TRAPEZE-NETWORKS-PORT-MIB
The TRAPEZE-NETWORKS-PORT-MIB provides SNMP-based monitoring and management of physical and logical port states, traffic statistics, and error counters on Trapeze Networks wireless LAN controllers and access points. It enables the collection of interface-level metrics such as octet counts, packet drops, and link status to facilitate network performance analysis and fault isolation.
Imported Objects
Objects
14 total| Object Name |
|---|
trpzPortMibPort information MIB. Copyright 2006-2008 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.14525.4.6 |
trpzPortObjects OBJECT IDENTIFIER .1.3.6.1.4.1.14525.4.6.1 |
trpzPortDataObjects OBJECT IDENTIFIER .1.3.6.1.4.1.14525.4.6.1.1 |
trpzPortConfigTablePort configuration table SEQUENCE OF TrpzPortConfigEntry .1.3.6.1.4.1.14525.4.6.1.1.1 |
trpzPortConfigEntryPort configuration entry TrpzPortConfigEntry .1.3.6.1.4.1.14525.4.6.1.1.1.1 |
trpzPortConfigPortNumberPhysical Port Number TrpzPhysPortNumber (TRAPEZE-NETWORKS-BASIC-TC) .1.3.6.1.4.1.14525.4.6.1.1.1.1.1 |
trpzPortConfigPortModeIndicates whether this port is configured for directly attached AP, as network port, or for wired auth.ro TrpzPortMode .1.3.6.1.4.1.14525.4.6.1.1.1.1.2 |
trpzPortConfigPoeModeIndicates whether this port is configured to supply PoE (Power over Ethernet).ro TrpzPortPoeMode .1.3.6.1.4.1.14525.4.6.1.1.1.1.3 |
trpzPortConfigTrunkMasterThe master port of the group this port belongs to (identified by the physical port number). A zero value means information is not available (usually if this port is not part of any port group).ro TrpzPhysPortNumberOrZero (TRAPEZE-NETWORKS-BASIC-TC) .1.3.6.1.4.1.14525.4.6.1.1.1.1.4 |
trpzPortConformance OBJECT IDENTIFIER .1.3.6.1.4.1.14525.4.6.1.2 |
trpzPortCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.14525.4.6.1.2.1 |
trpzPortComplianceThe compliance statement for devices that implement the Port MIB. Unknown .1.3.6.1.4.1.14525.4.6.1.2.1.1 |
trpzPortGroups OBJECT IDENTIFIER .1.3.6.1.4.1.14525.4.6.1.2.2 |
trpzPortConfigGroupMandatory group of objects implemented to provide Port configuration info. Unknown .1.3.6.1.4.1.14525.4.6.1.2.2.1 |
More MIBs from Trapeze
Browse all TrapezeMIBs →The TRAPEZE-NETWORKS-AP-CONFIG-MIB enables SNMP-based configuration management of Trapeze Networks wireless Access Controllers (ACs) to retrieve and modify Access Point (AP) operational parameters, including radio settings, security policies, and interface configurations. This module facilitates centralized provisioning and state monitoring of the AP infrastructure by exposing specific configuration objects required for network device administration.
The TRAPEZE-NETWORKS-TRAP-MIB defines the SNMP notification set for Trapeze Networks wireless access controllers (ACs) and access points (APs), enabling the monitoring of critical infrastructure events such as device state transitions, link failures, authentication anomalies, and hardware faults. These traps facilitate real-time alerting for network operations centers to detect and respond to wireless network instability, controller availability issues, and AP connectivity disruptions without polling overhead.
The TRAPEZE-NETWORKS-AP-STATUS-MIB enables SNMP monitoring of operational states and performance metrics for Access Points connected to Trapeze Networks wireless switches. This module facilitates the tracking of AP connectivity status, association counts, and radio interface health to ensure the integrity of the managed wireless infrastructure.
The TRAPEZE-NETWORKS-CLIENT-SESSION-MIB enables SNMP monitoring of active wireless client associations, session states, and throughput statistics on Trapeze Networks Access Controllers (wireless switches). This module provides granular visibility into per-Access Point client session metrics, including connection counts, authentication status, and data transfer volumes for network capacity planning and troubleshooting.
The TRAPEZE-NETWORKS-TRAPLOG-MIB provides read-only access to a circular buffer of recent SNMP trap events generated by Trapeze Networks Access Controllers, enabling the retrospective analysis of detected network anomalies. This module facilitates the monitoring of historical device alerts without supporting configuration of logging filters or resource limits, and it offers no persistence guarantees across SNMP agent restarts.
The TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB enables SNMP monitoring of radio frequency interference detection and rogue access point identification metrics on Trapeze Networks wireless LAN controllers. It provides specific counters and status indicators for detecting unauthorized RF signals and classifying detected threats within the managed wireless infrastructure.