TN-UDLD-MIB
The TN-UDLD-MIB module enables monitoring and management of Unidirectional Link Detection (UDLD) protocol states and error counters on Extreme Networks (formerly Avaya) switching hardware. It specifically tracks UDLD neighbor relationships, link status transitions, and aggressive mode failure events to detect and isolate unidirectional fiber or copper link failures.
Imported Objects
Objects
19 total| Object Name |
|---|
tnUdldMibThis is a private MIB for udld MODULE-IDENTITY .1.3.6.1.4.1.868.2.5.124 |
tnUdldConfigInterfaceParamTableThis is a table of udld interface conf parameters SEQUENCE OF TNUdldConfigInterfaceParamEntry .1.3.6.1.4.1.868.2.5.124.1 |
tnUdldConfigInterfaceParamEntryEach physical interface has a set of configurable parameters TNUdldConfigInterfaceParamEntry .1.3.6.1.4.1.868.2.5.124.1.1 |
tnUdldConfigInterfaceParamIfIndexLogical interface number. TNInterfaceIndex (TN-TC) .1.3.6.1.4.1.868.2.5.124.1.1.1 |
tnUdldConfigInterfaceParamUdldModePort udld mode disable/normal/aggresive. disable(0), normal(1), aggressive(2)rw TNUdldMode .1.3.6.1.4.1.868.2.5.124.1.1.2 |
tnUdldConfigInterfaceParamProbeMsgIntervalPort probe message interval(seconds). Valid range: 7 to 90 seconds.rw Unsigned32 .1.3.6.1.4.1.868.2.5.124.1.1.3 |
tnUdldStatusInterfaceTableThis is a table of udld interface local device information SEQUENCE OF TNUdldStatusInterfaceEntry .1.3.6.1.4.1.868.2.5.124.2 |
tnUdldStatusInterfaceEntryEach udld enabled interface has a local device information TNUdldStatusInterfaceEntry .1.3.6.1.4.1.868.2.5.124.2.1 |
tnUdldStatusInterfaceIfIndexLogical interface number. TNInterfaceIndex (TN-TC) .1.3.6.1.4.1.868.2.5.124.2.1.1 |
tnUdldStatusInterfaceDeviceIDLocal device id.ro TNDisplayString .1.3.6.1.4.1.868.2.5.124.2.1.2 |
tnUdldStatusInterfaceDeviceNameLocal device name.ro TNDisplayString .1.3.6.1.4.1.868.2.5.124.2.1.3 |
tnUdldStatusInterfaceLinkStateLocal device link detected state.ro TNUdldDetectionState .1.3.6.1.4.1.868.2.5.124.2.1.4 |
tnUdldStatusInterfaceNeighborTableThis is a table of udld interface neighbor cache information SEQUENCE OF TNUdldStatusInterfaceNeighborEntry .1.3.6.1.4.1.868.2.5.124.3 |
tnUdldStatusInterfaceNeighborEntryEach udld enabled interface has a neighbor cache information TNUdldStatusInterfaceNeighborEntry .1.3.6.1.4.1.868.2.5.124.3.1 |
tnUdldStatusInterfaceNeighborIfIndexLogical interface number. TNInterfaceIndex (TN-TC) .1.3.6.1.4.1.868.2.5.124.3.1.1 |
tnUdldStatusInterfaceNeighborNeighborDeviceIDNeighbor device id.ro TNDisplayString .1.3.6.1.4.1.868.2.5.124.3.1.2 |
tnUdldStatusInterfaceNeighborNeighborPortIDNeighbor port id.ro TNDisplayString .1.3.6.1.4.1.868.2.5.124.3.1.3 |
tnUdldStatusInterfaceNeighborNeighborDeviceNameNeighbor device name.ro TNDisplayString .1.3.6.1.4.1.868.2.5.124.3.1.4 |
tnUdldStatusInterfaceNeighborLinkDetectionStateNeighbor device link detected state.ro TNUdldDetectionState .1.3.6.1.4.1.868.2.5.124.3.1.5 |
More MIBs from Transition
Browse all TransitionMIBs →SNMP MIB module
The TN-MPLS-MIB module enables the monitoring and configuration of Multiprotocol Label Switching (MPLS) parameters, including label bindings, forwarding equivalence classes, and tunnel states, on Nokia (formerly Alcatel-Lucent) Service Router and IP/MPLS network devices.
Standard SNMP MIB module defining data structures for TNI-MIB.
The TN-CES-MIB module enables monitoring and management of Circuit Emulation Service (CES) sessions on network equipment, specifically tracking performance metrics such as session status, packet loss, jitter, and synchronization errors for T1/E1 circuit emulation over packet-switched networks.
The TN-LLDP-MIB module enables monitoring and management of Link Layer Discovery Protocol (LLDP) neighbor discovery data, including system identification, port descriptions, and TLV (Type-Length-Value) attributes, on Trellix (formerly McAfee) network infrastructure devices. This private MIB extension facilitates the collection of LLDP session states and neighbor topology information for network inventory and connectivity verification.
The TN-DHCP-SERVER-MIB enables monitoring and management of Dynamic Host Configuration Protocol server configurations, lease states, and address pool utilization on Tanaza network infrastructure devices. This module provides visibility into DHCP scope assignments, client binding tables, and server operational status to facilitate network address administration.