TNPP-OPT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
89
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
89 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PPCTTNPPPortTableThis table contains the TNPP port configuration
parameters. SEQUENCE OF Cdx6500PPCTTNPPPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.32 |
cdx6500PPCTTNPPPortEntryEntries in the TNPP port configuration table. Cdx6500PPCTTNPPPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.32.1 |
tnppPCfgPortNumberPort Number of the TNPP port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.32.1.1 |
tnppPCfgPortTypeSpecifies the type of access protocol for
this port.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.2 |
tnppPCfgPortSpeedSpecifies port speed in bits per second.
speed300 : 300 bits per second.
speed1200 : 1200 bits per second.
speed2400 : 2400 bits per second.
speed4800 : 4800 bits per second.
speed9600 : 9600 bits per second.
speed19200 : 19200 bits per second.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.3 |
tnppPCfgCallControlSpecifies the mode for X.25 call generation.
dtr - X.25 call is generated when DTR is up.
Connection type between TNPP PAD and
Paging Terminal is DTR.
dataDrv - X.25 call is generated on incoming data.
Connection type between TNPP PAD and
Paging Terminal is SIMP.
powerOn - X.25 call is generated on Node Boot/Power On.
Connection type between TNPP PAD and
Paging Terminal is SIMP.
nc - Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.4 |
tnppPCfgCRCOptionSpecifies the CRC option.
normal - 2 bytes binary CRC.
transp - 4 bytes ASCII CRC.
nc - Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.5 |
tnppPCfgTANControlSpecifies whether to accept control characters(ACK/NAK)
in the frame.
mps2000Mode - Do not accept embedded control characters
in the frame.
unipageMode - Accept embedded control characters
in the frame.
nc - Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.6 |
tnppPCfgCANReportsSpecifies whether to log reports generated by TNPP PAD.
no - Reports generated due to CANcel frame will not
be logged.
yes - Reports generated due to CANcel frame will be
logged which will be controlled by node
parameter.
nc - Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.7 |
tnppPCfgRSCountTNPP PAD port will flow control the X.25 channel when
the number of RSed frames on hold remains at or above
the configured value of this parameter.
Specifies the limit for RS support by TNPP PAD.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.32.1.8 |
tnppPCfgMaxRSCountTNPP PAD port will stop transmission of any new frame
to the paging terminal if the number of frames on hold
remains above the value of this parameter. Transmission
of control frames and retransmission of RS timed out
frames will continue.
Specifies the maximum number of RS that can be received
before the TNPP PAD stops transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.32.1.9 |
tnppPCfgRSSupportSpecifies whether to respond with RS to local paging
terminal in case of X25 link being blocked.
no - RS is not transmitted.
yes - RS is transmitted.
nc - Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.10 |
tnppPCfgAutocallMnemonicThis parameter refers to the remote address which
will be called by the TNPP PAD port.
Specifies the Mnemonic Address for Autocall.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.32.1.11 |
tnppPCfgAutocallTimeoutThis parameter is the time interval in seconds
between call attempts when auto calling.
Specifies the time value for retrying AUTOCALL
in seconds.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.32.1.12 |
tnppPCfgMaxAutocallAttemptSpecifies the number of Autocall attempts.
0 - No Autocall retry limit.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.32.1.13 |
tnppPCfgProtectionLevelThis specifies the level of data or connection
protection which will be applied to calls to or
from this port. The actual level for a call will
be negotiated to the lesser of this level and the
level configured for the other end of the call.
none - No protection.
cpOnly - Connection protection only.
fullDcp - Full data and connection protection.
nc - Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.14 |
tnppPCfgReconnTimeoutThis specifies the number of seconds that DCP on the
originating side will wait between reconnection
attempts.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.32.1.15 |
tnppPCfgMaxReconnAttemptThis specifies the number of times that DCP on the
orginating side will attempt to reconnect before
clearing the call. If the value is zero no attempt
to reconnect will be made.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.32.1.16 |
tnppPCfgElectricalInterfaceTypeSpecify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical Interface Type
NONE - Electrically disabledro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.17 |
tnppPCfgV24ElectricalInterfaceOptionSpecify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signalro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.18 |
tnppPCfgHighSpeedElectricalInterfaceOptionSpecify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cablero Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.32.1.19 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PPSTTNPPPStatTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1.33 |
tnppPGenStatTableThis table contains the port statistics
general parameters. SEQUENCE OF TNPPPGenStatEntry .1.3.6.1.4.1.449.2.1.3.1.1.33.1 |
tnppPGenStatEntryEntries in the TNPP port statistics
general parameters table. TNPPPGenStatEntry .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1 |
tnppPGStatPortNumberPort Number of the TNPP port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.1 |
tnppPGStatPortTypeThis indicates the type of access protocol
for this port.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.2 |
tnppPGStatPortStatusThis indicates the operational status of the port.
disabled : port is disabled.
up : port is up.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.3 |
tnppPGStatPortSpeedThis indicates the port speed in bits per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.4 |
tnppPGStatPortUtilInThis indicates the port utilization for the line to
port direction.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.5 |
tnppPGStatPortUtilOutThis indicates the port utilization for the port to
line direction.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.6 |
tnppPGStatParityErrorsThis indicates the number of parity errors counted
by the I/O driver.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.7 |
tnppPGStatOverrunErrorsThis indicates number of overrun errors
detected by the I/O driver.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.8 |
tnppPGStatFramingErrorsThis indicates number of framing errors
detected by the I/O driver.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.9 |
tnppPGStatLocalDTEStateThis indicates the local DTE state.
active - DTE is active.
down - DTE is down.
na - Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.10 |
tnppPGStatRemoteDTEStateThis indicates the remote DTE state.
active - DTE is active.
down - DTE is down.
na - Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.11 |
tnppPGStatRemotePadQThis indicates the size of the remote
TNPP PAD queue.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.12 |
tnppPGStatLocalTerminalQThis indicates the size of the Local Terminal queue.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.13 |
tnppPGStatReadyQThis indicates the size of the Ready Queue.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.14 |
tnppPGStatHoldQThis indicates the size of the Hold Queue.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.15 |
tnppPDataSummaryStatTableThis table contains the TNPP port statistics
data summary parameters. SEQUENCE OF TNPPPDataSummaryStatEntry .1.3.6.1.4.1.449.2.1.3.1.1.33.2 |
tnppPDataSummaryStatEntryEntries in the TNPP port statistics data summary table. TNPPPDataSummaryStatEntry .1.3.6.1.4.1.449.2.1.3.1.1.33.2.1 |
tnppPDSStatPortNumberPort Number of the TNPP port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.1 |
tnppPDSStatTotalCharInThis indicates the total number of characters
that have been received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.2 |
tnppPDSStatTotalCharOutThis indicates the total number of characters
that have been transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.3 |
tnppPDSStatTotalFramesInThis indicates the total number of frames that
have been received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.4 |
tnppPDSStatTotalFramesOutThis indicates the total number of frames
that have been transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.5 |
tnppPDSStatCharInPerSecThis indicates the rate at which characters
have been received by the port per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.6 |
tnppPDSStatCharOutPerSecThis indicates the rate at which characters
have been transmitted by the port per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.7 |
tnppPDSStatFramesInPerSecThis indicates the rate at which frames have
been received by the port per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.8 |
tnppPDSStatFramesOutPerSecThis indicates the rate at which frames have
been transmitted by the port per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.9 |
tnppPFrameSummaryStatTableThis table contains the TNPP port statistics
frame summary parameters. SEQUENCE OF TNPPPFrameSummaryStatEntry .1.3.6.1.4.1.449.2.1.3.1.1.33.3 |
tnppPFrameSummaryStatEntryEntries in the TNPP port statistics frame summary table. TNPPPFrameSummaryStatEntry .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1 |
tnppPFSStatPortNumberPort number of the TNPP port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.1 |
tnppPFSStatLinkStateThis indicates the current link state.
init - Initialization state.
awaitEnqResp - Await enquiry response state.
ready - Ready to communicate state.
transmitting - Transmitting state.
transmitResponse - Transmit response state.
na - Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.2 |
tnppPFSStatCRCErrorsThis indicates the total number of TNPP frames
received with Cyclic Redundancy Check errors .ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.3 |
tnppPFSStatLinkFramingErrorsThis indicates the total number of TNPP framing
errors occured (Invalid Header, Invalid Control
character, Frame Size Exceeded, Incomplete Frame,
etc.,) .ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.4 |
tnppPFSStatProtocolErrorsThis indicates the number of protocol errors
due to unexpected events.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.5 |
tnppPFSStatACKFramesInThis indicates the total number of Acknowledgment
frames received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.6 |
tnppPFSStatACKFramesOutThis indicates the total number of Acknowledgment
frames transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.7 |
tnppPFSStatNAKFramesInThis indicates the total number of Negative
Acknowledgment frames received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.8 |
tnppPFSStatNAKFramesOutThis indicates the total number of Negative
Acknowledgment frames transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.9 |
tnppPFSStatRSFramesInThis indicates the total number of Request to Stop
frames received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.10 |
tnppPFSStatRSFramesOutThis indicates the total number of Request to Stop
frames transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.11 |
tnppPFSStatCANFramesInThis indicates the total number of CANcel report
frames received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.12 |
tnppPFSStatCANFramesOutThis indicates the total number of CANcel report
frames transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.13 |
tnppPFSStatEOTFramesInThis indicates the total number of End of Transmission
frames received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.14 |
tnppPFSStatEOTFramesOutThis indicates the total number of End of Transmission
frames transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.15 |
tnppPFSStatENQFramesInThis indicates the total number of Enquiry
frames received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.16 |
tnppPFSStatENQFramesOutThis indicates the total number of Enquiry
frames transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.17 |
tnppPFSStatDataFramesInPassedThis indicates the total number of valid
data frames received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.18 |
tnppPFSStatDataFramesOutPassedThis indicates the total number of valid
data frames transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.19 |
tnppPFSStatDataFramesInDiscardedThis indicates the total number of data frames
received by the port and discarded.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.20 |
tnppPFSStatDataFramesOutDiscardedThis indicates the total number of data frames
transmitted by the port and discarded.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.21 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |
cdx6500ContTNPPTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4.15 |
cdx6500ContTNPPPortTableThis table contains the TNPP Port Control parameters. SEQUENCE OF Cdx6500ContTNPPPortEntry .1.3.6.1.4.1.449.2.1.4.15.1 |
cdx6500ContTNPPPortEntryEntries in the TNPP Port Control Table. Cdx6500ContTNPPPortEntry .1.3.6.1.4.1.449.2.1.4.15.1.1 |
tnppPContPortNumberPort number of the TNPP port. INTEGER .1.3.6.1.4.1.449.2.1.4.15.1.1.1 |
tnppPContPortControlControl operations for the specified TNPP port.
boot - Boots the TNPP Port.
enable - Enables the TNPP Port.
disable - Disables the TNPP Port.
busyout - Busyout the TNPP Port.
resetstats - Resets the TNPP port statistics.rw Enumeration .1.3.6.1.4.1.449.2.1.4.15.1.1.2 |