAddrChangeTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.39 |
trpzClientAssociationSuccessTrapThis trap is sent if a client association succeeds. WARNING: DO NOT enable it in normal use. It may impair switch performance! Only recommended for debugging network issues. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.40 |
trpzClientAuthenticationSuccessTrapThis trap is sent if a client authentication succeeds. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.41 |
trpzClientDeAuthenticationTrapThis trap is sent if a client de-authentication occurred. Obsoleted by trpzClientDeAuthenticationTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.42 |
trpzRFDetectBlacklistedTrapThis trap is sent if an association, re-association or de-association request (packet) is detected from a blacklisted transmitter (identified by MAC: 'trpzRFDetectXmtrMacAddr'). If 'trpzBlacklistingCause' is 'configured', then 'trpzBlacklistingRemainingTime' will be zero, meaning indefinite time (depending on administrative actions on the Black List). Otherwise, 'trpzBlacklistingRemainingTime' will indicate the time in seconds until this transmitter's requests could be allowed. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.43 |
trpzRFDetectClientViaRogueWiredAPTrap2This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. Obsoleted by trpzRFDetectClientViaRogueWiredAPTrap3.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.44 |
trpzRFDetectAdhocUserDisappearTrapThis trap is sent when RF detection sweep finds that an ad-hoc user disappeared. trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.45 |
trpzApRejectLicenseExceededTrapThis trap is sent when an AC (wireless switch) receives a packet from an inactive AP and attaching that AP would make the AC exceed the maximum (licensed) number of active APs. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.46 |
trpzClientDynAuthorChangeSuccessTrapThis trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client. Obsoleted by trpzClientDynAuthorChangeSuccessTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.47 |
trpzClientDynAuthorChangeFailureTrapThis trap is sent if a change of authorization request sent by an authorized dynamic authorization client is unsuccessful. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.48 |
trpzClientDisconnectTrapThis trap is sent when a client session is terminated administratively. Obsoleted by trpzClientDisconnectTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.49 |
trpzMobilityDomainFailOverTrapThis trap is sent when the Mobility Domain fails over to the secondary seed. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.50 |
trpzMobilityDomainFailBackTrapThis trap is sent when the Mobility Domain fails back to the primary seed. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.51 |
trpzRFDetectRogueDeviceTrapThis trap is sent when RF detection finds a rogue device. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as rogue. Obsoleted by trpzRFDetectRogueDeviceTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.52 |
trpzRFDetectRogueDeviceDisappearTrapThis trap is sent when a rogue device has disappeared. This trap obsoletes the trpzRFDetectRogueDisappearTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.53 |
trpzRFDetectSuspectDeviceTrapThis trap is sent when RF detection finds a suspect device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as suspect. Obsoleted by trpzRFDetectSuspectDeviceTrap2.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.54 |
trpzRFDetectSuspectDeviceDisappearTrapThis trap is sent when a suspect device has disappeared. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. This trap obsoletes the trpzRFDetectInterferingRogueDisappearTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.55 |
trpzRFDetectClientViaRogueWiredAPTrap3This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. ClassificationReason indicates the reason why the AP is classified as rogue. This trap obsoletes the trpzRFDetectClientViaRogueWiredAPTrap and trpzRFDetectClientViaRogueWiredAPTrap2. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.56 |
trpzRFDetectClassificationChangeTrapThis trap is sent when RF detection classification rules change. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.57 |
trpzConfigurationSavedTrapThis trap is sent when the running configuration of the switch is written to a configuration file. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.58 |
trpzApNonOperStatusTrap2This trap is sent when the AP changes state and the new one is a non-operational state. Obsoletes trpzApNonOperStatusTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.59 |
trpzApOperRadioStatusTrap2This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by trpzApOperRadioStatusTrap3.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.60 |
trpzMichaelMICFailureTwo Michael MIC failures were seen within 60 seconds of each other. Object trpzClientMACAddress indicates the source of the first failure, and object trpzClientMACAddress2 indicates the source of the second failure. Service is interrupted for 60 seconds on the radio due to TKIP countermeasures having commenced. The radio is identified by trpzApNum and trpzAPRadioNum. An alternative way to identify the radio is trpzRadioMACAddress. Obsoletes trpzMpMichaelMICFailure and trpzMpMichaelMICFailure2. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.61 |
trpzClientAuthorizationSuccessTrap3This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzAPRadioNum, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by trpzClientAuthorizationSuccessTrap5.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.62 |
trpzApManagerChangeTrapThis trap is sent when the AP's secondary link becomes its primary link. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.63 |
trpzClientClearedTrap2This trap is sent when a client session is cleared. Obsoleted by trpzClientClearedTrap3.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.64 |
trpzMobilityDomainResiliencyStatusTrapThis trap is sent by a mobility domain seed to announce changes in resilient capacity status. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.65 |
trpzApOperRadioStatusTrap3This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoletes trpzApOperRadioStatusTrap and trpzApOperRadioStatusTrap2. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.66 |
trpzClientAuthorizationSuccessTrap4This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzAPRadioNum, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; trpzClientRadioType gives the type of radio used by this client. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by trpzClientAuthorizationSuccessTrap5.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.67 |
trpzRFDetectRogueDeviceTrap2This trap is sent when RF detection finds a rogue device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (rogue device). trpzRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (rogue device). trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectClassificationReason indicates the reason why the device is classified as rogue. Obsoletes trpzRFDetectRogueAPTrap, trpzRFDetectUnAuthorizedAPTrap, trpzRFDetectRogueDeviceTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.68 |
trpzRFDetectSuspectDeviceTrap2This trap is sent when RF detection finds a suspect device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (suspect device). trpzRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (suspect device). trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectClassificationReason indicates the reason why the device is classified as suspect. Obsoletes trpzRFDetectInterferingRogueAPTrap, trpzRFDetectSuspectDeviceTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.69 |
trpzClusterFailureTrapThis trap is sent when the cluster configuration failed to apply. If trpzClusterFailureReason = 'validation-error': The validation error is reported by the receiving end of the configuration updates. The receiving end can be any AC (switch) in the mobility domain: member, secondary seed or primary seed. - Primary seed will be the receiving end of configuration updates when Primary seed is joining the cluster and Secondary seed has preempt mode enabled. - Both Secondary seed and member will be at the receiving end when Primary seed is active. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.70 |
trpzMultimediaCallFailureTrapThis trap is sent when a multimedia call fails. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.71 |
trpzApTunnelLimitExceededTrapThis trap is sent by the AP primary controller (PAM) when an AP rejects a tunnel creation request because it has already created the maximum number of tunnels it can support. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.72 |
trpzWsTunnelLimitExceededTrapThis trap is sent when the AC (wireless switch) rejects a tunnel creation request because it has reached the maximum number of tunnels supported (indicated by 'trpzWsTunnelLimit'). When trpzWsTunnelLimitType = 'platform-tunnel-limit' (2) the AC has reached the maximum tunnel capacity, which depends on the platform. When trpzWsTunnelLimitType = 'ap-ws-tunnel-limit' (3) the AC has reached the AP-to-switch tunnels limit, which depends on the current situation of the AC (mobility domain, network domain, network resiliency status). NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.73 |
trpzRFNoiseSourceTrapThis trap is sent upon the appearance of a new noise source. 'trpzRadioMACAddress' indicates the listener (the AP radio reporting the noise). A given combination of noise source ID, listener and channel should trigger this trap at most once every 15 minutes. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.74 |
trpzM2UConvNotPossibleTrapThis trap is sent when multicast to unicast conversion is enabled on the AP, but cannot be performed. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.75 |
trpzM2UConvAvailabilityRestoredTrapThis trap is sent when the multicast to unicast conversion can be resumed on the AP, after disruption. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.76 |
trpzAutoTuneSuccessTrapThis trap is sent when an auto-tune operation completed successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.77 |
trpzAutoTuneFailureTrapThis trap is sent when an auto-tune operation failed to complete. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.78 |
trpzClientDeAssociationTrap2This trap is sent if a client de-association occurred. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client before deassociation; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDeAssociationTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.79 |
trpzClientRoamingTrap2This trap is sent if a client roams from one location to another. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client, after roam; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client, after roam. Obsoletes trpzClientRoamingTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.80 |
trpzClientIpAddrChangeTrap2This trap is sent when an IP address of a client changes. The most likely cases for this are when the client first connects to the network and when a new IPv6 global address is assigned to the client. The pair of objects trpzClientIpAddrType/trpzClientIpAddr indicates the type and the value of the new IP address. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientIpAddrChangeTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.81 |
trpzClientDeAuthenticationTrap2This trap is sent if a client de-authentication occurred. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDeAuthenticationTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.82 |
trpzClientDynAuthorChangeSuccessTrap2This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDynAuthorChangeSuccessTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.83 |
trpzClientDisconnectTrap2This trap is sent when a client session is terminated administratively. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDisconnectTrap. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.84 |
trpzClientClearedTrap3This trap is sent when a client session is cleared. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientClearedTrap, trpzClientClearedTrap2. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.85 |
trpzClientAuthorizationSuccessTrap5This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; trpzClientRadioType gives the type of radio used by this client. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientAuthorizationSuccessTrap, trpzClientAuthorizationSuccessTrap2, trpzClientAuthorizationSuccessTrap3, trpzClientAuthorizationSuccessTrap4. NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.86 |
trpzClientDeviceTypeChangeTrapThis trap is sent when the detected device type of a client changes. The new device type is indicated by trpzClientDeviceType. trpzClientDeviceGroup indicates the group that the new device type belongs to. As of release 8.0, device detection is done only for wireless clients (trpzClientAccessMode = 'ap'). NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.87 |
trpzClientDeviceProfileChangeTrapThis trap is sent when the device profile for a client device changes. The new device profile is indicated by trpzClientDeviceProfileName. trpzClientDeviceProfileChangeReason indicates the reason why the device profile changed. As of release 8.0, device detection is done only for wireless clients (trpzClientAccessMode = 'ap'). NOTIFICATION-TYPE .1.3.6.1.4.1.14525.5.0.88 |