TN-PROV-MIB
AI MIB Summary
The TN-PROV-MIB module facilitates the configuration backup and restore operations for Trend Networks provisioning devices via SNMP. It exposes specific management objects to capture device configuration states and execute recovery procedures to ensure service continuity.
The mib for configuration backup and restore of the device.
Main OID:
tnProvMIB.1.3.6.1.4.1.868.2.5.110
12
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
12 total| Object Name |
|---|
tnProvMIBThe mib for configuration backup and restore of the device. MODULE-IDENTITY .1.3.6.1.4.1.868.2.5.110 |
tnProvObjects OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.110.1 |
tnProvGroup OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.110.1.1 |
tnProvTableThis table displays and sets backup/restore configuration of individual device. SEQUENCE OF TnProvEntry .1.3.6.1.4.1.868.2.5.110.1.1.1 |
tnProvEntryThis entry represents a provision configuration of individual device. TnProvEntry .1.3.6.1.4.1.868.2.5.110.1.1.1.1 |
tnProvTypeProvision operation type: backup/download(1) : backup/download the configuration of the device. restore/upload(2) : restore/upload the configuration onto the device. saveStartupConfig(3) : copies running-config to startup-config, thereby ensuring that the currently active configuration will be used at the next reboot. activate(4) : It is possible to activate any of the configuration files present on the switch, except for running-config which represents the currently active configuration. delete(5) : It is possible to delete any of the writable files stored in flash, including startup-config. If this is done and the switch is rebooted without a prior Save operation, this effectively resets the switch to default configuration. running-config and default-config cannot be deleted.rw Enumeration .1.3.6.1.4.1.868.2.5.110.1.1.1.1.1 |
tnProvAddrTypeThe target device IP address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.868.2.5.110.1.1.1.1.2 |
tnProvAddrThe target device IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.868.2.5.110.1.1.1.1.3 |
tnProvFiletnProvFile is used to specify the configuration file. This field is used in combination with tnProvType as below: For Download/backup(1), source file name on the switch. For Upload/restore(2), source file name on the ftp server. For saveStartupConfig(3), it is ignored. For activate(4), it is the file on the switch to be actiavted (except running-config file). For delete(5), it is the file wname to be delete from the switch.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.110.1.1.1.1.4 |
tnProvOperProvision operation type: start(1) : start provision operation. doNothing(2) : just read value. tnProvOper should be the last object to be set for the operation. That means when you set it to 'start', the operation specified in tnProvType will be triggerd.rw Enumeration .1.3.6.1.4.1.868.2.5.110.1.1.1.1.5 |
tnProvResultProvision operation type: success(1) : provision process succeeded. fail(2) : provision process failed. inProgress(3): provision is in progress.ro Enumeration .1.3.6.1.4.1.868.2.5.110.1.1.1.1.6 |
tnProvDstFiletnProvDstFile specifies the target file name. For Download/backup(1), destination file name on the ftp server. For Upload/restore(2), destination file name on the switch. For saveStartupConfig(3), it is ignored. For activate(4), it is ignored. For delete(5), it is ignored.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.110.1.1.1.1.7 |